Free-Standing, Interwoven Tubular Graphene Mesh-Supported Binary AuPt Nanocatalysts: An Innovative and High-Performance Anode Methanol Oxidation Catalyst

Pt-based alloy or bimetallic anode catalysts have been developed to reduce the carbon monoxide (CO) poisoning effect and the usage of Pt in direct methanol fuel cells (DMFCs), where the second metal plays a role as CO poisoning inhibitor on Pt. Furthermore, better performance in DMFCs can be achieved by improving the catalytic dispersion and using high-performance supporting materials. In this work, we introduced a free-standing, macroscopic, interwoven tubular graphene (TG) mesh as a supporting material because of its high surface area, favorable chemical inertness, and excellent conductivity. Particularly, binary AuPt nanoparticles (NPs) can be easily immobilized on both outer and inner walls of the TG mesh with a highly dispersive distribution by a simple and efficient chemical reduction method. The TG mesh, whose outer and inner walls were decorated with optimized loading of binary AuPt NPs, exhibited a remarkably catalytic performance in DMFCs. Its methanol oxidation reaction (MOR) activity was 10.09 and 2.20 times higher than those of the TG electrodes with only outer wall immobilized with pure Pt NPs and binary AuPt NPs, respectively. Furthermore, the catalyst also displayed a great stability in methanol oxidation after 200 scanning cycles, implying the excellent tolerance toward the CO poisoning effect.

A comprehensive and critical review of the recent progress in electrocatalysts for the ethanol oxidation reaction

The human craving for energy is continually mounting and becoming progressively difficult to gratify. At present, the world's massive energy demands are chiefly encountered by nonrenewable and benign fossil fuels. However, the development of dynamic energy cradles for a gradually thriving world to lessen fossil fuel reserve depletion and environmental concerns is currently a persistent issue for society. The discovery of copious nonconventional resources to fill the gap between energy requirements and supply is the extreme obligation of the modern era. A new emergent, clean, and robust alternative to fossil fuels is the fuel cell. Among the different types of fuel cells, the direct ethanol fuel cell (DEFCs) is an outstanding option for light-duty vehicles and portable devices. A critical tactic for obtaining sustainable energy sources is the production of highly proficient, economical and green catalysts for energy storage and conversion devices. To date, a broad range of research is available for using Pt and modified Pt-based electrocatalysts to augment the C2H5OH oxidation process. Pt-based nanocubes, nanorods, nanoflowers, and the hybrids of Pt with metal oxides such as Fe2O3, TiO2, SnO2, MnO, Cu2O, and ZnO, and with conducting polymers are extensively utilized in both acidic and basic media. Moreover, Pd-based materials, transition metal-based materials, as well as transition metal-based materials are also points of interest for researchers nowadays. This review article delivers a broad vision of the current progress of the EOR process concerning noble metals and transition metals-based materials.

Rapid preparation of ultra-fine and well-dispersed SnO2 nanoparticles via a double hydrolysis reaction for lithium storage

An efficient and rapid method is reported for preparing ultra-fine and well-dispersed SnO₂ nanoparticles in a large scale. A simple double hydrolysis reaction between SnO₃^2- and Fe³⁺ ions was masterly used to form a stable colloid system, in which colloidal particles of H₂SnO₃ with negative charges and Fe(OH)₃ with positive charges electrostatically interact with each other and form honeycomb-like "core-shell" units. Through the hydrothermal reaction, the units are easily transformed into SnO₂@FeO(OH) structures. Ultra-fine and well-dispersed SnO₂ particles with less than 6 nm diameter were finally obtained with a high yield by further etching using hydrochloric acid. When used as anode materials for lithium ion batteries, the ultra-fine SnO₂ particles can be easily dispersed into the carbon networks originating from the carbon source of glucose during the hydrothermal reaction. Electrochemical tests confirmed that these ultra-fine SnO₂/C materials were endowed with excellent cyclic stability and C-rate performance. Even at a 1.56 A g^-1 (2C) high current density, the reversible capacity could be maintained at 710 mA h g^-1 after 100 cycles owing to the ultra-fine particle size of SnO₂ and the rich carbon networks.

Green preparation of core-shell Cu@Pd nanoparticles with chitosan for glucose detection

Although core-shell structure is favored by many applications, preparing it with green way is rarely been reported. Herein, a core-shell structured Cu@Pd-CS nanocomposite is greenly fabricated utilizing a natural chitosan and applied to glucose detection. As-obtained Cu@Pd-CS nanoparticles were characterized by transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and powder X-ray diffraction (XRD). When applied to glucose detection, the Cu@Pd-CS exhibits good stability, sensitivity and anti-interference. Moreover, it has a good linear relationship in glucose concentrations range of 0.1-1 mM with the sensitivity of 1.53 μA mM^-1 cm^-2 and 1-10 mM with the sensitivity of 23.00 μA mM^-1 cm^-2. This work proves the practicability of building metal-based core-shell structure nanoparticles with green resources and glucose detection application.

Nanocatalysts for Electrocatalytic Oxidation of Ethanol

The use of ethanol as a fuel in direct alcohol fuel cells depends not only on its ease of production from renewable sources, but also on overcoming the challenges of storage and transportation. In an ethanol-based fuel cell, highly active electrocatalysts are required to break the C-C bond in ethanol for its complete oxidation at lower overpotentials, with the aim of increasing the cell performance, ethanol conversion rates, and fuel efficiency. In recent decades, the development of wet-chemistry methods has stimulated research into catalyst design, reactivity tailoring, and mechanistic investigations, and thus, created great opportunities to achieve efficient oxidation of ethanol. In this Minireview, the nanomaterials tested as electrocatalysts for the ethanol oxidation reaction in acid or alkaline environments are summarized. The focus is mainly on nanomaterials synthesized by using wet-chemistry methods, with particular attention on the relationship between the chemical and physical characteristics of the catalysts, for example, catalyst composition, morphology, structure, degree of alloying, presence of oxides or supports, and their activity for ethanol electro-oxidation. As potential alternatives to noble metals, non-noble-metal catalysts for ethanol oxidation are also briefly reviewed. Insights into further enhancing the catalytic performance through the design of efficient electrocatalysts are also provided.