Oxygen vacancies-driven signal enhanced photoelectrochemical sensor for mercury ions detection

Mercury ion (Hg2+) poses a serious threat to human health due to its high toxicity. In this study, a smartphone-based photoelectrochemical sensor based on oxygen vacancies (OVs) driven signal enhancement for mercury ion detection was designed. BiVO4-x/Bi2S3/AuNPs were combined with T-Hg2+-T recognition mode to construct a multi-sandwich photoelectrochemical sensor. On the one hand, the OVs can increase the adsorption of light by the materials and enhance the photocurrent response as well as the superconductivity of Au NPs to accelerate the charge transfer at the electrode interface. On the other hand, the multi-sandwich structure was exploited to increase the binding site of Hg2+, as well as the T-Hg2+-T structure for sensitive recognition of Hg2+ and signal amplification. The sensor showed good linearity for Hg2+ concentration in the range of 0.1 nM-1.0 μM with a detection limit of 4.8 pM (S/N = 3). Eventually the smartphone-based real-time detection sensor is expected to contribute to the future analysis of heavy metal ions.

A novel technique to overcome fluid flow influence in carbon quantum dots/paper-based analytical devices

Paper-based analytical devices are promising choices for rapid tests and lab-on-chip detection techniques. Carbon quantum dots (CQDs), on the other hand, are biocompatible nanomaterials, which are industrially promising, due to their fast and cost-effective gram-scale synthesis techniques, as well as their significantly high and stable photoluminescence (PL) properties, which are durable and reliable over a year. However, there have been limitations in the entrapment of CQDs on cellulose papers in a way that their PL is not influenced by the flowing of the CQDs with the stream of analyte fluid, making the sensors less accurate at very low concentrations of liquid analytes. Therefore, in this investigation, a polyvinyl alcohol/alkaline-based method was systematically generated and developed to entrap CQDs inside a 3D crystalline matrix on paper, in a way that they can be used directly as probes for a simple drop-and-detect method. As a proof of concept, N/P-doped CQD on cellulose paper was used to make fluorescent paper-based analytical devices for identifying traces of Hg²⁺ of around 100 ppb. The designed sensor was tested over several months, to study its durability and functionality over long periods, for potential industrial applications.

Green Synthesis of Nitrogen–Doped Carbon Dots from Fresh Tea Leaves for Selective Fe3+ Ions Detection and Cellular Imaging

In this research, we successfully developed a green, economical and effective one–step hydrothermal method for the synthesis of fluorescent nitrogen–doped carbon dots (N–CDs) by utilizing fresh tea leaves and urea as the carbon and nitrogen sources, respectively. The obtained N–CDs were characterized by TEM, XPS and FT–IR. We found that the N–CDs were near–spherical with an average size of about 2.32 nm, and contained abundant oxygen and nitrogen functional groups. The N–CDs exhibited bright blue fluorescence under ultraviolet illumination, with the maximum emission at 455 nm. Meanwhile, the as–prepared N–CDs could be selectively quenched by Fe3+ ions. The quenching of N–CDs is linearly correlated with the concentration of Fe3+ in the range of 0.1–400 μM with a low detection limit of 0.079 μM. Significantly, the N–CDs present excellent biocompatibility and high photostability. The results also depict that multicolor fluorescence is displayed under a fluorescence microscope and successfully applied for the detection of intracellular Fe3+. To sum up, the fluorescent N–CDs are expected to be a sensitive detection probe for Fe3+ in biological systems.

Carbon dots-magnetic nanocomposites for the detection and removal of Hg2

The dual functional detection and removal of heavy ion metals by carbon dots has become an urgent matter of concern. Here, a unique fluorescent carbon dot-magnetic nanocomposite (Fe₃O₄/CDs) was prepared by hydrothermal methods for sensitive detection of Hg²⁺. The Fe₃O₄/CDs serve as fluorescent probes with higher selectivity and sensitivity for Hg²⁺, with the lowest detectable limit of 0.3 nM. Hg²⁺ statically quenched the blue emission of Fe₃O₄/CDs, which can be restored in the presence of saturated EDTA solution. The utilization of Fe₃O₄/CDs was fulfilled by recovering their emission conveniently. The recovery of Hg²⁺ in Chagan Lake water, tap water and drinks was calculated at 96.5 ~ 108.8%, which demonstrates the feasibility of the Fe₃O₄/CDs sensing system in natural samples. Notably, the Fe₃O₄/CDs can drive the effective removal of Hg²⁺ from samples, which is of outstanding significance as a promising probe in environmental monitoring.

Nanomaterial-Integrated Cellulose Platforms for Optical Sensing of Trace Metals and Anionic Species in the Environment

The development of disposable sensors that can be easily adapted to every analytical problem is currently a hot topic that is revolutionizing many areas of science and technology. The need for decentralized analytical measurements at real time is increasing for solving problems in areas such as environment pollution, medical diagnostic, food quality assurance, etc., requiring fast action. Despite some current limitations of these devices, such as insufficient detection capability at (ultra)trace level and risk of interferent effects due to matrix, they allow low-cost analysis, portability, low sample consumption, and fast response. In the last years, development of paper-based analytical devices has undergone a dramatic increase for on-site detection of toxic metal ions and other pollutants. Along with the great availability of cellulose substrates, the immobilization of receptors providing enhanced recognition ability, such as a variety of nanomaterials, has driven the design of novel sensing approaches. This review is aimed at describing and discussing the different possibilities arisen with the use of different nanoreceptors (e.g., plasmonic nanoparticles, quantum dots, carbon-based fluorescent nanoparticles, etc.) immobilized onto cellulose-based substrates for trace element detection, their advantages and shortcomings.