Excellent binding effect of l-methionine for immobilizing silver nanoparticles onto cotton fabrics to improve the antibacterial durability against washing

Antimicrobial Coatings for Medical Textiles via Reactive Organo-Selenium Compounds

Bleached and cationized cotton fabrics were chemically modified with reactive organoselenium compounds through the nucleophilic aromatic substitution (SNAr) reaction, which allowed for organo-selenium attachment onto the surface of cotton fabrics via covalent bonds and, in the case of the cationized cotton fabric, additional ionic interactions. The resulting textiles exhibited potent bactericidal activity against S. aureus (99.99% reduction), although only moderate activity was observed against E. coli. Fabrics treated with reactive organo-selenium compounds also exhibited fungicidal activities against C. albicans, and much higher antifungal activity was observed when organo-selenium compounds were applied to the cationized cotton in comparison to the bleached cotton. The treatment was found to be durable against rigorous washing conditions (non-ionic detergent/100 °C). This paper is the first report on a novel approach integrating the reaction of cotton fabrics with an organo-selenium antimicrobial agent. This approach is attractive because it provides a method for imparting antimicrobial properties to cotton fabrics which does not disrupt the traditional production processes of a textile mill.

Silver nanoparticles deposited on a cotton fabric surface via an in situ method using reactive hyperbranched polymers and their antibacterial properties

This study introduces a new method for the synthesis of silver nanoparticles on a cotton fabric surface by an in situ method. Reactive hyperbranched polymer (EPDA-HBP) was synthesized using epoxy chloropropane dimethylamine and amino hyperbranched polymer. Then, the fabric was modified with reactive hyperbranched polymer to obtain the amino-grafted fabric. The prepared fiber can complex Ag+ and convert Ag+ to Ag0 through the reducibility of amino acids. EPDA-HBP-grafted cotton fibers and silver nanoparticle-coated fibers were then characterized by FTIR, antibacterial, FE-SEM, EDS, and XPS methods. FE-SEM, EDS, and XPS indicated that Ag NPs were uniformly coated on the cotton fabric. FTIR results confirmed that EPDA-HBP was grafted onto the surface of cotton fiber. When the Ag content was more than 180 mg kg-1, the treated cotton fabric showed above 99.9% bacterial reduction against Escherichia coli and Staphylococcus aureus.

Durably antibacterial cotton fabrics coated by protamine via Schiff base linkages

The development of antibacterial cotton fabrics with an overall performance is critical but remains challenging. In this study, we propose a facile method to prepare durable antibacterial cotton fabric without significant sacrifices of wearing comfortability. Cotton fabric is firstly oxidated to obtain dialdehyde groups, then treated with PM molecules to establish a PM coating on the fiber surfaces via Schiff base linkages. The resultant cotton fabrics show durably antibacterial activity, realizing high bacterial reduction rates against both E. coli and S. aureus higher than 99.99 %, and offering remarkable durabilities tolerable 50 washing cycles and 500 rubbing times. These fabrics also show reliable safety for human skin that proofed by a series of cytotoxicity tests with positive results. This work demonstrates an example of versatile strategy to impart effective antibacterial function with durable activity to cotton textiles, showing great potential for practical applications in functional textile fields.

The State of the Art and Challenges of In Vitro Methods for Human Hazard Assessment of Nanomaterials in the Context of Safe-by-Design

The Safe-by-Design (SbD) concept aims to facilitate the development of safer materials/products, safer production, and safer use and end-of-life by performing timely SbD interventions to reduce hazard, exposure, or both. Early hazard screening is a crucial first step in this process. In this review, for the first time, commonly used in vitro assays are evaluated for their suitability for SbD hazard testing of nanomaterials (NMs). The goal of SbD hazard testing is identifying hazard warnings in the early stages of innovation. For this purpose, assays should be simple, cost-effective, predictive, robust, and compatible. For several toxicological endpoints, there are indications that commonly used in vitro assays are able to predict hazard warnings. In addition to the evaluation of assays, this review provides insights into the effects of the choice of cell type, exposure and dispersion protocol, and the (in)accurate determination of dose delivered to cells on predictivity. Furthermore, compatibility of assays with challenging advanced materials and NMs released from nano-enabled products (NEPs) during the lifecycle is assessed, as these aspects are crucial for SbD hazard testing. To conclude, hazard screening of NMs is complex and joint efforts between innovators, scientists, and regulators are needed to further improve SbD hazard testing.

Interesting Halophilic Sulphur-Oxidising Bacteria with Bioleaching Potential: Implications for Pollutant Mobilisation from Mine Waste

For many years, research on the microbial-dissolution of metals from ores or waste materials mainly focussed on the study of acidophilic organisms. However, most acidophilic bioleaching microorganisms have limited tolerance to high chloride concentrations, thereby requiring fresh water for bioleaching operations. There is a growing interest in the use of seawater for leaching purposes, especially in regions with less access to fresh water. Consequently, there is a need to find halophilic organisms with bioleaching potentials. This study investigated the bioleaching potentials of four moderately halophilic sulphur-oxidising bacteria: Thiomicrospira cyclica, Thiohalobacter thiocyanaticus, Thioclava electrotropha and Thioclava pacifica. Results revealed T. electrotropha and T. pacifica as the most promising for bioleaching. Pure cultures of the two Thioclava strains liberated about 30% Co, and between 8-17% Cu, Pb, Zn, K, Cd, and Mn from a mine waste rock sample from the Neves Corvo mine, Portugal. Microwave roasting of the waste rock at 400 and 500 °C improved the bioleaching efficiency of T. electrotropha for Pb (13.7 to 45.7%), Ag (5.3 to 36%) and In (0 to 27.4%). Mineralogical analysis of the bioleached residues using SEM/MLA-GXMAP showed no major difference in the mineral compositions before or after bioleaching by the Thioclava spp. Generally, the bioleaching rates of the Thioclava spp. are quite low compared to that of the conventional acidophilic bioleaching bacteria. Nevertheless, their ability to liberate potential pollutants (metal(loid)s) into solution from mine waste raises environmental concerns. This is due to their relevance in the biogeochemistry of mine waste dumps, as similar neutrophile halophilic sulphur-oxidising organisms (e.g., Halothiobacillus spp.) have been isolated from mine wastes. On the other hand, the use of competent halophilic microorganisms could be the future of bioleaching due to their high tolerance to Cl^- ions and their potential to catalyse mineral dissolution in seawater media, instead of fresh water.

Self-induced transformation of raw cotton to a nanostructured primary cell wall for a renewable antimicrobial surface

Herein, raw cotton is shown to undergo self-induced transformation into a nanostructured primary cell wall. This process generates a metal nanoparticle-mediated antimicrobial surface that is regenerable through multiple washings. Raw cotton, without being scoured and bleached, contains noncellulosic constituents including pectin, sugars, and hemicellulose in its primary cell wall. These noncellulosic components provide definitive active binding sites for the in situ synthesis of silver nanoparticles (Ag NPs). Facile heating in an aqueous solution of AgNO3 activated raw cotton to produce Ag NPs (ca. 28 nm in diameter and 2261 mg kg-1 in concentration). Compared with scoured and bleached cotton, raw cotton requires lower concentrations of AgNO3-ten times lower for Klebsiella pneumonia and two times lower for Staphylococcus aureus-to achieve 99.9% reductions of both Gram-positive and Gram-negative bacteria. The Ag NPs embedded in the primary cell wall, which was confirmed via transmission electron microscopy images of the fiber cross-sections, are immobilized, exhibiting resistance to leaching as judged by continuous laundering. A remarkable percentage (74%) of the total Ag NPs remained in the raw cotton after 50 laundering cycles.

Design, Structural Characteristic and Antibacterial Performance of Silver-Containing Cotton Fiber Nanocomposite

In the present study, cotton fiber was treated with phosphorus trichloride in the presence of oxygen. As a result of the subsequent hydrolysis of modified cotton fibers, phosphorus-containing fragments with acidic groups and chlorine atoms were introduced onto their surface. Afterward, silver-containing composites based on raw and modified cotton fibers were prepared using the chemical reduction method. The obtained samples were characterized in detail by Fourier transform infrared spectroscopy, ultraviolet-visible spectroscopy, X-ray powder diffraction, as well as by thermogravimetric analysis, scanning electron microscopy, and energy-dispersive X-ray analysis. A comparative bioassay experiment of four samples for gram-negative (Escherichia coli) bacteria, gram-positive (Staphylococcus aureus) bacteria, and the fungus Candida albicans was carried out. These results showed the predominant antibacterial activity of the phosphorylated sample and the composite based on it. Thus, the development of these antibacterial cotton fibers using readily available reagents under relatively mild conditions could be used as potential industrial applications for the production of everyday medical textiles.

Reactive silver inks for antiviral, repellent medical textiles with ultrasonic bleach washing durability compared to silver nanoparticles

Medical textiles are subject to particularly harsh disinfection procedures in healthcare settings where exposure risks are high. This work demonstrates a fabric treatment consisting of a reactive silver ink and low surface energy PDMS polymer that provides for superhydrophobicity and antiviral properties against enveloped herpes simplex virus stocks even after extended ultrasonic bleach washing. The antiviral properties of reactive silver ink has not been previously reported or compared with silver nanoparticles. The fabric treatment exhibits high static contact angles and low contact angle hysteresis with water, even after 300 minutes of ultrasonic bleach washing. Similarly, after this bleach washing treatment, the fabric treatment shows reductions of infectious virus quantities by about 2 logs compared to controls for enveloped viruses. The use of silver ink provides for better antiviral efficacy and durability compared to silver nanoparticles due to the use of reactive ionic silver, which demonstrates more conformal coverage of fabric microfibers and better adhesion. This study provides insights for improving the wash durability of antiviral silver fabric treatments and demonstrates a bleach wash durable, repellent antiviral treatment for reusable, functional personal protective equipment applications.

The Impact of Atmospheric Plasma/UV Laser Treatment on the Chemical and Physical Properties of Cotton and Polyester Fabrics

Atmospheric plasma treatment can modify fabric surfaces without affecting their bulk properties. One recently developed, novel variant combines both plasma and UV laser energy sources as a means of energising fibre surfaces. Using this system, the two most commonly used fibres, cotton and polyester, have been studied to assess how respective fabric surfaces were influenced by plasma power dosage, atmosphere composition and the effects of the presence or absence of UV laser (308 nm XeCl) energy. Plasma/UV exposures caused physical and chemical changes on both fabric surfaces, which were characterised using a number of techniques including scanning electron microscopy (SEM), radical scavenging (using 2,2-diphenyl-1-picrylhydrazyl (DPPH)), thermal analysis (TGA/DTG, DSC and DMA), electron paramagnetic resonance (EPR) and X-ray photoelectron spectroscopy (XPS). Other properties studied included wettability and dye uptake. Intermediate radical formation, influenced by plasma power and presence or absence of UV, was key in determining surface changes, especially in the presence of low concentrations of oxygen or carbon dioxide (20%) mixed with either nitrogen or argon. Increased dyeability with methylene blue indicated the formation of carboxyl groups in both exposed cotton and polyester fabrics. In the case of polyester, thermal analysis suggested increased cross-linking had occurred under all conditions.

Silver Nanoparticle-Anchored Human Hair Kerateine/PEO/PVA Nanofibers for Antibacterial Application and Cell Proliferation

The main core of wound treatment is cell growth and anti-infection. To accelerate the proliferation of fibroblasts in the wound and prevent wound infections, various strategies have been tried. It remains a challenge to obtain good cell proliferation and antibacterial effects. Here, human hair kerateine (HHK)/poly(ethylene oxide) (PEO)/poly(vinyl alcohol) (PVA) nanofibers were prepared using cysteine-rich HHK, and then, silver nanoparticles (AgNPs) were in situ anchored in the sulfur-containing amino acid residues of HHK. After the ultrasonic degradation test, HHK/PEO/PVA nanofibrous mats treated with 0.005-M silver nitrate were selected due to their relatively complete structures. It was observed by TEM-EDS that the sulfur-containing amino acids in HHK were the main anchor points of AgNPs. The results of FTIR, XRD and the thermal analysis suggested that the hydrogen bonds between PEO and PVA were broken by HHK and, further, by AgNPs. AgNPs could act as a catalyst to promote the thermal degradation reaction of PVA, PEO and HHK, which was beneficial for silver recycling and medical waste treatment. The antibacterial properties of AgNP-HHK/PEO/PVA nanofibers were examined by the disk diffusion method, and it was observed that they had potential antibacterial capability against Gram-positive bacteria, Gram-negative bacteria and fungi. In addition, HHK in the nanofibrous mats significantly improved the cell proliferation of NIH3T3 cells. These results illustrated that the AgNP-HHK/PEO/PVA nanofibrous mats exhibited excellent antibacterial activity and the ability to promote the proliferation of fibroblasts, reaching our target applications.

Preparation of Ag NPs and Its Multifunctional Finishing for Cotton Fabric

To explore the combination of silver nanoparticles (Ag NPs) prepared in a green manner with cotton fabrics and the washing durability of the fabric after the combination. In this paper, the natural material, honeysuckle extract, was used as a reducing agent to prepare the Ag NPs' solution. The structure and size of Ag NPs were analyzed using ultraviolet-visible spectrophotometry (UV-vis), transmission electron microscopy (TEM), dynamic light scattering (DLS), X-ray powder diffraction (XRD), and Fourier transform infrared (FT-IR) spectroscopy characterization. The results showed that Ag+ was successfully reduced to Ag0 by the honeysuckle extract, the particle size was about 10.59 nm, and the potential was -42.9 mV, so it had strong electrostatic repulsion and good stability. Meanwhile, it was found that the synthesized Ag NPs were well coated by the honeysuckle extract, so they would not aggregate. Then, the cotton fabric was finished with Ag NPs' solution by the dipping method using a complex of polymaleic acid (PMA) and citric acid (CA) as a cross-linking agent to fix Ag NPs on the cotton fabric. The structures of cotton fabrics before and after finishing were characterized using FT-IR, scanning electron microscopy (SEM), XRD, X-ray photoelectron spectroscopy (XPS), and thermogravimetric (TG) analysis, and the multifunctional properties of the finished cotton fabrics were explored by measuring the antibacterial rate, the wrinkle recovery angle (WRA), and the UV protection factor (UPF) value. The results show that Ag NPs were successfully loaded onto cotton fabric, and the PMA + CA compound was successfully cross-linked to the fabric. The cross-linked Ag NPs' cotton fiber was rougher than that before cross-linking, and its TG stability improved. The PMA + CA compound fixed Ag NPs on the cotton fabric through chemical bonds, so it still had a 99% antibacterial effect against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) after 50 washings. Compared with unfinished cotton fabric, the UPF value and WRA of the cross-linked Ag NPs cotton increased by 34.09 and 98°, respectively, and its color did not change much.

Silver Nanoparticle-Infused Cotton Fiber: Durability and Aqueous Release of Silver in Laundry Water

Although the application of silver nanoparticles to commercial antibacterial items is well-established, there have been increasing concerns that such particles might leach out, particularly into laundry water from textile products. A recently developed process wherein silver nanoparticles are synthesized in situ within the cotton fiber itself promises, however, to achieve the desired washing durability. In this study, the silver release behavior of the silver nanoparticle-infused cotton fabric during consecutive launderings in water and a detergent solution was analyzed. Silver nanoparticles (12 ± 3 nm in diameter) were uniformly produced throughout the entire volume of cotton fiber with a concentration of 3017 ± 56 mg/kg. A combination of colorimetric, spectroscopic, and elemental analyses showed (1) nonlinear silver release behavior, with a rapid release from externally formed nanoparticles during the initial washing and a plateau-like release from internally formed nanoparticles during extended washing, and (2) superior nanoparticle-leach resistance compared to those in commercial and laboratory-prepared textiles analyzed in the literature. The internal nanoparticles immobilized within cotton fiber exhibited persistent antibacterial activity after 50 home laundering cycles.

Structure and properties of carboxymethyl cotton fabric loaded by reduced graphene oxide

Cotton fiber is a natural polysaccharide material with excellent properties, which is widely used in textile industry. However, the poor ultraviolet (UV) protection and electrical conductivity limit its application in other fields. In this study, reduced graphene oxide (rGO) loaded carboxymethyl cotton fabrics were prepared by layer-by-layer (LBL) self-assembly technique. The structure and surface morphology of the fabrics were studied by K/S value, scanning electron microscopy (SEM), and Fourier transform infrared spectroscopy (FTIR). Furthermore, the electrical conductivity, thermal properties, light absorption properties and UV protection properties of rGO-loaded carboxymethyl cotton fabrics were also studied. The results indicated that rGO-loaded fabrics possessed excellent electrical conductivity, UV protection properties and high light absorption. In addition, washing durability of rGO-loaded carboxymethyl cotton fabric is very good. This technique provides a simple method for people to prepare multifunctional cotton fabrics.