Disposable gold nanoparticle functionalized and bare screen-printed electrodes for potentiometric determination of trazodone hydrochloride in pure form and pharmaceutical preparations

From challenge to opportunity: Revolutionizing the monitoring of emerging contaminants in water with advanced sensors

Emerging contaminants in water represent long-term and unpredictable threats to both environmental and human health due to their persistence and bioaccumulation. Current research predominantly focuses on their removal rather than sustained monitoring. This review comprehensively investigates advanced sensor technologies for detecting these contaminants in water, critically evaluating biosensors, optical sensors, electrochemical sensors, and nanomaterial sensors. Elucidating the operational principles, performance metrics such as detection thresholds, and the pros and cons of their practical applications, the review addresses a significant research gap in environmental monitoring. Moreover, it enhances understanding of sensor effectiveness, which in turn guides researchers in selecting the right sensor types for various environmental scenarios. Furthermore, by emphasizing the integration of nanotechnology and the standardization of evaluation protocols, it promotes the development of robust, deployable sensing solutions. Ultimately, this leads to the proposal of a strategic framework aimed at significantly improving the detection capabilities of emerging contaminants and supporting the preservation of environmental health.

A screen printed methodology optimized by molecular dynamics simulation and Lean Six Sigma for the determination of xylometazoline in the presence of benzalkonium chloride in nasal drops

A new chemically disposable screen-printed modified electrode with yttrium doped manganese oxide (Mn2O3/Y2O3) nanocomposite at screen printed electrode was mainly constructed to quantify xylometazoline hydrochloride (XMZ). The crystallographic parameters were estimated from the XRD spectrum, suggesting that Mn₂O₃ of cubic phase with average grain size ∼ 77 nm. The SEM images revealed that Y³⁺ dopants had improved the surface topology. The findings indicate that morphological features play a vital role in improving the electronic properties of the fabricated electrode. Augmentation of Six Sigma (SS) with molecular dynamics simulation (MD) as a theoretical study was widely adopted to improve the current process as a quality management methodology by measuring the process capability to determine if the process meets the desired specification limits. Process capability is determined through measuring the variability in the process output and comparing these variations with the desired specifications. Also, it assures a robust method specification at a high level of targeted performance and statistical confidence. A greenness assessment procedure utilizing the eco-scale algorism was conducted to prove the greenness of the proposed methodology. Additionally, the proposed sensor presented a high sensitivity over the concentration range (1x10^-6-1x10^-2 mol L^-1) of a detection limit 3.93 × 10^-7 mol L^-1 with the Nernstian cationic slope of 58.18 ± 0.76 mV decade^-1 at 25 ± 1 °C.

Electropolymerized, Molecularly Imprinted Polymer on a Screen-Printed Electrode-A Simple, Fast, and Disposable Voltammetric Sensor for Trazodone

In recent years, analytical chemistry has been facing new challenges, particularly in developing low-cost, green, and easy-to-reproduce methods. In this work, a simple, reproducible, and low-cost electrochemical (voltammetric) molecularly imprinted polymer (MIP) sensor was designed specifically for the detection of trazodone (TZD). Trazodone (TZD) is an antidepressant drug consumed worldwide since the 1970s. By combining electropolymerization (surface imprinting) with screen-printed electrodes (SPCEs), the sensor is easy to prepare, is environmentally friendly (uses small amounts of reagents), and can be used for in situ analysis through integration with small, portable devices. The MIP was obtained using cyclic voltammetry (CV), using 4-aminobenzoic acid (4-ABA) as the functional monomer in the presence of TZF molecules in 0.1 M HCl. Non-imprinted control was also constructed in the absence of TZD. Both polymers were characterized using CV, and TZD detection was performed with DPV using the oxidation of TZD. The polymerization conditions were studied and optimized. Comparing the TZD signal for MIP/SPCE and NIP/SPCE, an imprinting factor of 71 was estimated, indicating successful imprinting of the TZD molecules within the polymeric matrix. The analytical response was linear in the range of 5-80 µM, and an LOD of 1.6 µM was estimated. Selectivity was evaluated by testing the sensor for molecules with a similar structure to TZD, and the ability of MIP/SPCE to selectively bind to TZD was proven. The sensor was applied to spiked tap water samples and human serum with good recoveries and allowed for a fast analysis (around 30 min).

Ultrasensitive early detection of insulin antibody employing novel electrochemical nano-biosensor based on controllable electro-fabrication process

An ultrasensitive novel electrochemical nano-biosensor for rapid detection of insulin antibodies against diabetes antigens was developed in this research. The presence of insulin antibodies has been demonstrated to be a strong predictor for the development of type 1 diabetes in individuals who do not have diabetes but are genetically predisposed. The proposed nano-biosensor fabrication process was based on the optimized sequential electropolymerization of polyaniline and electrodeposition of gold nanoparticles on the surface of the functionalized gold electrode. The morphological and chemical characterization of the modified electrode was studied by field emission scanning electron microscopy (FE-SEM), energy dispersive X-ray spectroscopy (EDX), atomic force microscopy (AFM), Fourier transform infrared spectroscopy (FTIR), and micro Raman spectroscopy. Moreover, the role of each component in the modification of the electrode was studied by electrochemical methods systematically. After immobilizing insulin antigen and blocking with bovine serum albumin, the nano-biosensor was used for determining different concentrations of insulin antibody under the optimal conditions. This nano-biosensor could respond to insulin antibody with a linear calibration range from 0.001 ng ml^-1 to 1000 ng ml^-1 with the detection limit of 0.017 pg ml^-1 and 0.034 pg ml^-1 and selectivity of 18.544 μA ng^-1 ml.cm^-2 and 31.808 μA ng^-1 ml.cm^-2 via differential pulse voltammetry and square wave voltammetry, respectively. This novel nano-biosensor exhibited a short response time, high sensitivity, and good reproducibility. It was successfully used in determining the insulin antibody in human samples with a standard error of less than 0.178. Therefore, the nano-biosensor has the potential for the application of early detection of type 1 diabetes. To our best knowledge, label-free electrochemical detection of insulin antibody based on immunosensor is developed for the first time.

Potentiometric Carbon Quantum Dots-Based Screen-Printed Arrays for Nano-Tracing Gemifloxacin as a Model Fluoroquinolone Implicated in Antimicrobial Resistance

Antimicrobial resistance (AMR) is a neglected issue that poses a serious global threat to public health, causing long-term negative consequences at both humanitarian and economic levels. Herein, we report an unprecedented economic fabrication method of seven potentiometric screen-printed sensors for the ultra-trace determination of gemifloxacin (GEMI) as a model of the fluoroquinolones antibiotics deeply involved in the growing AMR problem. Sensors were constructed by depositing homemade carbon ink on a recycled X-ray sheet, patterned using stencils printed with an office printer in simple, cost-effective steps requiring no sophisticated equipment. Four sensors were modified using carbon quantum dots (CQDs) synthesized from dextrose through a single-step method. Sensors exhibited a linear response in the concentration ranges 10−5–10−2 M (sensors 1, 3 and 4), 10−6–10−3 M (sensor 2) and 10−6–10−2 M (sensors 5, 6 and 7). LOD allowed tracing of the target drug at a nano-molar level down to 210 nM. GEMI was successfully determined in pharmaceutical formulations and different water samples without any pretreatment steps with satisfactory recovery (96.93–105.28% with SD values < 3). All sensors revealed a long lifetime of up to several months and are considered promising tools for monitoring water quality and efficiency of water treatment measures.

Fabrication of an (α-Mn2O3:Co)-decorated CNT highly sensitive screen printed electrode for the optimization and electrochemical determination of cyclobenzaprine hydrochloride using response surface methodology

A new chemically optimized screen-printed electrode modified with a cobalt-doped α-Mn2O3 nanostructure on carbon nanotube paste (α-Mn2O3:Co@CNTs) has been constructed for the recognition of cyclobenzaprine hydrochloride. The prepared paste is based on the incorporation of oxide ion conductors, such as the α-Mn2O3 nanostructure with cobalt and ion pairs (tetraphenyl borate coupled with the drug), as electroactive species in the screen-printed electrode to increase the sensor surface area and decrease electrical resistance. The central composite design is a useful methodology for the estimation and modeling of the exact optimum parameters specifically designed for this process. This is a good way to graphically clarify the relationship between various experimental variables and the slope response. The proposed sensor, α-Mn2O3:Co@CNTs, possesses very good sensitivity and the ability to recognize the drug over the concentration range of 1 × 10-6 to 1 × 10-2 mol L-1 at 25 ± °C with a detection limit of 2.84 × 10-7 mol L-1. It exhibits a reproducible potential and stable linear response for six months at a Nernstian slope of 58.96 ± 0.76 mV per decade. The proposed electrode approach has been successfully applied in the direct determination of the drug in its pure and dosage forms.

Screen-Printed Electrodes Modified with Metal Nanoparticles for Small Molecule Sensing

Recent progress in the field of electroanalysis with metal nanoparticle (NP)-based screen-printed electrodes (SPEs) is discussed, focusing on the methods employed to perform the electrode surface functionalization, and the final application achieved with different types of metallic NPs. The ink mixing approach, electrochemical deposition, and drop casting are the usual methodologies used for SPEs' modification purposes to obtain nanoparticulated sensing phases with suitable tailor-made functionalities. Among these, applications on inorganic and organic molecule sensing with several NPs of transition metals, bimetallic alloys, and metal oxides should be highlighted.