Synthesis of a palladium acetylide-based tubular microporous polymer monolith via a self-template approach: a potential precursor of supported palladium nanoparticles for heterogeneous catalysis

Processable Conjugated Microporous Polymer Gels and Monoliths: Fundamentals and Versatile Applications

Conjugated microporous polymers (CMPs) as a new type of conjugated polymers have attracted extensive attention in academia and industry because of the combination of microporous structure and π-electron conjugated structure. The construction and application of gels and monoliths based on CMPs constitute a fertile area of research, promising to provide solutions to complex environmental and energy issues. This review summarizes and objectively analyzes the latest advances in the construction and application of processable CMP gels and monoliths, linking the basic and enhanced properties to widespread applications. In this review, we open with a summary of the construction methods used to build CMP gels and monoliths and assess the feasibility of different preparation techniques and the advantages of the products. The CMP gels and monoliths with enhanced properties involving various special applications are then deliberated by highlighting relevant scientific literature and discussions. Finally, we present the issues and future of openness in the field, as well as come up with the major challenges hindering further development, to guide researchers in this field.

Macroscale Conjugated Microporous Polymers: Controlling Versatile Functionalities Over Several Dimensions

Since discovered in 2007, conjugated microporous polymers (CMPs) have been developed for numerous applications including gas adsorption, sensing, organic and photoredox catalysis, energy storage, etc. While featuring abundant micropores, the structural rigidity derived from CMPs' stable π-conjugated skeleton leads to insolubility and thus poor processability, which severely limits their applicability, e.g., in CMP-based devices. Hence, the development of CMPs whose structure can not only be controlled on the micro- but also on the macroscale have attracted tremendous interest. In conventional synthesis procedures, CMPs are obtained as powders, but in recent years various bottom-up synthesis strategies have been developed, which yield CMPs as thin films on substrates or as hybrid materials, allowing to span length scales from individual conjugated monomers to micro-/macrostructures. This review surveys recent advances on the construction of CMPs into macroscale structures, including membranes, films, aerogels, sponges, and other architectures. The focus is to describe the underlying fabrication techniques and the implications which follow from the macroscale morphologies, involving new chemistry and physics in such materials for applications like molecular separation/filtration/adsorption, energy storage and conversion, photothermal transformation, sensing, or catalysis.

Simple synthesis of poly (1,4-bis(dodecyloxy)-2,5-diethynylbenzene)/Pd composites with catalytic activity in Sonogashira coupling reaction

Palladium on the polymeric materials (Pd@polymer) as a catalyst is now very promising due to its great prospect for catalytic application. Such material in the form of composites is found to be stable and can be applied as catalyst in organic synthesis like Sonogashira coupling reaction. In the present work, Pd containing conjugated poly-ynes composites (Poly (1,4-bis(dodecyloxy)-2,5-diethynylbenzene) (Poly-DEB)/Pd) were synthesized by varying the addition of Pd in the range of equivalent weight of 8:4, 8:2 and 8:1, maintaining the fixed amount of 1,4-bis(dodecyloxy)-2,5-diethynylbenzene (DEB) through chemical oxidative polymerization technique. Both FTIR and UV-visible spectroscopy confirmed the interactions between DEB and Pd in the composites. The DSC data revealed the improved melting temperature as well as the crystallinity of the composites than the DEB. The PL spectra showed its florescence property. The catalytic capability of the Poly-DEB/Pd composites were examined using the Sonogashira coupling reactions, which demonstrated good yields. The suggested synthetic protocol is very facile, reproducible and beneficial for the fabrication of diverse mono and bimetallic composites with conjugated polymers. The present study also demonstrates the new example of Poly-DEB/Pd composites catalyzed Sonogashira coupling reaction. These composites have a possibility to develop as a commercial reagent in various organic synthesis subjects to its application prospects.

The use of amino-based functional molecules for the controllable synthesis of noble-metal nanocrystals: a minireview

Controlling the morphologies and structures of noble-metal nanocrystals has always been a frontier field in electrocatalysis. Functional molecules such as capping agents, surfactants and additives are indispensable in shape-control synthesis. Amino-based functional molecules have strong coordination abilities with metal ions, and they are widely used in the morphology control of nanocrystals. In this minireview, we pay close attention to recent advances in the use of amino-based functional molecules for the controllable synthesis of noble-metal nanocrystals. The effects of various amino-based molecules on differently shaped noble-metal nanocrystals, including zero-, one-, two-, and three-dimensional nanocrystals, are reviewed and summarized. The roles and mechanisms of amino-based small molecules and long-chain ammonium salts relating to the morphology-control synthesis of noble-metal nanocrystals are highlighted. Relationships between shape and electrocatalytic properties are also described. Finally, some key prospects and challenges relating to the controllable synthesis of noble-metal nanocrystals and their electrocatalytic applications are proposed.

Fibrous mesoporous polymer monoliths: macromolecular design and enhanced photocatalytic degradation of aromatic dyes

A bottom-up design provides polymer monoliths comprising two monomers that form mesoporous, compressible, random fiber networks, as in marine sponges.

Designing Internal Hierarchical Porous Networks in Polymer Monoliths that Exhibit Rapid Removal and Photocatalytic Degradation of Aromatic Pollutants

This paper describes the preparation of 3D polymer monoliths containing internal hierarchical porosity. The porous networks are fabricated based on Pickering high-internal-phase emulsions (HIPEs) stabilized by microporous β-cyclodextrin-based polymer particles (CDPs) as the emulsifier; CDPs are facilely synthesized by the polyaddition reactions without the need for catalysts. The designed Pickering agents enable to form a bicontinuous internal phase in 8:2 cyclohexane-water v/v, and the oil droplets in the continuous water phase is found to be fairly stable up to 1 month. Furthermore, the addition of acrylamide and N,N'-methylenebis(acrylamide) results in polymer networks after in situ thermal polymerization at 60 °C in the water phase, and the monoliths include both interconnected macropores from the HIPE template and micro- and mesopores from the CDPs embedded at the interface. The porous monoliths rapidly absorb a variety of solvents taking advantage of multiscale porosity and amphiphilicity. Furthermore, the materials can be efficiently used for the removal of aromatic pollutants and then reused after washing and drying without the deterioration of performance. Also, they exhibit high photocatalytic capability and good recyclability as being used as a catalytic support when embedded with titanium dioxide (TiO₂ ).

Monolithic cellulose supported metal nanoparticles as green flow reactor with high catalytic efficiency

A highly effective, stable and reusable flow microreactor was developed by utilizing the environmentally sustainable porous monolithic cellulose based on a facile temperature induced phase separation (TIPS) method. The obtained microreator could be applied to efficiently and continuously catalysing the reduction reaction of 4-nitrophenol (an important reaction in water treatment) without any post-treatment or regeneration of catalysts. Moreover, the monolith overcame the brittleness of the crystalline cellulose and showed a good mechanical resilience, suggesting a great potential for the practical application in severe environment. Compared with previous reported Pd supported catalytic systems, this microreactor exhibited extremely high catalytic efficiency (turnover frequency, TOF = 4660 h^-1, almost 4 times higher than that of cellulose nanocrystals supported catalyst) and long-term stability. This work provided a new strategy to construct highly effective and reusable metal NPs involved catalytic system by utilizing biodegradable cellulose materials.