Spherical covalent organic frameworks as advanced adsorbents for preconcentration and separation of phenolic endocrine disruptors, followed by high performance liquid chromatography

Preparation of amino-functionalized triazine-based hyper-crosslinked polymer for efficient adsorption of endocrine disruptors

Herein, two novel amino-functionalized triazine-based hyper-crosslinked porous polymer (NH2-HCPs) (named as DPT-BB, DPT-DX) were designed and synthesized by direct crosslinking of 2,4-diamino-6-phenyl-1,3,5-triazine (DPT) with 4,4'-bis(chloromethyl)-1,1'-biphenyl (BB) or α, α'-dichloro-p-xylene (DX). Thanks to the amino functional group and hyper-crosslinked porous structure, NH2-HCPs displayed remarkable adsorption ability for phenolic EDCs. The adsorption mechanism mainly involved hydrogen bond, π-π interaction, hydrophobic interaction and pore filling. Thus DPT-BB was applied as solid phase extraction sorbent to extract phenolic EDCs from water and orange juice samples prior to quantitative analysis by high performance liquid chromatography. Under the optimal conditions, detection limit as low as 0.07-0.2 ng mL-1 for water and 0.1-0.27 ng mL-1 for orange juice was achieved. Good recoveries spanned the range of 83.5%-114% were obtained for spiked samples, with relative standard deviations below 8.9%. The results demonstrated that the developed method displayed excellent practicability for sensitive analysis of EDCs.

A molecularly imprinted polymer monolithic column with dual template and bifunctional monomers for selective extraction and simultaneous determination of eight phenolics from polycarbonate cups

A molecularly imprinted polymer (MIP) monolithic column was prepared in situ in a pipette tip using phenol and bisphenol A as dual templates, 4-vinyl pyridine and β-cyclodextrin as bifunctional monomers. It was used for the selective and simultaneous solid phase extraction of eight phenolics, including phenol, m-cresol, p-tert-butylphenol, bisphenol A, bisphenol B, bisphenol E, bisphenol Z, and bisphenol AP. The MIP monolithic column was characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, thermogravimetric analysis and nitrogen adsorption experiment. The results of selective adsorption experiments showed that the MIP monolithic column can selective recognize the phenolics and have excellent adsorption property. The imprinting factor for bisphenol A can be as high as 4.31, and the maximum adsorption capacity for bisphenol Z can reach 201.66 mg g^-1. Under the optimal extraction conditions, a selective and simultaneous extraction and determination method for eight phenolics was established based on the MIP monolithic column and high-performance liquid chromatography with ultraviolet detection. The linear ranges (LRs) of the eight phenolics were 0.5-200 μg L^-1, the limits of quantification (LOQs) and detection (LODs) were 0.5-2.0 μg L^-1 and 0.15-0.67 μg L^-1. The method was applied to detect the migration quantity of the eight phenolics from polycarbonate cups and had satisfactory recovery. The method has the advantages of simple synthesis, short extraction time, as well as good repeatability and reproducibility, which provides a sensitive and reliable strategy for extracting and detecting phenolics from food contact material.

[Application progress of covalent organic framework materials in extraction of toxic and harmful substances]

Toxic and hazardous substances constitute a category of compounds that are potentially hazardous to humans, other organisms, and the environment. These substances include pesticides (benzoylureas, pyrethroids, neonicotinoids), persistent organic pollutants (polycyclic aromatic hydrocarbons, polychlorinated biphenyls, perfluorinated compounds), plasticizers (phthalate esters, phenolic endocrine disruptors), medicines (sulfonamides, non-steroid anti-inflammatory drugs, tetracyclines, fluoroquinone antibiotics), heterocyclic aromatic amines, algal toxins, and radioactive substances. Discharge of these toxic and harmful substances, as well as their possible persistence and bioaccumulation, pose a major risk to human health, often to the extent of being life-threatening. Therefore, it is important to analyze and detect toxic and hazardous substances in the environment, drinking water, food, and daily commodities. Sample pretreatment is an imperative step in most of the currently used analytical methods, especially in the analysis of trace toxic and harmful substances in complex samples. An efficient and fast sample pretreatment technology not only helps improve the sensitivity, selectivity, reproducibility, and accuracy of analytical methods, but also avoids contamination of the analytical instruments and even damages the performance and working life of instruments. Sample pretreatment techniques widely used in the extraction of toxic and hazardous substances include solid-phase extraction (SPE), solid-phase microextraction (SPME), and dispersed solid-phase extraction (DSPE). The adsorbent material plays a key role in these pretreatment techniques, thereby determining their selectivity and efficiency. In recent years, covalent organic frameworks (COFs) have attracted increasing attention in sample pretreatment. COFs represent an exciting new class of porous crystalline materials constructed via the strong covalent bonding of organic building units through a reversible condensation reaction. COFs present four advantages: (1) precise control over structure type and pore size by consideration of the target molecular structure based on the connectivity and shape of the building units; (2) post-synthetic modification for chemical optimization of the pore interior toward optimized interaction with the target; (3) straightforward scalable synthesis; (4) feasible formation of composites with magnetic nanoparticles, carbon nanotubes, graphene, silica, etc., which is beneficial to enhance the performance of COFs and meet the requirement of diverse pretreatment technologies. Because of the well-defined crystalline porous structures and tailored functionalities, COFs have excellent potential for use in target extraction. However, some issues need to be addressed for the application of COFs in the extraction of toxic and hazardous substances. (1) For the sample matrix, most of the reported COFs are highly hydrophobic, which limits their dispersibility in water-based samples, leading to poor extraction performance. COFs with good dispersibility in water-based samples are urgently required. (2) Besides, COFs rely on hydrophobic interaction, size repulsion, π-π stacking, and Van der Waals forces to extract target substances, but they are not effective for some polar targets. Thus, it is necessary to develop COFs with high affinity for polar toxic and hazardous substances. (3) Methods for the synthesis of COFs have evolved from solvothermal methods to room-temperature methods, mechanical grinding, microwave-assisted synthesis, ion thermal methods, etc. Most of the existing methods are time-consuming, laborious, and environmentally unfriendly. The starting materials are too expensive to prepare COFs in large quantities. More effort is required to improve the synthesis efficiency and overcome the obstacles in the application of COFs for extraction. This article summarizes and reviews the research progress in COFs toward the extraction of toxic and hazardous substances in recent years. Finally, the application prospects of COFs in this field are summarized, which serves as a reference for further research into pretreatment technologies based on COFs.

Recent Advances in the Application of Covalent Organic Frameworks in Extraction: A Review

Covalent organic frameworks (COFs) are a class of emerging materials that are synthesized based on the covalent bonds between different building blocks. COFs possess unique attributes in terms of high porosity, tunable structure, ordered channels, easy modification, large surface area, and great physical and chemical stability. Due to these features, COFs have been extensively applied as adsorbents in various extraction modes. Enhanced extraction performance could be reached with modified COFs, where COFs are presented as composites with other materials including nanomaterials, carbon and its derivatives, silica, metal-organic frameworks, molecularly imprinted polymers, etc. This review article describes the recent advances, developments, and applications of COF-based materials being utilized as adsorbents in the extraction methods. The COFs, their properties, their synthesis approaches as well as their composite structures are reviewed. Most importantly, suggested mechanisms for the extraction of analyte(s) by COF-based materials are also discussed. Finally, the current challenges and future prospects of COF-based materials in extraction methods are summarized and considered in order to provide more insights into this field.

Covalent Organic Framework-Mediated Thin-Film Composite Polyamide Membranes toward Precise Ion Sieving

Covalent organic frameworks (COFs) have evinced a potential solution that promises for fast and efficient molecular separation due to the presence of orderly arranged pores and regulable pore apertures. Herein, the synthesized COF (TPB-DMTP-COF) with the pore aperture matching the pore size of the nanofiltration (NF) membrane was utilized to modulate the physicochemical characters of the polyamide (PA) membranes. It is demonstrated that COFs with superior polymer affinity and hydrophilicity not only circumvent the nonselective interfacial cavities but also improve the hydrophilicity of the resultant thin-film nanocomposite (TFN) membranes. Furthermore, the predeposited COF layer is able to slow down the diffusion rate toward the reaction boundary through hydrogen bonding, which is consistent with the results of molecular dynamic (MD) and dissipative particle dynamic (DPD) simulations. In this context, COF-modulated TFN membranes show a roughened and thickened surface with bubble-shaped structures in contrast to the nodular structure of original polyamide membranes. Combined with the introduced in-plane pores of COFs, the resultant TFN membranes display a significantly elevated water permeance of 35.7 L m² h^-1 bar^-1, almost 4-fold that of unmodified polyamide membranes. Furthermore, the selectivity coefficient of Cl^-/SO₄^2- for COF-modulated TFN membranes achieves a high value of 84 mainly related to the enhanced charge density, far exceeding the traditional NF membranes. This work is considered to provide a guideline of exploring hydrophilic COFs as an interlayer for constructing highly permeable membranes with precise ion-sieving ability.

Covalent organic framework-V modified porous polypropylene hollow fiber with detachable dumbbell-shaped structure for stir bar sorptive extraction of benzophenones

Polypropylene hollow fiber is a kind of ideal material for stir bar sorptive extraction (SBSE) which possesses the advantages of porous structure, large specific surface area, high mechanical strength, and good solvent resistance. In this work, a novel SBSE device using the polypropylene hollow fiber-based stir bar with the detachable dumbbell-shaped structure was designed and prepared. Covalent organic framework-V (COF-V), which possesses porous structure, sphere shape with large specific surface area, was synthesized at room temperature and grown on polypropylene hollow fiber by polydopamine modification method. Compared with previous studies which used etched poly(ether ether ketone) as supporting material, polypropylene hollow fiber omitted the complicated, difficult and dangerous pretreatment process with high concentrated sulfuric acid. The immobilization of COF-V on the polypropylene hollow fiber significantly endows them with multiple interaction abilities including hydrophobic interaction and π-π interaction. The stir bar showed good performance and stability for the extraction of four benzophenones including BP-1, BP-6, BP-3 and Ph-BP. By coupling with HPLC-UV, the COF-V@polypropylene hollow fiber based SBSE method showed wide linear range (0.1-200 ng/mL), excellent linearity (R² ≥ 0.9979), high sensitivity (LODs in the range of 0.02-0.03 ng/mL), and good repeatability (RSD ≤ 5.21%). This method was successfully applied to the analysis of benzophenones in soil and sunscreen samples.

Preparation of a Novel Resin Based Covalent Framework Material and Its Application in the Determination of Phenolic Endocrine Disruptors in Beverages by SPE-HPLC

A new type of economical covalent organic framework material(COF), namely resin based covalent organic framework material, was prepared by combining resin and covalent organic framework material by hydrothermal synthesis, which was based on the preparation of traditional COF material(TpBD COF). The properties of the material and covalent organic framework material were compared in the way of characterization, and the possible reaction mechanism was analyzed. The solid phase extraction separation (SPE) ability of this material for four kinds of phenolic endocrine disrupting compounds (bisphenol F, bisphenol A, octylphenol and nonylphenol) in beverage samples was investigated. The results showed that the prepared COF materials had abundant internal channels, ordered structure, large specific surface area (TpBD COF: 814.6 m2/g and resin based COF: 623.9 m2/g) and good thermal stability (pyrolysis temperature was 443 °C and 437 °C, respectively). Solid phase extraction experiments demonstrated that the two COF materials as adsorbent of solid phase extraction column had ideal adsorption separation effect and good anti-interference ability, and had strong anti-interference ability. The SPE effect was superior to the traditional solid phase extraction column. The precision RSD of this method was less than 3%. This SPE method had high recovery and could be reused (carbonated beverage: 98.18-102.18% and beverage: 98.52-101.79%), In addition, the recovery of the material did not change significantly in the 50 cycles of solid phase extraction, indicating that the material had good stability and could be reused, which could meet the requirements for the detection and analysis of trace pollutants in environmental samples. The resin based COF material prepared in this study could reduce the cost of monomer uses and provide a possibility for its industrial production. At the same time, as an efficient SPE adsorbent, it also provided a new research scheme for the enrichment of trace phenolic endocrine disruptors in beverage samples.

Facile synthesis of spherical covalent organic frameworks as stationary phases for short-column liquid chromatography

Micron-sized spherical covalent organic frameworks (SCOFs) with tunable sizes, narrow size distribution, and significant mono-dispersity were simply synthesized at room temperature. Thanks to their high specific surface areas, high chemical and mechanical stability, the SCOFs were used for the first time as stationary phases for high-efficiency separation of various small molecules and protein digests via short-column liquid chromatography.

Highly Efficient Silver Catalyst Supported by a Spherical Covalent Organic Framework for the Continuous Reduction of 4-Nitrophenol

Developing new materials and novel technologies for the highly efficient treatment of toxic organic pollutants is highly desirable. Chemical reduction based on heterogeneous substrate/noble metal catalysts and the reducing agent NaBH₄ has become an effective method in recent years. Here, a spherical covalent organic framework (SCOF) was designed to provide basic sites for Ag ions, by which small Ag NPs were immobilized on the SCOF to form Ag NPs@SCOF microspheres. The prepared microspheres exhibited a high catalytic reduction ability toward 4-nitrophenol (4-NP). An optimized permeation flux of 2000 L m^-2 h^-1 (LMH) and a more than 99% 4-NP reduction efficiency were obtained with flow-through experiments, which are far better than the reported results (below 200 LMH). Moreover, the microspheres could maintain stable catalytic performance under a continuous flow-through process. Our work provides an efficient material and technology that can be applied to easily treat toxic organic pollutants.

Covalent organic frameworks: an ideal platform for designing ordered materials and advanced applications

Covalent organic frameworks offer a molecular platform for integrating organic units into periodically ordered yet extended 2D and 3D polymers to create topologically well-defined polygonal lattices and built-in discrete micropores and/or mesopores.

Covalent Organic Frameworks in Sample Preparation

Covalent organic frameworks (COFs) can be classified as emerging porous crystalline polymers with extremely high porosity and surface area size, and good thermal stability. These properties have awakened the interests of many areas, opening new horizons of research and applications. In the Analytical Chemistry field, COFs have found an important application in sample preparation approaches since their inherent properties clearly match, in a good number of cases, with the ideal characteristics of any extraction or clean-up sorbent. The review article is meant to provide a detailed overview of the different COFs that have been used up to now for sample preparation (i.e., solid-phase extraction in its most relevant operational modes-conventional, dispersive, magnetic/solid-phase microextraction and stir-bar sorptive extraction); the extraction devices/formats in which they have been applied; and their performances and suitability for this task.

The magnetic covalent organic framework as a platform for high-performance extraction of Cr(VI) and bisphenol a from aqueous solution

The magnetic covalent organic framework with β-ketoenamine linkage (Fe₃O₄@COF(TpPa-1)) was fabricated by the hydrothermal method. The obtained Fe₃O₄@TpPa-1 integrated four advantages, namely easy preparation, high stability, excellent adsorption performance (485.2 m²/g) and good recoverability (19.5 emu/g), which enabled it an ideal sorbent for wastewater treatment. Fe₃O₄@TpPa-1 exhibited excellent adsorption capacities for Cr (VI) (245.45 mg/g) and bisphenol A (1220.97 mg/g). The adsorption kinetics and isotherms were in alignment to the pseudo-second-order and Langmuir model, respectively. After five times cycles, the adsorption capacity of Fe₃O₄@TpPa-1 still retained at a high level. According to Materials Studio simulation and XPS analysis, the adsorption mechanism was attributed to the presence of the homogeneously distributed imine and carbonyl functional groups in the framework of TpPa-1, allowing them to serve as platforms for anchoring heavy metals and organic pollutants. Besides, the hydrophobic skeleton structures of TpPa-1 endowed them good adsorption performance towards organic pollutants via hydrogen -bonding (NH^…O^…HO) and π-π interaction. Therefore, the recyclable Fe₃O₄@TpPa-1 showed a broad application prospects in environmental remediation.

Integration of Fe3O4@UiO-66-NH2@MON core-shell structured adsorbents for specific preconcentration and sensitive determination of aflatoxins against complex sample matrix

Aflatoxins have been a hot topic in the field related into public health and ecosystem protection, and great effort has been made in developing of adsorptive materials for effective probing the target aflatoxins. Conventional materials, like metal-organic frameworks (MOFs) showed promising application in separation science. However, the cumbersome separation process, competitive adsorption are also major challenges. Regarding this, a novel magnetic micro-composite denoted as Fe₃O₄@UiO-66-NH₂@MON with core-shell structure was constructed. The core of Fe₃O₄ microspheres was coated with MOFs crystals, and then microporous organic network (MON) was introduced onto the surface of Fe₃O₄@UiO-66-NH₂ through a sonogashira coupling reaction. It exhibited good magnetic separation ability, which effectively simplified the pre-treatment steps. The proposed method possessed excellent selectivity and sensitivity, with detection limits in the range of 0.15-0.87 μg L^-1 combination with HPLC analysis. More importantly, the MON coating significantly improved the hydro-stability of whole adsorbents, thus enhancing the adsorption efficiency and favoring the practical application of the materials. The developed Fe₃O₄@UiO-66-NH₂@MON-based solid extraction method has been well-applied for real sample analysis, with the recovery of 87.3%-101.8%. We believe the newly-constructed hybrid nano-adsorbents hold great potential in further application in various analytical methods for different target analytes.

Recyclable magnetic covalent organic framework for the extraction of marine biotoxins

A novel procedure for the preparation of magnetic covalent organic frameworks (COFs) is reported. In situ functionalization of Fe3O4 with dopamine rapidly afforded amino-functionalized magnetic nanoparticles, which after decoration with a COF building block and subsequent COF growth gave access to magnetic composite mTpBD-Me2. The optimized synthesis conditions yielded crystalline and superparamagnetic material with no loss in surface area as compared to bulk COF. The composite material was employed for the first time in magnetic solid-phase extraction of marine biotoxins from seawater with high efficiency, where calculated maximum adsorption capacities of 812 mg g-1 and 830 mg g-1 were found for okadaic acid (OA) and dinophysistoxin-1 (DTX-1), respectively, corresponding to an increase of ∼500-fold for OA and ∼300-fold for DTX-1 as compared to the commonly used non-magnetic macroporous resins. Nearly quantitative desorption efficiency of both biotoxins was obtained using 2-propanol as solvent, rendering the composite materials recyclable with merely minor losses in adsorption capacity after five consecutive cycles of adsorption/desorption. In addition, retention of crystallinity after the adsorption cycles highlights the stability of the composite in seawater. These results illustrate the great efficiency of the novel material in biotoxin adsorption and show great promise for its application in environmental monitoring programs.