Development of a rapid and simple tetracycline detection system based on metal-enhanced fluorescence by europium-doped AgNP@SiO2 core-shell nanoparticles

Sensitive and selective detection of tetracycline using fluorescence-enhanced Eu(III)-functionalized silver nanoparticles with homocysteine

Utilizing metal luminescence enhancement to design fluorescent probes is a very sensible strategy. Herein, a fluorescent probe based on europium (III)-functionalized silver nanoparticles-conjugated homocysteine (AgNPs-Hcy-Eu3+) was proposed for the selective and sensitive detection of tetracycline (TC). In this probe, Eu(III) was employed as the detection signal unit for TC, while AgNPs-Hcy was used as the ligand of fluorescence enhancement. When TC exists, it can bind to Eu3+ immobilized in AgNPs-Hcy, leading to an enhanced fluorescence signal from Eu3+ through energy transfer. Under optimal conditions, the fluorescence intensity of AgNPs-Hcy-Eu3+ increased linearly with increasing TC concentration in the range of 0.1-30 μM (R2 = 0.9964). The fluorescent probe own fluorescence enhancement, paving the way for sensitive detection with a low detection limit of 0.083 μM. It also has good selectivity for common antibiotics and anions. This work can be applied to the determination of TC in tap water and milk with recoveries of 94-98.5%. We expect AgNPs-Hcy-Eu3+ to have potential applications in environmental testing and food safety.

Recent progress in lanthanide-based fluorescent nanomaterials for tetracycline detection and removal

Tetracycline (TC) has been widely used in clinical medicine and animal growth promotion due to its broad-spectrum antibacterial properties and affordable prices. Unfortunately, the high toxicity and difficult degradation rate of TC molecules make them easy to accumulate in the environment, which breaks the ecological balance and seriously threatens human health. Rapid and accurate detection of TC residue levels is important for ensuring water quality and food safety. Recently, fluorescence detection technology of TC residues has developed rapidly. Lanthanide nanomaterials, based on the high luminescence properties of lanthanide ions and the high matching with TC energy levels, are favored in the real-time trace detection of TC due to their advantages of high sensitivity, rapidity, and high selectivity. Therefore, they are considered potential substitutes for traditional detection methods. This review summarizes the synthesis strategy, TC response mechanism, removal mechanism, and applications in intelligent sensing. Finally, the development of lanthanide nanomaterials for TC fluorescence detection and removal is reasonably summarized and prospected. This review provides a reference for the establishment of a method for the accurate determination of TC content in complex food matrices.

Optical sensing of tetracycline concentration using a liquid crystal-based platform targeting the chelating properties of tetracycline

In this study, a liquid crystal (LC)-based assay for the real-time detection of tetracycline (Tc) was developed. The sensor was constructed by implementing an LC-based platform that utilized the chelating properties of Tc to target Tc metal ions. This design enabled Tc-dependent induction of changes in the optical image of the LC; these modifications could then be observed in real-time with the naked eye. The performance of the sensor in detecting Tc was investigated with various metal ions to identify the most effective metal ion for Tc detection. In addition, the selectivity of the sensor was evaluated using different antibiotics. A correlation between Tc concentration and the optical intensity of the LC optical images was established, which enabled the quantification of Tc concentrations. The proposed method can detect Tc concentrations with a detection limit as low as 2.67 pM. Tests were conducted on milk, honey, and serum samples, which demonstrated that the proposed assay is highly accurate and reliable. The high sensitivity and selectivity of the proposed method make it a promising tool for real-time Tc detection, with potential applications in fields ranging from biomedical research to agriculture.

Recent advances in luminescence and aptamer sensors based analytical determination, adsorptive removal, degradation of the tetracycline antibiotics, an overview and outlook

Tetracycline antibiotics (TCs), one of the important antibiotic groups, have been widely used in human and veterinary medicines. Their residues in foodstuff, soil and sewage have caused serious threats to food safety, ecological environment and human health. Here, we reviewed the potential harms of TCs residues to foodstuff, environment and human beings, discussed the luminescence and aptamer sensors based analytical determination, adsorptive removal, and degradation strategies of TCs residues from a recent 5-year period. The advantages and intrinsic limitations of these strategies have been compared and discussed, the potential challenges and opportunities in TCs residues degradation have also been deliberated and explored.

Zinc Ion-Based Switch-on Fluorescence-Sensing Probes for the Detection of Tetracycline

Tetracycline (TC) is an antibiotic that has been widely used in the animal husbandry. Thus, TC residues may be found in animal products. Developing simple and sensitive methods for rapid screening of TC in complex samples is of great importance. Herein, we demonstrate a fluorescence-sensing method using Zn²⁺ as sensing probes for the detection of TC. Although TC can emit fluorescence under the excitation of ultraviolet light, its fluorescence is weak because of dynamic intramolecular rotations, leading to the dissipation of excitation energy. With the addition of Zn²⁺ prepared in tris(hydroxymethyl)amino-methane (Tris), TC can coordinate with Zn²⁺ in the Zn²⁺-Tris conjugates to form Tris-Zn²⁺-TC complexes. Therefore, the intramolecular motions of TC are restricted to reduce nonradiative decay, resulting in the enhancement of TC fluorescence. Aggregation-induced emission effects also play a role in the enhancement of TC fluorescence. Our results show that the linear dynamic range for the detection of TC is 15-300 nM. Moreover, the limit of detection was ~7 nM. The feasibility of using the developed method for determination of the concentration of TC in a complex chicken broth sample is also demonstrated in this work.

Luminol-Eu-based ratiometric fluorescence probe for highly selective and visual determination of tetracycline

In this work, a ratiometric fluorometric method based on luminol-Europium complex (luminol-Eu) was constructed for the detection of tetracycline (TC). Luminol-Eu, synthesized by self-assembly reaction, displayed a strongly emission peak at 453 nm under excitation at 360 nm which was derived from the aggregation-induced emission (AIE) of the luminol-Eu. In the present of TC, the fluorescence of luminol-Eu at 453 nm was quenched based on inner filter effect (IFE). Meantime, the characteristic emission peak of Eu³⁺ at 626 nm can be observed thank to antenna effect (AE). Therefore, we proposed a ratiometric fluorometric method for detection of TC, which allowed detection of TC from 0.5 to 80 μM with the detection limit of 39 nM. In addition, the luminol-Eu-based test paper was prepared for visual semi-quantitative detection of TC in real samples based on the color of luminol-Eu change from blue to red under 365 nm ultraviolet light. All of those results indicated that the ratiometric fluorometric strategy was fast, sensitive, and visual for detection of TC.

Metal Nanoparticles-Enhanced Biosensors: Synthesis, Design and Applications in Fluorescence Enhancement and Surface-enhanced Raman Scattering

Metal nanoparticles (NP) that exhibit localized surface plasmon resonance play an important role in metal-enhanced fluorescence (MEF) and surface-enhanced Raman scattering (SERS). Among the optical biosensors, MEF and SERS stand out to be the most sensitive techniques to detect a wide range of analytes from ions, biomolecules to macromolecules and microorganisms. Particularly, anisotropic metal NPs with strongly enhanced electric field at their sharp corners/edges under a wide range of excitation wavelengths are highly suitable for developing the ultrasensitive plasmon-enhanced biosensors. In this review, we first highlight the reliable methods for the synthesis of anisotropic gold NPs and silver NPs in high yield, as well as their alloys and composites with good control of size and shape. It is followed by the discussion of different sensing mechanisms and recent advances in the MEF and SERS biosensor designs. This includes the review of surface functionalization, bioconjugation and (directed/self) assembly methods as well as the selection/screening of specific biorecognition elements such as aptamers or antibodies for the highly selective bio-detection. The right combinations of metal nanoparticles, biorecognition element and assay design will lead to the successful development of MEF and SERS biosensors targeting different analytes both in-vitro and in-vivo. Finally, the prospects and challenges of metal-enhanced biosensors for future nanomedicine in achieving ultrasensitive and fast medical diagnostics, high-throughput drug discovery as well as effective and reliable theranostic treatment are discussed.

Europium metal-organic framework for selective and sensitive detection of doxycycline based on fluorescence enhancement

Metal-organic framework is an extended coordination compound with repeating coordination entities and voids, which shows potential applications in gas storage, separation, catalysis, and etc. This work reports the synthesis of a new functional metal-organic framework of pyromellitic acid and europium, and its application in fluorescence sensing of doxycycline, a broad-spectrum polyketide antibiotic on the basis of fluorescence turn-on method. The metal-organic framework was initially non-fluorescent, however, with the addition of doxycycline, the system exhibited significant fluorescence enhancement at 526 nm and 617 nm, where both fluorescence intensities showed good linear correlations with the doxycycline concentration, suggesting the possibility for direct two-channel detection without any sensitization materials such as metal particles or surface-modified quantum dots. More interestingly, the unique fluorescence response of the system could discriminate doxycycline from other tetracycline antibiotics with high selectivity, and a limit of detection (LOD) was estimated to be 47 nM. It has been further demonstrated that the material has been successfully applied as sensing materials for selective determination of doxycycline in real samples of fish and urine.

Ratiometric detection of tetracycline based on gold nanocluster enhanced Eu3+ fluorescence

Tetracycline (TC), a widely-used antibiotic to treat bacterial infections, combines with Eu³⁺ to form a stable EuTC complex that has a low fluorescence (FL) yield because of Eu³⁺ coordination with water molecules. We report a simple, label-free ratiometric fluorescent platform for sensitively and selectively sensing of TC, using L-histidine caped gold nanoclusters (His-AuNCs) as a FL indicator and an enhancer of Eu³⁺ FL. The His-AuNCs were prepared via chemical reduction of Au(III) by L-histidine, which was a reducer and a protecting agent. The His-AuNCs exhibited good photostability, outstanding stability toward high ionic strengths, storage stability, and favorable optical properties. In the absence of TC, the AuNCs-Eu³⁺ system displays strong FL emission at 475 nm (F₄₇₅) from the His-AuNCs and weak FL at 620 nm from Eu³⁺ (F₆₂₀) with excitation at 375 nm. TC quenches the His-AuNC FL and greatly enhances the Eu³⁺ emission. This is attributed to an enhancement of the EuTC complex fluorescence by the His-AuNCs. Thus, a ratiometric F₆₂₀/F₄₇₅ FL signal can be used for TC detection by simply mixing AuNCs and Eu³⁺. Under the optimized conditions, the linear range from 10 nM to 60 μM and a detection limit of 4 nM (S/N = 3) for TC were obtained. The application of the assay platform for the detection of TC in environmental and biological samples was demonstrated. The sensing platform has advantages of easy preparation, rapid response, high sensitivity, and good selectivity.