Chemically crosslinked liquid crystalline poly(ionic liquid)s/halloysite nanotubes nanocomposite ionogels with superior ionic conductivity, high anisotropic conductivity and a high modulus

Highly Ionic Conductive, Stretchable, and Tough Ionogel for Flexible Solid-State Supercapacitor

The increasing demand for wearable electronics calls for advanced energy storage solutions that integrate high  electrochemical performances and mechanical robustness. Ionogel is a promising candidate due to its stretchability combined with high ionic conductivity. However, simultaneously optimizing both the electrochemical and mechanical performance of ionogels remains a challenge. This paper reports a tough and highly ion-conductive ionogel through ion impregnation and solvent exchange. The fabricated ionogel consists of double interpenetrating networks of long polymer chains that provide high stretchability. The polymer chains are crosslinked by hydrogen bonds that induce large energy dissipation for enhanced toughness. The resultant ionogel possesses mechanical stretchability of 26, tensile strength of 1.34 MPa, and fracture toughness of 4175 J m-2. Meanwhile, due to the high ion concentrations and ion mobility in the gel, a high ionic conductivity of 3.18 S m-1 at room temperature is achieved. A supercapacitor of this ionogel sandwiched with porous fiber electrodes provides remarkable areal capacitance (615 mF cm-2 at 1 mA cm-2), energy density (341.7 µWh cm-2 at 1 mA cm-2), and power density (20 mW cm-2 at 10 mA cm-2), offering significant advantages in applications where high efficiency, compact size, and rapid energy delivery are crucial, such as flexible and wearable electronics.

Strain-Induced Phase Separation and Mechanomodulation of Ionic Conduction in Anisotropic Nanocomposite Ionogels

Ionogels have great potential for the development of tissue-like, soft, and stretchable ionotronics. However, conventional isotropic ionogels suffer from poor mechanical properties, low efficient force transmission, and tardy mechanoelectric response, hindering their practical utility. Here, we propose a simple one-step method to fabricate bioinspired anisotropic nanocomposite ionogels based on a combination of strain-induced phase separation and mechanomodulation of ionic conduction in the presence of attapulgite nanorods. These ionogels show high stretchability (747.1% strain), tensile strength (6.42 MPa), Young's modulus (83.49 MPa), and toughness (18.08 MJ/m3). Importantly, the liquid crystalline domain alignment-induced microphase separation and ionic conductivity enhancement during stretching endow these ionogels with an unusual mechanoelectric response and dual-programmable shape-memory properties. Moreover, the anisotropic structure, good elasticity, and unique resistance-strain responsiveness give the ionogel-based strain sensors high sensitivity, rapid response time, excellent fatigue resistance, and unique waveform-discernible strain sensing, which can be applied to real-time monitoring of human motions. The findings offer a promising way to develop bioinspired anisotropic ionogels to modulate the microstructure and properties for practical applications in advanced ionotronics.

Recent Advances in Porous Carbon Materials as Electrodes for Supercapacitors

Porous carbon materials have demonstrated exceptional performance in various energy and environment-related applications. Recently, research on supercapacitors has been steadily increasing, and porous carbon materials have emerged as the most significant electrode material for supercapacitors. Nonetheless, the high cost and potential for environmental pollution associated with the preparation process of porous carbon materials remain significant issues. This paper presents an overview of common methods for preparing porous carbon materials, including the carbon-activation method, hard-templating method, soft-templating method, sacrificial-templating method, and self-templating method. Additionally, we also review several emerging methods for the preparation of porous carbon materials, such as copolymer pyrolysis, carbohydrate self-activation, and laser scribing. We then categorise porous carbons based on their pore sizes and the presence or absence of heteroatom doping. Finally, we provide an overview of recent applications of porous carbon materials as electrodes for supercapacitors.

A novel bilayer heterogeneous poly(ionic liquid) electrolyte for high-performance flexible supercapacitors with ultraslow self-discharge

Flexible supercapacitors with high power density and long cyclic stability represent a promising candidate to be used as power supplies for portable electronics, but often suffer from the disadvantages of a limited working voltage and rapid self-discharge (spontaneous drop of open-circuit voltage). Here, we design a bilayer heterogeneous poly(ionic liquid) electrolyte (BHPE) consisting of a polycation complex and a polyanion complex with different zeta potentials to suppress the self-discharge of flexible symmetric supercapacitors. The resultant BHPE-based supercapacitors using active carbon/carbon nanotube composite electrodes exhibit a high working potential of 3.0 V and an energy density of 33 W h kg^-1, which are comparable with those of devices obtained by using a homogeneous poly(ionic liquid) electrolyte (HPE). More significantly, the developed BHPE-based supercapacitor charged under forward bias exhibits a self-discharge time of 23.2 h, which is at least twice that of the device charged under reverse bias and is also much superior to those of HPE-based supercapacitors. The BHPE-based supercapacitors also possess excellent mechanical flexibility and stability, due to the stabilized interface contact between two layers of poly(ionic liquid)s.

Ionogels: recent advances in design, material properties and emerging biomedical applications

Ionic liquid (IL)-based gels (ionogels) have received considerable attention due to their unique advantages in ionic conductivity and their biphasic liquid-solid phase property. In ionogels, the negligibly volatile ionic liquid is retained in the interconnected 3D pore structure. On the basis of these physical features as well as the chemical properties of well-chosen ILs, there is emerging interest in the anti-bacterial and biocompatibility aspects. In this review, the recent achievements of ionogels for biomedical applications are summarized and discussed. Following a brief introduction of the various types of ILs and their key physicochemical and biological properties, the design strategies and fabrication methods of ionogels are presented by means of different confining networks. These sophisticated ionogels with diverse functions, aimed at biomedical applications, are further classified into several active domains, including wearable strain sensors, therapeutic delivery systems, wound healing and biochemical detections. Finally, the challenges and possible strategies for the design of future ionogels by integrating materials science with a biological interface are proposed.

Functionalized Halloysite Scaffold Controls Sodium Dendrite Growth

Sodium metal is one of the most promising anodes for the prospective low-cost rechargeable batteries. Nevertheless, the commercialization of Na metal anodes remains restricted by sodium dendrite growth. Herein, halloysite nanotubes (HNTs) were chosen as the insulated scaffolds, and Ag nanoparticles were introduced as sodiophilic sites to achieve uniform sodium deposition from bottom to top under the synergistic effect. Density functional theory (DFT) calculation results demonstrated that the presence of Ag greatly increased the binding energy of sodium on HNTs/Ag (-2.85 eV) vs HNTs (-0.85 eV). Meanwhile, thanks to the opposite charges on the inner and outer surfaces of HNTs, faster Na⁺ transfer kinetics and selective adsorption of SO₃CF₃^- on the inner surface of HNTs were achieved, thus avoiding the formation of space charge. Accordingly, the coordination between HNTs and Ag afforded a high Coulombic efficiency (about 99.6% at 2 mA cm^-2), long lifespan in a symmetric battery (for over 3500 h at 1 mA cm^-2), and remarkable cycle stability in Na metal full batteries. This work offers a novel strategy to design a sodiophilic scaffold by nanoclay for dendrite-free Na metal anodes.

Superior, Environmentally Tolerant, Flexible, and Adhesive Poly(ionic liquid) Gel as a Multifaceted Underwater Sensor

In recent years, gel-based sensors have been widely considered and fully developed. However, it is of vital importance, yet rather challenging to achieve a multifaceted gel, which can unify the advantages of favorable conductivity, high adhesion, excellent environmental resistance, and so forth and be applied in various harsh conditions. Herein, an ideal, extremely stable, adhesive, conductive poly(ionic liquid) gel (PILG) was designed via a one-step photoinitiated radical polymerization based on 1-vinyl-3-butylimidazolium bis(trifluoromethylsulfonyl)imide (VBIm-NTf₂) cross-linked with ethylene glycol dimethacrylate (EGDMA) in methyltributylammonium bis(trifluoromethanesulfonyl)imide (N₁₄₄₄-NTf₂) medium. There are abundant hydrophobic butyl chains and fluorinated groups in VBIm-NTf₂ and N₁₄₄₄-NTf₂, which can impart the PILG with stable conductivity, excellent environmental tolerance, and adhesion even in water due to the ion-dipole and ion-ion interactions. The resulting PILG can be assembled as a soft and smart sensor that can be applied in specific conditions such as underwater or undersea and even in dynamic water, achieving a stable signal transmission. Meanwhile, the PILG can be utilized as a flexible electrode to convey ECG signals in air or water whether it is in the static or dynamic state. Therefore, it is envisioned that this novel PILG will serve as a hopeful electrical device for signal detection and healthy management in specific environments.

Facile synthesis of a novel BaSnO3/MXene nanocomposite by electrostatic self-assembly for efficient photodegradation of 4-nitrophenol

Photocatalysis is regarded as one of the most effective strategies for the removal of the toxic organic pollutants from aqueous solutions. However, a lack of the efficient photocatalysts prevents the widespread practical application. Herein, the electrostatic self-assembly method has been designed for facile synthesis of a novel BaSnO₃/PDDA/MXene (BSO/P/MX) nanocomposite as high efficient photocatalyst. In this nanocomposite, the BaSnO₃ (BSO), poly (dimethyl-diallylammonium chloride) (PDDA) and MXene (Ti₃C₂T_x) act as the active species, structure stabilizer and efficient electron transfer medium, respectively. Due to the strong synergy of the nanocomposite, the electron-transferring ability as well as the charge separation efficiency is boosted and thus high catalytic activity achieves towards the photodegradation of 4-nitrophenol. The superior degradation rate of 98.8% and a rate constant K of 0.09113 min^-1 have been realized within 75 min of ultraviolet (UV) light irradiation over the BSO/P/MX-8% catalyst. This as-prepared nanocomposite with the excellent catalytic activity can be employed as a promising photocatalyst for treating the organic pollutants from aqueous solutions.

Ultrastretchable, Adhesive, Fast Self-Healable, and Three-Dimensional Printable Photoluminescent Ionic Skin Based on Hybrid Network Ionogels

Developing multifunctional stretchable ionic skin (I-Skin) to mimic the sensations of the human skin is of great interest and shows promising potential in wearable sensors and human-machine interfaces (HMIs). However, common ionogels prepared with small-molecule cross-linkers and single networks can hardly satisfy the requirements of adjustable mechanical properties, strong adhesion, fast self-healability, and good stability in extreme environments. Herein, an ultrastretchable (>10,000%), ultrastrong adhesive (>6.8 MPa), ultrafast self-healable (10 s), high thermally stable (-60 to 250 °C), and three-dimensional (3D)-printable photoluminescent ionogel with shape memory properties has been designed. The ionogel consists of hyperbranched polymer covalent-cross-linked poly(zwitterionic ionic liquid)-co-poly(acrylic acid) and multiple dynamic bonding cross-linked networks. The excellent performance of the ionogel-based high-stretchable strain sensor and the triboelectric nanogenerator (TENG)-based self-powered touch sensor is further demonstrated over a wide temperature range (-40 to 150 °C). More importantly, ionogel-based I-Skin can work as an HMI for human gesture recognition and real-time wireless control of robots under extreme vacuum conditions and can also self-heal immediately along with function recovery after mechanical damage.

Tailoring intermolecular interactions in ion gels with rationally designed phosphonic acid polymers

Design strategies of phosphonic acid polymers established advanced ion gels with high ionic conductivity, mechanical strength, and self-healing ability via a configurable balance of ionic and hydrogen bonding interactions at the molecular level.

Aggregation of Halloysite Nanotubes in the Presence of Multivalent Ions and Ionic Liquids

Colloidal stability was investigated in two types of particle systems, namely, with bare (h-HNT) and polyimidazolium-functionalized (h-HNT-IP-2) alkali-treated halloysite nanotubes in solutions of metal salts and ionic liquids (ILs). The valence of the metal ions and the number of carbon atoms in the hydrocarbon chain of the IL cations (1-methylimidazolium (MIM+), 1-ethyl-3-methylimidazolium (EMIM+), 1-butyl-3-methylimidazolium (BMIM+), and 1-hexyl-3-methylimidazolium (HMIM+)) were altered in the measurements. For the bare h-HNT with a negative surface charge, multivalent counterions destabilized the dispersions at low values of critical coagulation concentration (CCC) in line with the Schulze-Hardy rule. In the presence of ILs, significant adsorption of HMIM+ took place on the h-HNT surface, leading to charge neutralization and overcharging at appropriate concentrations. A weaker affinity was observed for MIM+, EMIM+, and BMIM+, while they adsorbed on the particles to different extents. The order HMIM+ < BMIM+ < EMIM+ < MIM+ was obtained for the CCCs of h-HNT, indicating that HMIM+ was the most effective in the destabilization of the colloids. For h-HNT-IP-2 with a positive surface charge, no specific interaction was observed between the salt and the IL constituent cations and the particles, i.e., the determined charge and aggregation parameters were the same within experimental error, irrespective of the type of co-ions. These results clearly indicate the relevance of ion adsorption in the colloidal stability of the nanotubes and thus provide useful information for further design of processable h-HNT dispersions.

2D Silicate Materials for Composite Polymer Electrolytes

Two-dimensional (2D) silicate materials have become one of the promising candidates for constructing composite polymer electrolytes due to their advantages of low cost, high stability, good mechanical property, high ionic conductivity and potential to inhibit the growth of lithium dendrites. However, the application of 2D silicate materials in composite polymer electrolytes (CPEs) is still at the infancy stage and facing a lot of challenges. In this minireview, we summarize the structures and properties of 2D silicate materials that have been applied in CPEs, the processing methods of composite electrolytes based on 2D silicates, and the recent process of 2D silicate materials in CPEs. We hope this review could present a general overview of the 2D silicates for CPEs and promote the further study for potential applications.

Highly Transparent, Stretchable, and Conductive Supramolecular Ionogels Integrated with Three-Dimensional Printable, Adhesive, Healable, and Recyclable Character

In this work, we report the easy fabrication of highly transparent (optical transmittance above 93%), stretchable (1500-2500% elongation at break), and conductive (up to 2.25 S m^-1 at 25 °C) supramolecular ionogels that simultaneously integrate with three-dimensional (3D) printable, healable, adhesive, and recyclable character. The supramolecular ionogel is designed using a linear amphiphilic poly(urethane-urea) (PUU) copolymer and ionic liquid (IL) as the elastic scaffold and electrolyte, respectively, via a simple cosolvent method. Intriguingly, the 3D-printed highly conductive (2.25 S m^-1 at 25 °C) supramolecular ionogel structure shows record-high mechanical performance with a breaking tensile strain and stress of 945% and 1.51 MPa, respectively, and is able to lift 3400× or bear 10000× its weight without fracture. Furthermore, both the solution casting and 3D-printed ionogel films show high sensitivity and reliability for sensing a wide range of strains, including various human motions. The results present some new insights into the structural, mechanical, and functional design of novel multifunctional ionogels with distinguished mechanical performance and tractable processability, which will extend them to a wide range of flexible electronic applications, including artificial intelligence, wearable/conformable electronics, human/machine interactions, soft robotics, etc.

Natural Clay-Based Materials for Energy Storage and Conversion Applications

Among various energy storage and conversion materials, functionalized natural clays display significant potentials as electrodes, electrolytes, separators, and nanofillers in energy storage and conversion devices. Natural clays have porous structures, tunable specific surface areas, remarkable thermal and mechanical stabilities, abundant reserves, and cost-effectiveness. In addition, natural clays deliver the advantages of high ionic conductivity and hydrophilicity, which are beneficial properties for solid-state electrolytes. This review article provides an overview toward the recent advancements in natural clay-based energy materials. First, it comprehensively summarizes the structure, classification, and chemical modification methods of natural clays to make them suitable in energy storage and conversion devices. Then, the particular attention is focused on the application of clays in the fields of lithium-ion batteries, lithium-sulfur batteries, zinc-ion batteries, chloride-ion batteries, supercapacitors, solar cells, and fuel cells. Finally, the possible future research directions are provided for natural clays as energy materials. This review aims at facilitating the rapid developments of natural clay-based energy materials through a fruitful discussion from inorganic and materials chemistry aspects, and also promotes the broad sphere of clay-based materials for other utilization, such as effluent treatment, heavy metal removal, and environmental remediation.

Semi-interpenetrating chitosan/ionic liquid polymer networks as electro-responsive biomaterials for potential wound dressings and iontophoretic applications

In this work, electro-responsive chitosan/ionic liquid-based hydrogels were synthetized for the first time, envisaging the development of iontophoretic biomaterials for the controlled release/permeation of charged biomolecules. The main goal was to enhance and tune the physicochemical, mechanical, electro-responsive, and haemostatic properties of chitosan-based biomaterials to obtain multi-stimuli responsive (responsive to electrical current, ionic strength, and pH) and mechanically stable hydrogels. To accomplish this objective, polycationic semi-interpenetrating copolymer networks (semi-IPN) were prepared by combining chitosan (CS) and ionic liquid-based polymers and copolymers, namely poly(1-butyl-3-vinylimidazolium chloride) (poly(BVImCl)) and poly(2-hydroxymethyl methacrylate-co-1-butyl-3-vinylimidazolium chloride) (poly(HEMA-co-BVImCl)). Results show that prepared semi-IPNs presented high mechanical stability and were positively charged over a broad pH range, including basic pH. Semi-IPNs also presented faster permeation and release rates of lidocaine hydrochloride (LH), under external electrical stimulus (0.56 mA/cm²) in aqueous media at 32 °C. The kinetic release constants and the LH diffusion coefficients measured under electrical stimulus were ~1.5 and > 2.7 times higher for those measured for passive release. Finally, both semi-IPNs were non-haemolytic (haemolytic index ≤0.2%) and showed strong haemostatic activity (blood clotting index of ~12 ± 1%). Altogether, these results show that the prepared polycationic semi-IPN hydrogels presented advantageous mechanical, responsive and biological properties that enable them to be potentially employed for the design of new, safer, and advanced stimuli-responsive biomaterials for several biomedical applications such as haemostatic and wound healing dressings and iontophoretic patches.

Roadmap on Ionic Liquid Electrolytes for Energy Storage Devices

Ionic liquids are considered to be promising electrolyte solvents or additives for rechargeable batteries (i. e., lithium-ion batteries, sodium-ion batteries, lithium-sulfur batteries, aluminum-ion batteries, etc.) and supercapacitors. This is related with the superior physical and electrochemical properties of ionic liquids, which can influence the performance of rechargeable batteries. Therefore, it is necessary to write a roadmap on ionic liquids for rechargeable batteries. In this roadmap, some progress, critical techniques, opportunities and challenges of ionic liquid electrolytes for various batteries and supercapacitors are pointed out. Especially, properties and roles of ionic liquids should be considered in energy storage. Ionic liquids can be used as electrolyte salts, electrolyte additives, and solvents. For optimizing ionic liquid-based electrolytes for energy storage, their applications in various energy storage devices should be considered by combing native chemical/physical properties and their roles. We expect that this roadmap will give a useful guidance in directing future research in ionic liquid electrolytes for rechargeable batteries and supercapacitors.

3D Printable, Highly Stretchable, Superior Stable Ionogels Based on Poly(ionic liquid) with Hyperbranched Polymers as Macro-cross-linkers for High-Performance Strain Sensors

Stretchable ionogels have recently emerged as promising soft and safe ionic conductive materials for use in wearable and stretchable electrochemical devices. However, the complex preparation process and insufficient thermomechanical stability greatly limit the precise rapid fabrication and application of stretchable ionogels. Here, we report an in situ 3D printing method for fabricating high-performance single network chemical ionogels as advanced strain sensors. The ionogels consist of a special cross-linking network constructed by poly(ionic liquid) and hyperbranched polymer (macro-cross-linkers) that exhibits high stretchability (>1000%), superior room-temperature ionic conductivity (up to 5.8 mS/cm), and excellent thermomechanical stability (-75 to 250 °C). The strain sensors based on ionogels have a low response time (200 ms), high sensitivity with temperature independence, long-term durability (2000 cycles), and excellent temperature tolerance (-60 to 250 °C) and can be used as human motion sensors. This work provides a new strategy to design highly stretchable and superior stable electronic devices.

Gelation, Liquid Crystalline Behavior, and Ionic Conductivity of Nanocomposite Ionogel Electrolytes Based On Attapulgite Nanorods

Anisotropic nanoparticles and their dispersions have attracted much attention because of their distinguished characteristics and promising applications. In this study, the novel liquid crystalline nanocomposite ionogel electrolyte materials based on anisotropic nanoparticles of attapulgite (ATP) have been prepared. The gelation, liquid crystalline (LC) behavior, thermal stability, and ionic conductivity were systematically investigated. Rheological, polarized optical microscopy (POM), and small-angle X-ray scattering (SAXS) measurements demonstrated that these liquid crystalline ionogels showed a two-step mechanism consisting of gelation and subsequent reorganization of the gel. Interestingly, the obtained ionogel electrolytes were very stable and LC gel structures were not destroyed even though the temperature was as high as 200 °C. Furthermore, these ionogels possessed outstanding thermal stability and the decomposition temperature exceeded 400 °C. Remarkably, the LC nanocomposite ionogel electrolytes exhibited high room temperature ionic conductivity and the value still exceeded 1.0 × 10^-3 S/cm even when the ATP concentration up to 30 wt %. These novel findings are very useful for the fabrication of high temperature resistant electrochemical devices and liquid crystalline nanocomposite materials.