Ultrasensitive detection of low-ppm H2S gases based on palladium-doped porous silicon sensors

Effective Reinforcement of Visible Light Photocatalytic and Gas Sensing Characteristics of Nanocrystalline TiO2: Gd-Based Nb and Mo Dopants

Efficient compositions for the selective detection of ethanol gas and the removal of organic contaminants were realized by codoping of (Gd, Nb) and (Gd, Mo) ions into TiO2. TiO2, Ti0.96Gd0.01Nb0.03O2, and Ti0.96Gd0.01Mo0.03O2 samples were prepared by a coprecipitation method. For all compositions, a crystalline anatase phase of TiO2 was detected. Compared to pure TiO2, the absorption edges of Ti0.96Gd0.01Nb0.03O2 and Ti0.96Gd0.01Mo0.03O2 samples were red-shifted, further broadening towards visible light. The morphological studies demonstrate that the grains of TiO2 were more refined after (Gd, Nb) and (Gd, Mo) codoping. The photocatalytic efficiency of the Ti0.96Gd0.01Mo0.03O2 catalyst for degrading 20 mg/L reactive yellow 145, brilliant green, and amoxicillin was 98, 95, and 93% in 90 min, respectively. The reusability experiments indicate that the Ti0.96Gd0.01Mo0.03O2 catalyst had high stability during reuse. The high photocatalytic activity of the Ti0.96Gd0.01Mo0.03O2 catalyst was correlated to the broad visible-light absorption and effective separation of electron-hole pairs by Gd3+ and Mo6+ cations. The gas sensing characteristic is reflected by the high sensitivity of the Ti0.96Gd0.01Nb0.03O2 sensor to ethanol gas in the presence of different gases at 275 °C. The obtained results indicated that the (Gd, Mo) mixture could more effectively induce the photocatalytic properties of TiO2 while (Gd, Nb) dopants were the best for reinforcing its sensing characteristics.

State-of-the-Art Research on Chemiresistive Gas Sensors in Korea: Emphasis on the Achievements of the Research Labs of Professors Hyoun Woo Kim and Sang Sub Kim

This review presents the results of cutting-edge research on chemiresistive gas sensors in Korea with a focus on the research activities of the laboratories of Professors Sang Sub Kim and Hyoun Woo Kim. The advances in the synthesis techniques and various strategies to enhance the gas-sensing performances of metal-oxide-, sulfide-, and polymer-based nanomaterials are described. In particular, the gas-sensing characteristics of different types of sensors reported in recent years, including core-shell, self-heated, irradiated, flexible, Si-based, glass, and metal-organic framework sensors, have been reviewed. The most crucial achievements include the optimization of shell thickness in core-shell gas sensors, decrease in applied voltage in self-heated gas sensors to less than 5 V, optimization of irradiation dose to achieve the highest response to gases, and the design of selective and highly flexible gas sensors-based WS2 nanosheets. The underlying sensing mechanisms are discussed in detail. In summary, this review provides an overview of the chemiresistive gas-sensing research activities led by the corresponding authors of this manuscript.

Nanomolar Detection of H2S in an Aqueous Medium: Application in Endogenous and Exogenous Imaging of HeLa Cells and Zebrafish

The homeostasis of short-lived reactive species such as hydrogen sulfide/hypochlorous acid (H2S/HOCl) in biological systems is essential for maintaining intercellular balance. An unchecked increase in biological H2S concentrations impedes homeostasis. In this report, we present a molecular probe pyrene-based sulfonyl hydrazone derived from pyrene for the selective detection of H2S endogenously as well as exogenously through a "turn-off" response in water. The structure of the receptor is confirmed by Fourier-transform infrared spectroscopy, 1H and 13C nuclear magnetic resonance spectroscopy, electrospray ionization mass spectrometry, and single-crystal X-ray diffraction studies. The receptor shows excellent green emission in both the aqueous phase and solid state. Quenching of green emission of the receptor is observed only when H2S is present in water with a detection limit of 18 nM. Other competing anions and cations do not have any influence on the receptor's optical properties. The efficiency of H2S detection is not negatively impacted by other reactive sulfur species too. The sensing mechanism of H2S follows a chemodosimetric reductive elimination of sulfur dioxide, which is supported by product isolation. The receptor is found to be biocompatible, as evident by the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay, and its utility is extended to endogenous and exogenous fluorescence imaging of HeLa cells and zebrafish.