Synthesis and Characterisation of a Graphene Oxide-Gold Nanohybrid for Use as Test Material

This paper reports the synthesis and characterization of a graphene oxide-gold nanohybrid (GO-Au) and evaluates its suitability as a test material, e.g., in nano(eco)toxicological studies. In this study, we synthesised graphene oxide (GO) and used it as a substrate for the growth of nano-Au decorations, via the chemical reduction of gold (III) using sodium citrate. The GO-Au nanohybrid synthesis was successful, producing AuNPs (~17.09 ± 4.6 nm) that were homogenously distributed on the GO sheets. They exhibited reproducible characteristics when characterised using UV-Vis, TGA, TEM, FTIR, AFM, XPS and Raman spectroscopy. The nanohybrid also showed good stability in different environmental media and its physicochemical characteristics did not deteriorate over a period of months. The amount of Au in each of the GO-Au nanohybrid samples was highly comparable, suggesting a potential for use as chemical label. The outcome of this research represents a crucial step forward in the development of a standard protocol for the synthesis of GO-Au nanohybrids. It also paves the way towards a better understanding of the nanotoxicity of GO-Au nanohybrid in biological and environmental systems.

α-Hydroxy acids modified β-cyclodextrin capped iron nanocatalyst for rapid reduction of nitroaromatics: A sonochemical approach

This study reports a sonochemical approach for the synthesis and catalytic performance of zerovalent iron nanoparticles (nZVI) capped with two cyclodextrin (CD) crosslinked polymers derived from Lactic acid and Citric acid (CDLA and CDCA respectively). The polymers and the catalysts were characterized by NMR, FTIR, HRTEM, DLS, Zeta potential, FESEM, EDAX, VSM, XRD, XPS, TGA analysis. The catalysts proved to be sustainable and recyclable for rapid sonochemical reduction of nitroaromatics under ambient conditions. The isolated yield of the derivatives was found to be greater than 90%. The results suggest excellent dispersibility, stability, high iron content and smaller size of CDLA polymer capped nZVI compared to CDCA capped nZVI, leading to two-fold higher catalytic activity. The effect of various crucial catalysis parameters was investigated and optimized. The scope of the reaction was extended to other nitroaromatics under the optimized conditions. Being magnetically separable, the cost effective and non-toxic catalysts exhibited high recycling efficiency (~13 cycles), high turnover number (TON) and turnover frequency (TOF). The recyclable catalysts could be low-cost and sustainable options for organic transformation in water via sonochemical approach in aqueous medium.

The roles of metal species supported on Fe3O4 aerogel for photoassisted 4-nitrophenol reduction and benzoic acid oxidation

Metal-supported Fe₃O₄ aerogel is employed for photoassisted 4-NP reduction and benzoic acid oxidation.

Microstructural Development and Rheological Study of a Nanocomposite Gel Polymer Electrolyte Based on Functionalized Graphene for Dye-Sensitized Solar Cells

For a liquid electrolyte-based dye-sensitized solar cell (DSSC), long-term device instability is known to negatively affect the ionic conductivity and cell performance. These issues can be resolved by using the so called quasi-solid-state electrolytes. Despite the enhanced ionic conductivity of graphene nanoplatelets (GNPs), their inherent tendency toward aggregation has limited their application in quasi-solid-state electrolytes. In the present study, the GNPs were chemically modified by polyethylene glycol (PEG) through amidation reaction to obtain a dispersible nanostructure in a poly(vinylidene fluoride-co-hexafluoro propylene) copolymer and polyethylene oxide (PVDF–HFP/PEO) polymer-blended gel electrolyte. Maximum ionic conductivity (4.11 × 10⁻³ S cm⁻¹) was obtained with the optimal nanocomposite gel polymer electrolyte (GPE) containing 0.75 wt% functionalized graphene nanoplatelets (FGNPs), corresponding to a power conversion efficiency of 5.45%, which was 1.42% and 0.67% higher than those of the nanoparticle-free and optimized-GPE (containing 1 wt% GNP) DSSCs, respectively. Incorporating an optimum dosage of FGNP, a homogenous particle network was fabricated that could effectively mobilize the redox-active species in the amorphous region of the matrix. Surface morphology assessments were further performed through scanning electron microscopy (SEM). The results of rheological measurements revealed the plasticizing effect of the ionic liquid (IL), offering a proper insight into the polymer–particle interactions within the polymeric nanocomposite. Based on differential scanning calorimetry (DSC) investigations, the decrease in the glass transition temperature (and the resultant increase in flexibility) highlighted the influence of IL and polymer–nanoparticle interactions. The obtained results shed light on the effectiveness of the FGNPs for the DSSCs.

Nanoengineering of Gold Nanoparticles: Green Synthesis, Characterization, and Applications

The fundamental aspects of the manufacturing of gold nanoparticles (AuNPs) are discussed in this review. In particular, attention is devoted to the development of a simple and versatile method for the preparation of these nanoparticles. Eco-friendly synthetic routes, such as wet chemistry and biosynthesis with the aid of polymers, are of particular interest. Polymers can act as reducing and/or capping agents, or as soft templates leading to hybrid nanomaterials. This methodology allows control of the synthesis and stability of nanomaterials with novel properties. Thus, this review focus on a fundamental study of AuNPs properties and different techniques to characterize them, e.g., Transmission Electron Microscopy (TEM), Atomic Force Microscopy (AFM), UV-Visible spectroscopy, Dynamic Light Scattering (DLS), X-Ray Diffraction (XRD), X-Ray Photoelectron Spectroscopy, Small-angle X-Ray Scattering (SAXS), and rheology. Recently, AuNPs obtained by “green” synthesis have been applied in catalysis, in medicine, and as antibacterials, sensors, among others.

Spontaneous Formation of Gold Nanoparticles on Graphene by Galvanic Reaction through Graphene

We demonstrate an effective and facile method for the deposition of gold nanoparticles (AuNPs) on graphene by using spontaneous galvanic reaction. Despite the interest and importance of the hybrid structure of noble metal-deposited graphene has been considerably increased for its fundamental knowledge in chemical and physical sciences and for its various applications, the progress of this subject is very slow mainly because of the lack of synthetic methods for such structures, especially that are not free from chemical contamination and usage of complex and expensive equipment. Therefore, we developed a new method allowing chemically pure AuNPs/graphene hybrid structures employing galvanic reaction. The spontaneous galvanic reaction was derived from reductant/graphene/oxidant sandwich structures, such as Au ions/graphene/Ge wafer and Au ions/graphene/copper foil, by placing Au ion solution droplets on graphene transferred on a germanium wafer or as made graphene on Cu foil, respectively. According to scanning electron microscopy and atomic force microscopy results, it was confirmed that AuNPs were successfully formed on the graphene surface. This result implies two important points. One is that the formation of pure AuNPs on graphene is possible without using other chemicals frequently required for conventional NP preparation. The other one is that it was experimentally demonstrated that there are electronic communications between the oxidant and reductant that are separated by graphene, through which electrons can pass freely.

Ethylene glycol-assisted fabrication and superb adsorption capacity of hierarchical porous flower-like magnesium oxide microspheres for phosphate

Hierarchical porous flower-like MgO microspheres were fabricated via an ethylene glycol-assisted route under mild conditions and exhibited an outstanding maximum adsorption capacity of 574.71 mg g⁻¹ for phosphate.