Robust and highly emissive copper(I) halide 1D-coordination polymers with triphenylarsine and a series of bridging N-heteroaromatic co-ligands

Various 1D-coordination polymers with dinuclear rhombic {Cu2X2} cores (X = Br, I) were synthesized using a spontaneous evaporation method employing triphenylarsine (AsPh3) and six types of bidentate N-heteroaromatic co-ligands. The coordination polymers exhibited intense emission even at 298 K (quantum yield: up to 0.60), and their emission color was dependent on the N-heteroaromatic co-ligand. The emission efficiencies of these coordination polymers were higher than those of the discrete complexes with AsPh3 and monodentate N-heteroaromatic co-ligands reported in our previous work. In addition, the luminescence of these coordination polymers was more resistant to mechanical stimuli than that of the discrete ones.

A family of CuI-based 1D polymers showing colorful short-lived TADF and phosphorescence induced by photo- and X-ray irradiation

Exploiting 2-(alkylsulfonyl)pyridines as 1,3-N,S-ligands, herein we have constructed 1D CuI-based coordination polymers (CPs) bearing unprecedented (CuI)_n chains and possessing remarkable photophysical properties. At room temperature, these CPs show efficient TADF, phosphorescence or dual emission in the deep-blue to red range with outstandingly short decay times of 0.4-2.0 μs and good quantum performance. Owing to great structural diversity, the CPs demonstrate a variety of emissive mechanisms, spanning from TADF of ¹(M + X)LCT type to ³CC and ³(M + X)LCT phosphorescence. Moreover, the designed compounds emit strong X-ray radioluminescence with the quantum efficiency of up to an impressive 55% relative to all-inorganic BGO scintillators. The presented findings push the boundaries in designing TADF and triplet emitters with very short decay times.

Tetranuclear Copper(I) and Silver(I) Pyrazolate Adducts with 1,1'-Dimethyl-2,2'-bibenzimidazole: Influence of Structure on Photophysics

A reaction of a cyclic trinuclear copper(I) or silver(I) pyrazolate complex ([MPz]₃, M = Cu, Ag) with 1,1'-dimethyl-2,2'-bibenzimidazole (L) leads to the formation of tetranuclear adducts decorated by one or two molecules of a diimine ligand, depending on the amount of the ligand added (0.75 or 1.5 equivalents). The coordination of two L molecules stabilizes the formation of a practically idealized tetrahedral four-metal core in the case of a copper-containing complex and a distorted tetrahedron in the case of a Ag analog. In contrast, complexes containing one molecule of diimine possess two types of metals, two- and three-coordinated, forming the significantly distorted central M₄ cores. The diimine ligands are twisted in these complexes with dihedral angles of ca. 50-60°. A TD-DFT analysis demonstrated the preference of a triplet state for the twisted 1,1'-dimethyl-2,2'-bibenzimidazole and a singlet state for the planar geometry. All obtained complexes demonstrated, in a solution, the blue fluorescence of the ligand-centered (LC) nature typical for free diimine. In contrast, a temperature decrease to 77 K stabilized the structure close to that observed in the solid state and activated the triplet states, leading to green phosphorescence at ca. 500 nm. The silver-containing complex Ag₄Pz₄L exhibited dual emission from both the singlet and triplet states, even at room temperature.

Green Emissive Copper(I) Coordination Polymer Supported by the Diethylpyridylphosphine Ligand as a Luminescent Sensor for Overheating Processes

Tertiary diethylpyridylphosphine was synthesized by the reaction of pyridylphosphine with bromoethane in a suberbasic medium. The reaction of phosphine with the copper(I) iodide led to the formation of a copper(I) coordination polymer, which, according to the X-ray diffraction data, has an intermediate structure with a copper-halide core between the octahedral and stairstep geometries of the Cu₄I₄ clusters. The obtained coordination polymer exhibits a green emission in the solid state, which is caused by the ³(M+X)LCT transitions. The heating up of the copper(I) coordination polymer to 138.5 °C results in its monomerization and the formation of a new solid-state phase. The new phase exhibits a red emission, with the emission band maximum at 725 nm. According to the experimental data and quantum chemical computations, it was concluded that depolymerization probably leads to a complex that is formed with the octahedral structure of the copper-halide core. The resulting solid-state phase can be backward-converted to the polymer phase via recrystallization from the acetone or DMF. Therefore, the obtained coordination polymer can be considered a sensor or detector for the overheating of processes that should be maintained at temperatures below 138 °C (e.g., engines, boiling liquids, solar heat systems, etc.).

Red room temperature phosphorescence of lead halide based coordination polymer showing efficient angle-dependent polarized emission and photoelectric performance

The development of organic-inorganic hybrid materials with long-lived room temperature phosphorescence (RTP) has attracted tremendous attention owing to their promising applications in the optoelectronic and anti-counterfeiting fields. In this work, by the selection of lead halide and electron-poor heteroaromatic molecule 1,10-phenanthroline (phen), a coordination polymer [Pb(phen)Cl₂] has been synthesized under hydrothermal conditions. This complex shows an alternating arrangement of a long-range order of phen π-conjugated systems and lead halide inorganic chains as revealed by X-ray single-crystal structural analysis. This structural character and special chemical components endow this hybrid material with a rare example of red room temperature phosphorescence. Its electronic structure and electronic transition behavior were further examined by theoretical calculations. Meanwhile, the film of the complex features remarkable angle-dependent polarized emission and photoelectric performance.

Thermally activated delayed fluorescence in luminescent cationic copper(i) complexes

In this work, the photophysical characteristics of [Cu(N^N)₂]⁺ and [Cu(N^N)(P^P)]⁺ complexes were described. The concept of thermally activated delayed fluorescence (TADF) and its development throughout the years was also explained. The importance of ΔE_(S1–T1) and spin-orbital coupling (SOC) values on the TADF behavior of [Cu(N^N)₂]⁺ and [Cu(N^N)(P^P)]⁺ complexes is discussed. Examples of ΔE_(S1–T1) values reported in the literature were collected and some trends were proposed (e.g. the effect of the substituents at the 2,9 positions of the phenanthroline ligand). Besides, the techniques (or calculation methods) used for determining ΔE_(S1–T1) values were described. The effect of SOC in TADF was also discussed, and examples of the determination of SOC values by DFT and TD-DFT calculations are provided. The last chapter covers the applications of [Cu(N^N)₂]⁺ and [Cu(N^N)(P^P)]⁺ TADF complexes and the challenges that are still needed to be addressed to ensure the industrial applications of these compounds.

Bibliographic review of cationic Cu(i) complexes that undergo Thermally Activated Delayed Fluorescence (TADF). From the first findings found in the homoleptic and heteroleptic Cu(i)-TADF complexes to the use of this property in lighting devices.

A halogen bonding assembled hybrid copper halide framework as a promising hypotoxicity photodetector

The first halogen bonding assembled three-dimensional hybrid copper iodide was obtained by a facile and sustainable “All-in-One” synthesis strategy and shows great application potential as a hypotoxicity photodetector.

Multi-stimulus semiconductor Cu(i)–I-pyrimidine coordination polymer with thermo- and mechanochromic sensing

The 1D-[Cu(aClpym)I]n coordination polymer behaves as an intelligent material with response to different stimuli since its emission is altered with temperature and with varying modes of pressure, making it a potential multi-response material.

Coordination-induced emission enhancement in copper(I) iodide coordination polymers supported by 2-(alkylsulfanyl)pyrimidines

First examples of copper(i) complexes with 2-(alkylsulfanyl)pyrimidine ligands have been synthesized. Reactions of copper(i) iodide with 2-(methylsulfanyl)pyrimidine (L1) in various metal-to-ligand molar ratios in MeCN afford a ladder-type coordination polymer [Cu2L1I2]n with polymeric chains built from double-stranded (Cu2I2)n ribbons supported on both sides by μ2-N,S-L1 molecules. Although the second ligand, 2-(ethylsulfanyl)pyrimidine (L2), differs from L1 only by a methylene group, its reactions with copper(i) iodide in MeCN yield not only a congenerous coordination polymer, [Cu2L2I2]n, but also [CuL2I]n, in which a similar (Cu2I2)n ribbon is decorated by N-monodentate L2 molecules. Absorption spectra of all compounds represent an interplay of metal + iodine-to-ligand charge transfer (XMLCT) and ligand-centered (LC) and cluster-centered (CC) transitions, while the emission occurs from the excited states of XMLCT nature. The luminescence of [Cu2L1I2]n and [Cu2L2I2]n is blue-shifted and greatly enhanced in comparison with that of [CuL2I]n (quantum yields: 89% and 68% for [Cu2L1I2]n and [Cu2L2I2]nvs. 23% for [CuL2I]n at 77 K), which can be associated with a more rigid μ2-N,S coordination of 2-(alkylsulfanyl)pyrimidine ligands in [Cu2L1I2]n and [Cu2L2I2]n leading to a less distorted T1 state.

Copper(i)–iodide cluster structures as functional and processable platform materials

This review provides a complete overview of the progress towards implementation of CuI-nanoclusters in functional materials and devices.

Quantitative Thermal Synthesis of Cu(I) Coordination Polymers That Exhibit Thermally Activated Delayed Fluorescence

As a new environmentally friendly route for synthesizing thermally activated delayed-fluorescence (TADF) Cu(I) complexes, we successfully and quantitatively synthesized strongly emissive Cu(I) coordination polymers [Cu₂I₂(PR₃)₂(n,n'-bpy)]_∞ (CuIR-n, R = Ph, Tol; n = 3, 4; bpy = bipyridine) via the quick thermal reaction of three starting materials (CuI, PR₃, and bpy organic ligands) for 1 h in the absence of a solvent. Powder X-ray diffraction and thermogravimetric analyses revealed that melting of the organic ligands significantly promoted the coordination polymerization reaction, and the stoichiometry of three starting materials was crucial to quantitatively affording CuIR-n. Notably, the photophysical properties of CuIR-n obtained by the thermal reaction were almost the same (emission wavelength, quantum yield, and lifetime) as that obtained by generally used solution reactions, probably because CuIR-n was thermally stable enough to prevent the thermal damage and to improve the crystallinity in the heating process. The emission origin of CuIR-n was assignable to TADF at 298 K and phosphorescence at 77 K originating from the metal-to-ligand charge-transfer excited state effectively mixed with the halide-to-ligand charge transfer ((M+X)LCT) state. Thus, the thermal reaction in the melted ligand could be a promising environmentally friendly method for producing TADF Cu(I) luminophores.

Three Novel Zn-Based Coordination Polymers: Synthesis, Structure, and Effective Detection of Al3+ and S2- Ions

Three novel Zn-based coordination polymers (CPs), [Zn(MIPA)]_n (1), {[Zn(MIPA)(4,4′-bipy)_0.5(H₂O)]·1.5H₂O}_n (2), and {[Zn(MIPA)(bpe)]·H₂O}_n (3) (MIPA = 4-methoxyisophthalic acid, 4,4′-bipy = 4,4′-bipyridine, bpe = (E)-1,2-di(pyridine-4-yl)ethane), were constructed by ligand 4-methoxyisophthalic acid under solvothermal conditions. Compound 1 features a beaded 2D-layer architecture, while compound 2 presents a 2-fold interpenetrating structure with a uninodal three-connected hcb topology. Compound 3 has a 3-fold interpenetrated four-connected dmp topology. Photoluminescence investigations of compound 2 were explored in detail, by which ions were detected, and it was observed to have the highest quenching efficiency toward Al³⁺ and S²⁻ ions. The possible fluorescence quenching mechanisms of 2 toward Al³⁺ and S²⁻ ions were also explored. To the best of our knowledge, this is the first potential dual-responsive luminescent probe based on a Zn(II) coordination polymer for detecting Al³⁺ and S²⁻ ions via a luminescence quenching effect in ethanol.

Copper(i) halide polymers derived from tris[2-(pyridin-2-yl)ethyl]phosphine: halogen-tunable colorful luminescence spanning from deep blue to green

A series of isostructural 1D coordination polymers bearing stair-step [Cu₄X₄] modules is reported. At ambient temperature, they feature bright halogen-modulated colorful luminescence spanning from deep blue to green.