Fundamentals of chirality, resolution, and enantiopure molecule synthesis methods

The chirality of molecules is a concept that explains the interactions in nature. We may observe the same formula but different organizations revolving around the chiral center. Since Pasteur's meticulous observation of sodium ammonium tartrate crystals' structure, scientists have discovered many features of chiral molecules. The number of newly approved single enantiomeric drugs increases every year and takes place in the market. Thus, separation or resolution methods of racemic mixtures are of continued importance in the efficacy of drugs, installation of affordable production processes, and convenient synthetic chemistry practice. This article presents the asymmetric synthesis approaches and the classification of direct resolution methods of chiral molecules.

An Evaluation of Immobilized Poly-(S)-N-(1-phenylethyl)acrylamide Chiral Stationary Phases

In this study, brush type and polymer type stationary phases were prepared based on (S)-N-(1-phenylethyl) acrylamide, and the polymeric stationary phase demonstrated superior chiral recognition ability. The two polymeric stationary phases were synthesized by two strategies, one was the “grafting from” method, which obtained polymer CSP by initiating monomer polymerization on the surface of 3-methacrylatepropyl silica gel, and the other was “grafting to”, which fixed the copolymer of (S)-N-(1-phenylethyl) acrylamide and trimethoxysilylpropyl methacrylate on silica gel. A comparison of these two bonding modes revealed that the stationary phase produced by “grafting to” had higher chiral recognition ability. Further improvement can be achieved by the end-capping of silanol groups with trimethylchlorosilane to reduce non-enantioselective retention caused by residual silanol groups and improve the peak shape of enantiomers. Chiral separation in subcritical fluid chromatography was also studied. Similar enantioselectivity results with higher resolution were observed due to the improvement of peak shape.

Analysis of drug interactions with serum proteins and related binding agents by affinity capillary electrophoresis: A review

Biomolecules such as serum proteins can interact with drugs in the body and influence their pharmaceutical effects. Specific and precise methods that analyze these interactions are critical for drug development or monitoring and for diagnostic purposes. Affinity capillary electrophoresis (ACE) is one technique that can be used to examine the binding between drugs and serum proteins, or other agents found in serum or blood. This article will review the basic principles of ACE, along with related affinity-based capillary electrophoresis (CE) methods, and examine recent developments that have occurred in this field as related to the characterization of drug-protein interactions. An overview will be given of the various formats that can be used in ACE and CE for such work, including the relative advantages or weaknesses of each approach. Various applications of ACE and affinity-based CE methods for the analysis of drug interactions with serum proteins and other binding agents will also be presented. Applications of ACE and related techniques that will be discussed include drug interaction studies with serum agents, chiral drug separations employing serum proteins, and the use of CE in hybrid methods to characterize drug binding with serum proteins.

Progress in Chiral Stationary Phases Based on Proteins and Glycoproteins

A lot of chiral stationary phases (CSPs) have been introduced for the purpose of analytical and preparative separations of enantiomers. CSPs based on proteins and glycoproteins have unique properties among those CSPs. This review article deals with the preparation of CSPs based on proteins and glycoproteins, their chiral recognition properties and mechanisms, focusing on the CSPs investigated in our group. The dealt proteins and glycoproteins are including bovine serum albumin, human serum albumin, lysozyme, pepsin, human α₁-acid glycoprotein (AGP), chicken ovomucoid and chicken ovoglycoprotein (named chicken AGP).

Rational Design of Pore Parameters in Monodisperse Porous Poly(glycidyl methacrylate-co-ethylene glycol dimethacrylate) Particles Based on Response Surface Methodology

Monodisperse porous poly(glycidyl methacrylate-co–ethylene glycol dimethacrylate) particles are widely applied in different fields, as their pore properties can be influenced and functionalization of the epoxy group is versatile. However, the adjustment of parameters which control morphology and pore properties such as pore volume, pore size and specific surface area is scarcely available. In this work, the effects of the process factors monomer:porogen ratio, GMA:EDMA ratio and composition of the porogen mixture on the response variables pore volume, pore size and specific surface area are investigated using a face centered central composite design. Non-linear effects of the process factors and second order interaction effects between them were identified. Despite the complex interplay of the process factors, targeted control of the pore properties was possible. For each response a response surface model was derived with high predictive power (all R2predicted > 0.85). All models were tested by four external validation experiments and their validity and predictive power was demonstrated.

Affinity monolith chromatography: A review of general principles and recent developments

Affinity monolith chromatography (AMC) is a liquid chromatographic technique that utilizes a monolithic support with a biological ligand or related binding agent to isolate, enrich, or detect a target analyte in a complex matrix. The target-specific interaction exhibited by the binding agents makes AMC attractive for the separation or detection of a wide range of compounds. This article will review the basic principles of AMC and recent developments in this field. The supports used in AMC will be discussed, including organic, inorganic, hybrid, carbohydrate, and cryogel monoliths. Schemes for attaching binding agents to these monoliths will be examined as well, such as covalent immobilization, biospecific adsorption, entrapment, molecular imprinting, and coordination methods. An overview will then be given of binding agents that have recently been used in AMC, along with their applications. These applications will include bioaffinity chromatography, immunoaffinity chromatography, immobilized metal-ion affinity chromatography, and dye-ligand or biomimetic affinity chromatography. The use of AMC in chiral separations and biointeraction studies will also be discussed.

Enantioresolution and Binding Affinity Studies on Human Serum Albumin: Recent Applications and Trends

The interaction between proteins and drugs or other bioactive compounds has been widely explored over the past years. Several methods for analysis of this phenomenon have been developed and improved. Nowadays, increasing attention is paid to innovative methods, such as high performance affinity liquid chromatography (HPALC) and affinity capillary electrophoresis (ACE), taking into account various advantages. Moreover, the development of separation methods for the analysis and resolution of chiral drugs has been an area of ongoing interest in analytical and medicinal chemistry research. In addition to bioaffinity binding studies, both HPALC and ACE al-low one to perform other type of analyses, namely, displacement studies and enantioseparation of racemic or enantiomeric mixtures. Actually, proteins used as chiral selectors in chromatographic and electrophoretic methods have unique enantioselective properties demonstrating suitability for the enantioseparation of a large variety of chiral drugs or other bioactive compounds. This review is mainly focused in chromatographic and electrophoretic methods using human serum albumin (HSA), the most abundant plasma protein, as chiral selector for binding affinity analysis and enantioresolution of drugs. For both analytical purposes, updated examples are presented to highlight recent applications and current trends.

Chiral Monolithic Silica-Based HPLC Columns for Enantiomeric Separation and Determination: Functionalization of Chiral Selector and Recognition of Selector-Selectand Interaction

This review draws attention to the use of chiral monolithic silica HPLC columns for the enantiomeric separation and determination of chiral compounds. Properties and advantages of monolithic silica HPLC columns are also highlighted in comparison to conventional particle-packed, fused-core, and sub-2-µm HPLC columns. Nano-LC capillary monolithic silica columns as well as polymeric-based and hybrid-based monolithic columns are also demonstrated to show good enantioresolution abilities. Methods for introducing the chiral selector into the monolithic silica column in the form of mobile phase additive, by encapsulation and surface coating, or by covalent functionalization are described. The application of molecular modeling methods to elucidate the selector–selectand interaction is discussed. An application for enantiomeric impurity determination is also considered.

Preparation and evaluation of chiral open-tubular columns supported with zeolite silica nanoparticles and single/dual chiral selectors using capillary electrochromatography with amperometric detection

In this work, novel stationary phase coatings by zeolite SiO₂NPs coupled with β-cyclodextrin (β-CD) or β-CD/L-phenylalanine were developed for chiral open-tubular capillary electrochromatography (OT-CEC). The OT columns were prepared taking advantage of the strong adhesion of polydopamine in one-step method. Scanning electron micrography and electroosmotic flow were used to characterize the prepared single/dual-selector OT columns. Chiral separation of four chiral analytes (catechin/epicatechin, ephedrine/pseudoephedrine, ritodrine and salbutamol) was carried out in order to evaluate the performance of the prepared columns in OT-CEC with amperometric detection system. In terms of migration time, peak area, resolution, and selectivity factor of catechin/epicatechin and salbutamol, the run-to-run, day-to-day, and column-to-column repeatability were within 8.9%. Under the optimum conditions, the developed methods were applied for the analyses of Chinese herbal medicine Catechu herbs and salbutamol aerosol samples.

Microporous poly(glycidyl methacrylate-co-ethylene glycol dimethyl acrylate) microspheres: synthesis, functionalization and applications

As a new kind of functional material, micron-sized porous polymer microspheres are a hot research topic in the field of polymer materials.

Chiral Nanoceramics

The study of different chiral inorganic nanomaterials has been experiencing rapid growth during the past decade, with its primary focus on metals and semiconductors. Ceramic materials can substantially expand the range of mechanical, optical, chemical, electrical, magnetic, and biological properties of chiral nanostructures, further stimulating theoretical, synthetic, and applied research in this area. An ever-expanding toolbox of nanoscale engineering and self-organization provides a chirality-based methodology for engineering of hierarchically organized ceramic materials. However, fundamental discoveries and technological translations of chiral nanoceramics have received substantially smaller attention than counterparts from metals and semiconductors. Findings in this research area are scattered over a variety of sources and subfields. Here, the diversity of chemistries, geometries, and properties found in chiral ceramic nanostructures are summarized. They represent a compelling materials platform for realization of chirality transfer through multiple scales that can result in new forms of ceramic materials. Multiscale chiral geometries and the structural versatility of nanoceramics are complemented by their high chiroptical activity, enantioselectivity, catalytic activity, and biocompatibility. Future development in this field is likely to encompass chiral synthesis, biomedical applications, and optical/electronic devices. The implementation of computationally designed chiral nanoceramics for biomimetic catalysts and quantum information devices may also be expected.

The Application of Covalent Organic Frameworks for Chiral Chemistry

Covalent organic frameworks (COFs) made their debut in 2005 and caused enthusiastic attention because of their ordered, crystalline structure. They are constructed with pure organic building blocks that are linked together by robust covalent linkages. COFs are applied in numerous fields due to their large surface area, architecture and chemistry stabilities, functional pore walls, and tunable frameworks. Incorporating COFs with chiral compounds can build chiral COFs (CCOFs), which have exhibited significant advantages in the chiral chemistry field. This review focuses on the applications of COFs for chiral catalysis, chiral separation, and chiral sensoring up to now. Furthermore, the synthesis and design strategies of CCOFs are also discussed in this article, since the COFs used in chiral chemistry are generally CCOFs. There also sums up the benefits and defects of COFs used in the chiral field and outlines future opportunities. The studies described in this review demonstrate not only the advantages of COFs in practical use but also novel solutions for the problems in the chirality area.

Recent developments of monolithic and open-tubular capillary electrochromatography (2017-2019)

Capillary electrochromatography, which combined the high selectivity of high-performance liquid chromatography and the high separation efficiency of capillary electrophoresis, is an attractive separation tool. In this review, the developments on monolithic and open tubular capillary electrochromatography during 2017 to August 2019 are summarized. Considering the development of novel stationary phases is the most active research field in capillary electrochromatography, monolithic capillary electrochromatography is classified according to the polymer-based and hybrid monolithic columns, while open-tubular capillary electrochromatography is categorized by cyclodextrin, silica, polymer, nanomaterials, microporous materials, and biomaterials-based open tubular columns.

Clinical and pharmaceutical applications of affinity ligands in capillary electrophoresis: A review

Affinity capillary electrophoresis (ACE) is a separation technique that combines a biologically-related binding agent with the separating power and efficiency of capillary electrophoresis. This review will examine several classes of binding agents that have been used in ACE and applications that have been described for the resulting methods in clinical or pharmaceutical analysis. Binding agents that will be considered are antibodies, aptamers, lectins, serum proteins, carbohydrates, and enzymes. This review will also describe the various formats in which each type of binding agent has been used in CE, including both homogeneous and heterogeneous methods. Specific areas of applications that will be considered are CE-based immunoassays, glycoprotein/glycan separations, chiral separations, and biointeraction studies. The general principles and formats of ACE for each of these applications will be examined, along with the potential advantages or limitations of these methods.

Recent applications of immobilized biomaterials in herbal analysis

Immobilization of biomaterials developed rapidly due to the great promise in improving their stability, activity and even selectivity. In this review, the immobilization strategies of biomaterials, including physical adsorption, encapsulation, covalent attachment, cross-linking and affinity linkage, were briefly introduced. Then, the major emphasis was focused on the reported various types of immobilized biomaterials, including proteins, enzymes, cell membrane and artificial membrane, living cells, carbohydrates and bacteria, used in the herbal analysis for bioactive compound screening, drug-target interaction evaluation and chiral separation. In addition, a series of carrier materials applied in biomaterials immobilization, such as magnetic nanoparticles, metal-organic frameworks, silica capillary column, cellulose filter paper, cell membrane chromatography, immobilized artificial membrane chromatography and hollow fiber, were also discussed. Perspectives on further applications of immobilized biomaterials in herbal analysis were finally presented.

Covalent organic framework incorporated chiral polymer monoliths for capillary electrochromatography

A covalent organic framework, Schiff base network-1 (SNW-1), was synthesized and incorporated into cellulase based poly(glycidyl methacrylate-co-ethylene dimethacrylate) (cellulase@poly(GMA-EDMA-SNW-1)) monolith to afford a novel chiral stationary phase for capillary electrochromatography (CEC). SNW-1 is attractive as a stationary phase for CEC because it not only features high surface areas but also provides conjugate structures and abundant amine groups to give π-π electrostatic stacking and hydrogen bonding property. Incorporation of SNW-1 into monolithic column could improve the column efficiency and increase the interactions between the tested racemates and the stationary phase thus significantly improved their CEC separation. The obtained monoliths were characterized by scanning electron microscopy, elemental analysis and nitrogen adsorption. Moreover, effects of SNW-1 concentration, immobilization pH of cellulase and CEC conditions were also investigated. Under the optimized conditions, the cellulase@poly(GMA-EDMA-SNW-1) monolith exhibited excellent enantioseparation performance for eight pairs of different classes of chiral drugs including β-blockers, antihistamines and anticoagulants. Satisfactory repeatability was achieved with relative standard deviations for intra-day, inter-day and column-to-column runs less than 4.5%, and batch-to-batch runs less than 6.8%. The experiment results reveal that the combination of the versatile features of monoliths and unique properties of SNW-1 could be a promising strategy for chiral separation.