Binary "island" shaped arrays with high-density hot spots for surface-enhanced Raman scattering substrates

Self-Organized SERS Substrates with Efficient Analyte Enrichment in the Hot Spots

One of the requirements of an efficient surface-enhanced Raman spectroscopy (SERS) substrate is a developed surface morphology with a high density of "hot spots", nm-scale spacings between plasmonic nanoparticles. Of particular interest are plasmonic architectures that could enable self-localization (enrichment) of the analyte in the hot spots. We report a straightforward method of fabrication of efficient SERS substrates that comply with these requirements. The basis of the substrate is a large-area film of tightly packed SiO2 spheres formed by their quick self-assembling upon drop casting from the solution. Thermally evaporated thin Ag layer is converted by quick thermal annealing into nanoparticles (NPs) self-assembled in the trenches between the silica spheres, i.e., in the places where the analyte molecules get localized upon deposition from solution and drying. Therefore, the obtained substrate morphology enables an efficient enrichment of the analyte in the hot spots formed by the densely arranged plasmonic NPs. The high efficiency of the developed SERS substrates is demonstrated by the detection of Rhodamine 6G down to 10-13 mol/L with an enhancement factor of ∼108, as well as the detection of low concentrations of various nonresonant analytes, both small dye molecules and large biomolecules. The developed approach to SERS substrates is very straightforward for implementation and can be further extended to using gold or other plasmonic NPs.

Quantification of uric acid concentration in tears by using PDMS inverse opal structure surface-enhanced Raman scattering substrates: Application in hyperuricemia

Hyperuricemia is closely related to a variety of diseases and has been listed as one of the twenty most persistent diseases in the 21st century by the United Nations. Therefore, strengthening the diagnosis of hyperuricemia has become imperative. Here, ordered inverse opal array structures (PAANs) composed of PDMS and gold nanoparticles (AuNPs) have been designed using a bottom-up self-assembly method. The structures exhibit a periodic distribution of hot spots, an enhancement factor (EF) of 4.22 × 10⁴, and a relative standard deviation (RSD) of signal intensity of less than 5%, which can provide high reproducibility of SERS signals. The PAANs substrate is used to detect uric acid in the tears of patients with hyperuricemia, and the limit of detection is 6.03 μM. The significant linear relationship between blood uric acid and tear uric acid indicates that the developed method is a rapid, effective, and non-invasive technique for the determination of uric acid in tears.

Flexible surface-enhanced Raman scatting substrates: recent advances in their principles, design strategies, diversified material selections and applications

Surface-enhanced Raman scattering (SERS) is widely used as a powerful analytical technology in cutting-edge areas such as food safety, biology, chemistry, and medical diagnosis, providing ultra-fast, ultra-sensitive, nondestructive characterization and achieving ultra-high detection sensitivity even down to the single-molecule level. Development of Raman spectroscopy is strongly dependent on high-performance SERS substrates, which have long evolved from the early days of rough metal electrodes to periodic nanopatterned arrays building on solid supporting substrates. For rigid SERS substrates, however, their applications are restricted by sophisticated pretreatments for detecting solid samples with non-planar surfaces. It is therefore essential to reassert the principles in constructing flexible SERS substrates. Herein, we comprehensively review the state-of-the-art in understanding, preparing and using flexible SERS. The basic mechanisms behind the flexible SERS are briefly outlined, typical design strategies are highlighted and diversified selection of materials in preparing flexible SERS substrates are reviewed. Then the recent achievements of various interdisciplinary applications based on flexible SERS substrates are summarized. Finally, the challenges and perspectives for future evolution of flexible SERS and their applications are demonstrated. We propose new research directions focused on stimulating the real potential of SERS as an advanced analytical technique for commercialization.

Silver Nanopillar Arrayed Thin Films with Highly Surface-Enhanced Raman Scattering for Ultrasensitive Detection

Surface-enhanced Raman scattering (SERS) technique based on surface plasmon resonance has been considerably investigated in recent years due to its superior sensitivity in the detection of organic or biological molecules at trace levels. However, most research usually focuses on artificial architectures as SERS substrates that always have a complex and expensive micro-nanofabrication process. The high cost of masks for SERS substrates becomes a key obstacle for the widespread commercialization of SERS technology. In this paper, a biomimetic SERS substrate composed of silver-coated nanopillar arrays on the top of a cicada wing was advanced to overcome these challenges as both substrates and masks. Benefiting from the high near-field plasmon resonance coupling at the limited space among neighboring nanopillars, a dramatically increased SERS signal can be achieved using rhodamine 6G (R6G) as a model molecule. Encouragingly, the analytical enhancement factor of the order of more than 10⁸ has been conveniently realized with a reliable detection concentration of R6G of about 100 pM or less. This work provides a promising route for designing cost-effective and highly sensitive SERS substrates and the related mask fabrication using our previously proposed template transfer nanoimprint.

A Separation-Sensing Platform Performing Accurate Diagnosis of Jaundice in Complex Biological Tear Fluids

The detection of biomarkers in tears has aroused great interest owing to the advantages of non-invasive and rapid collection. The combination of ultrasensitivity and label-free detection of surface-enhanced Raman spectroscopy (SERS) sensors is expected to achieve real-time diagnosis in home medical care. However, the surface of SERS sensors is susceptible to biofouling and inactivation by biological impurities in tears, resulting in rapid degradation of sensitivity, limiting the commercialization of point-of-care devices. Herein, a binary nanosphere array with dual properties is constructed as a separation-sensing platform for the diagnosis of target molecules in tears. The upper part of the structure is composed of Au nanoparticles (AuNPs) and a sputtering Au layer, which can bind the target molecules that interact with Au and provide high-strength and high-density SERS hotspots. The lower half is an inactive SiO₂ nanosphere array with periodic large pores that allows biological impurities to penetrate the lower part and be separated from the target analyte. Furthermore, this substrate was integrated into homemade tear kits, enabling simultaneous tear collection, pre-separation, and detection. Combined with the Raman spectra of tears and LDA analysis, we successfully identified patients with jaundice in clinics. This platform is expected to provide an opportunity for early disease screening based on biological fluids.

Recent Advances in Agglomeration Detection and Dual-Function Application of Surface-Enhanced Raman Scattering (SERS)

Surface-enhanced Raman scattering (SERS) has been widely utilized in early detection of disease biomarkers, cell imaging, and trace contamination detection, owing to its ultra-high sensitivity. However, it is also subject to certain application restrictions in virtue of its expensive detection equipment and long-term stability of SERS-active substrate. Recently, great progress has been made in SERS technology, represented by agglomeration method. Dual readout signal detection methods are combined with SERS, including electrochemical detection, fluorescence detection, etc., establishing a new fantastic viewpoint for application of SERS. In this review, we have made a comprehensive report on development of agglomeration detection and dual-function detection methods based on SERS. The synthesis methods for plasmonic materials and mainstream SERS enhancement mechanism are also summarized. Finally, the key facing challenges are discussed and prospects are addressed.

Combining printing and nanoparticle assembly: Methodology and application of nanoparticle patterning

Functional nanoparticles (NPs) with unique photoelectric, mechanical, magnetic, and chemical properties have attracted considerable attention. Aggregated NPs rather than individual NPs are generally required for sensing, electronics, and catalysis. However, the transformation of functional NP aggregates into scalable, controllable, and affordable functional devices remains challenging. Printing is a promising additive manufacturing technology for fabricating devices from NP building blocks because of its capabilities for rapid prototyping and versatile multifunctional manufacturing. This paper reviews recent advances in NP patterning based on the combination of self-assembly and printing technologies (including two-, three-, and four-dimensional printing), introduces the basic characteristics of these methods, and discusses various fields of NP patterning applications.

•

Nanoparticles (NPs) printing assembly is a good solution for patterned devices

•

NPs assembly can be combined with 2D, 3D, and 4D printing technologies

•

A variety of ink-dispersed NPs are available for printing assembly

•

NPs printing assembly technology is applied for nanosensing, energy storage, photodetector

Plasmonic Superstructure Arrays Fabricated by Laser Near-Field Reduction for Wide-Range SERS Analysis of Fluorescent Materials

Surface-enhanced Raman scattering (SERS) enables trace-detection for biosensing and environmental monitoring. Optimized enhancement of SERS can be achieved when the energy of the localized surface plasmon resonance (LSPR) is close to the energy of the Raman excitation wavelength. The LSPR can be tuned using a plasmonic superstructure array with controlled periods. In this paper, we develop a new technique based on laser near-field reduction to fabricate a superstructure array, which provides distinct features in the formation of periodic structures with hollow nanoclusters and flexible control of the LSPR in fewer steps than current techniques. Fabrication involves irradiation of a continuous wave laser or femtosecond laser onto a monolayer of self-assembled silica microspheres to grow silver nanoparticles along the silica microsphere surfaces by laser near-field reduction. The LSPR of superstructure array can be flexibly tuned to match the Raman excitation wavelengths from the visible to the infrared regions using different diameters of silica microspheres. The unique nanostructure formed can contribute to an increase in the sensitivity of SERS sensing. The fabricated superstructure array thus offers superior characteristics for the quantitative analysis of fluorescent perfluorooctanoic acid with a wide detection range from 11 ppb to 400 ppm.

Detection of glucose in diabetic tears by using gold nanoparticles and MXene composite surface-enhanced Raman scattering substrates

Diabetes has become one of the three chronic non-communicable diseases threatening human health in the world, and the detection of glucose concentration is of great importance for the prevention and treatment of diabetes. The noninvasive detection of glucose in tears has attracted interest over the past several decades, however, time-consuming, expensive equipment, and specialist technicians make tear analysis still challenging. Here, flexible surface-enhanced Raman scattering (SERS) substrates composed of gold nanoparticles (AuNPs) and two-dimensional MXene Ti₃C₂T_X nanosheets have been designed. The GMXeP (gold nanoparticles with MXene nanosheets loaded on paper) SERS substrates show good sensitivity, reproducibility, and stability, yielding an enhancement factor (EF) of 3.7 × 10⁵ at the concentration of 10^-9 M. The GMXeP SERS substrates are used to detect glucose of diabetic tears within a linear range of 1-50 μM, the lowest detection concentration is 0.39 μM and the significant correlation between tear glucose and blood glucose indicates that this method is suitable for sensitive and noninvasive detection of blood glucose.

Ultrasensitive detection of vitamin E by signal conversion combined with core-satellite structure-based plasmon coupling effect

A smart signal conversion and amplification strategy based on silver–gold–silica core-satellite structure nanoparticles to sensitively SERS detect vitamin E.

Instant interfacial self-assembly for homogeneous nanoparticle monolayer enabled conformal "lift-on" thin film technology

Thin film fabrication is of great importance in modern engineering. Here, we propose a universal and conformal thin film technique enabled by the wetting empowered interfacial self-assembly. By tailoring the contact angle of nanoparticle (NP), a NP monolayer can be assembled instantly (within 5 seconds) with an excellent harvesting efficiency (up to 97.5 weight %). This self-assembly strategy presents a universal applicability on various materials, e.g., nonmetal, metal, and core-shell structures, and can achieve a monolayer with same in-plane area as a 95 cm² wafer in a single process, indicating great potential for scale-up manufacturing. Through a template transfer, we coat the surface of different substrates (plastic, paper, etc.) with the assembled film in a conformal and nondestructive “lift-on” manner and subsequently demonstrate fluorescent micropatterns. This self-assembly strategy has great implications in advancing thin film technology in a user-friendly and cost-effective fashion for applications in anti-counterfeiting, actuators, and wearable/flexible electronics.

All-Opto Plasmonic-Controlled Bulk and Surface Sensitivity Analysis of a Paired Nano-Structured Antenna with a Label-Free Detection Approach

Gold nanoantennas have been used in a variety of biomedical applications due to their attractive electronic and optical properties, which are shape- and size-dependent. Here, a periodic paired gold nanostructure exploiting surface plasmon resonance is proposed, which shows promising results for Refractive Index (RI) detection due to its high electric field confinement and diffraction limit. Here, single and paired gold nanostructured sensors were designed for real-time RI detection. The Full-Width at Half-Maximum (FWHM) and Figure-Of-Merit (FOM) were also calculated, which relate the sensitivity to the sharpness of the peak. The effect of different possible structural shapes and dimensions were studied to optimise the sensitivity response of nanosensing structures and identify an optimised elliptical nanoantenna with the major axis a, minor axis b, gap between the pair g, and heights h being 100 nm, 10 nm, 10 nm, and 40 nm, respectively. In this work, we investigated the bulk sensitivity, which is the spectral shift per refractive index unit due to the change in the surrounding material, and this value was calculated as 526–530 nm/RIU, while the FWHM was calculated around 110 nm with a FOM of 8.1. On the other hand, the surface sensing was related to the spectral shift due to the refractive index variation of the surface layer near the paired nanoantenna surface, and this value for the same antenna pair was calculated as 250 nm/RIU for a surface layer thickness of 4.5 nm.

Coupling enhancement mechanisms, materials, and strategies for surface-enhanced Raman scattering devices

Surface-enhanced Raman scattering (SERS) has become one of the most sensitive analytical techniques for identifying the chemical components, molecular structures, molecular conformations, and the interactions between molecules. However, great challenges still need to be addressed until it can be widely accepted by the absolute quantification of analytes. Recently, many efforts have been devoted to addressing these issues via various electromagnetic (EM), chemical (CM), and EM-CM hybrid coupling enhancement strategies. In comparison with uncoupled SERS devices, they offer key advantages in terms of sensitivity, reproducibility, uniformity, stability, controllability and reliability. This review provides an in-depth analysis of coupled SERS devices, including coupling enhancement mechanisms, materials and approaches. Finally, we also discuss the remaining bottlenecks and possible strategies for the development of coupling-enhanced SERS devices in the future.

Gain-assisted critical coupling for enhanced optical absorption in graphene

Enhanced optical absorption in two-dimensional (2D) materials has recently moved into the focus of nanophotonics research. In this work, we present a gain-assisted method to achieve critical coupling and demonstrate the maximum absorption in undoped monolayer graphene in the near-infrared. In a two-port system composed of photonic crystal slab loaded with graphene, the gain medium is introduced to adjust the dissipative rate to match the radiation rate for the critical coupling, which is accessible without changing the original structural geometry. The appropriate tuning of the gain coefficient also enables the critical coupling absorption within a wide wavelength regime for different coupling configurations. This work provides a powerful guide to manipulate light-matter interaction in 2D materials and opens up a new path to design ultra-compact and high-performance 2D material optical devices.

A multimer-based SERS aptasensor for highly sensitive and homogeneous assay of carcinoembryonic antigens

Carcinoembryonic antigens (CEAs) are known as one of the most common tumor markers. Their facile and affordable detection is critical for early diagnosis of malignant tumors, especially in resource-constrained settings. Here, we report a novel multimer-based surface-enhanced Raman scattering (SERS) aptasensor for a specific CEA assay. The aptasensor is fabricated through aptamer-assisted self-assembly of silver-coated gold nanoparticles (Au@Ag NPs), and the self-assembled multimeric structure possesses abundant hot-spots to provide high SERS response. When CEA is introduced, the specific recognition of CEA by aptamers will lead to the disassembly of Au@Ag multimers due to the lack of a bridging aptamer between Au@Ag NPs. As a result, the number of hot-spots in the multimeric system is decreased, and the intensity at 1585 cm-1 of the SERS reporter (4-mercaptobenzoic acid, 4-MBA) on the surface of NPs will also be decreased. The Raman intensity is proportional to the logarithm of the concentration of CEA. The detection sensitivity can be down to the pg mL-1 level. The analytical method only needs a droplet of 2 μL of sample, and the detection time is less than 20 min. The multimer-based SERS aptasensor can be applied in sensitive and inexpensive detection of CEA in serum samples.

Synergistic plasmon resonance coupling and light capture in ordered nanoarrays as ultrasensitive and reproducible SERS substrates

An effective SERS substrate for on-field detection needs to satisfy high sensitivity to analyte and signal reproducibility even in the special case of tilting or bending of substrates. Herein, we transferred monolayer AuNPs into a nanocavity to construct a Au particle-in-hemispherical honeycomb nanoarray (PIHHN) as an ultrasensitive and spatially reproducible SERS substrate. The capacity of detection for R6G in an optimal PIHHN substrate is as low as a concentration of 10^-15 M, and the RSD of signal deviation is no more than 5.6%. FDTD simulations explain that placing AuNPs into a metallic nanocavity can capture and focus the light field to improve the interaction between the light and the substrate and provide the collective effect of multiple plasmon coupling, which can induce a stronger electromagnetic field. In addition, the system can generate more hot spots between AuNPs and between AuNPs and the metallic nanocavity. In particular, when the substrate is tilted or bent at an angle from 0° to 60°, the SERS performance remains stable due to the rotational symmetry of the PIHHN structure, which demonstrates the capability of on-field detection. Furthermore, the PIHHN substrate is employed as a highly sensitive multiplex sensor in on-field analysis for contaminated soil, achieving the detection of analytes down to 0.5 ppb.

Lab-On-Capillary Platform for On-Site Quantitative SERS Analysis of Surface Contaminants Based on Au@4-MBA@Ag Core-Shell Nanorods

A portable and highly reproducible lab-on-capillary surface-enhanced Raman scattering (SERS) platform was developed using a specially designed homemade device for rapid on-site SERS measurement. In particular, this platform was composed of a capillary with a tiny orifice, which allows an effective and lossless sample extraction, resulting in high SERS performance. The capillary-based plasmonic substrate was prepared by compactly assembling Au@Ag core-shell nanorods (NRs) embedded with the 4-mercaptobenzoic acid (4-MBA) molecule as an internal standard onto the inner wall of a capillary tube. The fabrication process is facile and convenient with no requirement for complicated procedures. The exclusively prepared nanoparticles were able to significantly improve the signal consistency and overcome the limitations of reliable quantitative SERS analysis compared with conventional methods. Importantly, it was found that this capillary-based substrate with higher sensitivity was essentially attributed to more valid nanoparticles in the effective laser excitation region derived from the unique structure of the capillary. Furthermore, the applicability of the Au@4-MBA@Ag nanorod-decorated capillary for the quantitative identification of fungicides (malachite green and crystal violet) on the shell was demonstrated. As a result, this proposed lab-on-capillary sensor holds promising practical potential for rapid on-site analysis, especially for various contaminants on an uneven surface.

Sandwich-Like Sensor for the Highly Specific and Reproducible Detection of Rhodamine 6G on a Surface-Enhanced Raman Scattering Platform

Nonspecificity and low reproducibility are always the main challenges in surface-enhanced Raman scattering (SERS) detection, especially for testing real samples. In this study, we developed a sandwich-like sensor (AuA-pMIP) to detect rhodamine 6G (R6G) by integrating a porous molecularly imprinted polymer (pMIP) with a well-ordered AuNP array (AuA). To form a uniformly distributed hot spot, AuA was fabricated at an oil-water interface and was subsequently fixed between pMIP and a support slide. Finite-difference time-domain simulation indicated that the enhanced electric field covered a distance of ∼2 μm above the AuA, in which the pMIP provided effective mass-transfer channels and sufficient specific binding sites for target molecules. High specificity for AuA-pMIP in R6G detection was demonstrated by comparing the SERS performance of R6G on AuA-pMIP with that of its structural analogues on the same sensor. Remarkably, the stable sandwich-like structure allowed us to achieve a recyclable SERS sensor with high reproducibility. Finally, AuA-pMIP displayed excellent specificity and sensitivity toward R6G in a test based on a real orange juice sample. This study presents a promising method to achieve real sample testing on a SERS platform.

Pressure-induced SERS enhancement in a MoS2/Au/R6G system by a two-step charge transfer process

Pressure-induced surface-enhanced Raman spectroscopy (PI-SERS) represents a new frontier in the research field of SERS. However, relatively few studies have focused on PI-SERS due to many difficulties, such as easy aggregation of nanoparticles, and difficulty in understanding the interaction mechanisms between probe molecules and the SERS substrate at high pressure. Here we developed an efficient semiconductor-metal SERS substrate (MoS₂/Au) to study PI-SERS. Different from the previously reported monotonous decrease in Raman intensities upon compression, an anomalous Raman enhancement of R6G molecules adsorbed on the MoS₂/Au substrate was observed up to 2.39 GPa, at which the degree of charge transfer (ρ_CT) between the R6G molecules and the MoS₂/Au substrate reaches a maximum. By comparison, it is proposed that the decoration of Au on the SERS system could bring about a two-step charge transfer (CT) process, introduce localized surface plasmon resonance (LSPR), and thus favor the PI-SERS enhancement. Moreover, this charge transfer also causes obvious changes in the optical behaviors of R6G molecules upon compression. This brings new insights into the SERS study and also offers new ideas for the development of SERS application in high pressure studies.

Polymer induced one-step interfacial self-assembly method for the fabrication of flexible, robust and free-standing SERS substrates for rapid on-site detection of pesticide residues

We have demonstrated a one-step approach for the fabrication of flexible, robust, reproducible and free-standing SERS substrates (AuNPs/polyvinyl chloride (PVC) film) through a polymer induced interfacial self-assembly method. In this method, the polymer (PVC) plays dual roles, that is, inducing the interfacial self-assembly of nanoparticles and fixing the assembled nanostructure in the PVC matrix. As the assembled nanoparticles are orderly half-embedded in the PVC film, the AuNPs/PVC film exhibits outstanding reproducibility and stability. In addition, the film could be easily regenerated by rinsing with NaBH4 solution. As a proof of concept, the film was directly wrapped on an apple surface for in situ detection of pesticide residues, and a detection limit of 10 ng cm-2 thiram was achieved. Furthermore, rapid on-site and in situ detection of multi-pesticide residues has been proved to be feasible with the aid of a portable Raman spectrometer. Due to its simple preparation, good reliability, outstanding stability and reusability, the AuNPs/PVC film has great potential in practical applications.

A Tunable Plasmonic Refractive Index Sensor with Nanoring-Strip Graphene Arrays

In the present study, we design a tunable plasmonic refractive index sensor with nanoring-strip graphene arrays. The calculations prove that the nanoring-strip have two transmission dips. By changing the strip length L of the present structure, we find that the nanoring-strip graphene arrays have a wide range of resonances (resonance wavelength increases from 17.73 μm to 28.15 μm). When changing the sensing medium refractive index n_med, the sensitivity of mode A and B can reach 2.97 μm/RIU and 5.20 μm/RIU. By changing the doping level n_g, we notice that the transmission characteristics can be tuned flexibly. Finally, the proposed sensor also shows good angle tolerance for both transverse magnetic (TM) and transverse electric (TE) polarizations. The proposed nanoring-strip graphene arrays along with the numerical results could open a new avenue to realize various tunable plasmon devices and have a great application prospect in biosensing, detection, and imaging.