Preparation of Block Copolymer Self-Assemblies via Pisa in a Non-Polar Medium Based on RCMP

Polymerization-induced self-assembly (PISA) is conducted in a non-polar medium (n-dodecane) via reversible complexation-mediated polymerization (RCMP). Stearyl methacrylate (SMA) is used to synthesize a macroinitiator, and subsequent block polymerization of benzyl methacrylate (BzMA) from the macroinitiator in n-dodecane afforded a PSMA-PBzMA block copolymer, where PSMA is poly(stearyl methacrylate) and PBzMA is poly(benzyl methacrylate). Because PSMA is soluble but PBzMA is insoluble in n-dodecane, the block copolymer formed a self-assembly during the block polymerization (PISA). Spherical micelles, worms, and vesicles are obtained, depending on the degrees of polymerization of PSMA and PBzMA. "One-pot" PISA is also attained; namely, BzMA is directly added to the reaction mixture of the macroinitiator synthesis, and PISA is conducted in the same pot without purification of the macroinitiator. The spherical micelle and vesicle structures are also fixed using a crosslinkable monomer during PISA. RCMP-PISA is highly attractive as it is odorless and metal-free. The "one-pot" synthesis does not require the purification of the macroinitiator. RCMP-PISA can provide a practical approach to synthesize self-assemblies in non-polar media.

Further Improvement Based on Traditional Nanocapsule Preparation Methods: A Review

Nanocapsule preparation technology, as an emerging technology with great development prospects, has uniqueness and superiority in various industries. In this paper, the preparation technology of nanocapsules was systematically divided into three categories: physical methods, chemical methods, and physicochemical methods. The technological innovation of different methods in recent years was reviewed, and the mechanisms of nanocapsules prepared via emulsion polymerization, interface polymerization, layer-by-layer self-assembly technology, nanoprecipitation, supercritical fluid, and nano spray drying was summarized in detail. Different from previous reviews, the renewal iteration of core-shell structural materials was highlighted, and relevant illustrations of their representative and latest research results were reviewed. With the continuous progress of nanocapsule technology, especially the continuous development of new wall materials and catalysts, new preparation technology, and new production equipment, nanocapsule technology will be used more widely in medicine, food, cosmetics, pesticides, petroleum products, and many other fields.

Microwave Irradiation-Assisted Reversible Addition-Fragmentation Chain Transfer Polymerization-Induced Self-Assembly of pH-Responsive Diblock Copolymer Nanoparticles

Herein, we present a versatile platform for the synthesis of pH-responsive poly([N-(2-hydroxypropyl)]methacrylamide)-b-poly[2-(diisopropylamino)ethyl methacrylate] diblock copolymer (PHPMA-b-PDPA) nanoparticles (NPs) obtained via microwave-assisted reversible addition-fragmentation chain transfer polymerization-induced self-assembly (MWI-PISA). The N-(2-hydroxypropyl) methacrylamide (HPMA) monomer was first polymerized to obtain a macrochain transfer agent with polymerization degrees (DPs) of 23 and 51. Subsequently, using mCTA and 2-(diisopropylamino)ethyl methacrylate (DPA) as monomers, we successfully conducted MWI-PISA emulsion polymerization in aqueous solution with a solid content of 10 wt %. The NPs were obtained with high monomer conversion and polymerization rates. The resulting diblock copolymer NPs were analyzed by dynamic light scattering (DLS) and cryogenic-transmission electron microscopy (cryo-TEM). cryo-TEM studies reveal the presence of only NPs with spherical morphology such as micelles and polymer vesicles known as polymersomes. Under the selected conditions, we were able to fine-tune the morphology from micelles to polymersomes, which may attract considerable attention in the drug-delivery field. The capability for drug encapsulation using the obtained in situ pH-responsive NPs, the polymersomes based on PHPMA₂₃-b-PDPA₁₀₀, and the micelles based on PHPMA₅₁-b-PDPA₁₀₀ was demonstrated using the hydrophobic agent and fluorescent dye as Nile red (NR). In addition, the NP disassembly in slightly acidic environments enables fast NR release.

Reverse Sequence Polymerization-Induced Self-Assembly in Aqueous Media

We report a new aqueous polymerization-induced self-assembly (PISA) formulation that enables the hydrophobic block to be prepared first when targeting diblock copolymer nano-objects. This counter-intuitive reverse sequence approach uses an ionic reversible addition-fragmentation chain transfer (RAFT) agent for the RAFT aqueous dispersion polymerization of 2-hydroxypropyl methacrylate (HPMA) to produce charge-stabilized latex particles. Chain extension using a water-soluble methacrylic, acrylic or acrylamide comonomer then produces sterically stabilized diblock copolymer nanoparticles in an aqueous one-pot formulation. In each case, the monomer diffuses into the PHPMA particles, which act as the locus for the polymerization. A remarkable change in morphology occurs as the ≈600 nm latex is converted into much smaller sterically stabilized diblock copolymer nanoparticles, which exhibit thermoresponsive behavior. Such reverse sequence PISA formulations enable the efficient synthesis of new functional diblock copolymer nanoparticles.

RAFT-mediated polymerization-induced self-assembly (RAFT-PISA): current status and future directions

Polymerization-induced self-assembly (PISA) combines polymerization and self-assembly in a single step with distinct efficiency that has set it apart from the conventional solution self-assembly processes. PISA holds great promise for large-scale production, not only because of its efficient process for producing nano/micro-particles with high solid content, but also thanks to the facile control over the particle size and morphology. Since its invention, many research groups around the world have developed new and creative approaches to broaden the scope of PISA initiations, morphologies and applications, etc. The growing interest in PISA is certainly reflected in the increasing number of publications over the past few years, and in this review, we aim to summarize these recent advances in the emerging aspects of RAFT-mediated PISA. These include (1) non-thermal initiation processes, such as photo-, enzyme-, redox- and ultrasound-initiation; the achievements of (2) high-order structures, (3) hybrid materials and (4) stimuli-responsive nano-objects by design and adopting new monomers and new processes; (5) the efforts in the realization of upscale production by utilization of high throughput technologies, and finally the (6) applications of current PISA nano-objects in different fields and (7) its future directions.

Self-catalyzed synthesis of a nano-capsule and its application as a heterogeneous RCMP catalyst and nano-reactor

A nano-capsule synthesized via self-catalyzed RCMP and its use as a heterogeneous catalyst and a nano-reactor of RCMP to generate a multi-elemental particle.

Encapsulation of volatile compounds in liquid media: Fragrances, flavors, and essential oils in commercial formulations

The first marketed example of the application of microcapsules dates back to 1957. Since then, microencapsulation techniques and knowledge have progressed in a plethora of technological fields, and efforts have been directed toward the design of progressively more efficient carriers. The protection of payloads from the exposure to unfavorable environments indeed grants enhanced efficacy, safety, and stability of encapsulated species while allowing for a fine tuning of their release profile and longer lasting beneficial effects. Perfumes or, more generally, active-loaded microcapsules are nowadays present in a very large number of consumer products. Commercial products currently make use of rigid, stable polymer-based microcapsules with excellent release properties. However, this type of microcapsules does not meet certain sustainability requirements such as biocompatibility and biodegradability: the leaking via wastewater contributes to the alarming phenomenon of microplastic pollution with about 4% of total microplastic in the environment. Therefore, there is a need to address new issues which have been emerging in relation to the poor environmental profile of such materials. The progresses in some of the main application fields of microencapsulation, such as household care, toiletries, cosmetics, food, and pesticides are reviewed herein. The main technologies employed in microcapsules production and the mechanisms underlying the release of actives are also discussed. Both the advantages and disadvantages of every technique have been considered to allow a careful choice of the most suitable technique for a specific target application and prepare the ground for novel ideas and approaches for encapsulation strategies that we expect to be proposed within the next years.

Direct Access to Polysaccharide-Based Vesicles with a Tunable Membrane Thickness in a Large Concentration Window via Polymerization-Induced Self-Assembly

Polymersomes are multicompartmental vesicular nano-objects obtained by self-assembly of amphiphilic copolymers. When prepared in the aqueous phase, they are composed of a hydrophobic bilayer enclosing water. Although such fascinating polymeric nano-objects have been widely reported with synthetic block copolymers, their formation from polysaccharide-based copolymers remains a significant challenge. In the present study, the powerful platform technology known as polymerization-induced self-assembly was used to prepare in situ pure vesicles from a polysaccharide-grafted copolymer: dextran-g-poly(2-hydroxypropyl methacrylate) (Dex-g-PHPMA). The growth of the PHPMA grafts was performed with a dextran-based macromolecular chain transfer agent in water at 20 °C using photomediated reversible addition fragmentation chain transfer polymerization at 405 nm. Transmission electron microscopy, cryogenic electron microscopy, small-angle X-ray scattering, atomic force microscopy, and dynamic light scattering revealed that amphiphilic Dex-g-PHPMA_{X = 100-300} (X is the targeted average degree of polymerization, X_n̅, of each graft at full conversion) exhibit remarkable self-assembly behavior. On the one hand, vesicles were obtained over a wide range of solid concentrations (from 2.5% to 13.5% w/w), which can facilitate posterior targeting of such rare morphology. On the other hand, the extension of X_n̅ induces an increase in the vesicle membrane thickness, rather than a morphological evolution (spherical micelles to cylinders to vesicles).

Polymerisation-induced self-assembly (PISA) as a straightforward formulation strategy for stimuli-responsive drug delivery systems and biomaterials: recent advances

Stimuli-responsive amphiphilic block copolymers have emerged as promising nanocarriers for enhancing site-specific and on-demand drug release in response to a range of stimuli such as pH, the presence of redox agents, and temperature. The formulation of amphiphilic block copolymers into polymeric drug-loaded nanoparticles is typically achieved by various methods (e.g. oil-in-water emulsion solvent evaporation, solid dispersion, microphase separation, dialysis or microfluidic separation). Despite much progress that has been made, there remain many challenges to overcome to produce reliable polymeric systems. The main drawbacks of the above methods are that they produce very low solid contents (<1 wt%) and involve multiple-step procedures, thus limiting their scope. Recently, a new self-assembly methodology, polymerisation-induced self-assembly (PISA), has shown great promise in the production of polymer-derived particles using a straightforward one-pot approach, whilst facilitating high yield, scalability, and cost-effectiveness for pharmaceutical industry protocols. We therefore focus this review primarily on the most recent studies involved in the design and preparation of PISA-generated nano-objects which are responsive to specific stimuli, thus providing insight into how PISA may become an effective formulation strategy for the preparation of precisely tailored drug delivery systems and biomaterials, while some of the current challenges and limitations are also critically discussed.

Creation of polymeric nanostructures by living coordination block copolymerization of allene derivatives with fluoroalkyl substituents under polymerization-induced self-assembly conditions and their application to superhydrophobic surfaces

Block copolymer micelles with a fluorous corona were synthesized via living allene polymerization in fluorous media and a polymerization-induced self-assembly (PISA) process, resulting in excellent superhydrophobic optically transparent coatings.

Reduction-responsive double hydrophilic block copolymer nano-capsule synthesized via RCMP-PISA

Double hydrophilic block copolymer vesicles synthesized via RCMP-PISA are degradable under a reductive conditions.

Aqueous emulsion polymerizations of methacrylates and styrene via reversible complexation mediated polymerization (RCMP)

Aqueous emulsion polymerization via reversible complexation mediated living radical polymerization yielded low-dispersity poly(methyl methacrylate)s and polystyrenes.

Synthesis of nano-capsules via aqueous emulsion RCMP-PISA and encapsulation

Synthesis of nano-capsules using aqueous RCMP-PISA and encapsulation of rhodamine-B (Rh-B).

Reversible-deactivation radical polymerization of cyclic ketene acetals

This review discusses the history of reversible-deactivation radical ring-opening polymerization of cyclic ketene acetals, focusing on the preparation of degradable complex polymeric architectures.

Polymerization techniques in polymerization-induced self-assembly (PISA)

The development of controlled/“living” polymerization greatly stimulated the prosperity of the fabrication and application of block copolymer nano-objects.

Cross-linking approaches for block copolymer nano-assemblies via RAFT-mediated polymerization-induced self-assembly

This minireview summarizes the current cross-linking approaches to stabilize block copolymer nano-assemblies obtained via RAFT-mediated PISA process.

Recent development in halogen-bonding-catalyzed living radical polymerization

The development and applications of an organocatalyzed living radical polymerization via halogen-bonding catalysis, i.e., reversible complexation mediated polymerization (RCMP), are highlighted.

Cationic quaternary ammonium salt-catalyzed LED-induced living radical polymerization within situhalogen exchange

Cationic quaternary ammonium salts were employed as organocatalysts for light-emitting diode (LED)-induced living radical polymerization (LRP) with thein situhalogen exchange of methacrylate monomers.

Photocontrolled Iodine-Mediated Green Reversible-Deactivation Radical Polymerization of Methacrylates: Effect of Water in the Polymerization System

Photocontrolled iodine-mediated reversible-deactivation radical polymerization (RDRP) is a facile and highly efficient access to precision polymers. Herein, a facile photocontrolled iodine-mediated green RDRP strategy was successfully established in water by using 2-iodo-2-methylpropionitrile (CP-I) as the initiator and water-soluble functional monomers including poly(ethylene glycol) methyl ether methacrylate (PEGMA), 2-hydroxyethyl methacrylate (HEMA), and 2-hydroxypropyl methacrylate (HPMA) as the model monomers under blue-light-emitting diode (LED) irradiation at room temperature. Well-defined polymers (PPEGMA, PHEMA, PHPMA) with narrow polydispersities (1.09-1.21) were obtained, and amphiphilic block copolymers which can form nanospheres in situ in water (PPEGMA-b-poly(benzyl methacrylate) (PPEGMA-b-PBnMA) and PPEGMA-b-PHPMA) were prepared. To explore the role of water in our polymerization, control experiments were successfully carried out by using oil-soluble monomer methyl methacrylate (MMA) with the help of trace amounts of water. Notably, the green solvent-water-has an additionally positive effect in accelerating the polymerization and makes our polymerization system an environmentally friendly polymerization system. Therefore, this simple strategy conducted in the presence of water enables the green preparation of well-defined water-soluble or water-insoluble polymers and clean synthesis of amphiphilic copolymer nanoparticles in situ.

Emerging Trends in Polymerization-Induced Self-Assembly

In this Perspective, we summarize recent progress in polymerization-induced self-assembly (PISA) for the rational synthesis of block copolymer nanoparticles with various morphologies. Much of the PISA literature has been based on thermally initiated reversible addition-fragmentation chain transfer (RAFT) polymerization. Herein, we pay particular attention to alternative PISA protocols, which allow the preparation of nanoparticles with improved control over copolymer morphology and functionality. For example, initiation based on visible light, redox chemistry, or enzymes enables the incorporation of sensitive monomers and fragile biomolecules into block copolymer nanoparticles. Furthermore, PISA syntheses and postfunctionalization of the resulting nanoparticles (e.g., cross-linking) can be conducted sequentially without intermediate purification by using various external stimuli. Finally, PISA formulations have been optimized via high-throughput polymerization and recently evaluated within flow reactors for facile scale-up syntheses.

Iodine-mediated reversible-deactivation radical polymerization: a powerful strategy for polymer synthesis

In this review, the recent progress in iodine-mediated reversible-deactivation radical polymerization (RDRP) is highlighted.

LED-induced controlled radical polymerization with an in situ bromine–iodine transformation and block polymerization combined with ring-opening polymerization using one organocatalyst

Organocatalysts were employed in LED-induced controlled radical polymerization, sequentially combined with ring-opening polymerization to obtain copolymers using one organocatalyst.