A green sorbent for CO2 capture: α-cyclodextrin-based carbonate in DMSO solution

Proton-Responsive Ligands Promote CO2 Capture and Accelerate Catalytic CO2/HCO2- Interconversion

The synthesis and investigation of [Rh(DHMPE)2][BF4] (1) are reported. 1 features proton-responsive 1,2-bis[(dihydroxymethyl)phosphino]ethane (DHMPE) ligands, which readily capture CO2 from atmospheric sources upon deprotonation. The protonation state of the DHMPE ligand was observed to have a significant impact on the catalytic reactivity of 1 with CO2. Deprotonation and CO2 binding to 1 result in a ∼10-fold rate enhancement in catalytic degenerate CO2 reduction with formate, monitored by 12C/13C isotope exchange between H12CO2- and 13CO2. Studies performed using a similar complex lacking the hydroxyl ligand functionality ([Rh(DEPE)2][BF4] where DEPE = 1,2-bis(diethylphosphino)ethane) do not show the same rate enhancements when base is added. Based upon the cation-dependent activity of the catalyst, Eyring analysis, and cation sequestration experiments, CO2 binding to 1 is proposed to facilitate preorganization of formate/CO2 in the transition state via ligand-based encapsulation of Na+ or K+ cations to lower the activation energy and increase the observed catalytic rate. Incorporation of proton-responsive DHMPE ligands provides a unique approach to accelerate the kinetics of catalytic CO2 reduction to formate.

CO2 complexation with cyclodextrins

Carbon dioxide (CO2) emissions from industrial processes, power generation, and transportation contribute significantly to global warming and climate change. Carbon capture and storage (CCS) technologies are essential to reduce these emissions and mitigate the effects of climate change. Cyclodextrins (CDs), cyclic oligosaccharides, are studied as potential CO2 capture agents due to their unique molecular structures and high selectivity towards CO2. In this paper we have investigated binding efficiency of a number of cyclodextrins towards CO2. It is found that the crystal structure of α-cyclodextrin with CO2 has a 1:1 stoichioimetry and that a number of simple and modified cyclodextrins bind CO2 in water with a Kg of 0.18-1.2 bar-1 (7-35 M-1) with per-O-methyl α-cyclodextrin having the highest CO2 affinity.

CS2/CO2 Utilization Using Mukaiyama Reagent as a (Thio)carbonylating Promoter: A Proof-of-Concept Study

We report on the reaction of ethylene-terminated heteroatoms (C₂X; X = N, O, and S) with CS₂/CO₂ using Mukaiyama reagent (2-chloro-1-methylpyridinium iodide, CMPI) as a promoter for the preparation of imidazolidin-2-one, oxazolidin-2-one, 1,3-dioxolan-2-one, 1,3-dithiolan-2-one, and their thione counterparts at ambient temperature and pressure. Spectroscopic measurements, viz., ¹H/¹³C nuclear magnetic resonance (NMR) and ex situ attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy methods verified the reaction of CS₂/CO₂ with the ethylene-based substrates and subsequently the formation of cyclic products. The experimental data indicated the formation of the enol-form of imidazolidin-2-one and oxazolidin-2-one, while the keto-form was obtained for their thione correspondents. Furthermore, density functional theory calculations revealed the stability of the keto- over the enol-form for all reactions and pointed out the solvent effect in stabilizing the latter.

Current Status of Quantum Chemical Studies of Cyclodextrin Host-Guest Complexes

This article aims to review the application of various quantum chemical methods (semi-empirical, density functional theory (DFT), second order Møller-Plesset perturbation theory (MP2)) in the studies of cyclodextrin host-guest complexes. The details of applied approaches such as functionals, basis sets, dispersion corrections or solvent treatment methods are analyzed, pointing to the best possible options for such theoretical studies. Apart from reviewing the ways that the computations are usually performed, the reasons for such studies are presented and discussed. The successful applications of theoretical calculations are not limited to the determination of stable conformations but also include the prediction of thermodynamic properties as well as UV-Vis, IR, and NMR spectra. It has been shown that quantum chemical calculations, when applied to the studies of CD complexes, can provide results unobtainable by any other methods, both experimental and computational.

Mechanistic insights on CO2 utilization using sustainable catalysis

Caffeinium halides were used to catalyse the cycloaddition of CO2 to form cyclic carbonates. The reaction intermediates were isolated and characterized experimentally. The reaction mechanism has been confirmed by DFT calculations.

Activation of β-diketones for CO2 capture and utilization

β-Diketones are used for CO2 sequestration and utilization which was made possible due to their dual Brønsted acid/Lewis base character upon activation using a superbase,1,8-diazabicyclo[5.4.0]undec-7-ene or zinc bromide, respectively.

Cross-linked, porous imidazolium-based poly(ionic liquid)s for CO2 capture and utilisation

A series of micro/meso porous imidazolium poly(ionic liquid)s for CO2 capture and utilization is reported. They show moderate sorption capacity under RTP conditions, and good catalytic activity towards the cycloaddition of CO2 and epoxides to synthesize cyclic carbonates.

CO2 coupling with epoxides catalysed by using one-pot synthesised, in situ activated zinc ascorbate under ambient conditions

An in situ generated zinc ascorbate pre-catalyst for cyclic carbonate (CC) synthesis via CO₂ coupling with epoxides under ambient conditions was reported. Spectroscopic measurements indicated that CO₂ was inserted into the zinc ascorbate complex through the formation of an activated zinc carbonate catalyst upon abstracting the enediol protons with sodium hydride. The aliphatic diols were not activated under the applied conditions and did not interfere with either the process of cycloaddition or CO₂ activation. The catalyst was active against different terminal epoxides, with a conversion of 75 and 85%, when propylene oxide and styrene oxide were used at 20 and 50 °C, respectively under 1 atm CO₂ for 17 h, which was considered a good advancement for heterogeneous based catalysis. Moreover, green chemistry principles were applied to ultimately end up with more ecofriendly approaches for the synthesis of CC following a simple balloon technique. Herein, we used zinc as a sustainable metal, together with ascorbic acid as a bio-renewable material in addition to CO₂ as a renewable feed-stock. Furthermore, waste prevention was achieved using the reaction side product, viz., NaBr as a co-catalyst.

The eternal battle to combat global warming: (thio)urea as a CO2 wet scrubbing agent

(Thio)Urea scaffolds are best known for their importance as intermediates in organic synthesis. In this work, a mechanistic study of the reaction between urea (U), (2-hydroxyethyl)urea (U-EtOH) and thiourea (tU)/NaH in DMSO with CO2 was carried out. While both U/tU reacted with CO2via a 1 : 2 mechanism through the formation of the keto (thio)carbamide-carboxylate adducts (k-U/tU-CO2- Na+), U-EtOH gave mixed CO2-adducts composed of organic carbonate and carbamide-carboxylate moieties (Na+-CO2-U-Et-OCO2- Na+). Moreover, we recorded for the first time, a new type of bond, namely sodium carbamimidothiocarbonate (e-tU-SCO2- Na+), upon bubbling CO2 in the DMSO solution of tU due to the persistence of the enol form (e-tU) and the better nucleophilicity of sulfur over nitrogen focal points. The reaction mechanisms were proven by 1D and 2D nuclear magnetic resonance (NMR) and ex situ attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopies. The stability of these bonds was studied following the changes in 1H-NMR as a function of temperature, which indicated the reversibility of these reactions. Furthermore, the proposed mechanisms were explored theoretically via density functional theory (DFT) calculations by analyzing the energetics of the anticipated products.

CO2 activation through C–N, C–O and C–C bond formation

CO₂ fixation reactions have been explored using different organic substrates upon activation with a superbase.

Biomaterials for CO2 Harvesting: From Regulatory Functions to Wet Scrubbing Applications

A new series of 2-aminoethyl-benzene-based biomaterials, namely, dopamine (DOP), tyramine (TYR), phenylethylamine (PEA), and epinephrine (EPN), dissolved in dimethylsulfoxide (DMSO) have been investigated for CO2 capture upon activatiing their hydhydrochloride salts  with a NaOH pellet. Spectroscopic measurements, including ex situ ATR-FTIR, 1D and 2D NMR experiments have been applied to verify the formation of the sodium carbamate adducts (RR'N-CO2 - Na+). The emergence of new peaks in the IR spectra ranging between 1702 and 1735 cm-1 together with the chemical shift within 157-158 ppm in the 13C NMR, as well as with cross-peaks obtained by 1H-15N HSQC measurements at ca. 84 and 6.6 ppm verified the formation of RR'N-CO2 - Na+ products upon the chemical fixation of CO2. The CO2 sorption capacity of the examined biomaterials was evaluated volumetrically, with a maximum value of 8.18 mmol CO2·g-1 sorbent (36.0 (w/w)%, including both chemisorption and physisorption), for 5 (w/v)% solutions measured at 5 bar CO2 and 25 °C, for TYR and PEA. DFT calculations indicated that the intramolecular hydrogen bonding within the structural motif of EPN-N-CO2 - Na+ adduct provides an exceptional stability compared to monoethanolamine and other structurally related model compounds.

A catecholamine neurotransmitter: epinephrine as a CO2 wet scrubbing agent

Bio-renewables are emerging as potential materials for CO2 sorption. Epinephrine is employed as a green scrubbing agent for CO2 capturing through the formation of a metal carbamate as proved by 1H, 13C and 1H-15N NMR and ex situ ATR-FTIR spectroscopy, as well as supported by quantum-chemical calculations.