Reversible Sensing Technologies Using Upcycled TPEE: Crafting pH and Light Responsive Materials towards Sustainable Monitoring

Multiresponsive materials with reversible and durable characteristics are indispensable because of their promising applications in environmental change detections. To fabricate multiresponsive materials in mass production, however, complex reactions and impractical situations are often involved. Herein, a dual responsive (light and pH) spiropyran-based smart sensor fabricated by a simple layer-by-layer (LbL) assembly process from upcycled thermoplastic polyester elastomer (TPEE) materials derived from recycled polyethylene terephthalate (r-PET) is proposed. Positively charged chitosan solutions and negatively charged merocyanine-COOH (MC-COOH) solutions are employed in the LbL assembly technique, forming the chitosan-spiropyran deposited TPEE (TPEE-CH-SP) film. Upon UV irradiation, the spiropyran-COOH (SP-COOH) molecules on the TPEE-CH-SP film undergo the ring-opening isomerization, along with an apparent color change from colorless to purple, to transform into the MC-COOH molecules. By further exposing the TPEE-CH-MC film to hydrogen chloride (HCl) and nitric acid (HNO3) vapors, the MC-COOH molecules can be transformed into protonated merocyanine-COOH (MCH-COOH) with the simultaneous color change from purple to yellow.

Recent studies on proteins and polysaccharides-based pH-responsive fluorescent materials

Polymer-based pH-responsive fluorescent materials have the characteristics of fast response, real-time monitoring, visualisation, and easy forming. Consequently, they have attracted widespread attention in wound healing, sweat monitoring, security and anti-counterfeiting, freshness detection of aquatic products, metal-ion sensing and bioimaging. This paper analyses the preparation principles and characteristics of pH-responsive fluorescent materials based on cellulose, chitosan and proteins. It then outlines the fluorescence properties, environmental response mechanisms and applications of various luminescent materials. Next, the research indicates that amines, N-heterocyclic rings, carboxyl groups and amino plasmonic groups on the fluorescent molecule structure and polymer skeleton appear to change the degree of ionisation under acid or alkali stimulation, which affects the light absorption ability of chromophore electrons, thus producing fluorescence changes in fluorescent materials under different pH stimuli. On this basis, the challenges and growth encountered in the development of proteins and polysaccharides-based pH-responsive fluorescent materials were prospected to provide theoretical references and technical support for constructing pH-responsive fluorescent materials with high stability, high sensitivity, long-lasting pH-response and wide detection range.

Transparent regenerated cellulose film containing azobenzene group with reversible stimulus discoloration property

The cellulose film, exhibiting color alterations in response to external stimuli, presents itself as a promising functional material. In this study, a universal dissolution-regeneration technique was employed to manufacture a transparent, regenerated cellulose film, characterized by its reversible multi-stimulus discoloration property. This functional cellulose film, endowed with both photochromic and acid-chromic attributes, was synthesized through the introduction of a cellulose-grafted azobenzene derivative into the cellulose solution. The hue of a cellulose film irradiated with ultraviolet light could be inverted upon exposure to visible light or heat. Furthermore, when subject to heating, irradiation, or immersion in an acidic medium, this functional film demonstrated pronounced transparency. The acid-chromic behavior of the film was readily discernible when exposed to highly concentrated acidic aqueous solutions. Both the photochromic and acid-chromic phenomena were discernable to the unaided eye. After ten cycles, no fading of the reversible discoloration properties of the material occurred. This transparent regenerated cellulose film stands as a viable candidate for applications in optical data storage, intelligent switches, and sensors, owing to its capacity for reversible stimulus-triggered discoloration.

A Polyelectrolyte Colloidal Brush Based on Cellulose: Perspectives for Future Applications

This feature article is devoted to the evaluation of different techniques for producing colloidal polyelectrolyte brushes (CPEBs) based on cellulose nanofibers modified with grafted polyacrylates. The paper also reviews the potential applications of these CPEBs in designing electrode materials and as reinforcing additives. Additionally, we discuss our own perspectives on investigating composites with CPEBs. Herein, polyacrylic acid (PAA) was grafted onto the surface of cellulose nanofibers (CNFs) employing a "grafting from" approach. The effect of the PAA shell on the morphological structure of a composite with polypyrrole (PPy) was investigated. The performance of as-obtained CNF-PAA/PPy as organic electrode material for supercapacitors was examined. Furthermore, this research highlights the ability of CNF-PAA filler to act as an additional crosslinker forming a physical sub-network due to the hydrogen bond interaction inside chemically crosslinked polyacrylamide (PAAm) hydrogels. The enhancement of the mechanical properties of the material with a concomitant decrease in its swelling ratio compared to a pristine PAAm hydrogel was observed. The findings were compared with the recent theoretical foundation pertaining to other similar materials.

Tunable poly(lauryl methacrylate) surface grafting via SI-ATRP on a one-pot synthesized cellulose nanofibril macroinitiator core as a shear-thinning rheology modifier and drag reducer

The optimally one-pot synthesized 2-bromoproponyl esterified cellulose nanofibril (Br-CNF) has been validated as a robust macroinitiator for self-surface-initiated atom transfer radical polymerization (SI-ATRP) of lauryl methacrylate (LMA) in tunable graft lengths and high conversions of up to 92.7%. SI-ATRP of LMA surface brushes on Br-CNF followed first order kinetics in lengths at up to 46 degree of polymerization (DP) based on mass balance or 31 DP by solution-state 1H NMR in DMSO-d6. With increasing PLMA graft lengths, Br-CNF-g-PLMA cast films exhibited increasing hydrophobicity with water contact angles from 80.9° to 110.6°. The novel Br-CNF-g-PLMA exhibited dual shear thinning behavior of the Br-CNF core as evident by n < 1 flow behavior index and drag reducing properties of PLMA grafts with increased viscosity at up to 21 071×. Br-CNF-g-PLMA with 46 DP could be fully dispersed in silicon pump oil to function as a drag reducer to enhance viscosity up to 5× at 25, 40, and 55 °C. The novel macroinitiator capability of Br-CNF in SI-ATRP of vinyl monomers and the bottlebrush-like LMA surface grafted Br-CNF as highly effective viscosity modifier and drag reducer further demonstrate the versatile functionality of Br-CNF beyond hydrophobic coatings and reactive polyols previously reported.

H-bond interaction traps vibrating fluorophore in polyurethane matrix for bifunctional environmental monitoring

A simple strategy is presented for the bifunctional detection of environmental organic vapor and temperature by utilizing H-bond interactions to trap a butterfly-vibration-based fluorophore (DPAC-OH) in a polyurethane (PU) matrix. The method opens up a new path for large-scale environmental inspections and the design of dual-response luminescent materials.

2-Bromopropionyl Esterified Cellulose Nanofibrils as Chain Extenders or Polyols in Stoichiometrically Optimized Syntheses of High-Strength Polyurethanes

2-Bromopropionyl bromide esterified cellulose nanofibrils (Br-CNFs) facilely synthesized from one-pot esterification of cellulose and in situ ultrasonication exhibited excellent N,N-dimethylformamide (DMF) dispersibility and reactivity to partially replace either chain extender or soft segment diol in the stoichiometrically optimized syntheses of polyurethanes (PUs). PUs polymerized with Br-CNF to replace either 11 mol% 1,4-butadiol chain extender OHs or 1.8 mol% polytetramethylene ether glycol OHs, i.e., 1.5 or 0.3 wt% Br-CNF in PUs, exhibited an over 3 times increased modulus, nearly 4 times higher strength, and a 50% increase in strain. In either role, the experimental modulus exceeding those predicted by the Halpin-Tsai model gave evidence of the stoichiometrically optimized covalent bonding with Br-CNF, while the improved strain was attributed to increased hydrogen-bonding interactions between Br-CNF and the soft segment. These new Br-CNFs not only offer novel synthetic strategies to incorporate nanocelluloses in polyurethanes but also maximize their reinforcing effects via their versatile polyol reactant and cross-linking roles, demonstrating promising applications in the synthesis of other polymers.

Nanocellulose as a promising substrate for advanced sensors and their applications

Nanocellulose has broad and promising applications owing to its low density, large specific surface area, high mechanical strength, modifiability, renewability. Recently, nanocellulose has been widely used to fabricate flexible, durable and environmental-friendly sensor substrates. In this contribution, the construction and characteristics of nanocellulose-based sensors are comprehensively reviewed. Various nanocellulose-based sensors are summarized and divided into colorimetric, fluorescent, electronic, electrochemical and SERS types according to the sensing mechanism. This review also introduces the applications of nanocellulose-based sensors in the fields of biomedicine, environmental monitoring, food safety, and wearable devices.

Incorporation of Polymer-Grafted Cellulose Nanocrystals into Latex-Based Pressure-Sensitive Adhesives

While the improvement of water-based adhesives with renewable additives is important as industry shifts toward more sustainable practices, a complete understanding of how the compatibility between additives and polymers affects adhesive performance is currently lacking. To elucidate these links, cellulose nanocrystals (CNCs) were first functionalized via surface-initiated atom-transfer radical polymerization with the hydrophobic polymers poly(butyl acrylate) (PBA) and poly(methyl methacrylate) (PMMA) to facilitate their incorporation into latex-based pressure-sensitive adhesives (PSAs). Next, PBA latexes were synthesized using seeded semibatch emulsion polymerization with unmodified or polymer-grafted CNCs added in situ at a loading of 0.5 or 1 phm (parts per hundred parts of monomer). Viscosity and electron microscopy suggested that the polymer-grafted CNCs were incorporated inside or on the latex particles. PSAs containing any CNC type had one or more improved properties (compared to the no-CNC "base case"); CNCs with a low degree of polymerization (DP) grafts exhibited improved tack (up to 2.5-fold higher) and peel strength (up to 6-fold higher) relative to PSAs with unmodified CNCs. The best performing PSA contained the low DP PMMA-grafted CNCs, which is attributed to the higher glass transition temperature and the higher wettability of the PMMA grafts compared to PBA, and the more uniform dispersion of polymer-grafted CNCs throughout the PSA film. In contrast, PSAs containing CNCs with high DP grafts resulted in reduced tack and peel strength (compared to low DP grafts) due to enhanced CNC aggregation. Unfortunately, all PSAs containing polymer-grafted CNCs exhibited inferior shear strength relative to PSAs with unmodified CNCs (and comparable shear strength to the no-CNC "base case"). Collectively, these results provide guidelines for future optimization of more sustainable latex-based PSAs.

Plant-Based Structures as an Opportunity to Engineer Optical Functions in Next-Generation Light Management

This review addresses the reconstruction of structural plant components (cellulose, lignin, and hemicelluloses) into materials displaying advanced optical properties. The strategies to isolate the main building blocks are discussed, and the effects of fibrillation, fibril alignment, densification, self-assembly, surface-patterning, and compositing are presented considering their role in engineering optical performance. Then, key elements that enable lignocellulosic to be translated into materials that present optical functionality, such as transparency, haze, reflectance, UV-blocking, luminescence, and structural colors, are described. Mapping the optical landscape that is accessible from lignocellulosics is shown as an essential step toward their utilization in smart devices. Advanced materials built from sustainable resources, including those obtained from industrial or agricultural side streams, demonstrate enormous promise in optoelectronics due to their potentially lower cost, while meeting or even exceeding current demands in performance. The requirements are summarized for the production and application of plant-based optically functional materials in different smart material applications and the review is concluded with a perspective about this active field of knowledge.

Fluorescent cellulose nanocrystals based on AIE luminogen for rapid detection of Fe3+ in aqueous solutions

Previously, we found that aggregation-induced emission (AIE) luminogen tetraphenylethylene (TPE) based fluorescent cellulose nanocrystals (TPE-CNCs) showed excellent AIE-active fluorescence properties and high selectivity and sensitivity for detecting nitrophenol explosives in aqueous solutions. Here, we further develop the application of TPE-CNCs for fluorescence detection of Fe³⁺ in aqueous solutions. The fluorescence of TPE-CNC aqueous suspensions is rapidly quenched (response time less than 10 s) due to the electron-transfer process between TPE and Fe³⁺ upon addition of Fe³⁺. TPE-CNCs have high sensitivity and selectivity toward Fe³⁺ over a broad pH range from 4 to 10. The limit of detection is determined to be 264 nM, which is below the World Health Organization (WHO) recommendations (5.36 μM) for Fe³⁺. Given the superior properties of TPE-CNCs, it has huge potential to be applied as a rapid and visual evaluation tool for drinking water quality. Collectively, we explore and develop fluorescent cellulose nanocrystals for multi-functional applications and TPE-CNCs can be used for practical applications in sensing, sewage treatment and bioimaging.

AIE-active fluorescent cellulose nanocrystals (TPE-CNCs) is developed as a high selectivity and sensitivity fluorescent probe for rapid detection of Fe³⁺ in aqueous solutions.

Polymeric nanostructures based on azobenzene and their biomedical applications: synthesis, self-assembly and stimuli-responsiveness

Amphiphilic polymers can self-assemble to form nanoparticles with different structures under suitable conditions. Polymer nanoparticles functionalized with aromatic azo groups are endowed with photo-responsive properties. In recent years, a variety of photoresponsive polymers and nanoparticles have been developed based on azobenzene, using different molecular design strategies and synthetic routes. This article reviews the progress of this rapidly developing research field, focusing on the structure, synthesis, assembly and response of photo-responsive polymer assemblies. According to the molecular structure, photo-responsive polymers can be divided into linear polymers containing azobenzene in a side chain, linear polymers containing azobenzene in the main chain, linear polymers containing azobenzene in an end group, branched polymers containing azobenzene and supramolecular polymers containing azobenzene. These systems have broad biomedical application prospects in the field of drug delivery and imaging applications.

A Novel Schiff Base-Modified Dialdehyde Cellulose-Based Fluorescent Probe for Al3+ and Its Application in Environmental Analysis

Cellulose is the most abundant natural polymer with good biodegradability and biocompatibility. In this paper, a novel fluorescent probe DAC-SD-NA for aluminum (Al³⁺ ) detection is successfully synthesized based on dialdehyde cellulose (DAC). DAC-SD-NA exhibited a remarkable "turn-on" fluorescence response to Al³⁺ in a wide pH range, and the fluorescence color of DAC-SD-NA solution turned from colorless to bright blue at the presence of Al³⁺ . The detection limit for Al³⁺ is computed to be 6.06×10^-7 m. The reaction mechanism of DAC-SD-NA towards Al³⁺ is confirmed by Job's plot, X-ray photoelectron spectroscopy, and density functional theory (DFT) calculations. In view of DAC-SD-NA exhibited good sensitivity and selectivity, it is applied to detect Al³⁺ in real water. What's more, DAC-SD-NA-loaded fluorescent hydrogel can serve as a convenient tool for the detection of Al³⁺ .

Effect of Reaction Media on Grafting Hydrophobic Polymers from Cellulose Nanocrystals via Surface-Initiated Atom-Transfer Radical Polymerization

Hydrophobic polymer-grafted cellulose nanocrystals (CNCs) were produced via surface-initiated atom-transfer radical polymerization (SI-ATRP) in two different solvents to examine the role of reaction media on the extent of surface modification. Poly(butyl acrylate)-grafted CNCs were synthesized in either dimethylformamide (DMF) (D-PBA-g-CNCs) or toluene (T-PBA-g-CNCs) alongside a free polymer from a sacrificial initiator. The colloidal stability of unmodified CNCs, initiator-modified CNCs, and PBA-g-CNCs in water, DMF, and toluene was evaluated by optical transmittance. The enhanced colloidal stability of initiator-modified CNCs in DMF led to improved accessibility to initiator groups during polymer grafting; D-PBA-g-CNCs had 30 times more grafted chains than T-PBA-g-CNCs, determined by thermogravimetric and elemental analysis. D-PBA-g-CNCs dispersed well in toluene and were hydrophobic with a water contact angle of 124° (for polymer grafts > 13 kDa) compared to 25° for T-PBA-g-CNCs. The cellulose crystal structure was preserved, and individual nanoparticles were retained when grafting was carried out in either solvent. This work highlights that optimizing CNC colloidal stability prior to grafting is more crucial than solvent-polymer compatibility to obtain high graft densities and highly hydrophobic CNCs via SI-ATRP.

Stimuli-responsive polymer-based systems for diagnostic applications

Stimuli-responsive polymers exhibit properties that make them ideal candidates for biosensing and molecular diagnostics. Through rational design of polymer composition combined with new polymer functionalization and synthetic strategies, polymers with myriad responsivities, e.g., responses to temperature, pH, biomolecules, CO2, light, and electricity can be achieved. When these polymers are specifically designed to respond to biomarkers, stimuli-responsive devices/probes, capable of recognizing and transducing analyte signals, can be used to diagnose and treat disease. In this review, we highlight recent state-of-the-art examples of stimuli-responsive polymer-based systems for biosensing and bioimaging.

Photochromic holo-cellulose wood-based aerogel grafted azobenzene derivative by SI-ATRP

Wood is actually a natural polymers composite that is easy to process, mainly constituted of cellulose, hemicellulose and lignin. However, most wood-based functional materials are prepared by physical methods, which undoubtedly limit the application of wood-based materials. Herein, the wood aerogel (WA) was obtained from wood by delignification and freezing dried. The WA then was fabricated into an unexpected photochromic wood aerogel (PWA) via surface-initiated atom transfer radical polymerization (SI-ATRP) covalently grafting poly{6-[4-(4-methoxyphenyl-azo)phenoxy]hexyl methacrylate} (PMAZOM). Both WA and PWA showed good compression resilience. The hydrophobicity of PWA was obviously enhanced because of the surface modification. The color of PWA can change from yellow to orange-red after being irradiated by UV light for 30 s. The color of sample can be reversibly changed to yellow under sunlight for 200 s. The lightweight and photosensitive wood aerogel is potential to apply for optical information storage materials and photosensitive devices.

Highly Hydrophobic, Homogeneous Suspension and Resin by Graft Copolymerization Modification of Cellulose Nanocrystal (CNC)

Cellulose nanocrystal (CNC) is a nanoscale colloid with superior potential for coatings, liquid crystal displays, and optoelectronics. However, to date, the presence of hydrophilicity still limits its application. Multifunction via graft copolymerization modification of CNC appears to be breaking into a new direction. In this study, we used the residual hydroxyl groups on the CNC to react with 2-bromoisobu-tyryl bromide, and the initiator was therefore anchored on the CNC surface. Through atom transfer radical polymerization (ATRP), CNC was successfully grafted to azobenzene monomer, i.e., 9-[4-[2-[4-(trifluorometh) phenyl] diazenyl] phenoxy] nonayl acrylate (FAZO). After a series of characterization methods, such as FTIR, NMR and XRD, it was found that the surface water contact angle of the CNC-PFAZO prepared by the modification was as high as 134.4°, and the high hydrophilicity of this material could be maintained for up to one month, even longer.

Theoretical insights into a colorimetric azo-based probe to detect copper ions

In the present study, a colorimetric azobenzene-based probe (AZO 1) was reported that exhibits high selectivity toward Cu²⁺ and undergoes a red to yellow colour change upon its detection. Density functional theory (DFT) calculations were carried out to investigate the mechanism of the probe discoloration. The differences in the binding energies of complexes of 2 : 1 and 1 : 1 stoichiometry indicated that a two-step complexation process takes place as the Cu²⁺ content increases. However, the calculated absorption spectra suggested that a significant colour change would only be observed for the 1 : 1 AZO 1 : Cu²⁺ complex. A HOMO–LUMO electronic transition was a key factor for the blue shift of the absorption bands of the probe. Further studies indicated that solvent molecules participate in the complexation and that the presence of the o-methoxy group in AZO 1 led to formation of an octahedral complex because of the additional chelating site. A significant change in the conformation of AZO 1, namely the rotation of the N,N-di(carboxymethyl)amino group around the N–C_Ar bond by approximately 90°, resulted in a larger HOMO–LUMO energy gap, and the corresponding alteration of the intramolecular charge transfer (ICT) from the N,N-di(carboxymethyl)amino group to the phenyl ring led to the observed colour change.

DFT calculations indicated that the rotation of the N,N-di(carboxymethyl)amino group around the N–CAr bond by approximately 90°, resulted in a larger HOMO–LUMO energy gap, and led to the observed colour change.

A new visible light and temperature responsive diblock copolymer

A visible light and temperature responsive diblock copolymer of poly[6-(2,6,2′,6′-tetramethoxy-4′-oxyazobenzene) hexyl methacrylate]-block-poly(N-isopropylacrylamide) (PmAzo-b-PNIPAM) was synthesized via RAFT polymerization by carefully tuning the polymerization conditions.

Preparation and characterization of a multistimuli-responsive photoluminescent monomer and its corresponding polymer

A novel multistimuli-responsive photo-luminescent monomer and its corresponding polymer were prepared.