Antibacterial polylactic acid fabricated via Pickering emulsion approach with polyethyleneimine and polydopamine modified cellulose nanocrystals as emulsion stabilizers

Antibacterial biodegradable plastics are highly demanded for food package and disposable medical plastic consumables. Incorporating antibacterial nanoagents into polymer matrices is an effective method to endow polymers with antibacterial activity. However, synthesis of sustainable antibacterial nanoagents with high antibacterial activity via facile approach and well dispersion of them in polymer matrices are still challenging. In this study, polyethyleneimine (PEI) was grafted on surface of cellulose nanocrystals (CNCs) via the oxidation self-polymerization of dopamine (DA) and the Michael addition/Schiff base reaction between DA and PEI. The resulted PEI and polydopamine modified CNCs (PPCs) showed substantially enhanced antibacterial activity and reduced cytotoxicity for NIH3T3 than PEI due to increased local concentration and anchoring of PEI. The minimum concentration of PPCs to achieve antibacterial rate of 99.99 % against S. aureus and E. coli were about 50 and 20 μg/mL, respectively. PPCs displayed outstanding emulsifying ability, and PPC coated polylactic acid (PLA) microspheres were obtained by drying PPC stabilized PLA Pickering emulsion, leading to a well dispersion of PPCs in PLA. PPC/PLA film prepared by hot-pressing displayed great antibacterial performance and enhanced mechanical properties. Therefore, this study proposed a facile approach to fabricate biocompatible antibacterial nanoagents and plastics.

Formulation and stabilization of high internal phase emulsions: Stabilization by cellulose nanocrystals and gelatinized soluble starch

In this work, high internal phase emulsions (HIPEs) stabilized by naturally derived cellulose nanocrystals (CNC) and gelatinized soluble starch (GSS) were fabricated to stabilize oregano essential oil (OEO) in the absence of surfactant. The physical properties, microstructures, rheological properties, and storage stability of HIPEs were investigated by adjusting CNC contents (0.2, 0.3, 0.4 and 0.5 wt%) and starch concentration (4.5 wt%). The results revealed that CNC-GSS stabilized HIPEs exhibited good storage stability within one month and the smallest droplets size at a CNC concentration of 0.4 wt%. The emulsion volume fractions of 0.2, 0.3, 0.4 and 0.5 wt% CNC-GSS stabilized HIPEs after centrifugation reached 77.58, 82.05, 94.22, and 91.41 %, respectively. The effect of native CNC and GSS were analyzed to understand the stability mechanisms of HIPEs. The results revealed that CNC could be used as an effective stabilizer and emulsifier to fabricate the stable and gel-like HIPEs with tunable microstructure and rheological properties.

Cellulose or chitin nanofibril-stabilized latex for medical adhesion via tailoring colloidal interactions

The objective of this research is to develop a functional medical adhesive from natural nanofibril-stabilized latex through an aqueous process. Surface charged cellulose or chitin nanofibrils are used to form Pickering emulsions of acrylic monomers, followed by in situ polymerization. Charged initiators are selected to tailor the interactions between them and nanofibrils, and it is found that the repulsive electrostatic interactions play a key role in stabilizing the heterogeneous system. As a result, poly(2-ethylhexyl acrylate-co-methyl methacrylate) latexes are successfully prepared for surfactant-free adhesives with a high shear strength of 72.0 ± 6.5 kPa. In addition, drug can be easily incorporated in the nanopaper substrate or adhesive layer to form a medical tape, exhibiting long-term drug release and antibacterial behaviors. We managed developing a facile method to integrate green synthesis, versatile functionalities and excellent adhesion into one adhesive, which remains a great challenge.

Polysaccharide-Based Nanoparticles as Pickering Emulsifiers in Emulsion Formulations and Heterogenous Polymerization Systems

Bio-based Pickering emulsifiers are a nontoxic alternative to surfactants in emulsion formulations and heterogenous polymerizations. Recent demand for biocompatible and sustainable formulations has accelerated academic interest in polysaccharide-based nanoparticles as Pickering emulsifiers. Despite the environmental advantages, the inherent hydrophilicity of polysaccharides and their nanoparticles limits efficiency and application range. Modification of the polysaccharide surface is often required in the development of ultrastable, functional, and water-in-oil (W/O) systems. Complex surface modification calls into question the sustainability of polysaccharide-based nanoparticles and is identified as a significant barrier to commercialization. This review summarizes the use of nanocelluloses, -starches, and -chitins as Pickering emulsifiers, highlights trends and best practices in surface modification, and provides recommendations to expedite commercialization.

Recent Developments in the Formulation and Use of Polymers and Particles of Plant-based Origin for Emulsion Stabilizations

The main scope of this Review was the recent progress in the use of plant-based polymers and particles for the stabilization of Pickering and non-Pickering emulsion systems. Due to their availability and promising performance, it was discussed how the source, modification, and formulation of cellulose, starch, protein, and lignin-based polymers and particles would impact their emulsion stabilization. Special attention was given toward the material synthesis in two forms of polymeric surfactants and particles and the corresponding formulated emulsions. Also, the effects of particle size, degree of aggregation, wettability, degree of substitution, and electrical charge in stabilizing oil/water systems and micro- and macro-structures of oil droplets were discussed. The wide range of applications using such plant-based stabilizers in different technologies as well as their challenge and future perspectives were described.

Green Hydrophilic Capsules from Cellulose Nanocrystal-Stabilized Pickering Emulsion Polymerization: Morphology Control and Spongelike Behavior

Pickering inverse emulsions of hydroxyl oligoethylene glycol methacrylate were stabilized in isopropyl myristate, a biofriendly oil, using surface-modified cellulose nanocrystals (CNCs) as stabilizing particles. The emulsions were further polymerized by free or controlled radical polymerization (ATRP), taking advantage of the bromoisobutyrate functions grafted on the CNC surface. Suspension polymerization of the emulsion led to full bead or empty capsule morphologies, depending on the initiation locus. The thickness of the CNC shell surrounding the polymerized emulsions could be tuned by modulating the aggregation state of the CNCs after their surface modification. An increase from 6 to 40 CNC layers helped improve the compression moduli of the beads from a dozen to hundreds of kPa.

Biocatalytic nanoparticles for the stabilization of degassed single electron transfer-living radical pickering emulsion polymerizations

Synthetic polymers are indispensable in many different applications, but there is a growing need for green processes and natural surfactants for emulsion polymerization. The use of solid particles to stabilize Pickering emulsions is a particularly attractive avenue, but oxygen sensitivity has remained a formidable challenge in controlled polymerization reactions. Here we show that lignin nanoparticles (LNPs) coated with chitosan and glucose oxidase (GOx) enable efficient stabilization of Pickering emulsion and in situ enzymatic degassing of single electron transfer-living radical polymerization (SET-LRP) without extraneous hydrogen peroxide scavengers. The resulting latex dispersions can be purified by aqueous extraction or used to obtain polymer nanocomposites containing uniformly dispersed LNPs. The polymers exhibit high chain-end fidelity that allows for production of a series of well-defined block copolymers as a viable route to more complex architectures.

Nanocellulose: From Fundamentals to Advanced Applications

Over the past few years, nanocellulose (NC), cellulose in the form of nanostructures, has been proved to be one of the most prominent green materials of modern times. NC materials have gained growing interests owing to their attractive and excellent characteristics such as abundance, high aspect ratio, better mechanical properties, renewability, and biocompatibility. The abundant hydroxyl functional groups allow a wide range of functionalizations via chemical reactions, leading to developing various materials with tunable features. In this review, recent advances in the preparation, modification, and emerging application of nanocellulose, especially cellulose nanocrystals (CNCs), are described and discussed based on the analysis of the latest investigations (particularly for the reports of the past 3 years). We start with a concise background of cellulose, its structural organization as well as the nomenclature of cellulose nanomaterials for beginners in this field. Then, different experimental procedures for the production of nanocelluloses, their properties, and functionalization approaches were elaborated. Furthermore, a number of recent and emerging uses of nanocellulose in nanocomposites, Pickering emulsifiers, wood adhesives, wastewater treatment, as well as in new evolving biomedical applications are presented. Finally, the challenges and opportunities of NC-based emerging materials are discussed.

Synthesis of cellulose nanocrystals-armored fluorinated polyacrylate latexes via Pickering emulsion polymerization and their film properties

Cellulose nanocrystals-armored fluorinated polyacrylate latex particles with the core-shell spherical shape were prepared by a facile and efficient strategy based on Pickering emulsion polymerization using the modified cellulose nanocrystals, poly(2-(dimethylamino) ethyl methacrylate)-g-cellulose nanocrystal-g-poly(2,2,3,4,4,4-hexafluorobutyl acrylate) (PDMAEMA-g-CNC-g-PHFBA) as a sole Pickering stabilizer. The TEM result indicated that PDMAEMA-g-CNC-g-PHFBA effectively anchored on the outside of latex particles and improved the performance of emulsions, demonstrating the important role of the PDMAEMA-g-CNC-g-PHFBA in the Pickering stabilization process. The influences of the type of Pickering stabilizers and the PDMAEMA-g-CNC-g-PHFBA amount on the emulsion polymerization were investigated. The size of latex particles could be adjusted by PDMAEMA-g-CNC-g- PHFBA amount. XPS result showed that the fluorine-containing groups tended to enrich at the air-film interface of latex film during the heat process, leading to the decrease of surface free energy. The water-oil repellent and mechanical properties of the film could be improved as the content of PDMAEMA-g-CNC-g-PHFBA increased. In addition, thermal analysis showed an enhancement of the thermal properties of latex film upon increasing the PDMAEMA-g-CNC-g-PHFBA content.

Linking Film Structure and Mechanical Properties in Nanocomposite Films Formed from Dispersions of Cellulose Nanocrystals and Acrylic Latexes

Cellulose nanocrystals (CNCs) are unique, lightweight materials that possess high elastic modulus and tensile strength, making them of great interest in the formation of nanocomposite materials. However, efficient design of the composite material is essential in translating the mechanical properties of the individual CNCs into the nanocomposite film. In this work, we demonstrate the formation of structured CNC/acrylic dispersions by physical blending of the anionic CNCs with charged acrylic latex particles. By blending with large cationic latex particles, the CNCs adsorbed onto the acrylic latex surface while blending with small latex particles led to the inverse structure. Films were cast from these dispersions and the physical properties were compared with the aim of understanding the influence of the initial structure of the hybrid dispersion on the structure of the final film. A significant difference in the mechanical properties was observed based on the position of the CNCs in the initial dispersion. Adsorption of latex particles onto the CNC surface led to a random distribution of nonconnected CNCs, which contributed little to improving the Young's modulus, while adsorption of CNC onto the latex led to a honeycomb CNC network and a large increase in the Young's modulus. This work underlines the importance of particle structure on the structure and mechanical properties of nanostructured films.

Starch nanoparticles modified with styrene oxide and their use as Pickering stabilizers

Starch nanoparticles (SNP) were modified with styrene oxide (STO) and successfully used as Pickering stabilizers in miniemulsion and emulsion polymerization.

Polymeric hollow microcapsules (PHM) via cellulose nanocrystal stabilized Pickering emulsion polymerization

A practical and sustainable method to prepare polymeric hollow microcapsules (PHMs) using cellulose nanocrystal (CNC) stabilized Pickering emulsion polymerization was developed. Pristine CNCs hydrolyzed from wood pulp are hydrophilic and could be employed as emulsifiers to prepare oil-in-water (O/W) Pickering emulsions. The O/W Pickering emulsions were used as templates for the Pickering emulsion polymerization of hydrophobic monomers inside the emulsion droplets. The crosslinked hydrophobic polymers phase separated and partitioned to the interface of the Pickering emulsion, leading to the formation of hydrophobic PHMs. Correspondingly, cinnamate modified CNCs with less surface hydrophilicity were employed as emulsifiers to obtain water-in-oil (W/O) inverse Pickering emulsions, which were then used as templates for inverse Pickering emulsion polymerization of hydrophilic monomers to prepare hydrophilic PHMs. Therefore, both hydrophobic and hydrophilic PHMs could be obtained via this approach. Herein, polystyrene, poly(4-vinylpyridine), and poly(N-isopropyl acrylamide) hollow microcapsules were prepared as models, where the size, crosslinking density, shell structure and stimuli-responsive properties of PHMs could be tuned by varying the synthesis parameters.

Synthesis of cellulose nanocrystal armored latex particles for mechanically strong nanocomposite films

Mechanically strong films are generated from cellulose nanocrystal armored latex particles synthesized by emulsion polymerization.

Convenient Synthesis of Hybrid Polymer Materials by AGET-ATRP Polymerization of Pickering Emulsions Stabilized by Cellulose Nanocrystals Grafted with Reactive Moieties

We report a novel method to prepare capsules, beads, or open-cell materials from Pickering emulsions of monomers, stabilized by cellulose nanocrystals (CNCs) grafted with reactive isobutyrate bromide moieties (CNC-Br). CNC-Br particles with different hydrophilic/hydrophobic balance at their surface were prepared and subsequently used to stabilize direct (O/W), inverted (W/O), or double emulsions of styrene or n-BuA. The different emulsions obtained were subsequently polymerized, by initiating an AGET-ATRP polymerization from the brominated particles surrounding the stabilized droplets. The different hybrid polymer materials obtained were subsequently characterized, and the impact of the CNCs functionalization and polymerization conditions was particularly discussed.