An Effective Resistive-Type Alcohol Vapor Sensor Using One-Step Facile Nanoporous Anodic Alumina

With the increases in work environment regulations restricting alcohol to 1000 ppm, and in drink-driving laws, testing for alcohol with a simple method is a crucial issue. Conventional alcohol sensors based on sulfide, metal oxide, boron nitride or graphene oxide have a detection limit in the range of 50-1000 ppm but have disadvantages of complicated manufacture and longer processing times. A recent portable alcohol meter based on semiconductor material using conductivity or chemistry measurements still has the problem of a complex and lengthy manufacturing process. In this paper, a simple and effective resistive-type alcohol vapor sensor using one-step anodic aluminum oxide (AAO) is proposed. The nanoporous AAO was produced in one-step by anodizing low-purity AA1050 at room temperature of 25 °C, which overcame the traditional high-cost and lengthy process at low temperature of anodization and etching from high-purity aluminum. The highly specific surface area of AAO has benefits for good sensing performance, especially as a humidity or alcohol vapor sensor. With the resistance measurement method, alcohol vapor concentration of 0, 100, 300, 500, 700 and 1000 ppm correspond to mean resistances of 8524 Ω, 8672 Ω, 9121 Ω, 9568 Ω, 10,243 Ω, and 11,045 Ω, respectively, in a linear relationship. Compared with other materials for detecting alcohol vapor, the AAO resistive sensor has advantages of fast and simple manufacturing with good detection limits for practical applications. The resistive-type alcohol vapor-sensing mechanism is described with respect to the resistivity of the test substance and the pore morphology of AAO. In a human breath test, the AAO sensor can quickly distinguish whether the subject is drinking, with normal breath response of -30% to -40% and -20% to -30% response after drinking 50 mL of wine of 25% alcohol.

Recent Advances in Sensing Materials Targeting Clinical Volatile Organic Compound (VOC) Biomarkers: A Review

In general, volatile organic compounds (VOCs) have a high vapor pressure at room temperature (RT). It has been reported that all humans generate unique VOC profiles in their exhaled breath which can be utilized as biomarkers to diagnose disease conditions. The VOCs available in exhaled human breath are the products of metabolic activity in the body and, therefore, any changes in its control level can be utilized to diagnose specific diseases. More than 1000 VOCs have been identified in exhaled human breath along with the respiratory droplets which provide rich information on overall health conditions. This provides great potential as a biomarker for a disease that can be sampled non-invasively from exhaled breath with breath biopsy. However, it is still a great challenge to develop a quick responsive, highly selective, and sensitive VOC-sensing system. The VOC sensors are usually coated with various sensing materials to achieve target-specific detection and real-time monitoring of the VOC molecules in the exhaled breath. These VOC-sensing materials have been the subject of huge interest and extensive research has been done in developing various sensing tools based on electrochemical, chemoresistive, and optical methods. The target-sensitive material with excellent sensing performance and capturing of the VOC molecules can be achieved by optimizing the materials, methods, and its thickness. This review paper extensively provides a detailed literature survey on various non-biological VOC-sensing materials including metal oxides, polymers, composites, and other novel materials. Furthermore, this review provides the associated limitations of each material and a summary table comparing the performance of various sensing materials to give a better insight to the readers.

State of the Art in Alcohol Sensing with 2D Materials

Since the discovery of graphene, the star among new materials, there has been a surge of attention focused on the monatomic and monomolecular sheets which can be obtained by exfoliation of layered compounds. Such materials are known as two-dimensional (2D) materials and offer enormous versatility and potential. The ultimate single atom, or molecule, thickness of the 2D materials sheets provides the highest surface to weight ratio of all the nanomaterials, which opens the door to the design of more sensitive and reliable chemical sensors. The variety of properties and the possibility of tuning the chemical and surface properties of the 2D materials increase their potential as selective sensors, targeting chemical species that were previously difficult to detect. The planar structure and the mechanical flexibility of the sheets allow new sensor designs and put 2D materials at the forefront of all the candidates for wearable applications. When developing sensors for alcohol, the response time is an essential factor for many industrial and forensic applications, particularly when it comes to hand-held devices. Here, we review recent developments in the applications of 2D materials in sensing alcohols along with a study on parameters that affect the sensing capabilities. The review also discusses the strategies used to develop the sensor along with their mechanisms of sensing and provides a critique of the current limitations of 2D materials-based alcohol sensors and an outlook for the future research required to overcome the challenges.

Plasmonic Ag nanoparticles arbitrated enhanced photodetection in p-NiO/n-rGO heterojunction for future self-powered UV photodetectors

We report on the low cost and low temperature chemical synthesis of p-type nickel oxide (NiO) and n-type reduced graphene oxide (rGO) and their integration onto ITO/glass substrate to form p-NiO/n-rGO heterojunction for possible self-powered ultraviolet (UV) photodetector applications. Different spectroscopies and microscopes were employed to study their microstructural and surface properties. Whereas, the electrical characterizations have been performed on the devices to ascertain the responsivity, detectivity, external quantum efficiency and temporal responses under dark and UV illumination. It is noteworthy that rGO has not only been used as an n-type semiconductor, but also acted as an electron transport layer, which satisfactorily separates out the electrons from the generated carrier pairs, leading to enhanced photoresponse. Furthermore, efforts were also consecrated to synthesize Ag nanoparticles (NPs) of ∼5 nm radius. The integration of Ag NPs on the conventional NiO/rGO heterojunction facilitates an improved UV light absorption property. It was understood that the performance improvement was owed to the local surface plasmon resonance of Ag NPs within the active layer of NiO. Surprisingly, both the devices (with and without Ag NPs) exhibit photovoltaic behavior which shows its potential for self-powered device application. When the Ag NPs embedded device is concerned, it showed better on/off ratio (6.3 × 10³), high responsivity (72 mAW^-1), large detectivity (3.95 × 10¹² Jones), and high efficiency (24.46%) as compared to the conventional NiO/rGO heterojunction one (without Ag NPs). The variation in the photoresponse and improved charge transport was explained through a band-diagram, which also showcases a comprehensive understanding on the operational principle of the fabricated self-powered devices. Thus, this self-powered photodetector driven by built in electric field is operated independently and can be attached with any other electronic gadgets for internet of things applications.

A naked-eye colorimetric sensor for methanol and ‘turn-on’ fluorescence detection of Al3+

A multifunctional Schiff base compound, NRSB, having a rhodanine scaffold was fabricated by a simple and cost-effective protocol.