Barrier Dispersion-Based Coatings Containing Natural and Paraffin Waxes

Petroleum, synthetic, and natural waxes have been used as hydrophobic bases for dispersions intended for use as barrier coatings for packaging paper. Oil-in-water dispersions with alkaline pH were prepared by a two-step homogenization procedure containing paraffin wax, with various characteristics, the Fischer–Tropsch synthesis product or beeswax. The size of the dispersed particles determined by dynamic light scattering depended on the type of hydrophobic base used and was in the range of 350–440 nm. The ability of dispersion particles in aggregation driven by electrostatic attraction, evaluated by Zeta potential analysis by electrophoretic light scattering, was from −26 to −50 mV. Static multiply light scattering was used for 30 days of stability assessment and helped to select the dispersion with a Sarawax SX70 wax base as the most stable. Dispersions were further used for coating the backing of kraft paper by the Meyer rod method. Coated paper with an applied coating of 6 g/m² had very good hydrophobic properties (Cobb60 < 4 g/m²), sufficient strength properties, and air permeation, which enabled its application as a packaging material. The dispersions based on Sarawax SX70 wax were evaluated as the best coating for Mondi ProVantage Kraftliner 125 g/m² backing paper. Good hydrophobic properties and strength properties indicate the possibility of using the SX70-based wax dispersion coating as a replacement for PFAS coatings in some applications.

Fabrication of bioinspired edible liquid marble with phase transition and tunable water barrier property

Based on aphid wax-honeydew marble and the hydrophobic wax structure of lotus and its derived applications with superareophilic and superhydrophobic properties, edible carnauba wax and beeswax particles were mixed and utilized to mimic lotus wax and wrap liquid, thus forming liquid marbles (LMs). Through the utilization of continuous production system (CPS), wax as an interfacial surfactant, water and solid, air-phase or mixed-phase marble content was produced. The edible liquid marble (ELM) could encapsulate water and food droplets. Edible solid marble (ESM) and edible solid hollow marbles (ESHMs) could be fabricated by applying pectin or syrup. Moreover, through the heating of wax powders with different melting temperatures, stable tablets and hollow capsules could be produced. The wax powder as interfacial surfactant could firmly bind with pectin through hydrogen bonds on ESM. The edible LMs can therefore be applied for residue reduction, corrosion reduction, biohazard prevention and cleaning in the food industry. The other phase LMs could act as novel tools in the pharmaceutical and food industries with the above-mentioned water transport, preservation, sustained releasing and selective releasing abilities.

GRAPHIC ABSTRACT

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s42242-021-00158-z.

Preparation of Edible Non-wettable Coating with Soybean Wax for Repelling Liquid Foods with Little Residue

Liquid food adhesion on containers has increased food waste and pollution, which could be effectively alleviated with a superhydrophobic surface. In this research, the superhydrophobic coating was fabricated with edible soybean wax on different substrates by a spraying method. The coated surface showed excellent superhydrophobicity due to its microstructure formed by self-roughening, which could repel a variety of viscous liquid food with the apparent contact angle of 159 ± 2°. The coated surface was still liquid-repellent after hot water immersion (45 °C), abrasion test with sandpaper, water impact, finger touch and immersion into yogurt. The liquid-repellent coating with soybean wax, which is natural and green, is promising for application in the food industry to reduce waste.