Controllable reduction of graphene oxide by electron-beam irradiation

Unexpected Self-Assembly of Nanographene Oxide Membranes upon Electron Beam Irradiation for Ultrafast Ion Sieving

Nanographene oxide (nGO) flakes-graphene oxide with a lateral size of ≈100 nm or less-hold great promise for superior flux and energy-efficient nanofiltration membranes for desalination and precise ionic sieving owing to their unique high-density water channels with less tortuousness. However, their potential usage is currently limited by several challenges, including the tricky self-assembly of nano-sized flakes on substrates with micron-sized pores, severe swelling in aqueous solutions, and mechanical instability. Herein, the successful fabrication of a robust membrane stacked with nGO flakes on a substrate with a pore size of 0.22 µm by vacuum filtration is reported. This membrane achieved an unprecedented water permeance above 819.1 LMH bar-1, with a high rejection rate of 99.7% for multivalent metal ions. The nGO flakes prepared using an electron beam irradiation method, have uniquely pure hydroxyl groups and abundant aromatic regions. The calculations revealed the strong hydrogen bonds between two nGO flakes, which arise from hydroxyl groups, coupled with hydrophobic aromatic regions, greatly enhance the stability of stacked flakes in aqueous solutions and increase their effective lateral size. The research presents a simple yet effective approach toward the fabrication of advanced 2D nanographene membranes with superior performance for ion sieving applications.

Controlled Radical Polymerization Initiated by Solvated Electrons

Solvated electron (esol - ) is highly reducing species and apt to initiate monomers via one-electron transfer reaction. Herein, utilizing the esol - solution of Na/hexamethylphosphoramide, radical and anionic initiations are observed respectively, which heavily depend on Na concentrations. Interestingly, this initiation system, in states of lower Na concentrations, higher molar conductivities and less paired esol - , give rise to a controlled radical polymerization (CRP) to yield polymers with predictable molecular weights and narrow molecular weight distributions (the lowest Ð = 1.25). This CRP presents unique behaviors, like solvent effect, electric field effect, and unusual copolymerization phenomenon. A semi-conjugated radical carrying a negative charge is proposed to be responsible for the CRP. This system gives a distinct way to regulate CRP from current CRPs, and offers new insights into the monomer initiation by esol - .

Metal-Organic Framework Membrane Hybridized with Graphitic Materials for Gas Separation

Metal-organic frameworks (MOFs) are an exceptional class of crystalline materials that have been extensively used to fabricate membranes for various applications such as gas separation, ion transport, and desalination due to their well-defined pore structure, chemical features, and simple synthesis process. The incorporation of graphitic carbon materials in MOFs has garnered significant attention as it can provide abundant nucleation sites and modulate gas transport by influencing the orientation or rigidity of MOF crystals without changing their porous structure. This review insights of previous studies utilizing graphene, graphene oxide, carbon nanotubes, and graphene nanoribbons for MOF-based gas separation membranes, particularly focusing on polycrystalline MOF membrane hybridization with graphitic materials. We also briefly discuss the use of carbon/MOF hybrid materials for preparing mixed matrix membranes.

Transformation of graphene oxide affects photodegradation of imidacloprid in the aquatic environment: Mechanism and implication

Graphene oxide (GO) is a representative novel carbonaceous nanomaterial, and neonicotinoid insecticides (NEOs) are currently the insecticides with the highest market share in the world. Their widespread application deservedly leads to their release to the environment. Thus, the complex interactions of these two types of organic compounds have attracted extensive attention. In this study, the effects of GO and its derivatives, reduced GO (RGO) and oxidized GO (OGO), on the photolysis of imidacloprid (IMD) (a typical NEO) under ultraviolet (UV) irradiation were systematically investigated. The results showed that the presence of the graphene-based nanomaterials (GNs) largely depressed the photodegradation of IMD, and the inhibition degree followed the order of RGO > GO > OGO. This was because the sp² π-conjugated structure in the GNs caused light-shielding effect and attenuated the direct photolysis of IMD, even though the GNs-generated reactive oxygen species (ROS) promoted the indirect photodegradation of IMD to a certain extent. Additionally, the rich O-functionalized GO and OGO altered the photolysis pathway of IMD and induced more toxic intermediate products. These results highlight the implication of carbonaceous nanomaterials on the behavior, fate and potential risk of NEOs in aqueous systems.

Unexpectedly efficient ion desorption of graphene-based materials

Ion desorption is extremely challenging for adsorbents with superior performance, and widely used conventional desorption methods involve high acid or base concentrations and large consumption of reagents. Here, we experimentally demonstrate the rapid and efficient desorption of ions on magnetite-graphene oxide (M-GO) by adding low amounts of Al³⁺. The corresponding concentration of Al³⁺ used is reduced by at least a factor 250 compared to conventional desorption method. The desorption rate reaches ~97.0% for the typical radioactive and bivalent ions Co²⁺, Mn²⁺, and Sr²⁺ within ~1 min. We achieve effective enrichment of radioactive ⁶⁰Co and reduce the volume of concentrated ⁶⁰Co solution by approximately 10 times compared to the initial solution. The M-GO can be recycled and reused easily without compromising its adsorption efficiency and magnetic performance, based on the unique hydration anionic species of Al³⁺ under alkaline conditions. Density functional theory calculations show that the interaction of graphene with Al³⁺ is stronger than with divalent ions, and that the adsorption probability of Al³⁺ is superior than that of Co²⁺, Mn²⁺, and Sr²⁺ ions. This suggests that the proposed method could be used to enrich a wider range of ions in the fields of energy, biology, environmental technology, and materials science.

Recent Advances on Tuning the Interlayer Coupling and Properties in van der Waals Heterostructures

2D van der Waals (vdW) heterostructures are receiving increasing research attention due to the theoretically amazing properties and unprecedented application potential. However, the as-synthesized heterostructures are generally underperforming due to the weak interlayer coupling, which inspires the researchers to find ways to modulate the interlayer coupling and properties, realizing the tailored performance for actual applications. There have been a lot of publications regarding the controllable regulation of the structures and properties of 2D vdW heterostructures in the past few years, while a review work summarizing the current advances is not yet available, though it is significant. This paper conducts a state-of-the-art review regarding the current research progress of performance modulation of vdW heterostructures by different techniques. First, the general synthesis methods of vdW heterostructures are summarized. Then, different performance modulation techniques, that is, mechanical-based, external fields-assisted, and particle beam irradiation-based methods, are discussed and compared in detail. Some of the newly proposed concepts are described. Thereafter, applications of vdW heterostructures with tailored properties are reviewed for the application prospects of the topic around this area. Moreover, the future research challenges and prospects are discussed, aiming at triggering more research interest and device applications around this topic.

Elucidating the roles of oxygen functional groups and defect density of electrochemically exfoliated GO on the kinetic parameters towards furazolidone detection

Using electrochemically exfoliated graphene oxide (GO)-modified screen-printed carbon electrodes for the detection of furazolidone (FZD), a nitrofuran antibiotic, was explored. In this study, we designed some GO samples possessing different oxygen functional group content/defect density by using ultrasonic irradiation or microwave techniques as supporting tools. The difference in physical characteristics of GO led to the remarkable change in kinetic parameters (electron transfer rate constant (k_s) and transfer coefficient (α)) of electron transfer reactions at K₃/K₄ probes as well as the FZD analyte. Obtained results reveal that the GO-ultrasonic sample showed the highest electrochemical response toward FZD detection owing to the increase in defect density and number of edges in the GO nanosheets under ultrasonic irradiation. The proposed electrochemical nanosensor enabled the monitoring of FZD in the linear range from 1 μM to 100 μM with an electrochemical sensitivity of 1.03 μA μM⁻¹ cm⁻². Tuning suitable electronic structures of GO suggests the potentiality of advanced GO-based electrochemical nanosensor development in food-producing animal safety monitoring applications.

In this study, we have investigated the role of changes in the microstructure of graphene oxide (GO) on the analytical kinetic parameters of GO-based electrochemical sensors for detection of furazolidone (FZD) antibiotic drug.

Reliable Fabrication of Graphene Nanostructure Based on e-Beam Irradiation of PMMA/Copper Composite Structure

Graphene nanostructures are widely perceived as a promising material for fundamental components; their high-performance electronic properties offer the potential for the construction of graphene nanoelectronics. Numerous researchers have paid attention to the fabrication of graphene nanostructures, based on both top-down and bottom-up approaches. However, there are still some unavoidable challenges, such as smooth edges, uniform films without folds, and accurate dimension and location control. In this work, a direct writing method was reported for the in-situ preparation of a high-resolution graphene nanostructure of controllable size (the minimum feature size is about 15 nm), which combines the advantages of e-beam lithography and copper-catalyzed growth. By using the Fourier infrared absorption test, we found that the hydrogen and oxygen elements were disappearing due to knock-on displacement and the radiolysis effect. The graphene crystal is also formed via diffusion and the local heating effect between the e-beam and copper substrate, based on the Raman spectra test. This simple process for the in-situ synthesis of graphene nanostructures has many promising potential applications, including offering a way to make nanoelectrodes, NEMS cantilever resonant structures, nanophotonic devices and so on.

Influences of Absorbed Dose Rate on the Mechanical Properties and Fiber-Matrix Interaction of High-Density Polyethylene-Based Carbon Fiber Reinforced Thermoplastic Irradiated by Electron-Beam

In this study, a high-density polyethylene (HDPE)-based carbon fiber-reinforced thermoplastic (CFRTP) was irradiated by an electron-beam. To assess the absorbed dose rate influence on its mechanical properties, the beam energy and absorbed dose were fixed, while the absorbed dose rates were varied. The tensile strength (TS) and Young's modulus (YM) were evaluated. The irradiated CFRTP TS increased at absorbed dose rates of up to 6.8 kGy/s and decreased at higher rates. YM showed no meaningful differences. For CFRTPs constituents, the carbon fiber (CF) TS gradually increased, while the HDPE TS decreased slightly as the absorbed dose rates increased. The OH intermolecular bond was strongly developed in irradiated CFRTP at low absorbed dose rates and gradually declined when increasing those rates. X-ray photoelectron spectroscopy analysis revealed that the oxygen content of irradiated CFRTPs decreased with increasing absorbed dose rate due to the shorter irradiation time at higher dose rates. In conclusion, from the TS viewpoint, opposite effects occurred when increasing the absorbed dose rate: a favorable increase in CF TS and adverse decline of attractive hydrogen bonding interactions between HDPE and CF for CFRTPs TS. Therefore, the irradiated CFRTP TS was maximized at an optimum absorbed dose rate of 6.8 kGy/s.

Ultrahigh water permeance of a reduced graphene oxide nanofiltration membrane for multivalent metal ion rejection

We develop a kind of pure rGO membrane using amino-hydrothermal reduction that exhibits an ultrahigh water permeance of 142.5 L m-2 h-1 bar-1 while still maintaining a high rejection rate of 91.6% for multivalent metal ions. The prepared rGO membranes have two types of spacing: larger hydrophilic spacing and smaller hydrophobic spacing, resulting in superior filtration performance. This provides a new avenue for multivalent metal ion separation using pure rGO membranes.

High-Resolution Three-Dimensional Sculpting of Two-Dimensional Graphene Oxide by E-Beam Direct Write

On-demand switchable "additive/subtractive" patterning of two-dimensional (2D) nanomaterials is an essential capability for developing new concepts of functional nanomaterials and their device realizations. Traditionally, this is performed via a multistep process using photoresist coating and patterning by conventional photo or electron beam lithography, which is followed by bulk dry/wet etching or deposition. This limits the range of functionalities and structural topologies that can be achieved as well as increases the complexity, cost, and possibility of contamination, which are significant barriers to device fabrication from highly sensitive 2D materials. Focused electron beam-induced processing (FEBIP) enables a material chemistry/site-specific, high-resolution multimode atomic scale processing and provides unprecedented opportunities for "direct-write", single-step surface patterning of 2D nanomaterials with an in situ imaging capability. It allows for realizing a rapid multiscale/multimode approach, ranging from an atomic scale manipulation (e.g., via targeted defect introduction as an active site) to a large-area surface modification on nano- and microscales, including patterned doping and material removal/deposition with 2D (in-plane)/three-dimensional (3D) (out-of-plane) control. In this work, we report on a new capability of FEBIP for nanoscale patterning of graphene oxide via removal of oxygenated carbon moieties with no use of reactive gas required for etching complemented by carbon atom deposition using a focused electron beam. The mechanism of experimentally observed phenomena is explored using the density functional theory (DFT) calculations, revealing that interactions of e-beam that liberated reactive oxygen radicals with carbon atoms on the graphene basal plane lead to the creation of atomic vacancies in the material. The reaction byproducts are volatile carbon dioxides, which are dissociated and volatilized from the graphene oxide surface functional groups by interactions with an energetic focused electron beam. Along with selective subtractive patterning of graphene oxide, the same electron beam with increased irradiation doses can deposit out-of-plane 3D carbon nanostructures on top of or around the 2D etched pattern, thus forming a hybrid 2D/3D nanocomposite with a feature control down to a few nanometers. This in operando dual nanofabrication capability of FEBIP is unmatched by any other nanopatterning techniques and opens a new design window for forming 2D/3D complex nanostructures and functional nanodevices.

Solvation-Involved Nanoionics: New Opportunities from 2D Nanomaterial Laminar Membranes

Nanoporous laminar membranes composed of multilayered 2D nanomaterials (2D-NLMs) are increasingly being exploited as a unique material platform for understanding solvated ion transport under nanoconfinement and exploring novel nanoionics-related applications, such as ion sieving, energy storage and harvesting, and in other new ionic devices. Here, the fundamentals of solvation-involved nanoionics in terms of ionic interactions and their effect on ionic transport behaviors are discussed. This is followed by a summary of key requirements for materials that are being used for solvation-involved nanoionics research, culminating in a demonstration of unique features of 2D-NLMs. Selected examples of using 2D-NLMs to address the key scientific problems related to nanoconfined ion transport and storage are then presented to demonstrate their enormous potential and capabilities for nanoionics research and applications. To conclude, a personal perspective on the challenges and opportunities in this emerging field is presented.