Nitrogen Doped Carbon Quantum Dots as Fluorescence "Turn-Off-On" Sensor for Detection of Fe3+ Ions and Ascorbic Acid in Moringa oleifera and Citrus Lemon

In recent year, the uses of carbon quantum dots (CQDs) have increased in many fields. Herein we report, synthesis of fluorescent nitrogen doped carbon quantum dots (N-CQDs) by simple and ecofriendly hydrothermal method. The as-synthesized N-CQDs were characterized by various techniques and the quantum yield was also calculated. Then, application of N-CQDs were performed as a sensor for detection of ferric ions (Fe3+) based on static quenching mechanism (turn-off) which occurred due to formation of non-fluorescent complex between N-CQDs and Fe3+ ions. Interestingly, fluorescence intensity of quenched N-CQDs has been significantly recovered (turn-on) by addition of ascorbic acid (AA). The recovery mechanism is based on the redox reaction between Fe3+ ions and AA. Thus, N-CQDs has been used as fluorescence "turn-off-on" sensor for detection of Fe3+ ions and AA. Further this detection system is used for detecting Fe3+ ions in Moringa oleifera and AA in citrus lemon.

Efficient Adsorptive Removal of Methylene Blue Dye from Aqueous Solution Using Eragrostis Teff Biomass-Derived Nitrogen and Phosphorus-Codoped Carbon Quantum Dots

Carbon quantum dots have a great application potential in environmental protection via adsorption technology due to their large specific surface area and negative zeta potential. In this work, nitrogen and phosphorus-codoped carbon quantum dots (NP-CQDs) with a large specific surface area and negative zeta potential were successfully synthesized by a single-step hydrothermal synthesis. Batch adsorption studies were utilized to assess the adsorbent's capacity to remove common methylene blue (MB) dye contaminants from an aqueous solution. The experiment showed that MB dye could be removed in 30 min under optimum experimental conditions, with a removal efficiency of 93.73%. The adsorbent's large surface area of 526.063 m2/g and negative zeta potential of -12.3 mV contribute to the high removal efficiency. The Freundlich isotherm model fits the adsorption process well at 298 K, with R2 and n values of 0.99678 and 4.564, respectively, indicating its applicability. A kinetic study demonstrated that the pseudo-second-order model, rather than the pseudo-first-order model, is more suited to represent the process of MB dye adsorption onto NP-CQDs. This research established a simple and cost-effective method for developing a highly efficient NP-CQD adsorbent for organic dye degradation by adsorption.

Carbon nanoprobe derived from Nyctanthes arbor-tristis flower: Unveiling the surface defect-derived fluorescence

Dual Emissive (green and blue) Carbon dots (C-Dots) aka g-CD and b-CD were synthesized using flowers of Nyctanthes arbortristis as the sole precursor via hydrothermal method without the aid of any external passivating agent. In the present report, the effect of time and temperature on the hydrothermal reaction was evaluated in order to modulate the surface defects that could lead to dual emissions. To gauge the nature, size, morphology, and optoelectronic characteristics, the C-Dots were characterized using high-resolution transmission electron microscopy (HRTEM), X-ray photoelectron spectroscopy (XPS), Fourier-transform infrared spectroscopy (FTIR), UV-Vis spectroscopy and Fluorescence spectroscopy. The fluorescence studies of both the Carbon Dots revealed their excitation-dependent emission characteristics with the bathochromic shift. Furthermore, both g-CD and b-CD could effectively be utilized as efficient fluorescent probes for the selective and sensitive detection of Fe3+. These fluorescent nanoprobes could selectively detect Fe3+ over a wide range of concentrations (3 µM to 100 µM) with limit of detection (LOD) as low as 0.06 µM and 0.70 µM respectively. These tuneable Carbon Dots having wider solubilities would open a new avenue as Nanosensors for real-time applications.

Upcycling Waste: Citrus limon Peel-Derived Carbon Quantum Dots for Sensitive Detection of Tetracycline in the Nanomolar Range

In this work, a sustainable method was developed for the production of water-soluble carbon quantum dots employing a green approach. The synthetic protocol was employed using the microwave pyrolysis technique, while lemon peel served as a carbon precursor. Fabrication of highly fluorescent lemon-peel-derived CQDs (LP-CQDs) having inherent nitrogen functionality was validated by X-ray photoelectron spectroscopy, FTIR, X-ray diffraction, Raman spectroscopic analysis, and TEM techniques. The average particle size of fabricated LP-CQDs was 4.46 nm. LP-CQDs yielded a remarkable quantum yield of 49.5%, which displayed excellent salinity, photostability, storage time, conditions, and pH stability. LP-CQDs displayed encouraging results for tetracycline (TC) detection using a PL turn-off approach. The sensitivity of LP-CQDs toward TC was seen in a nanomolar range having a detection limit of 50.4 nM. Method validation was comprehensively studied to ensure the precision of the nanosensor. A complete analysis of different photophysical parameters of LP-CQDs was performed with TC to gain a deeper understanding of the sensing mechanism. Fabricated LP-CQDs showed fluorescence quenching toward TC, elucidated by the inner filter effect (IFE) mechanism. The synthesized nanoprobe demonstrated a lesser detection limit with a broad linear range, enabling facile, cheap, environmentally friendly, and fast detection of TC. Practicality of the detection method was assessed through analysis of real samples, resulting in satisfactory recovery percentage and relative standard deviation with respect to the developed probes. Furthermore, LP-CQDs were used as fluorescent inks and to fabricate paper-based fluorescent strips. This study lays the door for the sensing platform of LP-CQDs toward detection of TC, which may impact the potential role of environmental sustainability.

Orange Pomace-Derived Fluorescent Carbon Quantum Dots: Detection of Dual Analytes in the Nanomolar Range

Green-emissive carbon quantum dots (CQDs) with exclusive chemosensing aspects were synthesized from orange pomace as a biomass-based precursor via a facile microwave method without using any chemicals. The synthesis of highly fluorescent CQDs with inherent nitrogen was confirmed through X-ray diffraction, X-ray photoelectron, Fourier transform infrared, Raman, and transmission electron microscopic techniques. The average size of the synthesized CQDs was found to be 7.5 nm. These fabricated CQDs displayed excellent photostability, water solubility, and outstanding fluorescent quantum yield, i.e., 54.26%. The synthesized CQDs showed promising results for the detection of Cr⁶⁺ ions and 4-nitrophenol (4-NP). The sensitivity of CQDs toward Cr⁶⁺ and 4-NP was found up to the nanomolar range with the limit of detection values of 59.6 and 14 nM, respectively. Several analytical performances were thoroughly studied for high precision of dual analytes of the proposed nanosensor. Various photophysical parameters of CQDs (quenching efficiency, binding constant, etc.) were analyzed in the presence of dual analytes to gain more insights into the sensing mechanism. The synthesized CQDs exhibited fluorescence quenching toward incrementing the quencher concentration, which was rationalized by the inner filter effect through time-correlated single-photon counting measurements. The CQDs fabricated in the current work exhibited a lower detection limit and a wide linear range through the simple, eco-friendly, and rapid detection of Cr⁶⁺ and 4-NP ions. To evaluate the feasibility of the detection approach, real sample analysis was conducted, demonstrating satisfactory recovery rates and relative standard deviations toward the developed probes. This research paves the way for developing CQDs with superior characteristics utilizing orange pomace (biowaste precursor).

Nitrogen-doped carbon dots: Recent developments in its fluorescent sensor applications

Doped carbon dots have attracted great attention from researchers across disciplines because of their unique characteristics, such as their low toxicity, physiochemical stability, photostability, and outstanding biocompatibility. Nitrogen is one of the most commonly used elements for doping because of its sizeable atomic radius, strong electronegativity, abundance, and availability of electrons. This distinguishes them from other atoms and allows them to perform distinctive roles in various applications. Here, we have reviewed the most current breakthroughs in nitrogen-doped CDs (N-CDs) for fluorescent sensor applications in the last five years. The first section of the article addresses several synthetic and sustainable ways of making N-CDs. Next, we briefly reviewed the fluorescent features of N-CDs and their sensing mechanism. Furthermore, we have thoroughly reviewed their fluorescent sensor applications as sensors for cations, anions, small molecules, enzymes, antibiotics, pathogens, explosives, and pesticides. Finally, we have discussed the N-CDs' potential future as primary research and how that may be used. We hope that this study will contribute to a better understanding of the principles of N-CDs and the sensory applications that they can serve.

Carbon Quantum Dots' Synthesis with a Strong Chemical Claw for Five Transition Metal Sensing in the Irving-Williams Series

Carbon quantum dots (CQDs) are an excellent eco-friendly fluorescence material, ideal for various ecological testing systems. Herein, we establish uniform microwave synthesis of the group of carbon quantum dots with specific functionalization of ethylenediamine, diethylenetriamine, and three types of Trilon (A, B and C) with chelate claws -C-NH3. CQDs' properties were studied and applied in order to sense metal cations in an aquatic environment. The results provide the determination of the fluorescence quench in dots by pollutant salts, which dissociate into double-charged ions. In particular, the chemical interactions with CQDs' surface in the Irving-Williams series (IWs) via functionalization of the negatively charged surface were ascribed. CQD-En and CQD-Dien demonstrated linear fluorescence quenching in high metal cation concentrations. Further, the formation of claws from Trilon A, Trilon B, and C effectively caught the copper and nickel cations from the solution due to the complexation on CQDs' surface. Moreover, CQD-Trilon C presented chelating properties of the surface and detected five cations (Cu2+, Ni2+, Ca2+, Mg2+, Zn2+) from 0.5 mg/mL to 1 × 10-7 mg/mL in the Irving-William's series. Dependence was mathematically attributed as an equation (ML regression model) based on the constant of complex formation. The reliability of the data was 0.993 for the training database.

N,P-codoped carbon quantum dots-decorated TiO2 nanowires as nanosized heterojunction photocatalyst with improved photocatalytic performance for methyl blue degradation

N,P-doped carbon quantum dots (N,P-CQDs) are deemed as a promising candidate to environmentally friendly materials owing to the inexpensive, biocompatible nature. TiO₂ nanowire is a prospective photocatalyst because of its efficient migration of photoexcited carriers in wastewater treatment. However, the N,P-CQDs-decorated TiO₂ nanowire (N,P-CQDs/NW-TiO₂) photocatalysts have been rarely reported. In this study, we build N,P-CQDs on the surface of TiO₂ nanowires via a simple deposition process. Our investigations demonstrate that N,P-CQDs/NW-TiO₂ has a great photocatalytic degradation for methyl blue (MB) under irradiation. The degradation rate of can reach 93.6% within 120 min under proper conditions. The excellent degradation performance of N,P-CQDs/NW-TiO₂ is ascribed to the mesoporous structure and high separation rate of photoexcited carriers. In addition, the N,P-CQDs/NW-TiO₂ have outstanding recycled photocatalytic capability. After being recycled four times, the N,P-CQDs/NW-TiO₂ still maintain 59.9% photocatalytic activity. The fabricated nanosized photocatalyst can be widely utilized in the field of photocatalysis for wastewater treatment.

A facile green synthesis of functionalized carbon quantum dots as fluorescent probes for a highly selective and sensitive detection of Fe3+ ions

In this study, we have reported an economical, easy, greener and non-toxic synthesis route of water soluble carbon quantum dots (CQDs) through hydrothermal treatment using gelatin as precursor. Under the UV lamp of wavelength 365 nm, the as-prepared CQDs exhibit strong blue fluorescence along with CIE coordinate index of (0.17, 0.14) and possess a quantum yield of 22.7% with rhodamine B as standard. The morphology of as-synthesized CQDs as investigated by TEM measurement confirmed their spherical shape and also revealed that their sizes varied in the scale of 0.5-5 nm. Furthermore, the CQDs showed excitation dependent fluorescence emission behaviour in range of 280 nm to 420 nm as a result of quantum confinement effect. Apart from this, in CQDs solution, the addition of Fe³⁺ ion lead to fluorescence quenching effect. These results revealed that the as-synthesized CQDs have a sensitive response towards the Fe³⁺ ion. The calculated limit of detection (LOD) is 0.2 μM with correlation coefficient R² = 0.996 in the concentration range 0 to 50 μM. More remarkably, the application of CQDs for monitoring the trace level of Fe³⁺ ion in tap water yielded acceptable recoveries (103.33%-105%). Therefore, this work provides a novel additional fluorescent probe for the detection of Fe³⁺ ion in real world.

A Review of Off-On Fluorescent Nanoprobes: Mechanisms, Properties, and Applications

With the development of nanomaterials, fluorescent nanoprobes have attracted enormous attention in the fields of chemical sensing, optical materials, and biological detection. In this paper, the advantages of "off-on" fluorescent nanoprobes in disease detection, such as high sensitivity and short response time, are attentively highlighted. The characteristics, sensing mechanisms, and classifications of disease-related target substances, along with applications of these nanoprobes in cancer diagnosis and therapy are summarized systematically. In addition, the prospects of "off-on" fluorescent nanoprobe in disease detection are predicted. In this review, we presented information from all the papers published in the last 5 years discussing "off-on" fluorescent nanoprobes. This review was written in the hopes of being useful to researchers who are interested in further developing fluorescent nanoprobes. The characteristics of these nanoprobes are explained systematically, and data references and supports for biological analysis, clinical drug improvement, and disease detection have been provided appropriately.

Biocompatible sulfur nitrogen co-doped carbon quantum dots for highly sensitive and selective detection of dopamine

In this work, sulfur and nitrogen co-doped carbon quantum dots (S,N-CQDs) were prepared via one-pot hydrothermal treatment of EDTA disodium and sodium sulfide. The prepared S,N-CQDs were characterized by TEM, XRD, FT-IR, XPS, UV-vis absorption and fluorescence spectra to characterize their morphology, crystal structure, functional groups, elemental composition, and optical properties. It was found that S and N elements were successfully doped into the CQDs and the morphology was approximately spherical with an average particle size of 2.16 nm, in which the excitation/emission wavelengths were 350 and 420 nm, respectively. Compared with single element doped CQDs, double element doped CQDs have a higher quantum yield and excellent optical stability. Cell experiments showed that S,N-CQDs had good biocompatibility because they had no obvious toxicity on both normal cell lines and cancer cell lines. More importantly, based on the synergy of static quenching and dynamic quenching, the S,N-CQDs were used as effective fluorescent probes for sensitive detection of DA, with high anti-interference and low limit of detection. Based on the good biocompatibility of S,N-CQDs, the detection of dopamine in actual serum samples were carried out and the results showed an excellent recovery rate. Therefore, this work provides a dopamine sensor with a practical application prospect.

Facile synthesis of doped CxNy QDs as photoluminescent matrix for direct detection of hydroquinone

In this work, we are reporting facile hydrothermal synthesis of a highly photoluminescent doped carbon nitride quantum dots (C_xN_yQDs) and implied it for direct detection of hydroquinone (H₂Q) by photoluminescence quenching phenomenon. Oxygen and sulphur moieties are regarded as dopant species in C_xN_yQDs and sourced from cheap solid precursors viz. cysteine and maleic acid. Morphological studies of C_xN_yQDs have done by SEM and TEM techniques, while structural analysis has carried out using FTIR, XPS, EDS and UV-Visible spectroscopy. The strong tendency of dispersivity of this QD in water has revealed by its zeta potential value of -32.4 mV. Optical properties of the as-prepared QDs have optimized at different excitation wavelengths. The photoluminescence stability of the dispersion is tested in various pH solutions and under continuous UV irradiation (365 nm). After that, sensing property is observed in quenching of photoluminescence feature of as-prepared QDs by direct addition of various concentrations of H₂Q. We obtained lower detection limit (LOD) of 50 nM (S/N = 3) in linear range from 12 to 57.5 μM. The reduction in photoluminescence of QDs may be attributed to electron transfer from QDs to oxidized H₂Q via -S^- and -COO^- groups present at its surface. Further, as-prepared QDs matrix exhibited high selectivity for hydroquinone over a range of potential interfering agents. Thus, the present work shows cost-effective facile synthesis of highly stable O- and S-doped carbon nitride (C_xN_y) quantum dots as promising photoluminescent sensor for pollutant hydroquinone without help of any enzyme or polymer assisted system.

Ratiometric fluorescent sensors for sequential on-off-on determination of riboflavin, Ag+ and l-cysteine based on NPCl-doped carbon quantum dots

The fluorescent sensor, especially ratiometric fluorescent sensor, is one of the most important applications for CQDs, which is becoming a research hotspot. Herein, carbon quantum dots co-doped with nitrogen, phosphorus and chlorine (NPCl-CQDs) were synthesized by acid-base neutralization reaction exothermic carbonization method. The as-fabricated NPCl-CQDs could emit blue fluorescence and possess excellent fluorescence properties. Based on the FRET, multifunctional and ratiometric fluorescent sensors for "on-off-on" sequential determination of riboflavin, Ag⁺, and Cys with good selectivity and high sensitivity were established. The linear range of riboflavin, Ag⁺, and Cys are 0.50-10.18 μM and 15.89-27.76 μM, 0.66-1.46 mM and 1.50-4.20 mM, and 0.01-0.15 μM and 0.15-0.36 μM with the limit of detection of 3.50 nM, 26.38 μM, and 0.96 nM, respectively. Furthermore, the sensors were successfully used to determine riboflavin, Ag⁺, and Cys in tablets, river water, and human urine with the recoveries of 95.2-104.0%, 95.6-102.0%, and 94.8-106.4%, respectively. More importantly, the as-constructed "on-off-on" NPCl-CQDs-based ratiometric fluorescent sensors were applied for detecting riboflavin, Ag⁺, and Cys in HeLa cells with satisfying results. The finding of this study shows the feasibility and effectiveness of the NPCl-CQDs as the available ratiometric fluorescent sensors for the determination of riboflavin, Ag⁺, and Cys in real samples and living cells.

The fabrication and characterization of a supramolecular Cu-based metallogel thin-film based Schottky diode

The synthesis of a Cu–H₄L metallogel and its application in the fabrication of a Schottky diode are illustrated.

Synthesis of Lanthanide-Functionalized Carbon Quantum Dots for Chemical Sensing and Photocatalytic Application

Tunable photoluminescent-functionalized carbon quantum dots CQDs@Ln (TFA)3 (Ln = Eu, Tb; TFA: trifluoroacetylacetone) were designed and synthesized by introducing lanthanide complexes into the modified CQDs surface through the carboxyl group. The as-prepared CQDs@Ln (TFA)3 emit strong blue–green light with the peak at 435 nm and simultaneously show the characteristic emission of Ln3+ under irradiation of 365 nm light in aqueous solution. Moreover, these functionalized CQDs exhibit excellent photoluminescence properties. In addition, a white luminescent solution CQDs@Eu/Tb (TFA)3 was obtained by adjusting the ratio of Eu3+/Tb3+ and the excitation wavelengths. Moreover, CQDs@Tb (TFA)3 can be utilized as a fluorescent probe for the sensitive and selective detection of MnO4− without interference from other ions in aqueous solution. These results provide the meaningful data for the multicomponent assembly and the photoluminescent-functionalized materials based on the modified CQDs and lanthanide, which can be expected to have potential application in photocatalytic or sensors.

Facile Synthesis of Luffa Sponge Activated Carbon Fiber Based Carbon Quantum Dots with Green Fluorescence and Their Application in Cr(VI) Determination

Carbon quantum dots (CQDs) were prepared by a chemical oxidation method using luffa sponge based activated carbon fiber as the raw material. The obtained CQDs were well characterized. The fluorescence quenching effect of Cr(VI) ion on CQDs was investigated. The results show that the addition of Cr(VI) changes the intensity of the ultraviolet characteristic absorption peak of CQDs, and causes static quenching of the fluorescence of CQDs. With the increase in the Cr(VI) concentration, the fluorescence of CQDs was gradually extinguished linearly.

Surface-passivated, soluble and non-toxic graphene nano-sheets for the selective sensing of toxic Cr(vi) and Hg(ii) metal ions and as a blue fluorescent ink

Non-toxic amine-functionalized soluble graphene nano-sheets (f-GNS) were synthesized by using an old and well-known simple organic procedure. The f-GNS exhibited enhanced optical properties, such as strong blue fluorescence emission with a high value of quantum yield (∼13%). The O,O'-bis-(2-aminopropyl) polypropylene glycol-block-polyethylene glycol-block-polypropylene glycol 800 as block polymeric amine (BPA)-passivized surface of f-GNS exhibited high aqueous solubility and excitation-dependent fluorescence emission behavior with a strong photo-stability performance. These f-GNS were tested for the significant selective sensing of toxic metal ions Cr(vi) and Hg(ii) from various tested toxic metal ions. The sensing experiment was supported by cyclic voltammetry analysis. The dual metal ion sensing method based on fluorescence showed the limit of detection (LOD) of ∼56 nM for Cr(vi) and ∼45 nM for Hg(ii) through a fluorescence quenching process. f-GNS were found to be non-toxic when tested over Escherichia coli (E.coli) cells. Additionally, the strong blue emission properties of f-GNS enabled their use as a suitable blue fluorescent ink under UV light illumination.

Rapid Synthesis of Highly Fluorescent Nitrogen-Doped Graphene Quantum Dots for Effective Detection of Ferric Ions and as Fluorescent Ink

Graphene quantum dots (GQDs) have attracted much attention of many researchers because of their low cytotoxicity, good optical stability, and excellent photoluminescence property, which make them novel nanostructured materials in many application fields ranging from energy to biomedicine and the environment. In this work, highly fluorescent nitrogen-doped graphene quantum dots (N-GQDs) were synthesized through microwave heating using sodium citrate and triethanolamine as raw materials. The as-prepared N-GQDs showed considerable bright blue fluorescence with a quantum yield of 8% and excellent uniform dispersion with an average diameter of approximately 5.6 nm; they also exhibited excellent stability and pH-sensitive properties. Furthermore, we demonstrated the application of N-GQDs as probes for metal ion detection. The results indicated that N-GQDs responded rapidly toward Fe3+ because of the static quenching mechanism. A detection method was proposed, with detection linear in two ranges from 20 to 70 nM (F = -0.9666 C Fe 3+ (nM) + 608.85 (R = 0.9740)) and from 1 to 100 μM (F = -12.04 C Fe 3+ (μM) + 1191.94 (R = 0.9541)); the lowest detection limit of 9.7 nM for Fe3+ was obtained. The results obtained in this work lay the foundation for the development of high-performance and robust metal ion detection sensors. Moreover, it can also possibly be used as a new type of fluorescent ink.

Influence of Group Modification at the Edges of Carbon Quantum Dots on Fluorescent Emission

We present a detailed investigation on the effect of functional group modulation at the edges of carbon quantum dots (CQDs) on the fluorescence from the CQDs. The CQDs attached by N, S, and P elements are synthesized via pyrolysis of a mixture of citric acid and NH3H2O, H2SO4, and H3PO4, respectively. Thus, part of -COOH at the edges of CQDs can be converted into -C=O and functional groups such as -NH2, -SO2, -HSO3, and -H2PO4 can connect to the carbon bonds. We find that the formation of the N/S/P-CQDs can reduce the amount of -COOH that attaches to the edges of sp2-conjugated π-domains located at centers of these CQDs. This effect can result in the reduction of the non-radiative recombination for electronic transition in these CQDs. As a result, the quantum yield (QY) for fluorescence from the CQDs can be efficiently enhanced. We demonstrate experimentally that the QYs for N/S/P-CQDs can reach up to 18.7%, 29.7%, and 10.3%, respectively, in comparison to 9% for these without functional group modulation. This work can provide a practical experimental approach in improving the optical properties of fluorescent CQDs.

P,N Codoped carbon dots as an efficient "off-on" fluorescent probe for lipoic acid detection and its cellular dual-color imaging

A facile single hydrothermal method was developed to synthetize P,N codoped carbon dots (P,N/CDs), which show strong and stable fluorescence, good water solubility, low toxicity and good biocompatibility. Hence, a novel and efficient "off-on" P,N/CDs fluorescent probe was developed for the highly sensitive detection of lipoic acid (LA) for the first time. The fluorescence of the P,N/CDs was quenched by Cu²⁺ forming a P,N/CDs-Cu²⁺ complex, which acted as the "off" process, but Cu²⁺ could be removed by LA, due to stronger chelating between LA and Cu²⁺, forming a more stable complex, which recovered the fluorescence of the P,N/CDs, in order to achieve the "on" process. Under optimal conditions, the concentration of LA and the increased fluorescence intensity of the P,N/CDs-Cu²⁺ complex displayed a good linear relationship within the range of 0.05-28 μM, with a detection limit (S/N = 3) of 0.02 μM. The established "off-on" fluorescent probe was successfully applied to the analysis of LA in urine samples. The average recoveries were in the range of 98.3-101.5%, with a relative standard deviations of less than 3.1%. In addition, the P,N/CDs were also successfully applied to cellular dual-color imaging of live T24 cells. The results show that the P,N/CDs have great application potential in clinical diagnosis, bioassay and bioimaging. Graphical abstract.

Recent Advancements in Doped/Co-Doped Carbon Quantum Dots for Multi-Potential Applications

Carbon quantum dots (CQDs)/carbon nanodots are a new class of fluorescent carbon nanomaterials having an approximate size in the range of 2–10 nm. The majority of the reported review articles have discussed about the development of the CQDs (via simple and cost-effective synthesis methods) for use in bio-imaging and chemical-/biological-sensing applications. However, there is a severe lack of consolidated studies on the recently developed CQDs (especially doped/co-doped) that are utilized in different areas of application. Hence, in this review, we have extensively discussed about the recent development in doped and co-doped CQDs (using elements/heteroatoms—e.g., boron (B), fluorine (F), nitrogen (N), sulphur (S), and phosphorous (P)), along with their synthesis method, reaction conditions, and/or quantum yield (QY), and their emerging multi-potential applications including electrical/electronics (such as light emitting diode (LED) and solar cells), fluorescent ink for anti-counterfeiting, optical sensors (for detection of metal ions, drugs, and pesticides/fungicides), gene delivery, and temperature probing.

A double fluorescent nanoprobe based on phosphorus/nitrogen co-doped carbon dots for detecting dichromate ions and dopamine

An “on–off–on” fluorescent phosphorus/nitrogen co-doped carbon dot (PNCD) probe was explored for the determination of Cr(vi) and dopamine resulting from the inner filter effect (IFE). The blue-emitting carbon dots with high quantum yields of 25.47% as well as a narrow size distribution were synthesized by a rapid, convenient route using H₃PO₄ and ethylenediamine as the precursors without any surface passivation. A wide linear region in the range of 7–70 μM with a detection limit of 0.71 μM was achieved for Cr(vi). Moreover, the proper reductants can weaken the inner filter effect to recover the PNCD fluorescence by converting Cr(vi) into Cr(iii). Therefore, the PNCDs/Cr(vi) hybrid could also be used as an “off–on” fluorescent probe for detecting dopamine (DA) with a detection limit of 0.49 μM. Consequently, the PNCDs could serve as a powerful fluorescent bi-sensor for detection of both Cr(vi) and DA in practical applications.

An “on–off–on” fluorescent phosphorus/nitrogen co-doped carbon dot (PNCD) probe was explored for the determination of Cr(vi) and dopamine resulting from the inner filter effect (IFE).