Porous platinum-silver bimetallic alloys: surface composition and strain tunability toward enhanced electrocatalysis

Bimetallic AgPt Nanoalloys as an Electrocatalyst for Ethanol Oxidation Reaction: Synthesis, Structural Analysis, and Electro-Catalytic Activity

In the present work, the chemical synthesis of AgPt nanoalloys is reported by the polyol method using polyvinylpyrrolidone (PVP) as a surfactant and a heterogeneous nucleation approach. Nanoparticles with different atomic compositions of the Ag and Pt elements (1:1 and 1:3) were synthesized by adjusting the molar ratios of the precursors. The physicochemical and microstructural characterization was initially performed using the UV-Vis technique to determine the presence of nanoparticles in suspension. Then, the morphology, size, and atomic structure were determined using XRD, SEM, and HAADF-STEM techniques, confirming the formation of a well-defined crystalline structure and homogeneous nanoalloy with an average particle size of less than 10 nm. Finally, the cyclic voltammetry technique evaluated the electrochemical activity of bimetallic AgPt nanoparticles supported on Vulcan XC-72 carbon for the ethanol oxidation reaction in an alkaline medium. Chronoamperometry and accelerated electrochemical degradation tests were performed to determine their stability and long-term durability. The synthesized AgPt (1:3)/C electrocatalyst presented significative catalytic activity and superior durability due to the introduction of Ag that weakens the chemisorption of the carbonaceous species. Thus, it could be an attractive candidate for cost-effective ethanol oxidation compared to commercial Pt/C.

Laser-Induced Synthesis of Electrocatalytically Active Ag, Pt, and AgPt/Polyaniline Nanocomposites for Hydrogen Evolution Reactions

We present an efficient and easily implemented approach for creating stable electrocatalytically active nanocomposites based on polyaniline (PANI) with metal NPs. The approach combines in situ synthesis of polyaniline followed by laser-induced deposition (LID) of Ag, Pt, and AgPt NPs. The observed peculiarity of LID of PANI is the role of the substrate during the formation of multi-metallic nanoparticles (MNP). This allows us to solve the problem of losing catalytically active particles from the electrode's surface in electrochemical use. The synthesized PANI/Ag, PANI/Pt, and PANI/AgPt composites were studied with different techniques, such as SEM, EDX, Raman spectroscopy, and XPS. These suggested a mechanism for the formation of MNP on PANI. The MNP-PANI interaction was demonstrated, and the functionality of the nanocomposites was studied through the electrocatalysis of the hydrogen evolution reaction. The PANI/AgPt nanocomposites demonstrated both the best activity and the most stable metal component in this process. The suggested approach can be considered as universal, since it can be extended to the creation of electrocatalytically active nanocomposites with various mono- and multi-metallic NPs.

Laser-ablation assisted strain engineering of gold nanoparticles for selective electrochemical CO2 reduction

Strain engineering can endow versatile functions, such as refining d-band center and inducing lattice mismatch, on catalysts for a specific reaction. To this end, effective strain engineering for introducing strain on the catalyst is highly sought in various catalytic applications. Herein, a facile laser ablation in liquid (LAL) strategy is adopted to synthesize gold nanoparticles (Au NPs) with rich compressive strain (Au-LAL) for electrochemical CO₂ reduction. It is demonstrated that the rich compressive strain can greatly promote the electrochemical CO₂ reduction performance of Au, achieving a CO partial current density of 24.9 mA cm^-2 and a maximum CO faradaic efficiency of 97% at -0.9 V for Au-LAL, while it is only 2.77 mA cm^-2 and 16.2% for regular Au nanoparticles (Au-A). As revealed by the in situ Raman characterization and density functional theory calculations, the presence of compressive strain can induce a unique electronic structure change in Au NPs, significantly up-shifting the d-band center of Au. Such a phenomenon can greatly enhance the adsorption strength of Au NPs toward the key intermediate of CO₂ reduction (i.e., *COOH). More interestingly, we demonstrate that, an important industrial chemical feedstock, syngas, can be obtained by simply mixing Au-LAL with Au-A in a suitable ratio. This work provides a promising method for introducing strain in metal NPs and demonstrates the important role of strain in tuning the performance and selectivity of catalysts.

Three-in-One Strategy to Improve Both Catalytic Activity and Selectivity: Nonconcentric Pd-Au Nanoparticles

In direct H₂O₂ synthesis, the Pd-Au alloy was considered as a potential catalyst because of its much better performance compared to the prototype Pd; unfortunately, achieving both high activity and selectivity remains a challenge. Here, we synthesized nonconcentric Pd-Au NPs in which Au domain shells are formed only partially on Pd domain cores and tested them for direct H₂O₂ synthesis. It has three exposed regions of Pd, Au domains, and Pd-Au interfaces in a single NP (hence, a 3-in-1 strategy). Creating nonconcentric forms was demonstrated convincingly by density functional theory calculations. The nonconcentric Pd-Au particles exhibit high and well-balanced performances that are hard to achieve with traditional alloyed Pd-Au. The number of Pd/Au interfaces was found to be the key factor and thus was optimized by controlling the Au precursor concentrations. The hitherto underutilized structure of nonconcentric bimetallic alloys can be useful and thus should be more actively investigated for catalyst development.

Assembly of Bimetallic PdAg Nanosheets and Their Enhanced Electrocatalytic Activity toward Ethanol Oxidation

The direct ethanol fuel cells in an alkaline medium have a broad vision of applications because of their large energy density, reasonable power density, and environmentally friendly features. Herein, we present a facile one-step method to synthesize PdAg nanosheet assemblies (NSAs) in a mixed solution of N,N-dimethylformamide and water with the addition of molybdenum hexacarbonyl and cetyltrimethylammonium bromide. Pure Pd NSA shows an irregular shape while PdAg NSAs gradually undergo a process from solid assembly to a hollow structure with the Pd/Ag molar ratio changing from 3:1 to 2:1 to 1:1. The formation of alloy nanosheets in the assemblies combined with the introduction of Ag in the Pd catalyst enhances the catalytic activity toward ethanol electrooxidation from 1524 mA mg^-1 of pure Pd NSA to 1866 mA mg^-1 of PdAg NSA with a Pd/Ag molar ratio of 2:1. On the basis of the experimental data, compared with pure Pd structures, both the nature of a thin nanosheet of PdAg NSAs and the structural changes in the alloy assemblies play key roles in determining the electrocatalytic activity of these Pd-based catalysts.

Reactive nanotemplates for synthesis of highly efficient electrocatalysts: beyond simple morphology transfer

Efficient electrocatalysts for energy conversion in general, and fuel cell operation and water electrolysis in particular, are pivotal for carbon-free hydrogen production. While the requirements of successful electrocatalysts include a high number density of catalytically active sites, high surface-to-volume ratio, inherently high catalytic activity, and robustness of the catalyst surface structure under harsh operating conditions, it is extremely difficult to synthesize nanocatalysts that could possess all these structural characteristics. Nanotemplate-mediated synthesis, namely, the coating or filling of a template with a desired material phase followed by the removal of the template, has captured the interest of researchers because of the ease of creating hollow-structured nanocatalysts with a high surface to volume ratio. Recent studies, however, have revealed that nanotemplates could be more than just passive supports because they greatly affect catalytic performance by creating an unusual synergy between the substrate and catalyst and by providing dopants to the actual catalyst phase owing to their reactive nature. In this review, we discuss the most notable recent advances in the nanotemplate-based synthesis of electrocatalysts as well as the unusual effects of nanotemplates on the performance of nanocatalysts. We also provide an outlook for this fledgling field so that future research efforts could be focused on the development of practically useful electrocatalysts that could shape the future of energy technologies.

H2-Induced coalescence of Pt nanoparticles for the preparation of ultrathin Pt nanowires with high-density planar defects

Construction of planar defects within a metallic catalyst can significantly improve its catalytic performance. However, it remains a huge challenge to introduce planar defects during the synthesis of metallic catalysts. In this work, we have reported an effective approach for the preparation of Pt nanowires with high-density planar defects. The success of the approach mainly relies on the attaching and merging of small Pt nanoparticles at low temperatures with the assistance of H2. By comparing the catalytic activities of Pt nanowires with high-density planar defects and commercial Pt/C catalysts toward methanol oxidation reactions, we show that the existence of planar defects can markedly enhance the electrocatalytic performance of the Pt nanowires. The Pt nanowires of 2.0 nm in diameter show a factor of 6.1 enhancement in specific activity and a factor of 5.4 enhancement in mass activity, respectively, for this reaction, compared to the commercial Pt/C catalyst. The method developed in this work could be an effective route to introduce planar defects within Pt catalysts, endowing them with much enhanced catalytic properties.

Amplified oxygen reduction signal at a Pt-Sn-modified TiO2 nanocomposite on an electrochemical aptasensor

In this work, a metallic composite with strong electrocatalytic property was designed by uniformly decorating Pt and Sn nanoparticles on the surface of TiO₂ nanorods (Pt-Sn@TiO₂). A detection scheme was then developed based on a dual signal amplification strategy involving the Pt-Sn@TiO₂ composite and exonuclease assisted target recycling. The Pt-Sn@TiO₂ composite exhibited an enhanced oxygen reduction current owing to the synergistic effect between Pt and Sn, as well as high exposure of Pt (111) crystal face. Initially, a Pt-Sn@TiO₂ modified glassy carbon electrode produced an amplified electrochemical signal for the reduction of dissolved oxygen in the analyte solution. Next, a DNA with a complementary sequence to a streptomycin aptamer (cDNA) was immobilised on the Pt-Sn@TiO₂ modified electrode, followed by the streptomycin aptamer that hybridised with cDNA. The corresponding oxygen reduction current was diminished by 51% attributable to the hindrance from the biomolecules. After a mixture of streptomycin and RecJ_f exonuclease was introduced, both the streptomycin-aptamer complex and the cDNA were cleaved from the electrode, making the Pt-Sn and Pt (111) surface available for oxygen reduction. RecJ_f would also release streptomycin from the streptomycin-aptamer complex, allowing it to complex again with aptamers on the electrode. This has then promoted a cyclic amplification of the oxygen reduction current by 85%, which is quantitatively related to streptomycin. Under optimal conditions, the aptasensor exhibited a linear range of 0.05-1500 nM and a limit of detection of 0.02±0.0045 nM streptomycin. The sensor was then used in the real-life sample detection of streptomycin to demonstrate its potential applications to bioanalysis.