Carbon-ZnO alternating quantum dot chains: electrostatic adsorption assembly and white light-emitting device application

Organosilicon-Based Carbon Dots and Their Versatile Applications

Carbon dots (CDs) are a newly discovered type of fluorescent material that has gained significant attention due to their exceptional optical properties, biocompatibility, and other remarkable characteristics. However, single CDs have some drawbacks such as self-quenching, low quantum yield (QY), and poor stability. To address these issues, researchers have turned to organosilicon, which is known for its green, economical, and abundant properties. Organosilicon is widely used in various fields including optics, electronics, and biology. By utilizing organosilicon as a synthetic precursor, the biocompatibility, QY, and resistance to self-quenching of CDs can be improved. Meanwhile, the combination of organosilicon with CDs enables the functionalization of CDs, which significantly expands their original application scenarios. This paper comprehensively analyzes organosilicon in two main categories: precursors for CD synthesis and matrix materials for compounding with CDs. The role of organosilicon in these categories is thoroughly reviewed. In addition, the paper presents various applications of organosilicon compounded CDs, including detection and sensing, anti-counterfeiting, optoelectronic applications, and biological applications. Finally, the paper briefly discusses current development challenges and future directions in the field.

Multiphoton excited singlet/triplet mixed self-trapped exciton emission

Multiphoton excited luminescence is of paramount importance in the field of optical detection and biological photonics. Self-trapped exciton (STE) emission with self-absorption-free advantages provide a choice for multiphoton excited luminescence. Herein, multiphoton excited singlet/triplet mixed STE emission with a large full width at half-maximum (617 meV) and Stokes shift (1.29 eV) has been demonstrated in single-crystalline ZnO nanocrystals. Temperature dependent steady state, transient state and time-resolved electron spin resonance spectra demonstrate a mixture of singlet (63%) and triplet (37%) mixed STE emission, which contributes to a high photoluminescence quantum yield (60.5%). First-principles calculations suggest 48.34 meV energy per exciton stored by phonons in the distorted lattice of excited states, and 58 meV singlet-triplet splitting energy for the nanocrystals being consistent with the experimental measurements. The model clarifies long and controversial debates on ZnO emission in visible region, and the multiphoton excited singlet/triplet mixed STE emission is also observed.

Carbon Nanodots with Nearly Unity Fluorescent Efficiency Realized via Localized Excitons

Carbon nanodots (CDs) have emerged as an alternative option for traditional nanocrystals due to their excellent optical properties and low toxicity. Nevertheless, high emission efficiency is a long-lasting pursuit for CDs. Herein, CDs with near-unity emission efficiency are prepared via atomic condensation of doped pyrrolic nitrogen, which can highly localize the excited states thus lead to the formation of bound excitons and the symmetry break of the π-electron conjugation. The short radiative lifetimes (<8 ns) and diffusion lengths (<50 nm) of the CDs imply that excitons can be efficiently localized by radiative recombination centers for a defect-insensitive emission of CDs. By incorporating the CDs into polystyrene, flexible light-converting films with a high solid-state quantum efficiency of 84% and good resistance to water, heating, and UV light are obtained. With the CD-polymer films as light conversion layers, CD-based white light-emitting diodes (WLEDs) with a luminous efficiency of 140 lm W-1 and a flat-panel illumination system with lighting sizes of more than 100 cm2 are achieved, matching state-of-the-art nanocrystal-based LEDs. These results pave the way toward carbon-based luminescent materials for solid-state lighting technology.

State-of-the-art developments in carbon quantum dots (CQDs): Photo-catalysis, bio-imaging, and bio-sensing applications

Carbon quantum dots (CQDs), the intensifying nanostructured form of carbon material, have exhibited incredible impetus in several research fields such as bio-imaging, bio-sensing, drug delivery systems, optoelectronics, photovoltaics, and photocatalysis, thanks to their exceptional properties. The CQDs show extensive photonic and electronic properties, as well as their light-collecting, tunable photoluminescence, remarkable up-converted photoluminescence, and photo-induced transfer of electrons were widely studied. These properties have great advantages in a variety of visible-light-induced catalytic applications for the purpose of fully utilizing the energy from the solar spectrum. The major purpose of this review is to validate current improvements in the fabrication of CQDs, characteristics, and visible-light-induced catalytic applications, with a focus on CQDs multiple functions in photo-redox processes. We also examine the problems and future directions of CQD-based nanostructured materials in this growing research field, with an eye toward establishing a decisive role for CQDs in photocatalysis, bio-imaging, and bio-sensing applications that are enormously effective and stable over time. In the end, a look forward to future developments is presented, with a view to overcoming challenges and encouraging further research into this promising field.

Exploration of Sulfur-Containing Nanoparticles: Synthesis, Microstructure Analysis, and Sensing Potential

In this work, three different sulfur sources such as sulfur powder, sodium sulfide, and sodium thiosulfate are selected to prepare sulfur-derived quantum dots (S-QDs), Na₂S-derived nanoparticles (NS-NPs), and Na₂S₂O₃^--derived QDs (NSO-QDs) in the presence of NaOH or assisted by hydrogen peroxide etching. The low sulfur percentage in the above three samples and the synthesis experiments in the presence of nitrogen/oxygen all support that poly(ethylene glycol) (PEG) plays an important role during the assembly process and the definition of sulfur dots is not accurate. For photophysical features, remarkable green quantum dots (S-QDs) possess an excitation-independent emission peak at 500 nm. But NS-NPs and NSO-QDs demonstrate observable shift tendency, and the evolution of emission profiles varies from 480 to 586 nm. NSO-QDs can be used as a fluorescent probe for highly selective and quantitative detection of Ni²⁺ in an aqueous solution in the presence of potential interfering ions with a low detection limit (0.18 μM) and a wide linear range (8-380 μM). Their reusability performance has also been demonstrated by employing dimethylglyoxime as the restoration reagent.

Carbon dot/inorganic nanomaterial composites

The preparation methods, formation mechanism, properties and applications of carbon dot/inorganic nanohybrid materials are reported.

ZnO UV Photodetectors Modified by Ag Nanoparticles Using All-Inkjet-Printing

To further improve the performance of all-inkjet-printing ZnO UV photodetector and maintain the advantages of inkjet printing technology, the inkjet printing Ag nanoparticles (NPs) were deposited on the inkjet printing ZnO UV photodetector for the first time. The inkjet printing Ag NPs can passivate the surface defects of ZnO and work as surface plasmons from the characterization of photoluminescence (PL), X-ray photoelectron spectroscopy (XPS), and finite difference time domain method (FDTD) simulation. The normalized detectivity (D*) of the Ag NP-modified detector reaches to 1.45 × 1010 Jones at 0.715 mW incident light power, which is higher than that of 5.72 × 109 Jones of the bare ZnO photodetector. The power-law relationship between the photocurrent and the incident light power of the Ag NP-modified ZnO detector is Ipc ∝ P2.34, which means the photocurrent is highly sensitive to the change of incident light power.

Hydrophilic ZnO Nanoparticles@Calcium Alginate Composite for Water Purification

Herein, hydrophilic ZnO nanoparticles@calcium alginate composite has been prepared by embedding hydrophilic ZnO nanoparticles (NPs) into calcium alginate. The hydrophilic ZnO NPs within the composites can act as a killer of bacteria, while calcium alginate can remove the organic impurities due to its adsorption capacity, thus realizing the purification of water via sterilization and removal of organics. A water purifier based on the composite has been demonstrated, the aerobic bacterial counts of the contaminated water can be decreased from 2240 to 9 cfu mL^-1, and the turbidity of the water is decreased to 0.51 NTU, which is below the maximum permissible of Guidelines for Drinking-water Quality designed by the World Health Organization. Sterilization mechanism studies show that the ZnO NPs can cause excessive oxidative stress in cells, inducing bacteria to produce large amounts of intracellular reactive oxygen species (ROS), which leads to the apoptosis of the bacteria.

Sonochemical Synthesis of Carbon Dots/Lanthanoid MOFs Hybrids for White Light-Emitting Diodes with High Color Rendering

Although lanthanoid metal-organic frameworks (Ln-MOFs) have been widely developed for white light-emitting diodes (WLEDs), the color rendering index (CRI) values are still lower than 80. To overcome this limitation, a series of CDs/Ln-MOFs hybrids, namely, CDs-2@Ln-MOF, CDs-3@Ln-MOF, and CDs-4@Ln-MOF containing blue-emitting CDs and yellow-emitting bimetallic [(Eu_1.22Tb_0.78(1,4-phda)₃(H₂O)](H₂O)₂ were prepared via sonication at room temperature to restrict the self-quenching of CDs in composite materials. The as-synthesized composite materials were investigated by Fourier transform infrared, powder X-ray diffraction, transmission electron microscopy, scanning electron microscopy, and photoluminescence. The luminescent color of the materials can be adjusted by varying the amount of CDs and excitation wavelengths. The resulting CDs-3@Ln-MOF achieved excellent CRI up to 93 with the ideal Commission International ed'Eclairage coordinate (0.334, 0.334) and appropriate correlated color temperature (CCT) (5443 K). In addition, the tunable multicolored luminescence based on single and bimetallic Eu_xTb_2-x(1,4-phda)₃(H₂O)](H₂O)₂, x = 0, 0.73, 1.22, 1.57, 1.94, and 2, were applied as the luminescent security inks for anti-counterfeiting application through encoding/decoding and rewritable data.

Efficient Red/Near-Infrared-Emissive Carbon Nanodots with Multiphoton Excited Upconversion Fluorescence

Red/near-infrared (NIR) emissive carbon nanodots (CNDs) with photoluminescence (PL) quantum yield (QY) of 57% are prepared via an in situ solvent-free carbonization strategy for the first time. 1-Photon and 2-photon cellular imaging is demonstrated by using the CNDs as red/NIR fluorescence agent due to the high PL QY and low biotoxicity. Further study shows that the red/NIR CNDs exhibit multiphoton excited (MPE) upconversion fluorescence under excitation of 800-2000 nm, which involves three NIR windows (NIR-I, 650-950 nm; NIR-II, 1100-1350; NIR-III, 1600-1870 nm). 2-Photon, 3-photon, and 4-photon excited fluorescence of the CNDs under excitation of different wavelengths is achieved. This study develops an in situ solvent-free carbonization method for efficient red/NIR emissive CNDs with MPE upconversion fluorescence, which may push forward the application of the CNDs in bioimaging.

Deep-Ultraviolet Emissive Carbon Nanodots

Deep-ultraviolet (DUV) emissive carbon nanodots (CNDs) have been designed theoretically and demonstrated experimentally based on the results of first-principles calculations using the density functional theory method. The emission of the CNDs is located in the range from 280 to 300 nm, which coincides well with the results of theoretical calculation results. The photoluminescence (PL) quantum yield (QY) of the CNDs is up to 31.6%, and the strong emission of the CNDs originates from core-state (π-π*) carriers' radiative recombination and surface passivation. Benefiting from the core-state emission and surface group passivation, the emission of the CNDs is independent of the excitation wavelength and ambient solvent. DUV light-emitting diodes (LEDs) have been fabricated based on the DUV emissive CNDs, and the LEDs can be used as the excitation source to excite blue, green, and red CNDs, indicating their potential application in DUV light sources. This work may provide a clue for the designing and realizing of DUV emissive CNDs, thus promising the potential application of CNDs in DUV light-emitting sources.

Fluorescent Nano-Biomass Dots: Ultrasonic-Assisted Extraction and Their Application as Nanoprobe for Fe3+ detection

Biomass as sustainable and renewable resource has been one of the important energy sources for human life. Herein, luminescent nano-biomass dots (NBDs) have been extracted from soybean through ultrasonic method, which endows biomass with fluorescence property. The as-prepared NBDs are amorphous in structure with an average diameter of 2.4 nm and show bright blue fluorescence with a quantum yield of 16.7%. Benefiting from the edible raw materials and heating-free synthesis process, the cytotoxicity test shows that the cell viability still keeps 100% even if the concentration of the NBDs reaches 800 μg/ml, indicating the good biocompatibility of the NBDs. In addition, the fluorescence of the NBDs is very sensitive to Fe3+, which can be used for Fe3+ detection in terms of their health superiority. The limit of detection (LOD) of the proposed sensor was determined as 2.9 μM, which is lower than the maximum allowable level of Fe3+ (5.37 μM) in drinking water.

Carbon dots produced via space-confined vacuum heating: maintaining efficient luminescence in both dispersed and aggregated states

Aggregation-induced quenching (AIQ) of emission is an obstacle for the development of carbon dots (CDots) for solid-state luminescent devices. In this work, we introduce a method to avoid AIQ and to produce highly luminescent CDots through a space-confined vacuum heating synthesis. In the presence of CaCl₂, a mixture of citric acid and urea forms an inflated foam under vacuum heating at 120 °C. Upon gradually increasing the heating temperature to 250 °C, blue emissive molecular species are first formed, and are then transformed into uniform-sized green emissive CDots through dehydration and carbonization processes taking place in the confined ultrathin spaces of the foam walls. The green luminescence of these CDots originates from conjugated sp² domains, and these CDots exhibit a high photoluminescence quantum yield (PLQY) of 72% in ethanol solution. Remarkably, due to the existence of only one type of recombination center in these nanoparticles, AIQ does not take place in CDot-based close-packed films, which show strong emission with a PLQY of 65%. Utilizing the differences in the emission properties of vacuum heating produced CDots, CDots synthesized through microwave-assisted heating, and commercial green fluorescent organic ink (namely, excitation-dependent vs. excitation-independent emission, and different stability against photobleaching), multilevel data encryption has been demonstrated.

Fingerprint identification of copper ions with absorption and emission dual-mode responses by N,S co-doped red carbon dots

Highly selective and sensitive Cu²⁺-based sensors have been successfully developed by N,S co-doped red emissive carbon dots with absorption and emission dual-mode recognition strategies.

Highly fluorescent carbon dots as an efficient nanoprobe for detection of clomifene citrate

Highly fluorescent carbon dots (CDs) were synthesized through facile hydrothermal carbonization and ethylenediamine passivation of an easily available prawn shell precursor. The as-prepared CDs exhibit high water solubility, wavelength-tunable fluorescence with quantum yield up to 68.9%, high photostability and resistance against biomolecules, thus enabling the application as viable fluorescent nanoprobes for detection of guest quenchers. The fluorescence of the CDs can be effectively quenched by clomifene citrate (CC, a common drug for infertility) through static quenching, and therefore can serve as a simple and efficient fluorescent nanoprobe for determination of CC with wide linear range (0.25–10 μg mL⁻¹) and low detection limit (0.2 μg mL⁻¹). The CDs also showed low cytotoxicity, which enables the safe and accurate fluorescent detection of spiked CC in human serum, demonstrating their potential as a credible fluorescent CC nanoprobe in clinical examination.

Highly fluorescent carbon dots (CDs) were synthesized through facile hydrothermal carbonization and ethylenediamine passivation of an easily available prawn shell precursor.

In situ aluminium ions regulation for quantum efficiency and light stability promotion in white light emitting material

In this study, we have proposed an in situ ion regulation strategy to assemble a white-light-emitting material with high stability and efficiency. A fluorescence tunable hybrid material was first fabricated by a “ship around the bottle” method in which the fluorescent dyes, disodium 2-naphthol-3,6-disulfonate (R) and ZnO Quantum Dots (QDs), were embedded into metal–organic frameworks (MOFs) in proportion. Then, the competition coordination of aluminium ions over zinc ions to R were utilized to subtly adjust the intensity of blue fluorescence, leading to an ideal white light with Commission Internationale de l'Eclairage (CIE) coordinates of (0.30, 0.33) and a high Color-Rendering Index (CRI) value of 93%. Compared with the material fabricated by the ratio tuning of the R salt and ZnO QDs directly, the in situ ions regulation strategy enabled the final product to have a higher quantum efficiency and light stability. Moreover, this strategy also settled the non-tunable problem of fluorescence due to the competition coordination effects of aluminium ions and zinc ions in the same synthetic system. This synthetic strategy and our new findings can provide more ideas for designing new white-light-emitting materials.

An in situ ion regulation strategy to assemble white-light-emitting material with high stability and efficiency.