Sulfur ion-exchange strategy to obtain Bi2S3 nanostructures from Bi2O3 for better water splitting performance

A two-step simple and efficient ion-exchange chemical strategy is proposed to obtain nanostructured Bi2S3 electrodes of different surface morphologies from the Bi2O3. In the first step, nanoplates of the Bi2O3 are obtained on nickel-foam using successive ionic layer adsorption and reaction method at room-temperature (25 °C). In the second phase, as-obtained nanoplates of the Bi2O3 are transferred to the Bi2S3 using four autoclaves containing different sulfur precursor solutions at 120 °C for 8 h for phase change, structural conversion and surface morphological modification (i.e., walnuts, network-type, nanowires, and nanoflowers). Due to higher surface area and conductivity, lower charge transfer resistance, and reduced band gap caused by ionic and phase conversion, the Bi2S3 surpasses the Bi2O3 in hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) activities. The overpotential of 112-370 mV for the Bi2S3 network is much lower than that of the nanoplates of the Bi2O3 (275-543 mV), and walnuts (134-464 mV), nanowires (125-500 mV), and nanoflowers (194-520 mV) of the Bi2S3. The Bi2S3 network-type Bi2S3 electrode shows considerable chemical stability through cycling measurement, suggesting the importance of the present study in obtaining metal sulfides from metal oxide with better water splitting activities.

Wavelet-artificial neural network to predict the acetone sensing by indium oxide/iron oxide nanocomposites

This study applies a hybridized wavelet transform-artificial neural network (WT-ANN) model to simulate the acetone detecting ability of the Indium oxide/Iron oxide (In2O3/Fe2O3) nanocomposite sensors. The WT-ANN has been constructed to extract the sensor resistance ratio (SRR) in the air with respect to the acetone from the nanocomposite chemistry, operating temperature, and acetone concentration. The performed sensitivity analyses demonstrate that a single hidden layer WT-ANN with nine nodes is the highest accurate model for automating the acetone-detecting ability of the In2O3/Fe2O3 sensors. Furthermore, the genetic algorithm has fine-tuned the shape-related parameters of the B-spline wavelet transfer function. This model accurately predicts the SRR of the 119 nanocomposite sensors with a mean absolute error of 0.7, absolute average relative deviation of 10.12%, root mean squared error of 1.14, and correlation coefficient of 0.95813. The In2O3-based nanocomposite with a 15 mol percent of Fe2O3 is the best sensor for detecting acetone at wide temperatures and concentration ranges. This type of reliable estimator is a step toward fully automating the gas-detecting ability of In2O3/Fe2O3 nanocomposite sensors.

Porous Oxide-Functionalized Seaweed Fabric as a Flexible Breath Sensor for Noninvasive Nephropathy Diagnosis

Ever-increasing quality of life demands low-power and reliable gas-sensing technology for point-of-care monitoring of human health by relevant breath biomarkers. However, precise identification is rather challenging due to the relatively small concentration and an abundance of interferents. Herein, a breath sensor that can detect ppb-level ammonia is constructed based on a soft-hard interface design of biocompatible seaweed fabric and nanosheet-assembled bismuth oxide architectures after undergoing heat treatment. Benefiting from abundant defective sites and surface chemical state changes, the flexible sensor can work at room temperature and exhibits superior characteristics for ammonia detection, including ultrahigh response (1296), short response/recovery time (12/6 s), small detection limit (117 ppb), and remarkable anti-interference, even after repetitive mechanical bending and long-term fatigue. Furthermore, the flexible sensor demonstrates a noticeable response to the exhaled breath of a patient with Helicobacter pylori infection. After connecting the sensor with a green-light-emitting diode (LED) in the circuit, an alarm system successfully warns about ammonia levels based on the brightness of the LED. This work provides a potential strategy for wide-range ammonia detection and opens new applications in predictive and personalized healthcare platforms for noninvasive medical diagnosis.

Hierarchical hollow BiFeO3 microcubes with enhanced acetone gas sensing performance

Metal oxide-based gas sensors have drawn tremendous research interests owing to their various compositions and selective and improved performance. However, the development of a targeted metal oxide with controlled microstructures via a facile preparation procedure is still a challenge. In this work, hierarchical BiFeO3 nano-microstructures are successfully developed through the post-modification of Bi3+ encapsulation with Fe-based Prussian blue microcubes followed by a sequential annealing strategy. The microstructures of the hierarchical BiFeO3 architectures can be effectively modulated by tuning various thermolysis temperatures. Among them, the hierarchical hollow BiFeO3 microcubes assembled from ultrathin nanosheets exhibit optimum acetone selective sensing performances with a gas response value (Ra/Rg) of 5.2 at 240 °C, rapid response/recovery times (10 s/9 s), and excellent long-term stability (for at least 30 days). The high and reproducible acetone-sensing properties are mainly attributed to the unique interior loose and porous structures with good permeability. The corresponding acetone sensing mechanism relying on the microstructure of BiFeO3 was also discussed. This work highlights the key role of morphological evolution in the fabrication of multi-functional multimetal oxides, and thus offers new opportunities for the rational design of novel gas sensing materials.

Room-temperature synthesis and CO2-gas sensitivity of bismuth oxide nanosensors

Room-temperature (27 °C) synthesis and carbon dioxide (CO₂)-gas-sensor applications of bismuth oxide (Bi₂O₃) nanosensors obtained via a direct and superfast chemical-bath-deposition method (CBD) with different surface areas and structures, i.e., crystallinities and morphologies including a woollen globe, nanosheet, rose-type, and spongy square plate on a glass substrate, are reported. Moprhologies of the Bi₂O₃ nanosensors are tuned through polyethylene glycol, ethylene glycol, and ammonium fluoride surfactants. The crystal structure, type of crystallinity, and surface appearance are determined from the X-ray diffraction patterns, X-ray photoelectron spectroscopy spectra, and high-resolution transmission electron microscopy images. The room-temperature gas-sensor applications of these Bi₂O₃ nanosensors for H₂, H₂S, NO₂, SO_2, and CO₂ gases are monitored from 10 to 100 ppm concentrations, wherein Bi₂O₃ nanosensors of different physical properties demonstrate better performance and response/recovery time measurement for CO₂ gas than those for the other target gases employed. Among various sensor morphologies, the nanosheet-type Bi₂O₃ sensor has exhibited at 100 ppm concentration of CO₂ gas, a 179% response, 132 s response time, and 82 s recovery time at room-temperature, which is credited to its unique surface morphology, high surface area, and least charge transfer resistance. This suggests that the importance of the surface morphology, surface area, and crystallinity of the Bi₂O₃ nanosensors used for designing room-temperature operable CO₂ gas sensors for commercial benefits.

Room-temperature (27 °C) synthesis and carbon dioxide (CO₂)-gas-sensing applications of bismuth oxide (Bi₂O₃) nanosensors obtained via a direct and superfast chemical-bath-deposition method (CBD) with different surface areas and structures.

Chemically grown bismuth-oxy-iodide (BiOI/Bi9I2) nanostructure for high performance battery-type supercapacitor electrodes

A dual phase bismuth oxyiodide (BiOI/Bi₉I₂) nanostructure battery type supercapacitor electrode is synthesized using chemical bath deposition (CBD) and the capacitance and energy/power density (ED/PD) reported.

Heterostructural CuO-ZnO Nanocomposites: A Highly Selective Chemical and Electrochemical NO2 Sensor

A simple one-step chemical method is employed for the successful synthesis of CuO(50%)-ZnO(50%) nanocomposites (NCs) and investigation of their gas sensing properties. The X-ray diffraction studies revealed that these CuO-ZnO NCs display a hexagonal wurtzite-type crystal structure. The average width of 50-100 nm and length of 200-600 nm of the NCs were confirmed by transmission electron microscopic images, and the 1:1 proportion of Cu and Zn composition was confirmed by energy-dispersive spectra, i.e., CuO(50%)-ZnO(50%) NC studies. The CuO(50%)-ZnO(50%) NCs exhibit superior gas sensing performance with outstanding selectivity toward NO2 gas at a working temperature of 200 °C. Moreover, these NCs were used for the indirect evaluation of NO2 via electrochemical detection of NO2 - (as NO2 converts into NO2 - once it reacts with moisture, resulting into acid rain, i.e., indirect evaluation of NO2). As compared with other known modified electrodes, CuO(50%)-ZnO(50%) NCs show an apparent oxidation of NO2 - with a larger peak current for a wider linear range of nitrite concentration from 20 to 100 mM. We thus demonstrate that the as-synthesized CuO(50%)-ZnO(50%) NCs act as a promising low-cost NO2 sensor and further confirm their potential toward tunable gas sensors (electrochemical and solid state) (Scheme 1).

Facile Chemical Synthesis and Potential Supercapattery Energy Storage Application of Hydrangea-type Bi2MoO6

Soft chemical synthesis is used to obtain a hydrangea-type bismuth molybdate (Bi2MoO6) supercapattery electrode that demonstrates considerable energy/power density and cycling life. Structure and morphology studies, initially, reveal a phase-pure polycrystalline and hydrangea-type surface appearance for Bi2MoO6, which upon testing in an electrochemical energy storage system displays supercapattery behavior, a combination of a supercapacitor and a battery. From the power law, an applied-potential-dependent charge storage mechanism is established for the Bi2MoO6 electrode material. A Trasatti plot evidences the presence of inner and outer surface charges. The hydrangea-type Bi2MoO6 electrode demonstrates a specific capacitance of 485 F g-1 at 5 A g-1 and a stability of 82% over 5000 cycles. An assembled symmetric supercapattery with a Bi2MoO6//Bi2MoO6 configuration demonstrates energy and power densities of 45.6 W h kg-1 and 989 W kg-1, respectively. A demonstration elucidating the lighting up of three light-emitting diodes, connected in series, by the symmetric supercapattery signifies the practical potentiality of the as-synthesized hydrangea-type Bi2MoO6 electrode in energy storage devices.