Effect of Chain Structure on the Various Properties of the Copolymers of Fluorinated Norbornenes with Cyclooctene

Fluorinated polymers are attractive due to their special thermal, surface, gas separation, and other properties. In this study, new diblock, multiblock, and random copolymers of cyclooctene with two fluorinated norbornenes, 5-perfluorobutyl-2-norbornene and N-pentafluorophenyl-exo-endo-norbornene-5,6-dicarboximide, are synthesized by ring-opening metathesis copolymerization and macromolecular cross-metathesis in the presence of the first- to third-generation Grubbs' Ru-catalysts. Their thermal, surface, bulk, and solution characteristics are investigated and compared using differential scanning calorimetry, water contact angle measurements, gas permeation, and light scattering, respectively. It is demonstrated that they are correlated with the chain structure of the copolymers. The properties of multiblock copolymers are generally closer to those of diblock copolymers than of random ones, which can be explained by the presence of long blocks capable of self-organization. In particular, diblock and multiblock fluorine-imide-containing copolymers show a tendency to form micelles in chloroform solutions well below the overlap concentration. The results obtained may be of interest to a wide range of researchers involved in the design of functional copolymers.

Controlled Swelling of Monolithic Films as a Facile Approach to the Synthesis of UHMWPE Membranes

A new method of fabricating porous membranes based on ultra-high molecular weight polyethylene (UHMWPE) by controlled swelling of the dense film was proposed and successfully utilized. The principle of this method is based on the swelling of non-porous UHMWPE film in organic solvent at elevated temperatures, followed by its cooling and further extraction of organic solvent, resulting in the formation of the porous membrane. In this work, we used commercial UHMWPE film (thickness 155 μm) and o-xylene as a solvent. Either homogeneous mixtures of the polymer melt and solvent or thermoreversible gels with crystallites acting as crosslinks of the inter-macromolecular network (swollen semicrystalline polymer) can be obtained at different soaking times. It was shown that the porous structure and filtration performance of the membranes depended on the swelling degree of the polymer, which can be controlled by the time of polymer soaking in organic solvent at elevated temperature (106 °C was found to be the optimal temperature for UHMWPE). In the case of homogeneous mixtures, the resulting membranes possessed both large and small pores. They were characterized by quite high porosity (45-65% vol.), liquid permeance of 46-134 L m^-2 h^-1 bar^-1, a mean flow pore size of 30-75 nm, and a very high crystallinity degree of 86-89% at a decent tensile strength of 3-9 MPa. For these membranes, rejection of blue dextran dye with a molecular weight of 70 kg/mol was 22-76%. In the case of thermoreversible gels, the resulting membranes had only small pores located in the interlamellar spaces. They were characterized by a lower crystallinity degree of 70-74%, a moderate porosity of 12-28%, liquid permeability of up to 12-26 L m^-2 h^-1 bar^-1, a mean flow pore size of up to 12-17 nm, and a higher tensile strength of 11-20 MPa. These membranes demonstrated blue dextran retention of nearly 100%.

Design of Block-Copolymer Nanoporous Membranes for Robust and Safer Lithium-Ion Battery Separators

Lithium-ion batteries (LIBs) suffer from unsatisfied performance and safety risks mainly because of the separators. Herein, a block copolymer (BCP) composed of robust and electrolyte-affinitive polysulfone (PSF) and Li+-affinitive polyethylene glycol (PEG) is rationally designed to prepare a new type of LIB separator. The copolymer is subjected to selective swelling, producing nanoporous membranes with PEG chains enriched along the pore walls. Intriguingly, when used as LIB separators, thus-produced BCP membranes efficiently integrate the merits of both PSF and PEG chains, endowing the separators thermal resistance as high as 150 °C and excellent wettability. Importantly, the nanoporous separator is able to close the pores with a temperature of 125 °C, offering the battery a thermal shutdown function. The membrane exhibits ultrahigh electrolyte uptake up to 501% and a prominent ionic conductivity of 10.1 mS cm-1 at room temperature. Batteries assembled with these membranes show excellent discharge capacity and C-rate performance, outperforming batteries assembled from other separators including the extensively used Celgard 2400. This study demonstrates a facile strategy, selective swelling of block copolymer, to engineer high-performance and safer LIB separators, which is also applicable to produce advanced copolymer-based separators for other types of batteries.

Structural Analysis of Bottlebrush Block Copolymer Micelles Using Small-Angle X-ray Scattering

We present structural analysis of spherical diblock copolymer micelles where core blocks have bottlebrush architecture. The dependence of the core radius (R_core) and the corona thickness (L_corona) on the core block length (N_core) is investigated using small-angle X-ray scattering (SAXS) and discussed in terms of the stiffness of a core-forming polymer posed by its long fluoroalkyl side chains. The conformation of the core block is strongly stretched, and the measured exponents α and β from power-law correlations, R_core ∼ N_core^α and L_corona ∼ N_core^β, respectively, are greater than those from any scaling predictions for block copolymer micelles with a flexible, linear core-block. Such deviations are attributed to the appreciable chain stiffness of the bottlebrush core block, and a simple model is suggested to understand how the core block stiffness influences both the dimensions of core and corona.

Controlled Phase Separation in Poly( p-phenyleneethynylene) Thin Films and Its Relationship to Vapor-Sensing Properties

In this paper, we report the synthesis and mesoporous film formation of hydrophobic rodlike poly( p-phenyleneethynylene)s (PPEs) and present porosity-dependent quenching studies using 1,3,5-trinitrotoluene (TNT) vapors. Nonsolvent vapor-induced phase separation was used to induce pore formation during film casting, and the concentration of PPEs in the casting solution was controlled carefully to prevent excimer formation. We found that the structures of the sidechains of the PPEs strongly influence the range of relative humidity at which controlled pore generation occurs, which could be rationalized from interfacial energies calculated from contact angle measurements. Porosity of the PPE films resulted in increased efficiency of fluorescence quenching toward TNT vapors, which previously required very thin films (below 5 nm) for sensing applications. The control of the porous structure as well as film thickness constitutes a promising strategy for enhancing the efficiency of chemosensors and in more general applications requiring fine-tuned polymer-gas interactions.