Palladium-Catalyzed, Site-Selective C(sp2)8-H Halogenation and Nitration of 4-Quinolone Derivatives

Selective installation of halo and nitro groups in heterocyclic backbone through a transition-metal-catalyzed C-H bond activation strategy is immensely alluring to access high-value scaffolds. Here in, we disclosed N-pyrimidyl-directed assisted palladium(II)-catalyzed C(sp2)8-H halogenation and nitration of substituted 4-quinolone derivatives in the presence of N-halosuccinimide and tert-butyl nitrite, respectively, offering structurally diversified 8-halo/nitro-embedded 4-quinolone frameworks in high yields. Mechanistic studies indicated that the reaction follows an organometallic pathway with a reversible C-H metalation step. This operationally simple protocol is scalable with a broad substrate scope and excellent functional group compatibility. Moreover, the postdiversifications of the synthesized derivatives are also showcased to ensure the synthetic versatility of the methodology.

Chemo-and regioselective aqueous phase, co-acid free nitration of aromatics using traditional and nontraditional activation methods

Electrophilic aromatic nitrations are used for the preparation of a variety of synthetic products including dyes, agrochemicals, high energy materials, fine chemicals and pharmaceuticals. Traditional nitration methods use highly acidic and corrosive mixed acid systems which present a number of drawbacks. Aside from being hazardous and waste-producing, these methods also often result in poor yields, mostly due to low regioselectivity, and limited functional group tolerance. As a consequence, there is a need for effective and environmentally benign methods for electrophilic aromatic nitrations. In this work, the major aim was to develop reaction protocols that are more environmentally benign while also considering safety issues. The reactions were carried out in dilute aqueous nitric acid, and a broad range of experimental variables, such as acid concentration, temperature, time, and activation method, were investigated. Mesitylene and m-xylene were used as test substrates for the optimization. While the optimized reactions generally occurred at room temperature without any activation under additional solvent-free conditions, slight adjustments in acid concentration, stoichiometric equivalents, and volume were necessary for certain substrates, in addition to the activation. The substrate scope of the process was also investigated using both activated and deactivated aromatics. The concentration of the acid was lowered when possible to improve upon the safety of the process and avoid over-nitration. With some substrates we compared traditional and nontraditional activation methods such as ultrasonic irradiation, microwave and high pressure, respectively, to achieve satisfactory yields and improve upon the greenness of the reaction while maintaining short reaction times.

Late-Stage C-H Nitration of Unactivated Arenes by Fe(NO3)3·9H2O in Hexafluoroisopropanol

Operationally simple and generally applicable arene nitration with cheap and easily accessible chemicals has been a long-sought transformation in the synthetic organic community. In this work, we realized this goal with nontoxic and inexpensive Fe(NO3)3·9H2O as the nitro source and easily recyclable solvent hexafluoroisopropanol as the promotor via a network of hydrogen-bonding interactions. As a result of the relative mildness and high reliability of this protocol, late-stage nitration of various highly functionalized natural products and commercially available drugs was realized.

Silver-catalyzed nitrosation and nitration of aromatic amides using NOBF4

Divergent aromatic ring nitrosation and nitration of aromatic amides are reported using NOBF4 as the electrophile under silver-catalyzed conditions. The reactions proceed efficiently with a wide range of compatible functionalities providing ortho-position nitrosation products, deacylation nitrosation products, and nitration products from different tertiary and secondary aromatic amides.

Catalytic ipso-Nitration of Organosilanes Enabled by Electrophilic N-Nitrosaccharin Reagent

Nitroaromatic compounds represent one of the essential classes of molecules that are widely used as feedstock for the synthesis of intermediates, the preparation of nitro-derived pharmaceuticals, agrochemicals, and materials on both laboratory and industrial scales. We herein disclose the efficient, mild, and catalytic ipso-nitration of organotrimethylsilanes, enabled by an electrophilic N-nitrosaccharin reagent and allows chemoselective nitration under mild reaction conditions, while exhibiting remarkable substrate generality and functional group compatibility. Additionally, the reaction conditions proved to be orthogonal to other common functionalities, allowing programming of molecular complexity via successive transformations or late-stage nitration. Detailed mechanistic investigation by experimental and computational approaches strongly supported a classical electrophilic aromatic substitution (SE Ar) mechanism, which was found to proceed through a highly ordered transition state.

Regioselective synthesis of 3-nitroindoles under non-acidic and non-metallic conditions

An electrophilic substitution reaction, without acid and metal, of indole with ammonium tetramethylnitrate for accessing 3-nitroindole has been developed. In this protocol, trifluoroacetyl nitrate (CF3COONO2) was produced by metathesis of ammonium tetramethyl nitrate and trifluoroacetic anhydride at sub-room temperature. Trifluoroacetyl nitrate (CF3COONO2) is an electrophilic nitrating agent for a variety of indoles, aromatic and heterocyclic aromaticity. Meanwhile, this strategy could be applied to construct the skeleton structure of many kinds of bioactive molecules. Interestingly, 3-nitroindole can be further derivatived as a pyrrolo[2,3-b]indole.

Characterization and Reactivity of Copper(II) and Copper(III) σ-Aryl Intermediates in Aminoquinoline-Directed C-H Functionalization

Over the past decade, numerous reports have focused on the development and applications of Cu-mediated C-H functionalization reactions; however, to date, little is known about the Cu intermediates involved in these transformations. This paper details the observation and characterization of CuII and CuIII intermediates in aminoquinoline-directed C(sp2)-H functionalization of a fluoroarene substrate. An initial C(sp2)-H activation at CuII occurs at room temperature to afford an isolable anionic cyclometalated CuII complex. This complex undergoes single-electron oxidation with ferrocenium or AgI salts under mild conditions (5 min at room temperature) to afford C(sp2)-C(sp2) or C(sp2)-NO2 coupling products. Spectroscopic studies implicate the formation of a transient diamagnetic CuIII-σ-aryl intermediate that undergoes either (i) a second C(sp2)-H activation at CuIII followed by C-C bond-forming reductive elimination or (ii) reaction with a NO2- nucleophile and C(sp2)-NO2 coupling.

Trifluoromethanesulfonic Acid Promoted Controllable Electrophilic Aromatic Nitration

In this work, we developed a facile and controllable electrophilic aromatic nitration method with commercially available 68% HNO₃ as the nitrating reagent and trifluoromethanesulfonic acid (HOTf) as the catalyst in hexafluoroisopropanol or under solvent-free conditions. The electrophilic nitration products of different arenes can be obtained in almost quantitative yields by tuning the loading of HOTf. The strong acidity and water absorbing property of HOTf allowed this transformation to reach completion in a short time at room temperature.

Dinitro-5,5-Dimethylhydantoin: An Arene Nitration Reagent

The development of a new N-nitro type compound, dinitro-5,5-dimethylhydantoin (DNDMH), has been reported as an arene nitration reagent. The exploration demonstrated that arene nitration with DNDMH exhibited good tolerance with diverse functional groups. It is notable that, among the two N-nitro units of DNDMH, only the N-nitro unit on N1 was delivered to the nitroarene products. The N-nitro type compound with a single N-nitro unit on N2 cannot promote the arene nitration.

Nitration of Pyrrolo[2,1-a]isoquinolines

We have successfully modified a series of pyrrolo[2,1-a]isoquinolines via direct nitration under mild reaction conditions. Easily accessible nitrates including CAN, Cu(NO₃)₂·H₂O, and Fe(NO₃)₃·9H₂O all can serve as effective nitrating reagents for functionalizing pyrrolo[2,1-a]isoquinolines. Various nitro-bearing pyrrolo[2,1-a]isoquinolines have been efficiently prepared in acceptable to good yields.

NHC-catalyzed [3 + 3] cycloaddition of α-bromoenals with nitroketene aminals or nitroketene N,S-acetals: synthesis of nitro-containing dihydropyridin-2-ones

An N-heterocyclic carbene (NHC)-catalyzed [3 + 3] cycloaddition of α-bromoenals with nitroketene aminals or nitroketene N,S-acetals has been developed. This methodology provides an efficient strategy for the construction of valuable nitro-containing heterocyclic compounds. This protocol features mild reaction conditions, easily available starting materials, broad substrate scope and easy scalability.

From N-H Nitration to Controllable Aromatic Mononitration and Dinitration-The Discovery of a Versatile and Powerful N-Nitropyrazole Nitrating Reagent

Nitroaromatics are tremendously valuable organic compounds with a long history of being used as pharmaceuticals, agrochemicals, and explosives as well as vital intermediates to a wide variety of chemicals. Consequently, the exploration of aromatic nitration has become an important endeavor in both academia and industry. Herein, we report the identification of a powerful nitrating reagent, 5-methyl-1,3-dinitro-1H-pyrazole, from the N-nitro-type reagent library constructed using a practical N-H nitration method. This nitrating reagent behaves as a controllable source of the nitronium ion, enabling mild and scalable nitration of a broad range of (hetero)arenes with good functional group tolerance. Of note, our nitration method could be controlled by manipulating the reaction conditions to furnish mononitrated or dinitrated product selectively. The value of this method in medicinal chemistry has been well established by its efficient late-stage C-H nitration of complex biorelevant molecules. Density functional theory (DFT) calculations and preliminary mechanistic studies reveal that the powerfulness and versatility of this nitrating reagent are due to the synergistic "nitro effect" and "methyl effect".

Organic Nitrating Reagents

Nitro compounds are vital raw chemicals that are widely used in academic laboratories and industries for the preparation of various drugs, agrochemicals, and materials. Thus, nitrating reactions are of great importance for chemists and are even taught in schools as one of the fundamental transformations in organic synthesis. Since the discovery of the first nitrating reactions in the 19th century, progress in this field has been constant. Yet, for many years the classical electrophilic nitration approach using a mixture of strong mineral acids dominated the field. However, in recent decades, the attention of researchers has focused on new reactivity and new reagents that can provide access to nitro compounds in a practical and straightforward way under mild reaction conditions. Organic nitrating reagents have played a special role in this field since they have enhanced reactivity. They also allow nitration to be carried out in an ecofriendly and sustainable manner. This review examines the development and application of organic nitrating reagents.

1 Introduction

2 Organic Nitrating Reagents

2.1 Alkyl Nitrites

2.2 Nitroalkanes

2.3 Alkyl Nitrates

2.4 N-Nitroamides

2.5 N-Nitropyrazole

2.6 N-Nitropyridinium Salts

3 Organic Nitrating Reagents Generated In Situ

3.1 Acyl Nitrates

3.2 Trimethylsilyl Nitrate

3.3 Nitro Onium Salts

4 Organic Nitronium Salts

5 Organic Nitrates and Nitrites

5.1 Ammonium Nitrates

5.2 Heteroarylium Nitrates

5.3 Other Organic Nitrates

5.4 Organic Nitrites

6 Conclusion and Outlook

Ligand-Promoted Nickel-Catalyzed para-Selective Carboxylation of Anisoles

It has always been a challenge in free radical chemistry to control site selectivity during the reaction of free radicals with aromatic rings. Herein, we report the site-selective carboxylation of anisoles through the direct reaction of the bromoform radical with a benzene ring at the para position under the assistance of 2,9-dimethyl-4,7-diphenyl-1,10-phenanthroline with nickel(II) as the catalyst. A wide variety of anisoles were compatible, leading to para-carboxylated products in moderate to good yields. A preliminary mechanistic study suggested that the Ni(II) complex coordinates with the methoxyl group of the aromatic ring, which may have increased the steric hindrance at the ortho and meta positions, while this weak interaction reduces the aromaticity of the aromatic ring, affording an activated phenyl ring, thereby leading to highly para-selective carboxylation.

Acid-Free Copper-Catalyzed Electrophilic Nitration of Electron-Rich Arenes with Guanidine Nitrate

A practical copper-catalyzed nitration of electron-rich arenes with trimethylsilyl chloride and guanidine nitrate is reported. A variety of nitrated products were generated in moderate to excellent yields (32-99%) at ambient temperature under acid-free, open-flask, and operationally simple conditions.

Electrochemical Nitration with Nitrite

Aromatic nitration has tremendous importance in organic chemistry as nitroaromatic compounds serve as versatile building blocks. This study represents the electrochemical aromatic nitration with NBu₄ NO₂ , which serves a dual role as supporting electrolyte and as a safe, readily available, and easy-to-handle nitro source. Stoichiometric amounts of 1,1,1-3,3,3-hexafluoroisopropan-2-ol (HFIP) in MeCN significantly increase the yield by solvent control. The reaction mechanism is based on electrochemical oxidation of nitrite to NO₂ , which initiates the nitration reaction in a divided electrolysis cell with inexpensive graphite electrodes. Overall, the reaction is demonstrated for 20 examples with yields of up to 88 %. Scalability is demonstrated by a 13-fold scale-up.

Development of an Antibiotic Resistance Breaker to Resensitize Drug-Resistant Staphylococcus aureus: In Silico and In Vitro Approach

Efflux pumps are one of the predominant microbial resistant mechanisms leading to the development of multidrug resistance. In Staphylococcus aureus, overexpression of NorA protein enables the efflux of antibiotics belonging to the class of fluoroquinolones and, thus, makes S. aureus resistant. Hence, NorA efflux pumps are being extensively exploited as the potential drug target to evade bacterial resistance and resensitize bacteria to the existing antibiotics. Although several molecules are reported to inhibit NorA efflux pump effectively, boronic acid derivatives were shown to have promising NorA efflux pump inhibition. In this regard, the current study exploits 6-(3-phenylpropoxy)pyridine-3-boronic acid to further improve the activity and reduce cytotoxicity using the bioisostere approach, a classical medicinal chemistry concept. Using the SWISS-Bioisostere online tool, from the parent compound, 42 compounds were obtained upon the replacement of the boronic acid. The 42 compounds were docked with modeled NorA protein, and key molecular interactions of the prominent compounds were assessed. The top hit compounds were further analyzed for their drug-like properties using ADMET studies. The identified potent lead, 5-nitro-2-(3-phenylpropoxy)pyridine (5-NPPP), was synthesized, and in vitro efficacy studies have been proven to show enhanced efflux inhibition, thus acting as a potent antibiotic breaker to resensitize S. aureus without elucidating any cytotoxic effect to the host Hep-G2 cell lines.

Recent developments in decarboxylative C(aryl)-X bond formation from (hetero)aryl carboxylic acids

Decarboxylative coupling reactions using readily available (hetero)aryl carboxylic acids are a highly efficient approach for the formation of new C-C and C-X bonds. These decarboxylative coupling reactions eliminate CO2 as a by-product, resulting in a greener and environmentally more benign approach than conventional coupling reactions. In this review, we summarize the recent developments in ipso-decarboxylative C-X (X = O/N/halo/S/Se/P/CN) bond formations using (hetero)aryl carboxylic acids. Furthermore, we highlight the current limitations and future research opportunities of aryl-decarboxylative coupling reactions.

Recent progress in the nitration of arenes and alkenes

Nitro compounds are a predominant class of synthetic intermediates and building blocks for the preparation of a wide range of nitrogen-containing compounds in the chemical industry. As such, impressive progress has been currently made in the nitration of aromatics and olefins with excellent functional group tolerance and site-selectivity. In this mini review, we intend to highlight the regiospecific nitration of arenes and alkenes in various reaction systems. The involved mechanisms are discussed as well.

Recent Advances in the Synthesis and Development of Nitroaromatics as Anti-Infective Drugs

Infectious diseases commonly occur in tropical and sub-tropical countries. The pathogens of such diseases are able to multiply in human hosts, warranting their continual survival. Infections that are commonplace include malaria, chagas, trypanosomiasis, giardiasis, amoebiasis, toxoplasmosis and leishmaniasis. Malaria is known to cause symptoms, such as high fever, chills, nausea and vomiting, whereas chagas disease causes enlarged lymph glands, muscle pain, swelling and chest pain. People suffering from African trypanosomiasis may experience severe headaches, irritability, extreme fatigue and swollen lymph nodes. As an infectious disease progresses, the human host may also experience personality changes and neurologic problems. If left untreated, most of these diseases can lead to death. Parasites, microbes and bacteria are increasingly adapting and generating strains that are resistant to current clinical drugs. Drug resistance creates an urgency for the development of new drugs to treat these infections. Nitro containing drugs, such as chloramphenicol, metronidazole, tinidazole and secnidazole had been banned for use as antiparasitic agents due to their toxicity. However, recent discoveries of nitrocontaining anti-tuberculosis drugs, i.e. delamanid and pretonamid, and the repurposing of flexinidazole for use in combination with eflornithine for the treatment of human trypanosomiasis, have ignited interest in nitroaromatic scaffolds as viable sources of potential anti-infective agents. This review highlights the differences between old and new nitration methodologies. It furthermore offers insights into recent advances in the development of nitroaromatics as anti-infective drugs.

Ceric ammonium nitrate (CAN) enabled concerted nitration/ureation of carbodiimides to synthesize o-nitroaryl ureas

A simple and facile strategy to construct o-nitroaryl urea employing carbodiimides and ceric ammonium nitrate (CAN) with high functional group compatibility via concerted nitration/ureation has been described.

Practical catalytic nitration directly with commercial nitric acid for the preparation of aliphatic nitroesters

To pursue a sustainable and efficient approach for aliphatic nitroester preparation from alcohol, europium-triflate-catalyzed nitration, which directly uses commercial nitric acid, has been successfully developed. Gram scalability with operational ease showed its practicability.

A Walk through Recent Nitro Chemistry Advances

Chemistry of nitro groups and nitro compounds has long been intensively studied. Despite their long history, new reactions and methodologies are still being found today. This is due to the diverse reactivity of the nitro group. The importance of nitro chemistry will continue to increase in the future in terms of elaborate synthesis. In this article, we will take a walk through the recent advances in nitro chemistry that have been made in past decades.

How to make C–N bonds using boronic acids and their derivatives without transition metals

No need for transition-metal catalysis in amination, amidation, nitration or nitrosation reactions with boron derivatives as reagents.

Practical copper-catalyzed chloronitration of alkenes with TMSCl and guanidine nitrate

A practical chloronitration of alkenes catalyzed by cheap copper sulfate pentahydrate to provide vic-chloronitro compounds in good to excellent yields was developed, and the resulting products could be transformed into diverse nitro compounds.

Tandem transformations and multicomponent reactions utilizing alcohols following dehydrogenation strategy

In this review, the progress of tandem transformation of nitro, nitrile and azide functionalities is summarised to develop new C–C and C–N bonds as well as multi-component reactions using alcohols.

A three-component approach to isoxazolines and isoxazoles under metal-free conditions

A 1,3-dipolar cycloaddition of 2-methylquinoline, tert-butyl nitrite (TBN) and alkynes or alkenes for the synthesis of biheteroaryls containing both isoxazoline/isoxazole and quinoline motifs has been developed. In this protocol, TBN serves as a convenient N-O source to convert 2-methylquinoline into intermediate nitrile oxides in situ.

Facile access to nitroarenes and nitroheteroarenes using N-nitrosaccharin

Nitroaromatics and nitroheteroaromatics serve as key building blocks and intermediates in synthesis, and form the core scaffold of a vast number of materials, dyes, explosives, agrochemicals and pharmaceuticals. However, their synthesis relies on harsh methodologies involving excess mineral acids, which present a number of critical drawbacks in terms of functional group compatibility and environmental impact. Modern, alternative strategies still suffer from significant limitations in terms of practicality, and a general protocol amenable to the direct C-H functionalization of a broad range of aromatics has remained elusive. Herein we introduce a bench-stable, inexpensive, easy to synthesize and recyclable nitrating reagent based on saccharin. This reagent acts as a controllable source of the nitronium ion, allowing mild and practical nitration of both arenes and heteroarenes displaying an exceptional functional group tolerance.

meta-Nitration of Arenes Bearing ortho/para Directing Group(s) Using C-H Borylation

Herein, we report the meta-nitration of arenes bearing ortho/para directing group(s) using the iridium-catalyzed C-H borylation reaction followed by a newly developed copper(II)-catalyzed transformation of the crude aryl pinacol boronate esters into the corresponding nitroarenes in a one-pot fashion. This protocol allows the synthesis of meta-nitrated arenes that are tedious to prepare or require multistep synthesis using the existing methods. The reaction tolerates a wide array of ortho/para-directing groups, such as -F, -Cl, -Br, -CH₃ , -Et, -iPr -OCH₃ , and -OCF₃ . It also provides regioselective access to the nitro derivatives of π-electron-deficient heterocycles, such as pyridine and quinoline derivatives. The application of this method is demonstrated in the late-stage modification of complex molecules and also in the gram-scale preparation of an intermediate en route to the FDA-approved drug Nilotinib. Finally, we have shown that the nitro product obtained by this strategy can also be directly converted to the aniline or hindered amine through Baran's amination protocol.