Thermal insulation with 2D materials: liquid phase exfoliated vermiculite functional nanosheets

Synergistic Combination of Dual Clays in Multilayered Nanocomposites for Enhanced Flame Retardant Properties

In an effort to reduce the flammability of synthetic polymeric materials such as cotton fabrics and polyurethane foam (PUF), hybrid nanocoatings are prepared by layer-by-layer assembly. Multilayered nanocomposites of a cationic polyelectrolyte, poly(diallyldimethylammonium chloride) (PDDA), are paired with two kinds of clay nanoplatelets, montmorillonite (MMT) and vermiculite (VMT). The physical properties such as thickness and mass and thermal behaviors in clay-based nanocoatings with and without incorporation of tris buffer are compared to assess the effectiveness of amine salts on flame retardant (FR) performances. A PDDA-tris/VMT-MMT system, in which tris buffer is introduced into the cationic PDDA aqueous solution, produces a thicker and heavier coating. Three different systems, including PDDA/MMT, PDDA/VMT-MMT, and PDDA-tris/VMT-MMT, result in conformal coating, retaining the weave structure of the fabrics after being exposed to a vertical and horizontal flame test, while the uncoated sample is completely burned out. The synergistic effects of dual clay-based hybrid nanocoatings are greatly improved by adding amine salts. Cone calorimetry reveals that the PDDA-tris/VMT-MMT-coated PUF eliminates a second peak heat release rate and significantly reduces other FR performances, compared to those obtained from the clay-based multilayer films with no amine salts added. Ten bilayers of PDDA-tris/VMT-MMT (≈250 nm thick) maintain the shape of foam after exposure to a butane torch flame for 12 s. As for practical use of these nanocomposites in real fire disasters, spray-assisted PDDA-tris/VMT-MMT multilayers on woods exhibit high resistance over flammability. Improved fire resistance in PDDA-tris/VMT-MMT is believed to be due to the enhanced char yield through the addition of tris buffer that promotes the deposition of more clay particles while retaining a highly ordered deposition of a densely packed nanobrick wall structure. This work demonstrates the ability to impart significant fire resistance to synthetic polymer materials in a fully renewable nanocoating that uses environmentally benign chemistry.

Stacking-induced phonon transport engineering of siligene

Tunable phonon transport properties of two-dimensional materials are desirable for effective heat management in various application scenarios. Here, we demonstrate by first-principles calculations and Boltzmann transport theory that the lattice thermal conductivity of siligene could be efficiently engineered by forming various stacking configurations. Unlike few-layer graphene, the stacked siligenes are found to be covalently bonded along the out-of-plane direction, which leads to unique dependence of the thermal conductivity on both the stacking order and layer number. Due to the restricted flexural phonon scattering induced by the horizontal reflection symmetry, the AA stacking configuration of bilayer siligene exhibits obviously higher thermal conductivity compared with the AB stacking. In addition, we observe increasing thermal conductivity with the layer number, as evidenced by the reduced phonon scattering phase space and Grüneisen parameter. Interestingly, the Fuchs-Sondheimer model works well for the thickness-dependent thermal conductivity of stacked siligenes.

Nanobrick Wall Multilayer Thin Films with High Dielectric Breakdown Strength

Current thermally conductive and electrically insulating insulation systems are struggling to meet the needs of modern electronics due to increasing heat generation and power densities. Little research has focused on creating insulation systems that excel at both dissipating heat and withstanding high voltages (i.e., have both high thermal conductivity and a high breakdown strength). Herein, a polyelectrolyte-based multilayer nanocomposite is demonstrated to be a thermally conductive high-voltage insulation. Through inclusion of both boehmite and vermiculite clay, the breakdown strength of the nanocomposite was increased by ≈115%. It was also found that this unique nanocomposite has an increase in its breakdown strength, modulus, and hydrophobicity when exposed to elevated temperatures. This readily scalable insulation exhibits a remarkable combination of breakdown strength (250 kV/mm) and thermal conductivity (0.16 W m-1 K-1) for a polyelectrolyte-based nanocomposite. This dual clay insulation is a step toward meeting the needs of the next generation of high-performance insulation systems.

Scalable Production of 2D Minerals by Polymer Intercalation and Adhesion for Multifunctional Applications

Natural and sustainable 2D minerals have many unique properties and may reduce reliance on petroleum-based products. However, the large-scale production of 2D minerals remains challenging. Herein, a green, scalable, and universal polymer intercalation and adhesion exfoliation (PIAE) method to produce 2D minerals such as vermiculite, mica, nontronite, and montmorillonite with large lateral sizes and high efficiency, is developed. The exfoliation relies on the dual functions of polymers involving intercalation and adhesion to expand interlayer space and weaken interlayer interactions of minerals, facilitating their exfoliation. Taking vermiculite as an example, the PIAE produces 2D vermiculite with an average lateral size of 1.83 ± 0.48 µm and thickness of 2.40 ± 0.77 nm at a yield of ≈30.8%, surpassing state-of-the-art methods in preparing 2D minerals. Flexible films are directly fabricated by the 2D vermiculite/polymer dispersion, exhibiting outstanding performances including mechanical strength, thermal resistance, ultraviolet shielding, and recyclability. The representative application of colorful multifunctional window coatings in sustainable buildings is demonstrated, indicating the potential of massively produced 2D minerals.

Recent Progress on Natural Clay Minerals for Lithium-Sulfur Batteries

Li-S batteries with high energy density have the potential to become a viable alternative to Li-ion batteries. However, Li-S batteries still face several challenges, including the shuttle effect, low conversion kinetics, and Li dendrite growth. Natural clay minerals with porous structures, abundant Lewis-acid sites, high mechanical modulus, and versatile structural regulation show great potential for improving the performance of Li-S batteries. However, so far, relevant reviews focusing on the applications of natural clay minerals in Li-S batteries are still missing. To fill the gap, this review first presents an overview of the crystal structures of several natural clay minerals, including 1D (halloysites, attapulgites, and sepiolite), 2D (montmorillonite and vermiculite), and 3D (diatomite) structures, providing a theoretical basis for the application of natural clay minerals in Li-S batteries. Subsequently, research advancements in the natural clay-based energy materials in Li-S batteries have been comprehensively reviewed. Finally, the perspectives concerning the development of natural clay minerals and their applications in Li-S batteries are provided. We hope this review can provide timely and comprehensive information on the correlation between the structure and function of natural clay minerals in Li-S batteries and offer guidance for material selection and structure optimization of natural clay-based energy materials.

Unique ion rectifier intermediate enabled by ultrathin vermiculite sheets for high-performance Zn metal anodes

Metallic Zn represents as a primary choice in fabricating various aqueous Zn-ion batteries (ZIBs), while challenging issues include dendrite growth and parasitic reactions at the anode/electrolyte interface, considerably hamper its practical implementation in large-scale energy storage. Herein, we originally develop a low-cost multifunctional ion rectifier (IRT) as an artificial intermediate to reform Zn anode, which can practically eliminate the above issues. The hydrophobic shell (polyvinylidene difluoride) can suppress Zn interfacial corrosion with an inhibition efficiency of 94.8% by repelling water molecules from the bulk electrolyte. Additionally, negatively-charged ion channels inside the zincophilic core (ultrathin vermiculite sheets) induce de-solvating redistribution effect on Zn²⁺ ions flux, enabling a high ions transference number (0.79) for dendrite-free Zn deposition. This leads to exceptional Zn/Zn²⁺ reversibility in metallic Zn with IRT stabilization. The remarkable Coulombic efficiency (99.8%, 2000 cycles) for asymmetrical batteries, and a long-lasting lifespan (1600 h) with ultrahigh cumulative capacity of 2400 mAh cm^-2 for symmetrical batteries, are successfully achieved. More encouragingly, the Zn//NH₄V₄O₁₀ pouch cell retains 94.3% of its original capacity after 150 cycles at 1 A g^-1. We believe that this low-cost and high-efficiency tactic could pave a promising path for anode surface modification.

The Stability and Properties of Polystyrene/Kaolinite Nanocomposites during Synthesis via Emulsion Polymerization

The aim of this work was to study the stability and morphological properties of polystyrene latex containing kaolinite as a filler during the process of synthesis of nanocomposites viaemulsion polymerization. Nanocomposites with 1, 3, and 5 wt% of kaolinite were prepared. Latexes with 1 to 3 wt% of kaolinite were stable during the polymerization reaction. Hydrodynamic diameters of 93.68 and 82.11 nm were found for latexes with 1 and 3 wt% of kaolinite, respectively. The quantities of 1 to 3 wt% of kaolinite added during the reaction did not influence the reaction conversion curves or the number of particles. X-ray diffraction (XRD) and unconventional techniques of scanning electron microscopy (SEM) and high-resolution transmission electron microscopy (HRTEM) showed the presence of exfoliated and intercalated structures of the kaolinite.

Cerium biosorption onto alginate/vermiculite-based particles functionalized with ionic imprinting: Kinetics, equilibrium, thermodynamic, and reuse studies

Cerium is an essential element for several applications in industry, therefore, recovering it from secondary sources is a promising strategy from an economic and environmental perspective. For this purpose, biosorption is a low-cost and effective alternative. The present work evaluated the recovery of Ce³⁺ from aqueous solutions using alginate/vermiculite-based particles (ALEV) functionalized by ionic imprinting. From the kinetic assays, it was verified that the uptake of Ce³⁺ followed the pseudo-second-order model and was mainly controlled by external diffusion. The Langmuir model better described the equilibrium data, and a maximum biosorption capacity of 0.671 mmol/g at 45 °C was attained. The evaluation of the thermodynamic quantities revealed that the process occurs spontaneously and endothermically. The particles reuse and Ce³⁺ recovery were achieved using 0.1 mol/L HCl or 1.0 mol/L CaCl₂ solutions for up to four cycles of biosorption/desorption. The biosorbent was characterized before and posted Ce³⁺ biosorption to investigate the morphology, textural properties, crystallinity, thermal resistance, composition, and functional groups of the biosorbent.

Selective Ion Transport in Two-Dimensional Lamellar Nanochannel Membranes

Precise and ultrafast ion sieving is highly desirable for many applications in environment-, energy-, and resource-related fields. The development of a permselective lamellar membrane constructed from parallel stacked two-dimensional (2D) nanosheets opened a new avenue for the development of next-generation separation technology because of the unprecedented diversity of the designable interior nanochannels. In this Review, we first discuss the construction of homo- and heterolaminar nanoarchitectures from the starting materials to the emerging preparation strategies. We then explore the property-performance relationships, with a particular emphasis on the effects of physical structural features, chemical properties, and external environment stimuli on ion transport behavior under nanoconfinement. We also present existing and potential applications of 2D membranes in desalination, ion recovery, and energy conversion. Finally, we discuss the challenges and outline research directions in this promising field.

The Expanded Vermiculite Was Quickly Prepared by the Catalytic Action of Manganese Dioxide on Hydrogen Peroxide and Its Adsorption Properties to Cd

The structure and activity of vermiculite can be maintained by expanding vermiculite (Vrm) with hydrogen peroxide. However, it is time-consuming. In past studies, little attention has been paid to the catalytic properties of manganese dioxide on hydrogen peroxide to improve the swelling efficiency of vermiculite. In this experiment, this catalytic effect was utilized to swell Vrm in a short time. The samples were then used to adsorb Cd from the solution. Through a series of characterization tests. The results showed that the exothermic rate was 1960.42-2089.164 J/min and the total exothermic heat was 39,208.4-41,783.28 J when expanding 10 gVrm, which could have a good expansion effect. The expansion was completed in about 40 min. Compared with Vrm, the adsorption of Cd is enhanced by about 30%. It is consistent with the proposed secondary kinetic adsorption model. This study provides a new perspective and theoretical guidance for improving the efficiency of Vrm stripping by hydrogen peroxide. A kind of expanded Vrm with better Cd adsorption efficiency was also prepared.

Facile Synthesis of Two-Dimensional Natural Vermiculite Films for High-Performance Solid-State Electrolytes

Ceramic electrolytes hold application prospects in all-solid-state lithium batteries (ASSLB). However, the ionic conductivity of ceramic electrolytes is limited by their large thickness and intrinsic resistance. To cope with this challenge, a two-dimensional (2D) vermiculite film has been successfully prepared by self-assembling expanded vermiculite nanosheets. The raw vermiculite mineral is first exfoliated to thin sheets of several atomic layers with about 1.2 nm interlayer channels by a thermal expansion and ionic exchanging treatment. Then, through vacuum filtration, the ion-exchanged expanded vermiculite (IEVMT) sheets can be assembled into thin films with a controllable thickness. Benefiting from the thin thickness and naturally lamellar framework, the as-prepared IEVMT thin film exhibits excellent ionic conductivity of 0.310 S·cm^-1 at 600 °C with low excitation energy. In addition, the IEVMT thin film demonstrates good mechanical and thermal stability with a low coefficient of friction of 0.51 and a low thermal conductivity of 3.9 × 10^-3 W·m^-1·K^-1. This reveals that reducing the thickness and utilizing the framework is effective in increasing the ionic conductivity and provides a promising stable and low-cost candidate for high-performance solid electrolytes.

Two-dimensional nanovermiculite and polycaprolactone electrospun fibers composite scaffolds promoting diabetic wound healing

BACKGROUND

Promoting diabetic wound healing is still a challenge, and angiogenesis is believed to be essential for diabetic wound healing. Vermiculite is a natural clay material that is very easy to obtain and exhibits excellent properties of releasing bioactive ions, buffering pH, adsorption, and heat insulation. However, there are still many unsolved difficulties in obtaining two-dimensional vermiculite and using it in the biomedical field in a suitable form.

RESULTS

In this study, we present a versatile organic-inorganic composite scaffold, which was constructed by embedding two-dimensional vermiculite nanosheets in polycaprolactone electrospun fibers, for enhancing angiogenesis through activation of the HIF-1α signaling pathway and promoting diabetic wound healing both in vitro and in vivo.

CONCLUSIONS

Together, the rational-designed polycaprolactone electrospun fibers-based composite scaffolds integrated with two-dimensional vermiculite nanosheets could significantly improve neo-vascularization, re-epithelialization, and collagen formation in the diabetic wound bed, thus promoting diabetic wound healing. This study provides a new strategy for constructing bioactive materials for highly efficient diabetic wound healing.

Novel preparation of attapulgite-reduced graphene oxide hydrogel composite and its application in flexible solid-state supercapacitors

After graphite oxide assisted the liquid phase shear exfoliation of attapulgite, the good dissociation and dispersion of attapulgite rod crystals are realized. Due to the spatial hindrance effect of attapulgite, which prevents the stacking of RGO sheets, the attapulgite-reduced graphene oxide three-dimensional porous hydrogel with abundant pore structure enables rapid transfer of electrolyte ions and exhibits good electrochemical performance and rate performance. The assembled flexible solid-state supercapacitor has a high operating voltage window and good flexibility and cycle stability. At a current density of 0.1 mA cm^-2, it has an area specific capacitance of 127.33 mF cm^-2. A series of solid-state supercapacitors can be used as the power supply for LED lights.

Two-dimensional biomaterials: material science, biological effect and biomedical engineering applications

To date, nanotechnology has increasingly been identified as a promising and efficient means to address a number of challenges associated with public health. In the past decade, two-dimensional (2D) biomaterials, as a unique nanoplatform with planar topology, have attracted explosive interest in various fields such as biomedicine due to their unique morphology, physicochemical properties and biological effect. Motivated by the progress of graphene in biomedicine, dozens of types of ultrathin 2D biomaterials have found versatile bio-applications, including biosensing, biomedical imaging, delivery of therapeutic agents, cancer theranostics, tissue engineering, as well as others. The effective utilization of 2D biomaterials stems from the in-depth knowledge of structure-property-bioactivity-biosafety-application-performance relationships. A comprehensive summary of 2D biomaterials for biomedicine is still lacking. In this comprehensive review, we aim to concentrate on the state-of-the-art 2D biomaterials with a particular focus on their versatile biomedical applications. In particular, we discuss the design, fabrication and functionalization of 2D biomaterials used for diverse biomedical applications based on the up-to-date progress. Furthermore, the interactions between 2D biomaterials and biological systems on the spatial-temporal scale are highlighted, which will deepen the understanding of the underlying action mechanism of 2D biomaterials aiding their design with improved functionalities. Finally, taking the bench-to-bedside as a focus, we conclude this review by proposing the current crucial issues/challenges and presenting the future development directions to advance the clinical translation of these emerging 2D biomaterials.

A thermally insulating vermiculite nanosheet-epoxy nanocomposite paint as a fire-resistant wood coating

Conventional fire-retardant composite coatings are typically made of organic-based materials that reduce flame spread rates. However, the associated chemical reactions and starting precursors produce toxic and hazardous gases, affecting the environment and contributing to climate change. Wood is one of the most common materials used in construction and households, and thin-film fire-retardant coatings are needed to protect it from fire. Here, we derive high-performance nanocomposite paint-based coatings from naturally occurring and highly insulating layered vermiculite. The coatings are made using different weight percentages of shear-exfoliated vermiculite nanosheets in an epoxy matrix and are brush-coated onto teak wood. A series of tests using coated wooden rods and standard fire retardancy tests confirm a reduction in flame spread and combustion velocity with minimal toxic smoke release. Samples coated with the vermiculite/epoxy nanocomposite paint resist fire propagation, and post-combustion analysis indicates their resistance to thermal degradation. Our results offer a novel and eco-efficient solution to minimize the flame propagation rate, enhancing char development, and expand the scope of applications of ultra-thin vermiculite in nanocomposite coatings as a fire retardant, exploiting its low thermal conductivity in thermal insulation systems.

Self-templated microwave-assisted hydrothermal synthesis of two-dimensional holey hydroxyapatite nanosheets for efficient heavy metal removal

Heavy metals have caused serious environmental problems and threat to human health. Ultrathin and holey two-dimensional (2D) nanosheets have recently drawn significant attention as superb adsorbent material to remove heavy metal ions due to their unique physicochemical properties. Herein, we report a self-template-directed ultrafast reaction route to synthesis porous hydroxyapatite (Ca₁₀(PO₄)₆(OH)₂) nanosheets via a microwave-assisted hydrothermal method using poly(allylamine hydrochloride) as an additive. The resulting hydroxyapatite nanosheets showed a high specific surface area (92.9 m² g^-1) and excellent adsorption performance for various heavy metal ions including Pb(II), Cu(II), and Cd(II), with maximum adsorption capacities of 210.5, 31.6, and 24.9 mg g^-1, respectively. The adsorption kinetics fitted well with the pseudo-second-order equation and the equilibrium data showed a high correlation coefficient with the Langmuir model. Based on the experimental results and analysis, we can conclude that the sorption of heavy metal ions with the hydroxyapatite nanosheets mainly attributes to surface complexation and cation exchange. The present synthetic strategy allows the fast and massive production of porous hydroxyapatite ultrathin nanosheets and may also potentially be applicable to the fabrication of other metal phosphates with assembled or hierarchical porous structures towards various applications such as water purification.

Facile synthesis of exfoliated vermiculite nanosheets as a thermal stabilizer in polyvinyl chloride resin

Well-defined vermiculite (VMT) nanosheets have been exfoliated from mineral VMT by a water-assisted anion-exchange approach. The resultant VMT nanosheets are utilized as a thermal stabilizer in polyvinyl chloride (PVC) to resist dehydrochlorination of PVC. As expected, the color-blackening onset of PVC is delayed after incorporating VMT nanosheets, and the thermal stability improves with reducing the particle size of the VMT nanosheets. The dehydrochlorination temperature appears to be increased by 13 °C for the PVC resin with 6 wt% VMT additive. The improved thermal stability is attributed to the negatively charged laminates of VMT that stabilize hydrogen chloride produced from thermal degradation of PVC. This work not only provides a cost-effective approach to prepare VMT nanosheets but also presents new insight towards the design of thermal stabilizers.

Well-defined vermiculite nanosheets are exfoliated by a facile water-assisted anion-exchange approach. As its negatively charged laminates can stabilize hydrogen chloride, the VMT nanosheets show excellent thermal stability for PVC resin.