Supramolecular Cu(ii) nanoparticles supported on a functionalized chitosan containing urea and thiourea bridges as a recoverable nanocatalyst for efficient synthesis of 1H-tetrazoles

A cost-effective and convenient method for supporting of Cu(ii) nanoparticles on a modified chitosan backbone containing urea and thiourea bridges using thiosemicarbazide (TS), pyromellitic dianhydride (PMDA) and toluene-2,4-diisocyanate (TDI) linkers was designed. The prepared supramolecular (CS-TDI-PMDA-TS-Cu(ii)) nanocomposite was characterized by using Fourier-transform infrared (FT-IR) spectroscopy, field emission scanning electron microscopy (FESEM), thermogravimetry/differential thermogravimetry analysis (TGA/DTA), energy-dispersive X-ray spectroscopy (EDS), EDS elemental mapping and X-ray diffraction (XRD). The obtained supramolecular CS-TDI-PMDA-TS-Cu(ii) nanomaterial was demonstrated to act as a multifunctional nanocatalyst for promoting of multicomponent cascade Knoevenagel condensation/click 1,3-dipolar azide-nitrile cycloaddition reactions very efficiently between aromatic aldehydes, sodium azide and malononitrile under solvent-free conditions and affording the corresponding (E)-2-(1H-tetrazole-5-yl)-3-arylacrylenenitrile derivatives. Low catalyst loading, working under solvent-free conditions and short reaction time as well as easy preparation and recycling, and reuse of the catalyst for five consecutive cycles without considerable decrease in its catalytic efficiency make it a suitable candidate for the catalytic reactions promoted by Cu species.

Supramolecular Pd@methioine-EDTA-chitosan nanocomposite: an effective and recyclable bio-based and eco-friendly catalyst for the green Heck cross-coupling reaction under mild conditions

Supramolecular palladium(ii) supported on modified chitosan by dl-methionine using an ethylenediaminetetraacetic acid linker (Pd@MET-EDTA-CS) was designed and prepared through a simple procedure. The structure of this novel supramolecular nanocomposite was characterized by different spectroscopic, microscopic and analytical techniques including FTIR, EDX, XRD, FESEM, TGA, DRS, TEM, AA, and BET. The obtained bio-based nanomaterial was successfully investigated, as a highly efficient and green heterogeneous catalyst, in the Heck cross-coupling reaction (HCR) for the synthesis of various valuable biologically active cinnamic acid ester derivatives from the corresponding aryl halides using several acrylates. Indeed, aryl halides containing I or Br survived very well under optimized conditions to afford the corresponding products compared to the substrates with Cl. The prepared Pd@MET-EDTA-CS nanocatalyst promoted the HCR in high to excellent yields and short reaction times with minimum Pd loading (0.0027 mol%) on its structure as well as without any leaching occurring during the process. The recovery of the catalyst was performed by simple filtration and the catalytic activity remained approximately constant after five runs for the model reaction.

Trimesic acid-functionalized chitosan: A novel and efficient multifunctional organocatalyst for green synthesis of polyhydroquinolines and acridinediones under mild conditions

Trimesic acid-functionalized chitosan (Cs/ECH-TMA) material was prepared through a simple procedure by using inexpensive and commercially available chitosan (Cs), epichlorohydrin (ECH) linker and trimesic acid (TMA). The obtained bio-based Cs/ECH-TMA material was characterized using energy-dispersive X-ray (EDX) and Fourier-transform infrared (FTIR) spectroscopy, field emission scanning electron microscopy (FESEM) and X-ray diffraction (XRD) analysis. The Cs/ECH-TMA material was successfully used, as a multifunctional heterogeneous and sustainable catalyst, for efficient and expeditious synthesis of medicinally important polyhydroquinoline (PHQ) and polyhydroacridinedione (PHA) scaffolds through the Hantzsch condensation in a one-pot reaction. Indeed, the heterogeneous Cs/ECH-TMA material can be considered as a synergistic multifunctional organocatalyst due to the presence of a large number of acidic active sites in its structure as well as hydrophilicity. Both PHQs and PHAs were synthesized in the presence of biodegradable heterogeneous Cs/ECH-TMA catalytic system from their corresponding substrates in EtOH under reflux conditions and high to quantitative yields. The Cs/ECH-TMA catalyst is recyclable and can be reused at least four times without significant loss of its catalytic activity.

Exploring the synthetic potential of a g-C3N4·SO3H ionic liquid catalyst for one-pot synthesis of 1,1-dihomoarylmethane scaffolds via Knoevenagel-Michael reaction

A highly promising approach for the synthesis of functionalized 1,1-dihomoarylmethane scaffolds (bis-dimedones, bis-cyclohexanediones, bis-pyrazoles, and bis-coumarins) using g-C₃N₄·SO₃H ionic liquid via Knoevenagel-Michael reaction has been developed and the synthesized derivatives were well characterized using spectral studies. The method involved the reaction of C-H activated acids with a range of aromatic aldehydes, in a 2 : 1 ratio catalyzed by a g-C₃N₄·SO₃H ionic liquid catalyst. The use of g-C₃N₄·SO₃H as a catalyst has several benefits, such as low cost, easy preparation, and high stability. It was synthesized from urea powder and chloro-sulfonic acid and was thoroughly characterized using FT-IR, XRD, SEM, and HRTEM. The present work unveils a promising and environmentally friendly method for synthesizing 1,1-dihomoarylmethane scaffolds with high yield, selectivity, and efficiency, using mild reaction conditions, no need for chromatographic separation, and short reaction times. The approach adheres to green chemistry principles and offers a viable alternative to the previously reported methods.

Meglumine-Promoted Eco-Compatible Pseudo-Three-Component Reaction for the Synthesis of 1,1-Dihomoarylmethane Scaffolds and Their Green Credentials

A simple, straightforward, and energy-efficient greener route for the synthesis of a series of biologically interesting functionalized 1,1-dihomoarylmethane scaffolds has been developed in the presence of meglumine as an efficient and eco-friendly organo-catalyst via one-pot pseudo-three-component reaction at room temperature. Following this protocol, it is possible to synthesize 1,1-dihomoarylmethane scaffolds of an assortment of C-H activated acids such as dimedone, 1,3-cyclohexadione, 4-hydroxy-6-methyl-2-pyrone, 4-hydroxycoumarin, and 1-phenyl-3-methyl-pyrazolone. The salient features of the present green protocol are mild reaction conditions, good to excellent yields, operational simplicity, easy isolation of products, no cumbersome post treatment, high atom economy, and low E-factor. In addition, this chemistry portrays several green advantages including the reusability of reaction media and product scalability, which makes protocol sustainably efficient. Additionally, several control experiments such as protection of catalyst reactive site, D₂O exchange, and ¹H NMR studies revealed possible pathways for meglumine-promoted reactions. Inspired by the natural physiological environment of 1,1-dihomoarylmethane scaffolds, we reconnoitered the biological profile of our compounds and synthesized compounds that were promising for their antiproliferative and antibacterial activities.

Synthesis of (E)-2-(1H-tetrazole-5-yl)-3-phenylacrylenenitrile derivatives catalyzed by new ZnO nanoparticles embedded in a thermally stable magnetic periodic mesoporous organosilica under green conditions

ZnO nanoparticles embedded in a magnetic isocyanurate-based periodic mesoporous organosilica (Fe₃O₄@PMO–ICS–ZnO) were prepared through a modified environmentally-benign procedure for the first time and properly characterized by appropriate spectroscopic and analytical methods or techniques used for mesoporous materials. The new thermally stable Fe₃O₄@PMO–ICS–ZnO nanomaterial with proper active sites and surface area as well as uniform particle size was investigated for the synthesis of medicinally important tetrazole derivatives through cascade condensation and concerted 1,3-cycloaddition reactions as a representative of the Click Chemistry concept. The desired 5-substituted-1H-tetrazole derivatives were smoothly prepared in high to quantitative yields and good purity in EtOH under reflux conditions. Low catalyst loading, short reaction time and the use of green solvents such as EtOH and water instead of carcinogenic DMF as well as easy separation and recyclability of the catalyst for at least five consecutive runs without significant loss of its activity are notable advantages of this new protocol compared to other recent introduced procedures.

Sulfamic acid pyromellitic diamide-functionalized MCM-41 as a multifunctional hybrid catalyst for melting-assisted solvent-free synthesis of bioactive 3,4-dihydropyrimidin-2-(1H)-ones

This study introduces a practical approach to fabricate a novel hybrid acidic catalyst, namely sulfamic acid pyromellitic diamide-functionalized MCM-41 (MCM-41-APS-PMDA-NHSO₃H). Various techniques such as FTIR, TGA, XRD, BET, FESEM, and EDX were used to confirm its structural characteristics. The efficiency of the new MCM-41-APS-PMDA-NHSO₃H organosilica nanomaterials, as a heterogenous nanocatalyst, was examined in the synthesis of biologically active 3,4-dihydropyrimidin-2-(1H)-one derivatives under solvent-free conditions. It was found that the nanoporous MCM-41-APS-PMDA-NHSO₃H, demonstrating acidic nature and high surface area, can activate all the Biginelli reaction components to afford desired 3,4-dihydropyrimidin-2-(1H)-ones under solvent-free conditions in short reaction time. Furthermore, easy and quick isolation of the new introduced hybrid organosilica from the reaction mixture as well as its reusability with negligible loss of activity in at least five consecutive runs are another advantages of this green protocol.

Application of cyclohexane-1,3-diones for six-membered oxygen-containing heterocycles synthesis

Cyclohexan-1,3-dione derivatives are versatile scaffolds for the synthesis of a variety of value-added organic molecules including heterocycles and natural products. Six-membered oxygen heterocycles prepared from cyclohexan-1,3-diones are of much importance as they are intermediate for the synthesis of a number of natural products and several other valuable bioactive molecules which shows anti-viral, anti-bacterial, analgesic, antimalarial, anti-inflammatory, anti-allergic, anti-tumor and anti-cancer activities. These advantages have inspired us to write a detailed survey on the newly developed methods which are very essential in the construction of six-membered oxygen heterocycles. Further, the versatility in the chemistry of cyclohexan-1,3-dione and its derivatives is due to the presence of highly active methylene moiety and its active di-carbonyl groups. Recently, reactions of cyclohexane-1,3-dione and its derivatives with other substrates for instance aldehydes, malononitriles, NMSM, chalcones, isatin etc. have been established for the construction of a variety of six-membered oxygen heterocycles. The studies reported in this review article involved the synthesis of six-membered oxygen-containing heterocycles which includes 4H-chromen-5(6H)-one, 2H-xanthen-1(9H)-one, 2H-xanthen-1,8(5H,9H)-dione, 6H-chromen-2,5-dione derivatives and natural products having six-membered oxygen heterocycles from cyclohexane-1,3-dione and its derivatives as one of the substrate.

DABA MNPs: a new and efficient magnetic bifunctional nanocatalyst for the green synthesis of biologically active pyrano[2,3-c]pyrazole and benzylpyrazolyl coumarin derivatives

A new core–shell magnetic silica functionalized with 3,4-diaminobenzoic acid nanocatalyst (Fe₃O₄@SiO₂@PTS-DABA) was prepared and characterized. The Fe₃O₄@SiO₂@PTS-DABA catalyst was applied for the synthesis of dihydropyranopyrazole and benzylpyrazolyl coumarin derivatives.

New Hydrogen-Bond-Enriched 1,3,5-Tris(2-hydroxyethyl) Isocyanurate Covalently Functionalized MCM-41: An Efficient and Recoverable Hybrid Catalyst for Convenient Synthesis of Acridinedione Derivatives

A new nano-ordered 1,3,5-tris(2-hydroxyethyl) isocyanurate-1,3-propylene covalently functionalized MCM-41 (MCM-41-Pr-THEIC) was designed and prepared at room temperature through a simple procedure. According to various microscopic, spectroscopic, or thermal methods and techniques, the correlation of the catalytic performance of the hybrid mesoporous MCM-41-Pr-THEIC to its structural characteristics was fully confirmed. The new MCM-41-Pr-THEIC organosilica nanomaterials were successfully investigated as a solid mild nanocatalyst through hydrogen-bonding activation provided by its organic moiety, for the pseudo-four-component condensation of dimedone, aldehydes, and ammonium acetate or p-toluidine to afford the corresponding acridinedione derivatives under green conditions. Furthermore, the introduced nanocatalyst could be reused at least four times with negligible loss of its activity, indicating the good stability and high activity of the new hybrid organosilica.