An Indole-based Chromofluorogenic Probe for Detection of Trivalent Al3+, Ga3+, In3+ and Fe3+ Ions

An easily synthesizable indole-derived chromofluorogenic probe InNS has been demonstrated for recognition of trivalent metal ions (i. e., Al3+, Ga3+, In3+ and Fe3+). Both UV-Vis and emission spectral studies have been employed to assess the cation sensing ability of InNS in semi-aqueous medium. This probe exhibited a chromogenic response for these metal ions, and the related change was accompanied with the appearance of a new absorption near 376 nm. An obvious color change from pale yellow to dark yellow could also be noticed upon addition of the aforementioned metal ions to the probe's solution. Distinctively from the UV-Vis analysis, the fluorescence behavior of InNS was completely different; it displayed a 'turn-on' fluorescence response for only Al3+ among all the studied cations. The detection limit and the association constant (Ka) for Al3+ were determined to be 12.5 nM and 6.85×106 M-1, respectively. A potential 1 : 1 binding mode of Al3+-InNS has been established based on Job's plot, 1H NMR and DFT analyses. The reversibility experiment was conducted using strongly chelating EDTA ion, and a corresponding logic gate has been devised. In terms of practical applications, the InNS has been utilized to detect Al3+ in human breast carcinoma (MCF-7) cell lines displaying promising 'turn-on' bioimaging experiments.

Robust Optical Detection of Ga3+ by a Rhodamine- and Coumarin-Based Proficient Probe: Theoretical Investigations and Biological Applications

The present investigation highlights a rhodamine-B- and coumarin-based efficient probe that selectively detects Ga3+ over other metal ions. The active pocket of the ligand for trapping the metal ions and the binding stoichiometry of its Ga3+ complex were discovered by single-crystal X-ray diffraction (SC-XRD) analysis. This binding stoichiometry was further confirmed in the solution state by mass spectrometry and Job's plot. The detection limit was found to be at the nanomolar level. Pyrophosphate being a well-known quencher could easily quench the fluorescence intensity of the RC in the presence of Ga3+ and reversibly recognize Ga3+ in the solution. The spiro ring opening of the ligand after Ga3+ insertion is proposed to be the principal mechanism for the turn-on fluorescence response. This ring opening was confirmed by SC-XRD data and nuclear magnetic resonance (NMR) titration experiments. Both ground- and excited-state calculations of the ligand and complex have been carried out to obtain information about their energy levels and to obtain the theoretical electronic spectra. Furthermore, the live-cell imaging of the probe only and the probe after the addition of Ga3+ have been carried out in HaCaT cells and satisfactory responses were observed. Interestingly, with the help of this probe, Ga3+ can be tracked inside the intracellular organelle such as lysosomes along with other regions of the cell. The article highlights a rhodamine-coumarin-based probe for the detection of Ga3+ over other metal ions with a nanomolar level detection limit. Structural characterization of the ligand and its Ga3+ complex was investigated by SC-XRD. Density functional theory (DFT) and time-dependent DFT (TD-DFT) studies were carried out to explore the excited-state energies and electronic spectra. The application of the probe for the detection of Ga3+ in live cells has been explored, and positive responses were observed.

Solvothermal synthesis and device fabrication of a Eu3+-based metal-organic framework as a turn-on and blue-shift fluorescence sensor toward Cr3+, Al3+ and Ga3

A novel three-dimensional Eu³⁺-based metal-organic framework with the formula {[(CH₃)₂NH₂][Eu(BTDI)]·H₂O·DMF}_n (JXUST-25) was prepared by solvothermal method based on Eu³⁺ and 5,5'-(benzothiadiazole-4,7-diyl)diisophthalic acid (H₄BTDI) with benzothiadiazole (BTD) luminescent groups. Due to the presence of Eu³⁺ and organic fluorescence ligand, JXUST-25 displays turn-on and blue-shift fluorescence toward Cr³⁺, Al³⁺ and Ga³⁺ with limits of detection (LOD) of 0.073, 0.006 and 0.030 ppm, respectively. Interestingly, the alkaline environment can change the fluorescence of JXUST-25 toward Cr³⁺/Al³⁺/Ga³⁺ and the addition of HCl solution realizes the reversible change of the fluorescence of JXUST-25 toward Cr³⁺/Al³⁺/Ga³⁺. It is noteworthy that the fluorescent test paper and light-emitting diode lamp based on JXUST-25 can effectively detect Cr³⁺, Al³⁺ and Ga³⁺ by the visual changes. In addition, the turn-on and blue-shift fluorescence between JXUST-25 and M³⁺ ions may be caused by the host-guest interaction and the absorbance caused enhancement mechanism.

Exploration of Molecular Structure, DFT Calculations, and Antioxidant Activity of a Hydrazone Derivative

The hydrazine derivatives are known to possess several biological activities including anticancer, antibacterial and anti-fungal, anticonvulsant, and antioxidant. This communication presents the synthesis, X-ray crystal structure analysis, DFT calculations, cell cytotoxicity, and antioxidant activity of the Schiff base 4,4'-((1E,1'E)-hydrazine-1,2-diylidenebis(ethan-1-yl-1-ylidene))bis(benzene-1,3-diol) (compound 2). We have also isolated the side product compound 1 and characterized it using single X-ray crystallography. The crystal structure of compound 1 depicts that the ensuing C-H···N hydrogen bonding interaction is presented and discussed herein. In addition, the calculations using density functional theory (DFT) approximation supported by experimental 1H and 13C NMR studies on the key compound 2 are reported. The results of theoretical and experimental 1H and 13C NMR were concordant. The antioxidant activity of compound 2 was determined by using 2,2'-azinobis(3-ethylbenzthiazoline-6-sulfonic acid) (ABTS•+) radical cation assays and 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical assay. Compound 2 demonstrated excellent antioxidant activity in ABTS assay (IC50 = 4.30 ± 0.21 µM) and DPPH assay (IC50 = 81.06 ± 0.72 µM) with almost no cytotoxicity below 25 µM.

A novel hydrazone-based fluorescent "off-on-off" probe for relay sensing of Ga3+ and PPi ions

A novel hydrazone-based fluorescent probe (E)-3-((2-(benzo[d]thiazol-2-yl)hydrazono)methyl)-4H-chromen-4-one (BTC) has been rationally designed and synthesized. BTC can subsequently detect Ga³⁺ and PPi ions through the absorption and emission off-on-off response with high specificity. Importantly, fluorescent probe BTC can well discriminate Ga³⁺ from Al³⁺ and In³⁺. The association constant (K) was calculated as 2.06 × 10⁴M^-1, and the limit of detection (LOD) was calculated as 4.88 × 10^-2μM. Competitive binding studies also illustrated good results of the probe BTC towards Ga³⁺. Job's plot and HRMS results substantiated the 1:1 stoichiometry between BTC and Ga³⁺ ion. The interaction binding mode of BTC with Ga³⁺ was proposed by HRMS, ¹H NMR spectral titration, UV-vis absorption and fluorescence spectral measurements. The combination of the restraint of the photo-induced electron transfer (PET) process and the chelation enhanced fluorescence (CHEF) process is responsible for the fluorescence enhancement of this probe. The in situ chelated BTC-Ga³⁺ could further monitor pyrophosphate ion (PPi) by demetallization process with quenching fluorescence emission. Additionally, the BTC and BTC-Ga³⁺ showed good cell permeability and could detect Ga³⁺ and PPi ions in onioninner epidermal cells, respectively.

A quinoline-benzothiazole-based chemosensor coupled with a smartphone for the rapid detection of In3+ ions

A newly designed quinoline-benzothiazole probe 2-((Z)-((E)-benzo[d]thiazol-2(3H)-ylidenehydrazono)methyl)quinolin-8-ol (L) was synthesized by reacting 8-hydroxyquinoline-2-carbaldehyde with 2-hydrazinobenzothiazole and structurally characterized by various spectroscopic techniques. The sensing ability of probe L was studied with various cations using colorimetry, test paper strips, a red-green-blue (RGB) model and UV-visible spectrophotometry in DMSO : H₂O (3 : 7, v/v). The pale yellow colour of L turns into orange on contact with In³⁺ ions, whereas other tested metal ions did not show any change in colour. The probe L exhibits an absorbance band at 360 nm due to ligand-to-ligand charge transfer (LLCT); upon interaction with In³⁺ ions, it exhibits a band at 445 nm due to ligand-to-metal charge transfer (LMCT). The probe L binds In³⁺ in a 2 : 1 ratio with an association constant of 8.1 × 10⁵ M^-1 and this is established using the Job's and Benesi-Hildebrand (B-H) methods. The probe L can work in the pH range of 4-8 without interfering with other competing ions. It can be used to detect quantities as low as 2.3 ppb and 85 ppb by spectrophotometry and RGB, respectively. The binding mechanism was studied by ¹H NMR titration, ESI mass and FT-IR spectral analysis and well supported by theoretical studies. Overall, probe L demonstrates promising potential for the detection of In³⁺ ions in the semi-aqueous phase and this is its first report as a colorimetric chromogenic probe.

Two 5-(thiophene-2-yl)oxazole derived “turn on” fluorescence chemosensors for detection of Ga3+ and practical applications

Sensors L1 and L2 show highly selective responses to Ga3+ even over Al3+ and In3+ with effective fluorescence enhancement.

A highly selective "turn-on" water-soluble fluorescent sensor for gallium ion detection

In this work, a novel sensor, (E)-N′-(3-(tert-butyl)-2-hydroxybenzylidene)thiophene-2-carbohydrazide (1), based on salicylaldehyde and thiophene hydrazide moieties was designed and synthesized. The single-crystal structure of 1 was achieved and studied for understanding its functional properties. The interaction and recognition abilities of 1 with different metal ions were investigated. Sensor 1 showed excellent “turn-on” fluorescence with highly selective and specific recognition ability in the presence of gallium ions (Ga³⁺) in an aqueous solution. The sensing behavior of 1 with Ga³⁺ was also studied by photophysical experiments, ESI-MS analysis, and ¹H NMR titration. The limit of detection (LOD) and limit of quantification (LOQ) of 1 for the detection of Ga³⁺ in an aqueous solution were calculated as 58 nM, and 192 nM, respectively. DFT calculations were carried out to optimize the configuration of 1 and 1–Ga³⁺ complexes and rationalize the photophysical experimental data. Highly selective test strips based on sensor 1 were developed for Ga³⁺ detection. Sensor 1 was also used to detect Ga³⁺ in actual water samples, and a considerable recovery rate was obtained.

In this work, a highly selective water-soluble “turn-on” fluorescent sensor for gallium ion recognition was reported.

A Thiourea-Containing Fluorescent Chemosensor for Detecting Ga3

A thiourea-based fluorescent chemosensor NADA, (E)-2-(4-(diethylamino)-2-hydroxybenzylidene)-N-(naphthalen-1-yl)hydrazine-1-carbothioamide, has been designed and synthesized. NADA could detect Ga³⁺ through a fluorescent turn-on with a low detection limit (0.29 μM). Importantly, NADA could effectively discriminate Ga³⁺ from Al³⁺ and In³⁺. The binding mechanism of NADA with Ga³⁺ was identified by ESI-mass, NMR titration, and DFT calculations.

Selective ratiometric red-emission detection of In3+ in aqueous solutions and in live cells using a fluorescent peptidyl probe and metal chelating agent

Indium has been regarded as one of the most rarely used metal ions; however, the consumption of indium has increased intensively due to its increasing use in electrodes of liquid crystal displays (LCDs). In recent years, warnings have been issued about the toxicity of indium to aquatic ecosystems and humans. Thus, the development of efficient and selective detection methods for In³⁺ in aquatic environments as well as in live cells is highly required. However, the selective and sensitive detection of In³⁺ in the presence of trivalent metal ions and other metal ions is highly challenging. In the present study, we synthesized a fluorescent probe (1) for In³⁺ and Al³⁺ based on an unnatural peptide receptor and an aggregation-induced emission fluorophore and developed a selective fluorescent detection method for In³⁺ in aqueous solutions and live cells using the probe and a metal chelating agent. 1 recognized In³⁺ and Al³⁺ selectively among 19 metal ions in aqueous solutions depending on pH by the enhancement of the red emission at 600 nm and decrease in the green emission at 530 nm. 1 sensitively detected In³⁺ and Al³⁺ by ratiometric response in a wide pH range (3.5-7.4), and the ratiometric response was complete within 20 seconds in an aqueous buffered solution at pH 5.0. Interestingly, the addition of EDTA to the complex of 1 with In³⁺ or Al³⁺ did not induce the Al³⁺-free spectrum but instead induced the In³⁺-free spectrum; thus, In³⁺ and Al³⁺ could be easily differentiated. The detection limit of 1 for In³⁺ ions was 211 nM (R² = 0.981) in purely aqueous solutions. The fluorescence ratiometric detection method using 1 could quantify low concentrations of In³⁺ in ground water and tap water. Fluorescence cell image studies revealed that the probe was cell-permeable, and low concentrations of In³⁺ inside the cells could be recognized by the enhancement of the red emission at 600 nm. The binding mode study via NMR, IR, and CD spectroscopy revealed how the peptide receptor of 1 interacted with In³⁺ and resulted in the enhancement of the red emission in an aqueous solution.

A selective “turn-on” sensor for recognizing In3+ and Zn2+ in respective systems based on imidazo[2,1-b]thiazole

An imidazo[2,1-b]thiazole-based compound (X) was designed and synthesized as an “off–on–off” sensor for the multiple recognition of In³⁺ and Zn²⁺ in different systems.

Combined experimental and theoretical studies on a phenyl thiadiazole-based novel turn-on fluorescent colorimetric Schiff base chemosensor for the selective and sensitive detection of Al3+

A phenyl thiadiazole based receptor (L) has been presented for fluorescent colorimetric detection of Al³⁺ ion with very low detection limit in aqueous medium. The probe L can be applied for logic gate formation, recovery of contaminated water samples and smart-phone based analysis.

Double Schiff base from thiophene-2,5-dicarboxylic acid as an “off–on–off” fluorescence sensor for the sequential detection of In3+ and PPi

A double Schiff base T as acceptor for metal ions derived from thiophene-2,5-dicarboxylic acid was designed and synthesized, and showed a high selectivity for In³⁺ in a DMF/H₂O buffer solution.

Turn-On Fluorescent Sensors for the Selective Detection of Al3+ (and Ga3+) and PPi Ions

Rationally designed multiple hydroxyl-group-based chemosensors L1-L4 containing arene-based fluorophores are presented for the selective detection of Al³⁺ and Ga³⁺ ions. Changes in the absorption and emission spectra of L1-L4 in ethanol were easily observable upon the addition of Al³⁺ and Ga³⁺ ions. Competitive binding studies, detection limits, and binding constants illustrate significant sensing abilities of these chemosensors with L4, showing the best results. The interaction of Al³⁺/Ga³⁺ ions with chemosensor L4 was investigated by fluorescence lifetime measurements, whereas Job's plot, high-resolution mass spectrometry, and ¹H NMR spectral titrations substantiated the stoichiometry between L4 and Al³⁺/Ga³⁺ ions. The solution-generated [L-M³⁺] species further detected pyrophosphate ion (PPi) by exhibiting emission enhancement and a visible color change. The binding of Al³⁺/Ga³⁺ ions with chemosensor L4 was further supported by density functional theory studies. Reversibility for the detection of Al³⁺/Ga³⁺ ions was achieved by utilizing a suitable proton source. The multiionic response, reversibility, and optical visualization of the present chemosensors make them ideal for practical applications for real samples, which have been illustrated by paper-strip as well as polystyrene film-based detection.

TDDFT study on aluminum and fluoride dual-sensing mechanism of a Schiff-Base sensor

The aluminum and fluoride dual-sensing mechanism of a previously reported sensor with a Schiff-base moiety (Spectrochim. Acta A, 2017, 183, 267-274) has been investigated by density functional theory (DFT) and time-dependent DFT (TDDFT) methods. The present calculations reproduce the photoproperties of the sensor as well as its aluminum and fluoride complexes, which illustrates that DFT and TDDFT constitute a reliable tool for uncovering detailed fluorescence-based sensing mechanisms in diverse electronic states. Theoretical results indicate that there are two OH⋯N hydrogen bonds in the sensor and two OH⋯F hydrogen bonds in its F¯ complex. Different degrees of coplanarity caused by these hydrogen bonds are responsible for their distinct absorption wavelengths. However, excited-state geometry optimization and a scan of the potential-energy surface show that there is twisted intramolecular charge transfer about the CN bond in the sensor molecule and an excited-state proton-transfer process from the fluoride anion to the neighboring N atom in the fluoride-sensor complex, whereby the fluorescence is quenched. A chelation-enhanced fluorescence effect associated with the aluminum-sensor complex shows a different excited-state process. The local excitation and emission occur exclusively within the planar fluorophore, and negligible structural change upon excitation of the aluminum-sensor complex leads to its strong fluorescence. Therefore, it is theoretically explained why the sensor may be successfully used to analyze the fluoride anion by absorption spectroscopy and the aluminum cation by emission spectroscopy.

A hydrazono-quinoline-based chemosensor sensing In3+ and Zn2+via fluorescence turn-on and ClO−via color change in aqueous solution

A multi-target sensor, based on hydrazono-quinoline, was developed for fluorescence turn-on detection of In³⁺ and Zn²⁺ and colorimetric detection of ClO⁻.

A Highly Selective Fluorescent Chemosensor for Detecting Indium(III) with a Low Detection Limit and its Application

A highly selective chemosensor BHC ((E)-N-benzhydryl-2-((2-hydroxynaphthalen-1-yl)methylene)hydrazine-1-carbothioamide) for detecting indium(III) was synthesized. Sensor BHC can detect In(III) by a fluorescence turn-on method. The detection limit was analyzed to be 0.89 μM. Importantly, this value is the lowest among those previously known for fluorescent turn-on In(III) chemosensors. Based on the analytical methods like ESI-mass, Job plot, and theoretical calculations, the detection mechanism for In(III) was illustrated to be chelation-enhanced fluorescence (CHEF) effect. Additionally, sensor BHC was successfully applied to test strips.