Assessment of the toxicity and biodegradation of amino acid-based ionic liquids

Tracing the Effect of Replacing [Gly]- with [Ala]- and Hydroxylation of [emim]+ on the Fine-Tuning of the Transport Properties of the Corresponding Amino Acid-Based Ionic Liquids Using MD Simulation

Natural amino acid-based ionic liquids (AAILs) composed of deprotonated amino acids, [AA]^-, as anions and hydroxylated imidazolium cations provide an eco-friendly nontoxic IL family with the growing number of chemical and biochemical revolutionary applications. In this paper, the transport properties of four AAILs composed of 1-(2-hydroxyethyl)-3-methylimidazolium ([HOemim]⁺) and 1-ethyl-3-methylimidazolium ([emim]⁺) cations with alaninate and glycinate anions were studied by molecular dynamics (MD) simulations. A nonpolarizable all-atom force field with the scaled charge (±0.8e) on each of the ions was applied and compared with the unit charge model in some cases. The tunable effects of the presence of the hydroxyl group in the side chain of the imidazolium cation, the type of amino acid anion, and the varied temperature on the dynamical behavior of AAILs were investigated in detail. The experimentally compatible trends of the simulated ionic self-diffusion coefficients, ionic conductivity, and ionicity were found to be inverse to the viscosity and ionic association of these ILs as [emim][Gly] > [emim][Ala] > [HOemim][Gly] > [HOemim][Ala]. The main reason behind these trends is the higher ability of the hydroxylated cation for the hydrogen-bond formation with [AA]^-. The mean square displacement (MSD), self-diffusion, and transference number of imidazolium cations are larger than those of [AA]^- anions, except in the case of [HOemim][Gly]. It was found that the activation energy for diffusion of [AA]^- is lower than that of [HOemim]⁺ but higher than that of [emim]⁺ in [HOemim][AA] and [emim][AA] ILs, respectively. The computed velocity autocorrelation function (VACF) showed that [Gly]^-, as the lightest ion, has the shortest mean collision time and velocity randomization time among the ions, especially in the [HOemim][Gly] IL. Replacing [emim]⁺ with [HOemim]⁺, similar to the effect of decreasing temperature, causes significant decreasing of the ionic self-diffusion and increasing of the well depth of the first minimum of the ionic VACFs. Current findings show that introducing suitable functional groups in the side chain of imidazolium cations can be a viable approach for efficient engineering design and fine-tuning of the transport properties of these AAILs.

Inventory of biodegradation data of ionic liquids

Ionic liquids (ILs) are increasingly of interest for environmentally open applications. Therefore, completely mineralising ILs are highly desirable. We reviewed the current state of knowledge on ILs' environmental biodegradability and identified research needs. Literature data were evaluated as for applied standard methods (e.g. OECD, ISO, APHA) for biodegradation of ILs in order to get an overview on the validity of the test results received and ILs' biodegradability. 109 studies were evaluated. The ILs were categorised based on the cation's core structure. The biodegradation data was classified according to a traffic light system (red: 0-19% degradation, amber: 20-59% degradation, green: ≥ 60% degradation). Not all studies could be assessed for compliance with the test guidelines due to missing test parameters. Moreover, no study discussed all validation criteria as defined by the test guidelines. Consequently, the reliability and quality of the existing biodegradation data is restrained. With regard to the different cations classified for ≥ 60% biodegradability, phosphonium ILs are the least biodegradable, followed by imidazolium ones. The most ILs that were biodegradable are cholinium ILs. The results indicate the need for more and qualitatively better testing according to standard methods including application and reporting of all validation criteria in order to get reliable data that enables the comparison of the test data and a comprehensive understanding of ILs' biodegradability. Moreover, reliable data allows the selection of sufficiently environmentally biodegradable ILs if an introduction into the environment during use cannot be excluded.

A Systematic Review of Amino Acid-Based Adsorbents for CO2 Capture

The rise of carbon dioxide (CO2) levels in the atmosphere emphasises the need for improving the current carbon capture and storage (CCS) technology. A conventional absorption method that utilises amine-based solvent is known to cause corrosion to process equipment. The solvent is easily degraded and has high energy requirement for regeneration. Amino acids are suitable candidates to replace traditional alkanolamines attributed to their identical amino functional group. In addition, amino acid salt is a green material due to its extremely low toxicity, low volatility, less corrosive, and high efficiency to capture CO2. Previous studies have shown promising results in CO2 capture using amino acids salts solutions and amino acid ionic liquids. Currently, amino acid solvents are also utilised to enhance the adsorption capacity of solid sorbents. This systematic review is the first to summarise the currently available amino acid-based adsorbents for CO2 capture using PRISMA method. Physical and chemical properties of the adsorbents that contribute to effective CO2 capture are thoroughly discussed. A total of four categories of amino acid-based adsorbents are evaluated for their CO2 adsorption capacities. The regeneration studies are briefly discussed and several limitations associated with amino acid-based adsorbents for CO2 capture are presented before the conclusion.

Choline-Amino Acid-Derived Bio-ionic Liquids for Solubility Enhancement of Zafirlukast

This study investigated the application of bio-ionic liquids (ILs) prepared from choline as cation and amino acid as anion for solubility enhancement of poorly water-soluble drug, Zafirlukast (ZFL). Herein, the solubility of ZFL in water and mixtures of water and ILs was assessed using UV spectroscopy at two temperature points 25°C and 37°C with increasing concentrations of IL. ZFL solubility was found to improve linearly with increasing concentration of [Ch][Pro] in water, representing 35- to 37-fold improvement in ZFL solubility at maximum concentration of [Ch][Pro] (1% w/v) compared to when only pure water was present. Also, the effect of IL on ZFL solubility was analyzed using NMR, DSC, and TGA. These results clearly suggest that ZFL solubility was increased by forming hydrogen bonds with selected [Ch][Pro] IL. Toxicity study of ILs was tested against gram-positive and gram-negative bacteria. Since IL solvent was found to increase the solubility of ZFL, this may serve as "functional excipient solvent" for solubility enhancement in its commercialized formulations.

Toxicity of oleate-based amino protic ionic liquids towards Escherichia coli, Danio rerio embryos and human skin cells

Protic ionic liquids (PILs) have been widely employed with the label of "green solvents'' in different sectors of technology and industry. The studied PILs are promising for corrosion inhibition and lubrication applications in industry. Industrial use of the PILs can transform them in wastes, due to accidental spill or drag in water due to washing, that can reach water bodies. In addition, the handling of the product by the workers can expose them to accidental contact. Thus, the aim of this work is to evaluate the toxicity of PILs 2-hydroxyethylammonium oleate (2-HEAOl), N-methyl-2-hydroxyethylammonium oleate (m-2HEAOl) and bis-2-hydroxyethylammonium oleate (BHEAOl) towards Escherichia coli, zebrafish embryos, model organisms that can be present in water, and human skin cells. This is the first work reporting toxicity results for these PILs, which constitutes its novelty. Results showed that the studied PILs did not inhibit E. coli bacterial growth but could cause human skin cells death at the concentrations of use. LC₅₀ values for zebrafish eggs were 40.21 mg/L for 2HEAOl, 12.92 mg/L for BHEAOl and 32.74 mg/L for m-2HEAOl, with sublethal effects at lower concentrations, such as hatching retarding, low heart rate and absence of free swimming.

Synthesis of Purine-Based Ionic Liquids and Their Applications

Bio-based ionic liquids (ILs) are being increasingly sought after, as they are more sustainable and eco-friendly. Purines are the most widely distributed, naturally occurring N-heterocycles, but their low water-solubility limits their application. In this work, four purines (theobromine, theophylline, xanthine, and uric acid) were combined with the cation tetrabutylammonium to synthesize bio-based ILs. The physico-chemical properties of the purine-based ILs were characterized, including their melting and decomposition temperatures and water-solubility. The ecotoxicity against the microalgae Raphidocelis subcapitata was also determined. The ILs show good thermal stability (>457 K) and an aqueous solubility enhancement ranging from 53- to 870-fold, in comparison to their respective purine percursors, unlocking new prospects for their application where aqueous solutions are demanded. The ecotoxicity of these ILs seems to be dominated by the cation, and it is similar to chloride-based IL, emphasizing that the use of natural anions does not necessarily translate to more benign ILs. The application of the novel ILs in the formation of aqueous biphasic systems (ABS), and as solubility enhancers, was also evaluated. The ILs were able to form ABS with sodium sulfate and tripotassium citrate salts. The development of thermoresponsive ABS, using sodium sulfate as a salting-out agent, was accomplished, with the ILs having different thermosensitivities. In addition, the purine-based ILs acted as solubility enhancers of ferulic acid in aqueous solution.

Review of the toxic effects of ionic liquids

Interest in ionic liquids (ILs), called green or designer solvents, has been increasing because of their excellent properties such as thermal stability and low vapor pressure; thus, they can replace harmful organic chemicals and help several industrial fields e.g., energy-storage materials production and biomaterial pretreatment. However, the claim that ILs are green solvents should be carefully considered from an environmental perspective. ILs, given their minimal vapor pressure, may not directly cause atmospheric pollution. However, they have the potential to cause adverse effects if leaked into the environment, for instance if they are spilled due to human mistakes or technical errors. To estimate the risks of ILs, numerous ILs have had their toxicity assessed toward several micro- and macro-organisms over the past few decades. Since the toxic effects of ILs depend on the method of estimating toxicity, it is necessary to briefly summarize and comprehensively discuss the biological effects of ILs according to their structure and toxicity testing levels. This can help simplify our understanding of the toxicity of ILs. Therefore, in this review, we discuss the key findings of toxicological information of ILs, collect some toxicity data of ILs to different species, and explain the influence of IL structure on their toxic properties. In the discussion, we estimated two different sensitivity values of toxicity testing levels depending on the experiment condition, which are theoretical magnitudes of the inherent sensitivity of toxicity testing levels in various conditions and their changes in biological response according to the change in IL structure. Finally, some perspectives, future research directions, and limitations to toxicological research of ILs, presented so far, are discussed.

Development of an automated yeast-based spectrophotometric method for toxicity screening: Application to ionic liquids, GUMBOS, and deep eutectic solvents

Saccharomyces cerevisiae has been used as a eukaryotic model organism for studying the toxic effects of various compounds. In this context, an automated spectrophotometric method based on the enzymatic reduction of methylene blue dye to a colorless product by living yeast cells was implemented in a sequential injection analysis system. Loss of yeast viability/impaired metabolic activity was monitored by an increase in optical density at 664 nm. To prove the usefulness of this approach, the toxicity of ILs (ionic liquids), GUMBOS (group of uniform materials based on organic salts), and DESs (deep eutectic solvents) was examined. Differences obtained between IC₅₀ values confirmed the impact of structural elements on each compounds' toxicity. While DESs appeared to be less toxic than ILs, GUMBOS were found to be among the most toxic compounds to yeast cells and thus can be viewed as promising antimicrobial candidates. The automated methodology showed satisfactory repeatability and reproducibility (RSD < 9%), which is in good agreement with Green Chemistry principles. In fact, the method required consumption of only 40 μL of reagents and produced less than 2 mL of effluents per cycle. Thus, the developed assay can be used as an alternative tool for toxicity screening.

Ester Oils Prepared from Fully Renewable Resources and Their Lubricant Base Oil Properties

The work reports on the physicochemical and tribological properties of gallate ester oils prepared from fully renewable resources, such as gallic acid and fatty acids. The ester structures were identified by proton nuclear magnetic resonance spectroscopy (1H NMR), carbon nuclear magnetic resonance spectroscopy (13C NMR) and high-resolution mass spectra (HRMS) data. The density at 20 °C (d 20), kinematic viscosity (KV), viscosity index (VI), pour point (PP), flash point (FP), thermal and oxidative stabilities, friction-reducing and antiwear properties of gallate ester oils were evaluated. The tribological properties of gallate ester oils as lubricants for steel, copper, and aluminum tribo-pairs can be compared with those of the commercially available lubricating oil tris(2-ethylhexyl) trimellitate (Phe-3Ci8), but their viscosity-temperature characteristics, thermal and oxidative stabilities are better than those of Phe-3Ci8. More importantly, they have much higher biodegradabilities than Phe-3Ci8. The study of the lubrication mechanism shows that the physical and/or chemical adsorption film formed by gallate ester molecules between friction pairs is the key factor for them to obtain friction-reducing and antiwear properties.

Upgrading the Topical Delivery of Poorly Soluble Drugs Using Ionic Liquids as a Versatile Tool

Numerous studies are continuously being carried out in pursuit of formulations with higher performance. Problems such as poor drug solubility, which hinders drug incorporation into delivery systems and bioavailability, or limitations concerning the stability and performance of the formulations may cause difficulties, since solving all these drawbacks at once is a huge challenge. Ionic liquids (ILs), due to their tunable nature, may hypothetically be synthesized for a particular application. Therefore, predicting the impact of a particular combination of ions within an IL in drug delivery could be a useful strategy. Eight ILs, two choline amino acid ILs, two imidazole halogenated ILs, and four imidazole amino acid ILs, were prepared. Their applicability at non-toxic concentrations, for improving solubility and the incorporation of the poorly soluble, ferulic, caffeic, and p-coumaric acids, as well as rutin, into topical emulsions, was assessed. Next, the impact of the ILs on the performance of the formulations was investigated. Our study showed that choosing the appropriate IL leads to a clear upgrade of a topical emulsion, by optimizing multiple features of its performance, such as improving the delivery of poorly soluble drugs, altering the viscosity, which may lead to better sensorial features, and increasing the stability over time.

K, Rayadurgam J, Rajasekhara Reddy S. Naturally derived sugar-based ionic liquids: an emerging tool for sustainable organic synthesis and chiral recognition

In the past decade, the synthesis of sugar-based ionic liquids (SILs) from natural sugars has been described as a promising strategy.

Molecular Dynamics Evaluation of the Effect of Cholinium Phenylalaninate Biocompatible Ionic Liquid on Biomimetic Membranes

Toward the search of sustainable green solvents, choline amino acid ([Ch][AA]) ionic liquids (ILs), mainly derived from renewable feedstocks, have emerged as a promising atoxic alternative to the conventional solvents. Recent studies have shown the remarkably benign nature of cholinium-based ILs against biomimetic phospholipid membranes. However, few of the contemporaneous experimental studies have contradicted the aforesaid ecofriendly nature of these ILs with anions comprising longer alkyl or aromatic tails. Aiming to understand the influence of amino acid side-chain variation in a particular bio-IL on biomembranes, herein, we have evaluated the effect of cholinium phenylalaninate ([Ch][Phe]) IL on the structural stability of homogeneous biomimetic 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) and 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoethanolamine (POPE) lipid bilayers using atomistic molecular dynamics simulations. Although we observe spontaneous intercalation of aromatic rings of [Phe]^- anions in the hydrophobic region of the bilayers, the polar backbone of the anion remains coordinated with the lipid polar part through strong electrostatic and H-bonding interactions. Besides, the [Ch]⁺ cations get accumulated at the lipid-water interface to counter the excess negative charge density. The intercalation of the anionic rings causes significant perturbations in the lipid structural arrangement while still maintaining the bilayer integrity. The quantitative evaluation to probe the deteriorating effect of this bio-IL application establishes anions as the principal component causing the observed structural perturbations. The analysis of the structural properties along with the free energy assessment reveals the higher efficacy of [Ch][Phe] bio-IL to perturb the POPE bilayer structure than the POPC bilayer.

Insights into the Properties and Potential Applications of Renewable Carbohydrate-Based Ionic Liquids: A Review

Carbohydrate-derived ionic liquids have been explored as bio-alternatives to conventional ionic liquids for over a decade. Since their discovery, significant progress has been made regarding synthetic methods, understanding their environmental effect, and developing perspectives on their potential applications. This review discusses the relationships between the structural properties of carbohydrate ionic liquids and their thermal, toxicological, and biodegradability characteristics in terms of guiding future designs of sugar-rich systems for targeted applications. The synthetic strategies related to carbohydrate-based ionic liquids, the most recent relevant advances, and several perspectives for possible applications spanning catalysis, biomedicine, ecology, biomass, and energy conversion are presented herein.

How does cholinium cation surpass tetraethylammonium cation in amino acid-based ionic liquids for thermal and structural stability of serum albumins?

In this study, we report how similarly two serum albumins (bovine serum albumin (BSA) and human serum albumin (HSA)) respond in the presence of different concentration of aromatic amino acid based ionic liquids (AAILs), which are cholinium tryptophan [CHO][Trp]IL and tetraethylammonium tryptophan [TEA][Trp]IL. Extended results of thermodynamic stability indicate the extent to which both serum albumins differ in their thermal stability despite having structural similarity in presence of AAILs. To efficiently quantify the results, biomolecular interactions studies were carried out between serum albumins and AAILs with the help of differential scanning calorimetry (DSC), dynamic light scattering (DLS) and various spectroscopic techniques. DSC results illustrated that both AAILs are increasing the thermal stability of BSA and HSA, as per transition temperature (T_m) values, BSA (65.51 to 72.46 °C) and HSA (65.46 to 75.97 °C) have more thermal stability in the presence of [CHO][Trp]IL as compare to [TEA][Trp]IL, BSA (65.51 to 69.75 °C) and HSA (65.46 to 72.08 °C). Secondary structure results obtained using Dichroweb software and selcon calculations. Furthermore, to illustrate the specific binding of AAIL's cations or anions with the binding sites of BSA and HSA, the molecular docking studies were also performed using Molegro trail version v 6.0.

The effects of 1-hexyl-3-methylimidazolium bromide on embryonic development and reproduction in Daphnia magna

Ionic liquids (ILs) are acknowledged as green chemicals and favorable substitutes for volatile organic solvents, which are currently used. However, previous studies have shown that these compounds had toxicological impacts on aquatic organisms. To investigate the effects of 1-hexyl-3- methylimidazolium bromide ionic liquid ([C₆mim]Br) on embryonic development and reproduction in water flea (Daphnia magna), a series of exposure experiments were conducted, including acute toxicity, maternal exposure, and chronic exposure tests. In acute toxicity experiment, D. magna neonates exhibited developmental abnormalities in the shell spine and the second antennae in a concentration-dependent manner after exposure to [C₆mim]Br. The results in maternal exposure test also revealed a certain embryo-toxicity in response to [C₆mim]Br in D. magna. However, the toxicity was lower than that conveyed by direct acute exposure, this indicated that the IL could act directly on organism. During the 21 days chronic exposure, the 1.6 mg/L exposure caused marked drop in the survival, molts and the number of the first brood of D. magna. Meanwhile, the total number of offspring was significantly declined in 1.6 mg/L concentration treatment groups, whereas increased in 0.2 mg/L groups. Generally, abnormalities in the offspring were significantly increased across all of the treatment groups in contrast to the control. No effect on sex differentiation was found during the experiments. These findings suggested that [C₆mim]Br could affect embryonic development and reproduction in D. magna, and provided references for further study on the mechanisms underlying toxicological effects of ILs and the assessment of their potential environmental risks.

An Overview on the Toxicological Properties of Ionic Liquids toward Microorganisms

Ionic liquids (ILs), a class of materials with unique physicochemical properties, have been used extensively in the fields of chemical engineering, biotechnology, material sciences, pharmaceutics, and many others. Because ILs are very polar by nature, they can migrate into the environment with the possibility of inclusion in the food chain and bioaccumulation in living organisms. However, the chemical natures of ILs are not quintessentially biocompatible. Therefore, the practical uses of ILs must be preceded by suitable toxicological assessments. Among different methods, the use of microorganisms to evaluate IL toxicity provides many advantages including short generation time, rapid growth, and environmental and industrial relevance. This article reviews the recent research progress on the toxicological properties of ILs toward microorganisms and highlights the computational prediction of various toxicity models.

Evaluation of CO2-induced azole-based switchable ionic liquid with hydrophobic/hydrophilic reversible transition as single solvent system for coupling lipid extraction and separation from wet microalgae

The utilization of microalgae as bioenergy source was limited by the excessive cost and energy consumption during the process of lipid extraction and separation. CO₂-induced switchable ionic liquids (S-ILs) with reversible hydrophobic-hydrophilic conversion were synthesized and applied for lipid extraction and separation. The reversible transition mechanism of switchable IL is due to the formation of carbamate. The novel approach based on S-ILs was developed for lipid extraction from wet microalgae, which coupled microalgae cell disruption, lipid extraction, separation, and solvent recovery process without additional solvents. The highest lipid extraction efficiencies from wet microalgae were obtained by C₆DIPA-Im, and the lipids were recovered from the extraction phase by simply bubbling CO₂. Furthermore, C₆DIPA-Im maintained more than 83.6 ± 3.6% of its initial lipid extraction efficiency after recycling five times. The S-IL based extraction and separation method provides a new strategy for sustainable bioenergy production.