Rice powder template for hausmannite Mn3O4 nanoparticles and its application to aqueous zinc ion battery

In this study, a simple calcination route was adopted to prepare hausmannite Mn3O4 nanoparticles using rice powder as soft bio-template. Prepared Mn3O4 was characterized by Fourier Transform Infra-Red Spectroscopy (FTIR), Field Emission Scanning Electron Microscopy (FESEM), Energy Dispersive X-ray microanalysis (EDX), Powder X-Ray Diffraction (XRD), Transmission Electron Microscopy (TEM), Brunauer-Emmett-Teller (BET) and Solid state UV-Vis spectroscopic techniques. Mn-O stretching in tetrahedral site was confirmed by FTIR and Raman spectra. % of Mn and O content supported Mn3O4 formation. The crystallinity and grain size was found to be 68.76% and 16.43 nm, respectively; tetragonal crystal system was also cleared by XRD. TEM clarified the planes of crystal formed which supported the XRD results and BET demonstrated mesoporous nature of prepared Mn3O4 having low pore volume. Low optical band gap of 3.24 eV of prepared Mn3O4 nanoparticles indicated semiconductor property and was used as cathode material to fabricate CR-2032 coin cell of Aqueous Rechargeable Zinc Ion Battery (ARZIB). A reversible cyclic voltammogram (CV) showed good zinc ion storage performance. Low cell resistance was confirmed by Electrochemical Impedance Spectroscopy (EIS). The coin cell delivered high specific discharge capacity of 240.75 mAhg-1 at 0.1 Ag-1 current density. The coulombic efficiency was found to be 99.98%. It also delivered excellent capacity retention 94.45% and 64.81% after 300 and 1000 charge-discharge cycles, respectively. This work offers a facile and cost effective approach for preparing cathode material of ARZIBs.

Polyaniline coated MOF-derived Mn2O3 nanorods for efficient hybrid capacitive deionization

Mn-based oxides are efficient pseudocapacitive electrode materials and have been investigated for capacitive deionization (CDI). However, their poor conductivity seriously affects their desalination performance. In this work, polyaniline coated Mn₂O₃ nanorods (PANI/Mn₂O₃) are synthesized by oxidizing a Mn-based metal organic framework (MOF) and subsequent in-situ chemical polymerization. The polyaniline not only acts as a conductive network for faradaic reactions of Mn₂O₃, but also enhances the desalination rate. PANI/Mn₂O₃ has a specific capacitance of 87 F g^-1 (at 1 A g^-1), superior to that of Mn₂O₃ nanorod (52 F g^-1 at 1 A g^-1). The hybrid CDI cell constructed with a PANI/Mn₂O₃ cathode and an active carbon anode shows a high desalination capacity of 21.6 mg g^-1, superior recyclability with only 11.3% desalination capacity decay after 30 desalination cycles and fast desalination rate of 2.2 mg g^-1 min^-1. PANI/Mn₂O₃ is a potential candidate for high performance CDI applications.

Controllable synthesis of Na, K-based titanium oxide nanoribbons as functional electrodes for supercapacitors and separation of aqueous ions

By facile controllable preparation, as-synthesized NTO and KTO exhibit remarkable electrochemical behavior for the applications of supercapacitors and capacitive deionization.

Controllable Design and Preparation of Hollow Carbon-Based Nanotubes for Asymmetric Supercapacitors and Capacitive Deionization

Carbon-based materials are important desirable materials in areas such as supercapacitors and capacitive deionization. However, traditional commercial materials are heterogeneous and prone to agglomeration in nanoscale and have structural limitation of electrochemical and desalination performance due to poor transport channels and low capacitance of prepared electrodes. Here, we introduce the facile strategy for controllable preparation of two types of hollow carbon-based nanotubes (HCTs) with amorphous mesoporous structures, which are synthesized by employing a MnO₂ linear template method and calcination of polymer precursors. The porous N-doped HCT (NHCT) shows a specific capacitance of 412.6 F g^-1 (1 A g^-1), with 77.3% rate capability (20 A g^-1). The fabricated asymmetric MnO₂//NHCT supercapacitor displays the energy density of 55.8 Wh kg^-1 at a power density of 803.9 W kg^-1. Furthermore, two typical MnO₂//HCT and MnO₂//NHCT devices both show the selective desalination performance of sulfate, and the MnO₂//NHCT device possesses a high deionization value of 11.37 mg g^-1 (500 mg L^-1 Na₂SO₄). These fabricated hollow carbon-based architectures with functional characteristics promise potential applications in energy and environmental related fields.

Agar Hydrogel Template Synthesis of Mn₃O₄ Nanoparticles through an Ion Diffusion Method Controlled by Ion Exchange Membrane and Electrochemical Performance

A novel strategy, ion diffusion method controlled by ion exchange membrane combining with agar hydrogel template, was reported for the synthesis of Mn₃O₄ nanoparticles without any oxidizing agents. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and Brunauere-Emmette-Teller (BET) isotherm were carried out to characterize the structure, morphology, pore size and distribution and specific surface area of the as-prepared nanomaterials. It is shown that the morphology and size of Mn₃O₄ nanoparticles can be controlled by the concentration of agar hydrogel. All the specific capacitances of the Mn₃O₄ samples prepared with agar hydrogel template are much higher than that of Mn₃O₄ prepared without any template agent. The Mn₃O₄ sample prepared at 1.5 g L-1 of agar hydrogel solution exhibits a highest specific capacitance of 183.0 F g-1 at the current density of 0.5 A g-1, which is increased by 293% compared with that of Mn₃O₄ synthesized without any template agent. The results indicate that the ion diffusion method controlled by ion exchange membrane combining with agar hydrogel template is a convenient and effective approach for preparing inorganic nanomaterials.