Fluid release pressure for nanochannels: the Young-Laplace equation using the effective contact angle

A New Capillary-Channel Agarose Sponge Assembled with Deep Eutectic Solvent Based Magnetic Fluid for Rapid Hemostasis and Prevention of Bacterial Infection

A new composite sponge assisted by magnetic field-mediated guidance was developed for effective hemostasis. It was based on polydopamine capillary-channel agarose (PDA-CAGA) sponge as matrix; meanwhile, the combination of deep eutectic solvent (DES, choline chloride:glycerol = 1:1, M/M)-dispersed Fe3O4 nanoparticles after fabrication by tannic acid (DES-Fe3O4@TA) was applied as hemostatic magnetic fluid. This sponge had oriented and aligned capillary channels realized by a 3D printed pattern, which endowed them with obvious shape memory and liquid absorption performance. Computational simulation was performed to describe the fluid status in channels; DES-Fe3O4@TA exhibited good magnetic properties, fluidity, and stability. In addition, the sponge driven to react rapidly with the bleeding site under the effect of a magnetic field presented a shorter hemostasis time (reduced by 85.02% in the tail and 81.07% in the liver of rats) and less blood loss (reduced by 97.08% in the tail and 91.50% in the liver) than those of medical gelatin sponge (GS). Meanwhile, the multifunctional material also exhibited better biocompatibility, procoagulant performance, and significant inhibition on S. aureus and E. coli than GS. As a whole, this work proposed a new strategy for rapid hemostasis by designing a magnetic field assisted composite bacteriostatic material, which also expanded the applications of green solvents in the clinical management field.

Thin continuous membrane coating with high surface energy for comprehensive antifouling seawater distillation

Membrane distillation (MD) has prominent advantages such as treating high-salinity wastewater with a low-grade thermal energy, high salt rejection, and zero discharge. However, organic fouling and mineral scaling are two major challenges for hydrophobic MD membranes when used for practical applications. Commonly, improving organic fouling- and mineral scaling-resistance require oppositely enhanced wetting properties of membrane, thus is difficult to simultaneously realize dual resistance with one membrane. Here, we proposed to use underwater thermodynamically stable high-surface-energy coating to modify the hydrophobic membrane with Janus structures comprising different surface energy. The underlayered structure meets the hydrophobicity requirements of the MD membrane, while the coating layer realizes dual resistance to organic and inorganic foulants. Theoretical analysis and experimental proof reveal that the membrane with the high-surface-energy coating layer outperforms the pristine one with approximately 10 times of longevity. This strategy provides a new way for the use of high-surface-energy materials in versatilely fouling-resistant MD process.

Numerical Study of the Effect of High Gravity in Material Extrusion System and Polymer Characteristics during Filament Fabrication

Polymer science plays a crucial role in the understanding and numerical study of material extrusion processes that have revolutionized additive manufacturing (AM). This study investigated the impact of high-gravity conditions on material extrusion and conducted a numerical study by referring to the development of a high-gravity material extrusion system (HG-MEX). In this study, we evaluated the polymeric characteristics of HG-MEX. By analyzing the interplay between polymer behavior and gravity, we provide insights into the effects of high gravity on extrusion processes, including filament flow, material deposition, and the resulting fabrication characteristics. The established numerical study of high-gravity material extrusion in additive manufacturing is a meaningful and valuable approach for improving the quality and efficiency of the process. This study is unique in that it incorporates material surface characteristics to represent the performance and contact with polymer science in additive manufacturing. The findings presented herein contribute to a broader understanding of polymer science and its practical implications for HG-MEX under various gravitational conditions.

Scalable and switchable CO2-responsive membranes with high wettability for separation of various oil/water systems

Smart membranes with responsive wettability show promise for controllably separating oil/water mixtures, including immiscible oil-water mixtures and surfactant-stabilized oil/water emulsions. However, the membranes are challenged by unsatisfactory external stimuli, inadequate wettability responsiveness, difficulty in scalability and poor self-cleaning performance. Here, we develop a capillary force-driven confinement self-assembling strategy to construct a scalable and stable CO₂-responsive membrane for the smart separation of various oil/water systems. In this process, the CO₂-responsive copolymer can homogeneously adhere to the membrane surface by manipulating the capillary force, generating a membrane with a large area up to 3600 cm² and excellent switching wettability between high hydrophobicity/underwater superoleophilicity and superhydrophilicity/underwater superoleophobicity under CO₂/N₂ stimulation. The membrane can be applied to various oil/water systems, including immiscible mixtures, surfactant-stabilized emulsions, multiphase emulsions and pollutant-containing emulsions, demonstrating high separation efficiency (>99.9%), recyclability, and self-cleaning performance. Due to robust separation properties coupled with the excellent scalability, the membrane shows great implications for smart liquid separation.

Study on the Manipulation Strategy of Metallic Microstructures Based on Electrochemical-Assisted Method

Microcomponent manipulation (MCM) technology plays a decisive role in assembling complex systems at the micro- and nanoscale. However, the existing micromanipulation methods are difficult to widely apply in the manufacturing of microelectromechanical systems (MEMSs) due to the limited manipulation space and complex application objects, and the manipulation efficiency is relatively low, which makes it difficult to industrialize these micromanipulating systems. To solve the above problems, this paper proposes an efficient metal MCM strategy based on the electrochemical method. To verify the feasibility and repeatability of the strategy, the finite element model (FEM) incorporating the hydrodynamic and electrochemical theories is used to calculate the local stress distribution of the contact position during the dynamic pick-up process. Based on the simulation results, we defined the relationship between the parameters, such as the optimal manipulating position and angle for picking, transferring and releasing. The failure behaviors of pick-up are built to realize the efficient three-dimensional manipulation of microcopper wire of 300 μm. By establishing a theoretical model and experimental verification, it was concluded that the middle point was the best manipulating position when picking up the microcopper wire, the most efficient picking angle was between 45 and 60 degrees for the pipette, and the average time was 480 s in three sets of picking-release manipulation experiments. This paper provides an achievable idea for different types of micro-object manipulations and promotes the rapid application of micromanipulation techniques in MEMSs.

The effects of surface hydration on capillary adhesion under nanoscale confinement

Nanoscale phenomena such as surface hydration and the molecular layering of liquids under strong nanoscale confinement play a critical role in liquid-mediated surface adhesion that is not accounted for by available models, which assume a uniform liquid density with or without considering surface forces and associated disjoining pressure effects. This work introduces an alternative theoretical description that via the potential of mean force (PMF) considers the strong spatial variation of the liquid number density under nanoscale confinement. This alternative description based on the PMF predicts a dual effect of surface hydration by producing: (i) strong spatial oscillations of the local liquid density and pressure and, more importantly, (ii) a configuration-dependent liquid-solid surface energy under nanoscale confinement. Theoretical analysis and molecular dynamics simulations for the case of an axisymmetric water bridge with nanoscale heights show that the latter hydration effect is critical for the accurate prediction of the surface energy and adhesion forces when a small volume of liquid is nanoscopically confined by two surfaces approaching contact.

Directional passive transport of nanodroplets on general axisymmetric surfaces

Rapid removal of small-sized droplets passively using fixed structures is a key challenge for various applications including anti-icing, rapid cooling, and water harvesting. In this work, we investigate the directional motion of nanodroplets on axisymmetric surfaces with curvature gradient through molecular dynamics (MD) simulations. It is found that as the shape of the axisymmetric surface is changed from a dome to a trumpet, the droplet velocity is greatly enhanced, by a factor of ∼14. Such an increase is mainly caused by the increment in the driving force. The droplet velocity changes nonlinearly as the surface wettability is varied and assumes the maximum at the contact angle of ∼75°. We derive a formula for the driving force of nanodroplets on general axisymmetric surfaces by evaluating the pressure gradient inside the droplet induced by the curvature gradient. Molecular dynamics simulations are performed to directly measure the driving force and confirm that the theoretical formula works well. By illustrating the reduced initial velocity of droplets as a function of a dimensionless number, which represents the ratio of the driving force to the retentive force due to contact angle hysteresis, we show that the onset of droplet motion on axisymmetric surfaces occurs when the dimensionless number is above a critical value. The dimensionless number reveals the effects of surface geometry, surface wettability, and droplet size on the droplet motion.

Bamboo Weaving Inspired Design of a Carbonaceous Electrode with Exceptionally High Volumetric Capacity

A highly densified electrode material is desirable to achieve large volumetric capacity. However, pores acting as ion transport channels are critical for high utilization of active material. Achieving a balance between high volume density and pore utilization remains a challenge particularly for hollow materials. Herein, capillary force is employed to convert hollow fibers to a bamboo-weaving-like flexible electrode (BWFE), in which the shrinkage of hollow space results in high compactness of the electrode. The volume of the electrode can be decreased by 96% without sacrificing the gravimetric capacity. Importantly, the conductivity of BWFE after thermal treatment can reach up to 50,500 S/m which exceeds that for most other carbon materials. Detailed mechanical analysis reveals that, due to the strong interaction between nanoribbons, Young's modulus of the electrode increases by 105 times. After SnO₂ active materials is impregnated, the BWFE/SnO₂ electrode exhibits an exceptionally ultrahigh volumetric capacity of 2000 mAh/cm³.

Janus Membrane with a Dense Hydrophilic Surface Layer for Robust Fouling and Wetting Resistance in Membrane Distillation: New Insights into Wetting Resistance

Although membrane distillation (MD) has been identified as a promising technology to treat hypersaline wastewaters, its practical applications face two prominent challenges: membrane wetting and fouling. Herein, we report a facile and scalable approach for fabricating a Janus MD membrane comprising a dense polyvinyl alcohol (PVA) surface layer and a hydrophobic polyvinylidene fluoride (PVDF) membrane substrate. By testing the Janus membrane in direct contact MD experiments using feeds containing a sodium dodecyl sulfate (SDS) surfactant or/and mineral oil, we demonstrated that the dense Janus membrane can simultaneously resist wetting and fouling. This method represents the simplest approach to date for fabricating MD membranes with simultaneous wetting and fouling resistance. Importantly, we also unveil the mechanism of wetting resistance by measuring the breakthrough pressure and surfactant permeation (through the PVA layer) and found that wetting resistance imparted by a dense hydrophilic layer is attributable to capillary pressure. This new insight will potentially change the paradigm of fabricating wetting-resistant membranes and enable robust applications of MD and other membrane contactor processes facing challenges of pore wetting or/and membrane fouling.

Ultra-strong polymeric hollow fiber membranes for saline dewatering and desalination

Osmotically assisted reverse osmosis (OARO) has become an emerging membrane technology to tackle the limitations of a reverse osmosis (RO) process for water desalination. A strong membrane that can withstand a high hydraulic pressure is crucial for the OARO process. Here, we develop ultra-strong polymeric thin film composite (TFC) hollow fiber membranes with exceptionally high hydraulic burst pressures of up to 110 bar, while maintaining high pure water permeance of around 3 litre/(m² h bar) and a NaCl rejection of about 98%. The ultra-strong TFC hollow fiber membranes are achieved mainly by tuning the concentration of the host polymer in spinning dopes and engineering the fiber dimension and morphology. The optimal TFC membranes display promising water permeance under the OR and OARO operation modes. This work may shed new light on the fabrication of ultra-strong TFC hollow fiber membranes for water treatments and desalination.

Osmotically assisted reverse osmosis can overcome limitations of the reverse osmosis process but a strong membrane which can withstand a high hydraulic pressure is crucial. Here, the authors develop strong polymer thin film composite hollow fiber membranes with exceptionally high hydraulic burst pressures of up to 110 bar, while maintaining high water permeance and salt rejection.

Face-to-Face Growth of Wafer-Scale 2D Semiconducting MOF Films on Dielectric Substrates

The preparation of large-area 2D conductive metal-organic framework (MOF) films remains highly desirable but challenging. Here, inspired by the capillary phenomenon, a face-to-face confinement growth method to grow conductive 2D Cu₂ (TCPP) (TCPP = meso-tetra(4-carboxyphenyl)porphine) MOF films on dielectric substrates is developed. Trace amounts of solutions containing low-concentration Cu²⁺ and TCPP are pumped cyclically into a micropore interface to produce this growth. The crystal structures are confirmed with various characterization techniques, which include high-resolution atomic force microscopy and cryogenic transmission electron microscopy (Cryo-TEM). The Cu₂ (TCPP) MOF film exhibit an electrical conductivity of ≈0.007 S cm^-1 , which is approximately four orders of magnitude higher than other carboxylic-acid-based MOF materials (10^-6 S cm^-1 ). Other wafer-scale conductive MOF films such as M₃ (HHTP)₂ (M = Cu, Co, and Ni; HHTP = 2,3,6,7,10,11-triphenylenehexol) can be produced utilizing this strategy and suggests this method has widescale applicability potential.

Molecular Dynamics Simulations of Lubricant Recycling in Porous Polyimide Retainers of Bearing

Porous polyimide (PI) materials are one of important bearing retainer materials in space applications due to the storage and continuous supply of a lubricant through the porous structure. Understanding the lubricant recycling process in porous polyimide retainers is of vital importance to improve lubricant supply performance of bearing. In this work, through molecular dynamic simulations, coarse-grained models are built to study lubricant recycling processes on porous and solid surfaces. A spontaneous imbibition behavior is observed when the lubricant is present on the porous surface. The dynamic change in the contact angle in this process and the deviation of the effective radius from the volumetric radius because of the molecular structure of polyimide causes the classical Lucas-Washburn (L-W) equation fail to describe the process. By fitting dynamic contact angle and effective radius, a modified L-W equation is developed, which well predicts the process of imbibition. Furthermore, it is found that the lubricants between the porous polyimide surface and the solid surface are recycled by extrusion, and spontaneous imbibition does not occur. In this case, the accumulation of lubricant pressure and weak interfacial interaction between the lubricant and the solid surface are also the main factors that promote lubricant recycling.

A natural polymer-based porous sponge with capillary-mimicking microchannels for rapid hemostasis

Natural polymer materials have attracted great attention in the field of hemostasis because of their wide range of source, nontoxicity, hydrophilicity, and air permeability. In the present study, two natural polymers composed of carboxymethyl chitosan (CMCS) and sodium carboxymethylcellulose (CMCNa) plus γ-(2,3-epoxypropoxy) propytrimethoxysilane (KH560) that serves as a crosslinking agent were selected to synthesize a capillary-mimicking composite hemostatic (CCK) sponge with a low density, interconnected microchannel architecture, suitable mechanical strength, high resilience, and ultrastrong liquid absorption capacity. The introduction of a large number of hydrophilic carboxymethyl functional groups and the design of capillary-mimicking structures formed by the ice segregation-induced self-assembly (ISISA) process endowed the CCK sponges with an ultrastrong liquid absorption capacity, which significantly enhanced the hemostatic ability of the materials. Both in vivo and in vitro hemostatic experiments confirmed the potential of the CCK sponges to achieve rapid hemostasis. Additionally, cytotoxicity and hemolysis assays showed that the CCK sponges exhibited good biocompatibility and hemocompatibility. The possible hemostatic mechanism was also discussed in this study. In conclusion, the capillary-mimicking hemostatic sponge exhibits a high potential to induce rapid hemostasis in prehospital emergency and clinical settings. STATEMENT OF SIGNIFICANCE: In the present study, an oriented composite hemostatic (CCK) sponge with a capillary-mimicking structure formed by the ice segregation-induced self-assembly (ISISA) process was designed and used to achieve rapid hemostasis. The unique aligned microchannel structure of the sponge exhibited an ultrastrong capillary-mimicking action and endowed the prepared CCK hemostatic sponge with a strong liquid absorption capacity. By changing the proportion of raw materials, we could modify the unique capillary-mimicking structure with aligned microchannels. Two natural polymer-based materials with abundant hydrophilic groups were chosen to prepare the CCK sponge to fully utilize the characteristics of this structure. The oriented natural polymer-based porous sponge with capillary-mimicking microchannels exhibited a strong hemostatic ability in both in vivo and in vitro tests. The results showed that the CCK sponge with the capillary-mimicking structure has a high potential to achieve rapid hemostasis.

A fluorous biphase drug delivery system triggered by low frequency ultrasound: controlled release from perfluorous discoidal porous silicon particles

Conventional drug delivery systems face unsatisfactory loading efficiency, poor biological bypass, and uncontrollable release, which are great barriers for improving the treatment of many diseases. Herein, a proof-of-concept of a fluorous biphase drug delivery system (FB-DDS) trigged by low frequency ultrasound (LFUS) is proposed for the first time, where promoted incorporation and stabilization of therapeutic agents in nanocarriers was achieved through fluorine-fluorine interactions, and the encapsulated drugs were controllably released by external sources, resulting in minimized nonspecific toxicity and enhanced therapeutic efficacy. The FB-DDS was constructed from monodisperse, discoidal porous silicon particles (PSP) and was functionalized with 1H,1H,2H,2H-perfluorodecyltrimethoxysilane (FAS17) for loading perfluoropentane (PFP) and fluorinated drugs through fluorine-fluorine interactions. This delivery system was demonstrated by utilizing model compounds including a fluorous-tagged fluorescein and a fluorine containing antibiotic ciprofloxacin. Loading of the model molecules into fluorocarbon-coated carriers was facilitated by fluorous interactions, whereas ejection of the model molecules was promoted by applying LFUS to rapidly evaporate PFP. In the in vitro test, these carriers loaded with fluorine containing ciprofloxacin exhibited excellent antimicrobial activity against Pseudomonas aeruginosa biofilm formation. Overall, this innovative stimulus-responsive fluorous biphase drug delivery system will be a promising candidate for practical applications as well as encouraging further investigation of drug delivery and controlled release strategies.

Suppressing the Ring Stain Effect with Superhydrophilic/Superhydrophobic Patterned Surfaces

The ring stain phenomenon is a critical hindrance to the distribution of the solute during drying for biochemical assays and materials deposition. Herein, we developed a substrate, characterized with hydrophilic spots surrounded by hydrophobic areas, to suppress the ring stain effect, and fabricated four kinds of patterned surfaces to investigate the relationship between the surface free energy and ring-suppressing performance. We found that during the evaporation process, a drop was constrained on the hydrophilic spot with a pinned contact line, and the ring stain effect was suppressed significantly. The suppressing performance of the ring stain effect increases with surface free energy differences between the hydrophilic and hydrophobic regions.

Wetting and recovery of nano-patterned surfaces beyond the classical picture

Hydrophobic (nano)textured surfaces, also known as superhydrophobic surfaces, have a wide range of technological applications, including in the self-cleaning, anti-moisture, anti-icing, anti-fogging and friction/drag reduction fields, and many more. The accidental complete wetting of surface textures, which destroys superhydrophobicity, and the opposite process of recovery are two crucial processes that can prevent or enable the technological applications mentioned before. Understanding these processes is key to designing surfaces with tailored wetting and recovery properties. However, recent experiments have suggested that the currently available theories are insufficient for describing the observed phenomena. In this work we offer a dynamic picture of these processes beyond the state of the art showing that the key ingredient determining the experimental behavior is the inertia of the liquid in the wetting and dewetting processes, which is neglected in microscopic and macroscopic quasi-static theories inspired by the classical nucleation theory. The present findings are also important for other related phenomena, such as heterogeneous cavitation, where vapor/gas bubbles form at surface asperities, condensation, dynamics of the triple line, micelle formation, etc.

Corncoblike, Superhydrophobic, and Phase-Changeable Nanofibers for Intelligent Thermoregulating and Water-Repellent Fabrics

The comfort and protection of clothes are critically important for human well-being in life; however, constructing multifunctional fabrics with excellent thermoregulating and water-repellent performance still presents an exciting scientific challenge and a significant technological advancement. Therefore, we report a novel and straightforward methodology to fabricate corncoblike and phase-changeable nanofibers by incorporating n-octadecane phase change capsules (PCCs) for creating water-repellent and thermoregulating nanofibrous membranes. This strategy causes PCC to be uniformly distributed on the nanofibers to form a unique corncoblike structure, preventing the abscission of PCC and the leakage of the phase change ingredient (n-octadecane). Besides, the resultant nanofibrous membranes are endowed with hierarchical roughness, small pore size, and energy storage/release capacity in response to environmental changes. As a consequence, the nanofibrous membranes present prominent water repellence with superhydrophobicity (a water contact angle of 153°) and a high hydrostatic pressure of 84 kPa, robust mechanical properties with a tensile strength of 9.2 MPa, as well as excellent hybrid active-passive thermal regulation with a water vapor transmittance rate of 11.4 kg m^-2 d^-1 and a high phase change enthalpy of 74 J g^-1 after 50 heating/cooling cycles, indicating them to be an exceptional candidate for personal protection and thermal management.