Comparison of performance and biofouling resistance of thin-film composite forward osmosis membranes with substrate/active layer modified by graphene oxide

Forward Osmosis Membrane: Review of Fabrication, Modification, Challenges and Potential

Forward osmosis (FO) is a low-energy treatment process driven by osmosis to induce the separation of water from dissolved solutes/foulants through the membrane in hydraulic pressure absence while retaining all of these materials on the other side. All these advantages make it an alternative process to reduce the disadvantages of traditional desalination processes. However, several critical fundamentals still require more attention for understanding them, most notably the synthesis of novel membranes that offer a support layer with high flux and an active layer with high water permeability and solute rejection from both solutions at the same time, and a novel draw solution which provides low solute flux, high water flux, and easy regeneration. This work reviews the fundamentals controlling the FO process performance such as the role of the active layer and substrate and advances in the modification of FO membranes utilizing nanomaterials. Then, other aspects that affect the performance of FO are further summarized, including types of draw solutions and the role of operating conditions. Finally, challenges associated with the FO process, such as concentration polarization (CP), membrane fouling, and reverse solute diffusion (RSD) were analyzed by defining their causes and how to mitigate them. Moreover, factors affecting the energy consumption of the FO system were discussed and compared with reverse osmosis (RO). This review will provide in-depth details about FO technology, the issues it faces, and potential solutions to those issues to help the scientific researcher facilitate a full understanding of FO technology.

Contribution of filtration and photocatalysis to DOM removal and fouling mechanism during in-situ UV-LED photocatalytic ceramic membrane process

The use of ceramic membranes and ultraviolet light-emitting diodes (UV-LEDs) has advanced the application of photocatalytic membrane for water treatment. We systematically evaluated the contribution of filtration and photocatalysis to dissolved organic matter (DOM) removal and fouling mechanism during in-situ UV-LED photocatalytic ceramic membrane filtration. The results showed that physical rejection primarily led to removal of 4-15 kDa molecules and photocatalysis further increased the removal of 1-4 kDa molecules, causing small sized microbial humic-like or protein-like materials in the permeate. In-situ UV-LED photocatalysis had an excellent effect on membrane fouling mitigation regardless of DOM sources. The dominant fouling mechanism changed from partial blockage to gel layer formation with increasing Ca²⁺ concentration but did not change with UV treatment. Correlation analysis revealed that the removal of 1-4 kDa molecules contributed to the mitigation of both reversible and irreversible fouling resistance, and the small molecules were the major cause of irreversible fouling resistance. Removal of 1-4 kDa terrestrial humic acid-like contributed to the pore blockage mechanism for synthetic water. Removal of 4-15 kDa protein-like materials was closely correlated to the pore blockage mechanism for real water. Trihalomethanes (THMs) and haloacetic acids (HAAs) formation potential (FP) were both significantly reduced after photocatalytic ceramic membrane process, but precursors of nitrogenous disinfection by-products (N-DBPs) with high toxicity were not removed by filtration or by photocatalysis, which deserves attention. Membrane rejection made higher contribution to better DBPFP control than photocatalysis. This study provides novel insights into the impact of UV-LED on DOM removal, DBPFP control and fouling mitigation, promoting the development of photocatalytic ceramic membrane filtration.

Modification of Thin Film Composite Pressure Retarded Osmosis Membrane by Polyethylene Glycol with Different Molecular Weights

An investigation of the effect of the molecular weight of polyethylene glycol (PEG) on thin-film composite (TFC) flat sheet polysulfone membrane performance was conducted systematically, for application in forward osmosis (FO) and pressure retarded osmosis (PRO). The TFC flat sheet PSf-modified membranes were prepared via a non-solvent phase-separation technique by introducing PEGs of different molecular weights into the dope solution. The TFC flat sheet PSf-PEG membranes were characterized by SEM, FTIR and AFM. The PSf membrane modified with PEG 600 was found to have the optimum composition. Under FO mode, this modified membrane had a water permeability of 12.30 Lm⁻²h⁻¹ and a power density of 2.22 Wm⁻², under a pressure of 8 bar in PRO mode, using 1 M NaCl and deionized water as the draw and feed solutions, respectively. The high water permeability and good mechanical stability of the modified TFC flat sheet PSF-PEG membrane in this study suggests that this membrane has great potential in future osmotically powered generation systems.

Biofouling detection methods that are widely applicable and useful across disciplines: a mini-review

Biofouling, or the build-up of microorganisms in a biofilm at the solid-water or water-air interface, is an interdisciplinary problem. Biofouling causes various issues including clogging systems, contaminating devices, and creating infections that are extremely difficult to treat, to name but a few. Therefore, engineers, pharmacologists, microbiologists, wastewater treatment operators, chemists, food preservative formulators, home and personal care product formulators, and toxicologists all play a role in studying and have an interest in solving biofouling. High-throughput studies on biofilm prevention and removal can take the form of biofilm antimicrobial microdilution susceptibility (BAMS) tests. Due to vested interests of many disciplines, the results from these tests should be applicable and useful to each discipline. This critical review analyses the focuses, biological implications, and metrics required by each discipline. The possible detection methods that could satisfy each desired metric are then summarized. The detection methods were analysed in order to recommend two methods of biofilm detection, Crystal Violet stain and the LIVE/DEAD BacLight stain, which correspond with three metrics including total biomass, log reduction, and the MIC, BPC, MBIC, MBC, BBC, and/or MBEC values. Determining these three metrics for each BAMS test will allow this type of research to be widely applicable and useful across many disciplines.

Combined effects of Pseudomonas quinolone signal-based quorum quenching and graphene oxide on the mitigation of biofouling and improvement of the application potential for the thin-film composite membrane

Biofouling caused by the growth of the biofilm is the main bottleneck that limits the effective operation of thin-film composite (TFC) membrane in the forward osmosis (FO) process. This study investigated the combined effects of graphene oxide (GO) immobilized thin-film nanocomposite (TFN-S) membrane and Pseudomonas quinolone signal (PQS)-based quorum quenching on biofouling mitigation, especially under the operation of pressure-retarded osmosis (PRO) mode, and the influence of methyl anthranilate (MA) inhibitor on the composition and structure of biofilm was also evaluated. Synthetic wastewater was used as the feed solution, in which the model strain Pseudomonas aeruginosa was added to simulate biofouling. The results showed that GO modification and MA addition both efficiently mitigated flux decline and EPS secretion, but the interference of PQS pathway on biofouling control was better than GO embedding. TFN-S membrane with MA addition exhibited superior anti-biofouling performance based on the combined effects of GO and MA. The alleviated concentration polarization and enhanced hydrophilicity of the TFN-S membrane reduced the flux decline in the early stage. Additionally, the antibacterial property of GO inhibited the viability of the attached bacteria (under PRO mode) and MA further mitigated the EPS secretion and biofilm development in the later stage. In the presence of PQS inhibitor MA, live/total cells ratio was 15% and 13% higher than that of TFC membrane in FO and PRO modes, respectively. Furthermore, exogenous addition of MA led to a relatively loose biofilm structure, resulting in high membrane permeability in the biofouling formation process.

Advantages, limitations, and future suggestions in studying graphene-based desalination membranes

The potential of novel 2D carbon materials such as nanoporous single-layer graphene and multilayer graphene oxide membranes is based on their possible advantages such as high water permeability, high selectivity capable of rejecting monovalent ions, with high salt rejection, reduced fouling, and high chemical and physical stability. Here we review how the field has advanced in the study of their performances in various desalination approaches such as reverse osmosis, forward osmosis, nanofiltration, membrane distillation, and solar water purification. The research on making high-performance graphene membranes which started with reverse osmosis applications is seemingly evolving towards other directions.