Exploring ligand-centered electrocatalytic H2O reduction: hydrogen generation with a soluble Ni(II) octabutoxyphthalocyanine complex

A nickel(II) octabutoxyphthalocyanine complex demonstrating ligand-centered redox activity and pH dependence is reported and investigated as an electrocatalyst for hydrogen evolution from water. Spectro- and electrochemical methods were implemented to further elucidate the nature of the pH dependence and catalytic mechanism.

Hydrogen evolution driven by heteroatoms of bidentate N-heterocyclic ligands in iron(II) complexes

While Pt is considered the best catalyst for the electrocatalytic hydrogen evolution reaction (HER), it is evident that non-noble metal alternatives must be explored. In this regard, it is well known that the binding sites for non-noble metals play a pivotal role in facilitating efficient catalysis. Herein, we studied Fe(II) complexes with bidentate 2-(2'-pyridyl)benzoxazole (LO), 2-(2'-pyridyl)benzthiazole (LS), 2-(2'-pyridyl)benzimidazole (LNH), and 2-2'-bipyridyl (Lpy) ligands - by adding trifluoroacetic acid (TFA) to their acetonitrile solution - in order to examine how their reactivity towards protons under reductive conditions could be impacted by the non-coordinating heteroatoms (S, O, N, or none). By applying this ligand series, we found that the reduction potentials relevant for HER correlate with ligand basicity in the presence of TFA. Moreover, DFT calculations underlined the importance of charge distribution in the ligand-based LUMO and LUMO+1 orbitals of the complexes, dependent on the heterocycle. Kinetic studies and controlled potential electrolysis - using TFA as a proton source - revealed HER activities for the complexes with LNH, LO, and LS of kobs = 0.03, 1.1, and 10.8 s-1 at overpotentials of 0.81, 0.76, and 0.79 V, respectively, and pointed towards a correlation between the kinetics of the reaction and the non-coordinating heteroatoms of the ligands. In particular, the activity was associated with the [Fe(LS/O/NH)2(S)2]2+ form (S = solvent or substrate molecule), and the rate-determining step involved the formation of [Fe(H-H)]+, during the weakening of Fe-H and CF3CO2-H bonds, according to the experimental and DFT results.

Unsymmetric Co-Facial "Salixpyrrole" Hydrogen Evolution Catalysts: Two Metals are Better than One

Designing ligand architectures that can mimic enzyme active sites is a promising approach for developing efficient small molecule activation catalysts for sustainable energy applications. Some key design features include chemically distinct binding pockets for multiple metal centers and a three-dimensional structure that controls the positioning of catalytic sites. With these principles in mind, mono- and bimetallic unsymmetric cofacial palladium complexes, 2 and 3, respectively, bearing ligands with calixpyrrole and salen coordination sites, or "salixpyrrole" ligands, are reported. These species were accessed in a straightforward Schiff-base reaction with appreciable yields. In addition, both 2 and 3 were found to be active hydrogen evolution electrocatalysts using para-toluenesulfonic acid monohydrate as the proton source. The two salixpyrrole species displayed different mechanisms of action, with 2 showing a second-order dependence on acid concentration, whereas 3 exhibited a first-order dependence. Moreover, the bimetallic catalyst was significantly more efficient, with higher turnover frequencies, 4640 s-1 vs 1680 s-1 for 2, and lower overpotentials, 0.39 V vs 0.69 V for 2. The results reported herein provide proof-of-concept that bimetallic catalysts with chemically distinct binding sites demonstrate enhanced catalytic properties in comparison to monometallic or symmetric analogues.

Electroreductive alkylations of (hetero)arenes with carboxylic acids

Carboxylic acids are widely available and generally inexpensive from abundant biomass feedstocks, and they are suitable and generic coupling partners in synthetic chemistry. Reported herein is an electroreductive coupling of stable and versatile carboxylic acids with (hetero)arenes using protons as the hydrogen source. The application of an earth-abundant titanium catalyst has significantly improved the deoxygenative reduction process. Preliminary mechanistic studies provide insights into the deoxygenative reduction of in-situ generated ketone pathway, and the intermediacy generation of ketyl radical and alkylidene titanocene. Without the necessity of pressurized hydrogen or stoichiometric hydride as reductants, this protocol enables highly selective and straightforward synthesis of various functionalized and structurally diverse alkylbenzenes under mild conditions. The utility of this reaction is further demonstrated through practical and valuable isotope incorporation from readily available deuterium source.

Electrohydrogenation of Nitriles with Amines by Cobalt Catalysis

Catalytic hydrogenation of nitriles represents an efficient and sustainable one-step synthesis of valuable bulk and fine chemicals. We report herein a molecular cobalt electrocatalyst for selective hydrogenative coupling of nitriles with amines using protons as the hydrogen source. The key to success for this reductive reaction is the use of an electrocatalytic approach for efficient cobalt-hydride generation through a sequence of cathodic reduction and protonation. As only electrons (e- ) and protons (H+ ) as the redox equivalent and hydrogen source, this general electrohydrogenation protocol is showcased by highly selective and straightforward synthesis of various functionalized and structurally diverse amines, as well as deuterium isotope labeling applications. Mechanistic studies reveal that the electrogenerated cobalt-hydride transfer to nitrile process is the rate-determining step.

Metal-Tuned Ligand Reactivity Enables CX2 (X = O, S) Homocoupling with Spectator Cu Centers

Ligand non-innocence is ubiquitous in catalysis with ligands in synthetic complexes contributing as electron reservoirs or co-sites for substrate activation. The latter chemical non-innocence is manifested in H+ storage or relay at sites beyond the metal primary coordination sphere. Reaction of a competent CO2-to-oxalate reduction catalyst, namely, [K(THF)3](Cu3SL), where L3- is a tris(β-diketiminate) cyclophane, with CS2 affords tetrathiooxalate at long reaction times or at high CS2 concentrations, where otherwise an equilibrium is established between the starting species and a complex-CS2 adduct in which the CS2 is bound to the C atom on the ligand backbone. X-ray diffraction analysis of this adduct reveals no apparent metal participation, suggesting an entirely ligand-based reaction controlled by the charge state of the cluster. Thermodynamic parameters for the formation of the aforementioned Cligand-CS2 bond were experimentally determined, and trends with cation Lewis acidity were studied, where more acidic cations shift the equilibrium toward the adduct. Relevance of such an adduct in the reduction of CO2 to oxalate by this complex is supported by DFT studies, similar effects of countercation Lewis acidity on product formation, and the homocoupled heterocumulene product speciation as determined by isotopic labeling studies. Taken together, this system extends chemical non-innocence beyond H+ to effect catalytic transformations involving C-C bond formation and represents the rarest example of metal-ligand cooperativity, that is, spectator metal ion(s) and the ligand as the reaction center.

Ligand-Centered Photocatalytic Hydrogen Production in an Axially Capped Rh2(II,II) Paddlewheel Complex with Red Light

A new series of Rh2(II,II) complexes with the formula cis-[Rh2(DTolF)2(bpnp)(L)]2+, where bpnp = 2,7-bis(2-pyridyl)-1,8-naphthyridine, DTolF = N,N'-di(p-tolyl) formamidinate, and L = pdz (pyridazine; 2), cinn (cinnoline; 3), and bncn (benzo[c]cinnoline; 4), were synthesized from the precursor cis-[Rh2(DTolF)2(bpnp)(CH3CN)2]2+ (1). The first reduction couple in 2-4 is localized on the bpnp ligand at approximately -0.52 V vs Ag/AgCl in CH3CN (0.1 M TBAPF6), followed by reduction of the corresponding diazine ligand. Complex 1 exhibits a Rh2(δ*)/DTolF → bpnp(π*) metal/ligand-to-ligand charge-transfer (1ML-LCT) absorption with a maximum at 767 nm (ε = 1800 M-1 cm-1). This transition is also present in the spectra of 2-4, overlaid with the Rh2(δ*)/DTolF → L(π*) 1ML-LCT bands at 516 nm in 2 (L = pdz), 640 nm in 3 (L = cinn), and 721 nm in 4 (L = bncn). Complexes 2 and 3 exhibit Rh2(δ*)/DTolF → bpnp 3ML-LCT excited states with lifetimes, τ, of 3 and 5 ns, respectively, in CH3CN, whereas the lowest energy 3ML-LCT state in 4 is Rh2(δ*)/DTolF → bncn in nature with τ = 1 ns. Irradiation of 4 with 670 nm light in DMF in the presence of 0.1 M TsOH (p-toluene sulfonic acid) and 30 mM BNAH (1-benzyl-1,4-dihydronicotinamide) results in the production of H2 with a turnover number (TON) of 16 over 24 h. The axial capping of the Rh2(II,II) bimetallic core with the bpnp ligand prevents the formation of an Rh-H hydride intermediate. These results show that the observed photocatalytic reactivity is localized on the bncn ligand, representing the first example of ligand-centered H2 production.

Exploring the Multifarious Role of the Ligand in Electrocatalytic Hydrogen Evolution Reaction Pathways

In recent years, researchers have shifted their focus towards investigating the redox properties of ancillary ligand backbones for small-molecule activation. Several metal complexes have been reported for the electrocatalytic H2 evolution reaction (HER), providing valuable mechanistic insights. This process involves efficient coupling of electrons and protons. Redox-active ligands stipulate internal electron transfer and promote effective orbital overlap between metal and ligand, thereby, enabling efficient proton-coupled electron transfer reactions. Understanding such catalytic mechanisms requires thorough spectroscopic and computational analyses. Herein, we summarize recent examples of molecular electrocatalysts based on 3d transition metals that have significantly influenced mechanistic pathways, thus, emphasizing the multifaceted role of metal-ligand cooperativity.

Catalyst Engineering for the Selective Reduction of CO2 to CH4 : A First-Principles Study on X-MOF-74 (X=Mg, Mn, Fe, Co, Ni, Cu, Zn)

The conversion of carbon dioxide (CO2 ) into more valuable chemical compounds represents a critical objective for addressing environmental challenges and advancing sustainable energy sources. The CO2 reduction reaction (CO2 RR) holds promise for transforming CO2 into versatile feedstock materials and fuels. Leveraging first-principles methodologies provides a robust approach to evaluate catalysts and steer experimental efforts. In this study, we examine the CO2 RR process using a diverse array of representative cluster models derived from X-MOF-74 (where X encompasses Mg, Mn, Fe, Co, Ni, Cu, or Zn) through first-principles methods. Notably, our investigation highlights the Fe-MOF-74 cluster's unique attributes, including favorable CO2 binding and the lowest limiting potential of the studied clusters for converting CO2 to methane (CH4 ) at 0.32 eV. Our analysis identified critical factors driving the selective CO2 RR pathway, enabling the formation CH4 on the Fe-MOF-74 cluster. These factors involve less favorable reduction of hydrogen to H2 and strong binding affinities between the Fe open-metal site and reduction intermediates, effectively curtailing desorption processes of closed-shell intermediates such as formic acid (HCOOH), formaldehyde (CH2 O), and methanol (CH3 OH), to lead to selective CH4 formation.

Toward Benchmark-Quality Ab Initio Predictions for 3d Transition Metal Electrocatalysts: A Comparison of CCSD(T) and ph-AFQMC

Generating accurate ab initio ionization energies for transition metal complexes is an important step toward the accurate computational description of their electrocatalytic reactions. Benchmark-quality data is required for testing existing theoretical methods and developing new ones but is complicated to obtain for many transition metal compounds due to the potential presence of both strong dynamical and static electron correlation. In this regime, it is questionable whether the so-called gold standard, coupled cluster with singles, doubles, and perturbative triples (CCSD(T)), provides the desired level of accuracy─roughly 1-3 kcal/mol. In this work, we compiled a test set of 28 3d metal-containing molecules relevant to homogeneous electrocatalysis (termed 3dTMV) and computed their vertical ionization energies (ionization potentials) with CCSD(T) and phaseless auxiliary-field quantum Monte Carlo (ph-AFQMC) in the def2-SVP basis set. A substantial effort has been made to converge away the phaseless bias in the ph-AFQMC reference values. We assess a wide variety of multireference diagnostics and find that spin-symmetry breaking of the CCSD wave function and the PBE0 density functional correlate well with our analysis of multiconfigurational wave functions. We propose quantitative criteria based on symmetry breaking to delineate correlation regimes inside of which appropriately performed CCSD(T) can produce mean absolute deviations from the ph-AFQMC reference values of roughly 2 kcal/mol or less and outside of which CCSD(T) is expected to fail. We also present a preliminary assessment of density functional theory (DFT) functionals on the 3dTMV set.

Ni3S2/Co9S8 embedded poor crystallinity NiCo layered double hydroxides hierarchical nanostructures for efficient overall water splitting

Nickel-cobalt bimetallic layered double hydroxides (NiCo LDHs) are potential electrocatalysts with high performance and stability for overall water-splitting. However, its weak conductivity limits its practical applications. Herein, a simple hydrothermal in-situ conversion strategy is employed for constructing the novel heterogeneous electrocatalyst of Ni₃S₂/Co₉S₈ embedded poor crystallinity (Pc) NiCo LDH nanosheet arrays grown on the Ni foam (Pc-NiCo LDH/ Ni₃S₂/Co₉S₈), which can improve the conductivity via regulating the crystallinity. The crystallinity of NiCo LDH is well regulated by adjusting the amount of sulfur source, and the construction of Ni₃S₂/Co₉S₈ heterostructure exposes more active sites, improves the electrical conductivity, enhances the electronic interaction between NiCo LDH and Ni₃S₂/Co₉S₈, and significantly promotes the kinetics of water splitting. The optimized Pc-NiCo LDH/Ni₃S₂/Co₉S₈ hierarchical structure as both the anode and cathode exhibit the overall water splitting performance with the cell voltage of only 1.744 V to achieve the current density of 50 mA cm^-2 in the alkaline media and shows the competitive H₂ and O₂ production rate of 6.4 and 3.1 μL s^-1, respectively, suggesting its potential practical applications. This work provides a novel idea for the design of multiphase composite electrocatalysts applied in water splitting.

Metal-Ligand Role Reversal: Hydride-Transfer Catalysis by a Functional Phosphorus Ligand with a Spectator Metal

Hydride transfer catalysis is shown to be enabled by the nonspectator reactivity of a transition metal-bound low-symmetry tricoordinate phosphorus ligand. Complex 1·[Ru]+, comprising a nontrigonal phosphorus chelate (1, P(N(o-N(2-pyridyl)C6H4)2) and an inert metal fragment ([Ru] = (Me5C5)Ru), reacts with NaBH4 to give a metallohydridophosphorane (1H·[Ru]) by P-H bond formation. Complex 1H·[Ru] is revealed to be a potent hydride donor (ΔG°H-,exp < 41 kcal/mol, ΔG°H-,calc = 38 ± 2 kcal/mol in MeCN). Taken together, the reactivity of the 1·[Ru]+/1H·[Ru] pair comprises a catalytic couple, enabling catalytic hydrodechlorination in which phosphorus is the sole reactive site of hydride transfer.

Non-Metallic Phosphorus Corrole as Efficient Electrocatalyst in Hydrogen Evolution Reaction

The economical consideration of using an electrocatalyst in energy-related field, composed of non-precious/sustainable elements is quite noteworthy. In this work, the phosphorus(V) complex of tris-(pentafluorophenyl)corrole [(TPFC)P^V (OH)₂ ] was reported as electrocatalyst for the hydrogen evolution reaction (HER). The electrochemical studies revealed that the HER experienced a ECEC pathway (E: electron transfer step, C: chemical step), and the possible intermediate [P^V ]-H species was suggested. (TPFC)P^V (OH)₂ displayed excellent HER activity in dimethylformamide (DMF) with trifluoroacetic acid (TFA) as the proton source, and the turnover frequency (TOF) reached 31.75 s^-1 at an overpotential of 900 mV. Interestingly, the HER electrocatalytic performance remained extraordinary even applying water as a proton source in acetonitrile/water (v/v=2 : 3), with a TOF of 18.40 mol H 2 ${{_{{\rm H}{_{2}}}}}$  mol_cat ^-1  h^-1 at an overpotential of 900 mV.

Leveraging Metal and Ligand Reactive Sites for One Pot Reactions: Ligand-Centered Borenium Ions for Tandem Catalysis with Palladium

Tandem catalysts that perform two different organic transformations in a single pot are highly desirable because they enable rapid and efficient assembly of simple organic building blocks into more complex molecules. Many examples of tandem catalysis rely on metal-catalyzed reactions involving one or more metal complexes. Remarkably, despite surging interest in the development of chemically reactive (i. e., non-innocent) ligands, there are few examples of metal complexes that leverage ligand-centered reactivity to perform catalytic reactions in tandem with separate catalytic reactions at the metal. Here we report how multifunctional Pd complexes with triaminoborane-derived diphosphorus ligands, called TBDPhos, appear to facilitate borenium-catalyzed cycloaddition reactions at the ligand, and Pd-catalyzed Stille and Suzuki cross-coupling reactions at the metal. Both transformations can be accessed in one pot to afford rare examples of tandem catalysis using separate metal and ligand catalysis sites in a single complex.

Electrocatalytic H2 evolution using binuclear cobalt complexes as catalysts

We report herein on the use of two binuclear cobalt complexes with the N,N'-bis(salicylidene)-phenylmethanediamine ligand as catalysts for the H2 evolution in DMF solution with acetic acid as proton source. Both experimental analyses (electrochemical analysis, spectroscopy analysis) and theoretical analysis (foot-of-the wave analysis) were employed. These catalysts required an overpotential of ca. 470 mV to catalyze the H2 evolution and generated H2 gas with a faradaic efficiency of 85-95% as calculated on the basis of after 5 hour bulk electrolysis. The kinetic investigation showed the maximal TOF value of 50 s-1 on the basis of an ECEC mechanism. Two cobalt centers, standing at a long distance of 4.175 Å, operated independently during catalysis without a synergetic effect or cooperation capability.

Cobalt-electrocatalytic HAT for functionalization of unsaturated C-C bonds

The study and application of transition metal hydrides (TMHs) has been an active area of chemical research since the early 1960s1, for energy storage, through the reduction of protons to generate hydrogen2,3, and for organic synthesis, for the functionalization of unsaturated C-C, C-O and C-N bonds4,5. In the former instance, electrochemical means for driving such reactivity has been common place since the 1950s6 but the use of stoichiometric exogenous organic- and metal-based reductants to harness the power of TMHs in synthetic chemistry remains the norm. In particular, cobalt-based TMHs have found widespread use for the derivatization of olefins and alkynes in complex molecule construction, often by a net hydrogen atom transfer (HAT)7. Here we show how an electrocatalytic approach inspired by decades of energy storage research can be made use of in the context of modern organic synthesis. This strategy not only offers benefits in terms of sustainability and efficiency but also enables enhanced chemoselectivity and distinct, tunable reactivity. Ten different reaction manifolds across dozens of substrates are exemplified, along with detailed mechanistic insights into this scalable electrochemical entry into Co-H generation that takes place through a low-valent intermediate.

Catalytic Mechanism of Competing Proton Transfer Events from Water and Acetic Acid by [CoII(bpbH2)Cl2] for Water Splitting Processes

We performed first principles simulations to explore the water reduction process of the cobalt complex [Co^II(bpbH₂)Cl₂], where bpbH₂ = N,N'-bis(2'-pyridine carboxamide)-1,2-benzene. We considered the sequence steps of electron reduction followed by the proton addition process to observe the hydrogen evolution process. An experimental study of the catalyst showed that the increase in the acetic acid concentration triggers catalytic current and reduction of Co(II) to Co(I), and protonation occurred, yielding a Co(III)-H intermediate. Therefore, we used water and acetic acid as the proton sources. We compare the proton transfer kinetics from both the water and acetic acid. The reduction potentials and proton transfer kinetics from water or acetic acid to the reaction center were studied in a DMF solvent through the implicit solvent model. The first proton transfer from the acetic acid is more favorable, forming a Co^III-H complex and further reducing to Co^II-H. The second proton transfer from water to the Co^II-H moiety requires less free energy than acetic acid and is the rate-limiting step. The nature of the reduction process is also examined through the charge analysis, which reveals that the ligand becomes softer due to the C═O groups.

From Ligand- to Metal-centered Reactivity: Metal Substitution Effect in Thiosemicarbazone-based Complexes for H2 Production

The quest to develop and optimize catalysts for H 2 production requires a thorough understanding in the possible catalytic mechanisms involved. Transition metals are very often the centers of reactivity in the catalysis, although this can change in the presence of a redox-active ligand. Investigating the differences in catalysis when considering ligand- and metal-centered reactivity is important to find the most optimal mechanisms for hydrogen evolution reaction. Here, we investigated this change of reactivity in two versions of a thiosemicarbazone-based complex, using Co and Ni metal centers. While the Ni version has a ligand-centered reactivity, Co switches it toward a metal-centered one. Comparison between the mechanisms show differences in rate-limiting steps, and shows the importance of identifying those steps in order to optimize the system for hydrogen production.

A bio-inspired heterodinuclear hydrogenase CoFe complex

Herein, a new heterobimetallic CoFe complex is reported with the aim of comparing its performance in terms of H₂ production within a series of related MFe complexes (M = Ni, Fe). The fully oxidized [(L^N2S2)Co^II(CO)Fe^IICp]⁺ complex (CoIIFeII, L^{N2S2 2-} = 2,2'-(2,2'-bipyridine-6,6'-diyl)bis(1,1'-diphenylethanethiolate), Cp^- = cyclopentadienyl anion) can be (electro)chemically reduced to its CoIFeII form, and both complexes have been isolated and fully characterized by means of classic spectroscopic techniques and theoretical calculations. The redox properties of CoIIFeII have been investigated in DMF, revealing that this complex is the easiest to reduce by one-electron among the analogous MFe complexes (M = Ni, Fe, Co). Nevertheless, it displays no electrocatalytic activity for H₂ production, contrary to the FeFe and NiFe analogs, which have proven remarkable performance.

Proton reduction by a bimetallic zinc selenolate electrocatalyst

The development of alternative energy sources is the utmost priority of developing society. Unlike many prior homogeneous electrocatalysts that rely on a change in the oxidation state of the metal center and/or electrochemically active ligand, here we report the synthesis and structural characterization of a bimetallic zinc selenolate complex consisting of a redox silent zinc metal ion and a tridentate ligand that catalyzes the reduction of protons into hydrogen gas electrochemically and displays one of the highest reported TOF for a homogeneous TM-metal free ligand centered HER catalyst, 509 s-1. The current-voltage analysis confirms the onset overpotential of 0.86 V vs. Ag/AgCl for the HER process. Constant potential electrolysis (CPE) has been carried out to study the bulk electrolysis of our developed protocol, which reveals that the bimetallic zinc selenolate catalyst is stable under cathodic as well as anodic potentials and generates hydrogen gas with a faradaic efficiency of 75%. Preliminary studies on the heterogeneous catalyst were conducted by depositing the bimetallic zinc selenolate catalyst on the electrode surface.

Electrocatalytic proton reduction by dinuclear cobalt complexes in a nonaqueous electrolyte

Two dinuclear CoII complexes 1 and 2 have been synthesized and characterized using various spectroscopic methods. Both the complexes were employed for H+ reduction in organic media. Faradaic efficiency of 82–90% was obtained for the H2 evolution.

Electrocatalytic H2 Generation from Water Relying on Cooperative Ligand Electron Transfer in "PN3 P" Pincer-Supported NiII Complexes

Water is the most sustainable source for H₂ production, and the efficient electrocatalytic production of H₂ from mixed water/acetonitrile solutions by using two new air-stable nickel(II) pincer complexes, [Ni(κ³ -2,6-{Ph₂ PNR}₂ (NC₅ H₃ )Br₂ ] (R=H I, Me II) is reported. Hydrogen generation from H₂ O/CH₃ CN solutions is initiated at -2 V against Fc^+/0 , and bulk electrocatalysis studies showed that the catalyst functions with an excellent Faradaic efficiency and a turnover frequency of 160 s^-1 . A DFT computational investigation of the reduction behavior of I and II revealed a correlation of H₂ formation with charge donation from electrons originating in a reduced ligand-localized orbital. As a result, these catalysts are proposed to proceed by a novel mechanism involving electron/proton transfer between a Ni^0I species bonded to an anionic PN³ P ligand ("L^- /Ni^0I ") and a Ni^I -hydride ("Ni-H"). Furthermore, these catalysts are able to reduce phenol and acetic acid, more active proton sources, at lower potentials that correlate with the substrate pK_a .

H2 Evolution from Electrocatalysts with Redox-Active Ligands: Mechanistic Insights from Theory and Experiment vis-à-vis Co-Mabiq

Electrocatalytic hydrogen production via transition metal complexes offers a promising approach for chemical energy storage. Optimal platforms to effectively control the proton and electron transfer steps en route to H₂ evolution still need to be established, and redox-active ligands could play an important role in this context. In this study, we explore the role of the redox-active Mabiq (Mabiq = 2-4:6-8-bis(3,3,4,4-tetramethlyldihydropyrrolo)-10-15-(2,2-biquinazolino)-[15]-1,3,5,8,10,14-hexaene1,3,7,9,11,14-N₆) ligand in the hydrogen evolution reaction (HER). Using spectro-electrochemical studies in conjunction with quantum chemical calculations, we identified two precatalytic intermediates formed upon the addition of two electrons and one proton to [Co^II(Mabiq)(THF)](PF₆) (Co_Mbq). We further examined the acid strength effect on the generation of the intermediates. The generation of the first intermediate, Co_Mbq-H¹, involves proton addition to the bridging imine-nitrogen atom of the ligand and requires strong proton activity. The second intermediate, Co_Mbq-H², acquires a proton at the diketiminate carbon for which a weaker proton activity is sufficient. We propose two decoupled H₂ evolution pathways based on these two intermediates, which operate at different overpotentials. Our results show how the various protonation sites of the redox-active Mabiq ligand affect the energies and activities of HER intermediates.

Devising a Polyoxometalate-Based Functional Material as an Efficient Electrocatalyst for the Hydrogen Evolution Reaction

Hydrogen is the solution to all the problems associated with the energy crisis. Generating hydrogen from water splitting is one of the greener approaches, but it requires an efficient catalyst that is economical for the bulk production of hydrogen. The transition metal-aqua coordination complexes, which are otherwise inactive/unstable for electrochemical hydrogen evolution reaction (HER) activity, can efficiently be utilized for the same by attaching these metal-aqua species on a stable support. With a similar approach, we have synthesized and structurally characterized a two-dimensional polyoxometalate (POM)-copper complex hybrid that supports a copper(II)-aqua-bypyridine complex with a molecular formula of the overall system, [{Cu^II(2,2'-bpy)(H₂O)₂}][{Co^IIW^VI₁₂O₄₀}{Cu^II(2,2'-bpy)(H₂O)}{Cu^II(2,2'-bpy)}]·2H₂O (1). The bis(aqua)-mono(bipyridine) Cu(II)-complex fragment {Cu^II(2,2'-bpy)(H₂O)₂}²⁺, attached to the two-dimensional POM-Cu-complex support, acts as an active catalytic center that catalyzes the electrochemical HER. The electrochemical studies done for this work enabled us to understand the role of compound 1 as an electrocatalyst for the HER in near-neutral medium (pH 4.8), under buffered conditions (acetate buffer). Through detailed electrochemical experiments including controlled ones, we understand that compound 1 follows a proton-coupled electron transfer (PCET) pathway with one proton and one electron involvement in the HER. The overpotential required to achieve a current density of 1 mA/cm² is found to be 520 mV with a Faradaic efficiency of 81%.

Graphene-supported single-atom catalysts and applications in electrocatalysis

Supported metal nanostructures are the most extensively studied heterogeneous catalysts, benefiting from easy separation, regeneration and affordable cost. The size of the supported metal species is one of the decisive factors in determining the activity of heterogeneous catalysts. Particularly, the unsaturated coordination environment of metal atoms preferably act as the active centers, minimizing these metal species can significantly boost the specific activity of every single metal atom. Single-atom catalysts/catalysis (SACs), containing isolated metals atomically dispersed on or coordinated with the surface of a support material, represent the ultimate utilization of supported metals and maximize metal usage efficiency. Graphene, a two-dimensional star material, exhibiting extraordinary physical and chemical properties, has been approved as an excellent platform for constructing SACs. When atomically dispersed metal atoms are strongly anchored on the graphene surface, featuring ultra-high surface area and excellent electronic properties, SACs offer a great potential to significantly innovate the conventional heterogeneous catalysis, especially in the field of electrocatalysis. In this review, a detailed discussion of graphene-supported SACs, including preparation approaches, characterization techniques and applications on typical electrocatalytic reactions is provided. The advantages and unique features of graphene-supported SACs as efficient electrocatalysts and the upcoming challenges for improving their performance and further practical applications are also highlighted.

Biological concepts for catalysis and reactivity: empowering bioinspiration

Biological systems provide attractive reactivity blueprints for the design of challenging chemical transformations. Emulating the operating mode of natural systems may however not be so easy and direct translation of structural observations does not always afford the anticipated efficiency. Metalloenzymes rely on earth-abundant metals to perform an incredibly wide range of chemical transformations. To do so, enzymes in general have evolved tools and tricks to enable control of such reactivity. The underlying concepts related to these tools are usually well-known to enzymologists and bio(inorganic) chemists but may be a little less familiar to organometallic chemists. So far, the field of bioinspired catalysis has greatly focused on the coordination sphere and electronic effects for the design of functional enzyme models but might benefit from a paradigm shift related to recent findings in biological systems. The goal of this review is to bring these fields closer together as this could likely result in the development of a new generation of highly efficient bioinspired systems. This contribution covers the fields of redox-active ligands, entatic state reactivity, energy conservation through electron bifurcation, and quantum tunneling for C-H activation.

Oxygen Reduction Assisted by the Concert of Redox Activity and Proton Relay in a Cu(II) Complex

A copper complex, [Cu(dpaq)](ClO₄) (1), of a monoanionic pentadentate amidate ligand (dpaq) has been isolated and characterized to study its efficacy toward electrocatalytic reduction of oxygen in neutral aqueous medium. The Cu(II) mononuclear complex, poised in a distorted trigonal bipyramidal structure, reduces oxygen at an onset potential of 0.50 V vs RHE. Kinetics study by hydrodynamic voltammetry and chronoamperometry suggests a stepwise mechanism for sequential reduction of O₂ to H₂O₂ to H₂O at a single-site Cu-catalyst. The foot-of-the-wave analysis records a turnover frequency of 5.65 × 10² s^-1. At pH 7.0, complex 1 undergoes a quasi-reversible mixed metal-ligand-based reduction and triggers the reduction of dioxygen to water. Electrochemical studies in tandem with quantum chemical investigation, conducted at different redox states, portray the active participation of ligand in completing the process of proton-coupled electron transfer internally. The protonated carboxamido moiety acts as a proton relay, while the quinoline-based orbital supplies the necessary redox equivalent for the conversion of complex 1 to Cu(II)-hydroperoxo species. Thus, a suitable combination of redox non-innocence and proton shuttling functionality in the ligand makes it an effective electron-proton-transfer mediator and subsequently assists the process of oxygen reduction.

Influence of Multisite Metal-Ligand Cooperativity on the Redox Activity of Noninnocent N2S2 Ligands

Metal-ligand cooperativity (MLC) relies on chemically reactive ligands to assist metals with small-molecule binding and activation, and it has facilitated unprecedented examples of catalysis with metal complexes. Despite growing interest in combining ligand-centered chemical and redox reactions for chemical transformations, there are few studies demonstrating how chemically engaging redox active ligands in MLC affects their electrochemical properties when bound to metals. Here we report stepwise changes in the redox activity of model Ru complexes as zero, one, and two BH₃ molecules undergo MLC binding with a triaryl noninnocent N₂S₂ ligand derived from o-phenylenediamine (L1). A similar series of Ru complexes with a diaryl N₂S₂ ligand with ethylene substituted in place of phenylene (L2) is also described to evaluate the influence of the o-phenylenediamine subunit on redox activity and MLC. Cyclic voltammetry (CV) studies and density functional theory (DFT) calculations show that MLC attenuates ligand-centered redox activity in both series of complexes, but electron transfer is still achieved when only one of the two redox-active sites on the ligands is chemically engaged. The results demonstrate how incorporating more than one multifunctional reactive site could be an effective strategy for maintaining redox noninnocence in ligands that are also chemically reactive and competent for MLC.

Electrocatalytic hydrogen production by dinuclear cobalt(ii) compounds containing redox-active diamidate ligands: a combined experimental and theoretical study

The chiral dicobalt(ii) complex [Co^II₂(μ₂-L)₂] (1) (H₂L = N²,N⁶-di(quinolin-8-yl)pyridine-2,6-dicarboxamide) and its tert-butyl analogue [Co^II₂(μ₂-LBu)₂] (2) were structurally characterized and their catalytic evolution of H₂ was investigated.

Recent advances in the mechanisms of the hydrogen evolution reaction by non-innocent sulfur-coordinating metal complexes

This review comments on the homogeneous HER mechanisms for catalysts carrying S-non-innocent ligands in the light of experimental and computational data.

New cobalt(ii) coordination designs and the influence of varying chelate characters, ligand charges and incorporated group I metal ions on enzyme-like oxidative coupling activity

In transition-metal-mediated catalysis, design of new, well defined coordination architectures and subjecting them to catalysis testing under the same reaction conditions is a necessity tool for improved understanding of desirable active site geometries and characteristics.

Molecular Electrocatalysts for the Hydrogen Evolution Reaction: Input from Quantum Chemistry

In the pursuit of carbon-free fuels, hydrogen can be considered as an apt energy carrier. The design of molecular electrocatalysts for hydrogen production is important for the development of renewable energy sources that are abundant, inexpensive, and environmentally benign. Over the last 20 years, a large number of electrocatalysts have been developed, and considerable efforts have been directed toward the design of earth-abundant, first-row transition-metal complexes capable of promoting electrocatalytic hydrogen evolution reaction (HER). In this context, numerical approaches have emerged as powerful tools to study the catalytic performances of these complexes. This review covers some of the most significant theoretical mechanistic studies of biomimetic and bioinspired homogeneous HER catalysts. The approaches employed to study the free energy landscapes are discussed and methods used to obtain accurate estimates of relevant observables required to study the HER are presented. Furthermore, the structural and electronic parameters that govern the reactivity, and are necessary to achieve efficient hydrogen production, are discussed in view of future research directions.

Self-Assembled Monolayers of Molybdenum Sulfide Clusters on Au Electrode as Hydrogen Evolution Catalyst for Solar Water Splitting

Hydrogen evolution reaction (HER) activities of self-assembled monolayers (SAMs) of [Mo3S7(S2CNMe2)3] and several other MoSx molecular clusters are presented on planer Au electrode. Our study suggests that such Mo-S clusters are unstable under HER reaction conditions of a strongly acidic electrolyte. The [Mo3S7(S2CNEt2)3]I monolayer prepared from DMF showed greater stability among all the studied precursors. The X-ray photoelectron spectroscopy (XPS) analysis on a monolayer of [Mo3S7(S2CNMe2)3]I in THF assembled on Au/ITO suggested sulfur-rich composition with S:Mo ratio of 2.278. The Mo-S monolayer clusters resulting from [Mo3S7(S2CNMe2)3]I in THF showed a Tafel slope of 75.74 mV dec−1 and required a lower overpotential of 410 mV to reach a high HER catalytic current density of 100 mA cm−2 compared to the other studied precursors. Surface coverage of the Mo-S clusters on the Au surface was confirmed by cyclic voltammetry (CV) curves from K3Fe(CN)6 and anodization of Au surface. Further, the rotating ring-disk electrode (RRDE) measurements were performed for the monolayer of [Mo3S7(S2CNMe2)3]I prepared in THF to study its reaction kinetics. The HER catalytic activity of such monolayer Mo-S clusters can further be improved by controlling the sulfur vacancy.