Surface modification effects on the tensile properties of functionalised graphene oxide epoxy films

Synergistic Effect between Modified Graphene Oxide and Ammonium Polyphosphate on Combustion Performance, Thermal Stability and Mechanical Properties of Polylactic Acid

To improve the thermal stability, ZF-GO (graphene oxide (GO) modified by zinc ferrite (ZF)) is prepared. In view of the anti-dripping function of ZF-GO and flame retardant effect of ammonium polyphosphate (APP), the influence of ZF-GO, APP, mixture of ZF-GO and APP on combustion performance, thermal stability and mechanical properties of polylactic acid (PLA) is investigated. Results show that the modification of GO by ZF significantly improves the residue of ZFGO by 34.7%. The char-forming capability and unique network structure of ZF-GO prevent the melt dripping of PLA. Although APP can increase the limiting oxygen index of PLA, there is still melt dripping. The combination of ZF-GO and APP improves the residual yield of 94PLA/3ZF-GO/3APP by 4.3 times relative to pure PLA, and the UL-94 level reaches V-0. The two additives show synergistic char-forming effect, and there is both physical carbonization and chemical carbonization. The incorporated fillers can decrease the total heat release (THR) of PLA composites. Specifically, the THR and peak value of heat release rate of 94PLA/3ZF-GO/3APP decrease by 21.2% and 53.9%, respectively. For the PLA/ZF-GO/APP system, plenty of residues and the anti-dripping network structure are key factors to get good flame retardancy. Addition of ZFGO and APP reduces the tensile strength, but the tensile elongation of the modified PLA composites is improved. 94PLA/ 3ZF-GO/3APP shows good integrated performance.

Photosensitive Composite Inks for Digital Light Processing Four-Dimensional Printing of Shape Memory Capture Devices

High-performance shape memory thermosetting polymers and their composites for four-dimensional (4D) printing are essential in practical applications. To date, most printable thermosets suffer from complicated processes, poor thermodynamic performances, and low printing speed. Here, photosensitive composite inks for fast photocuring printing are developed. The inks consist of epoxy acrylate (EPAc), polyethylene glycol dimethacrylate (PEGDMA), and carbon fillers, which form a firm network structure when exposed to UV light. EPAc is synthesized via addition esterification of epoxy resin and acrylic acid under mild conditions. It is worth noting that raw materials for the reaction are diverse, including not only various epoxy resins but also molecules with epoxy groups. The 4D printing speed of up to 180 mm/h is mainly attributed to the exothermic reaction initiated by free radicals, which accelerates the polymerization of EPAc and PEGDMA. Most importantly, by increasing the exposure time of each layer from 1 s to 3 s during the printing process, the epoxy composite-infilled carbon nanotubes and carbon fibers are printed to ensure the integrity of the microlayer structure. Furthermore, we design a claw-like catcher device based on the above printable composite inks to demonstrate its potential applications in aerospace, such as grasping end-of-service spacecraft or explosive debris. Undoubtedly, 4D printing technology opens up a new portal for the manufacturing of thermoset epoxy composites and complex structures, which make the shape memory thermosetting epoxy resins and their composites possess excellent properties and good engineering application prospects.

Development and Characterization of a Poly (Vinyl Alcohol)/Graphene Oxide Composite Hydrogel as An Artificial Cartilage Material

Poly (vinyl alcohol) hydrogel (PVA-H) is expected to be a suitable artificial articular cartilage material because of its high biocompatibility. However, it is difficult to affix to the surface of a living joint because it is bioinert and its mechanical strength needs to be improved. In this study, graphene oxide (GO) subjected to two oxidation rounds was used to form a nanocomposite material and the composite hydrogel PVA-GO-H was prepared by low-temperature crystallization. Scanning electron microscope (SEM) images showed that the addition of GO can increase roughness of the hydrogel surface. Contact angle measurements showed that the surface of PVA-GO-H exhibited hydrophobicity that increased with GO concentration and not with that of PVA-H, indicating that the hydrophilic parts of PVA and GO form hydrogen bonds and the hydrophobic part of GO was exposed on the surface. Tensile tests demonstrated that Young’s modulus was enhanced on the addition of GO. Osteoblast cells showed more affinity for PVA-GO-H than PVA-H, which much more cells adhere to than to PVA-GO-H after a certain period of culturing, suggesting GO can improve the cell attachment of PVA-H. Further studies on the influence of the oxidation time of GO are still required.