Re-evaluation of experimental measurements for the validation of electronic band structure calculations for LiFePO4 and FePO4

How lithium-ion batteries work conceptually: thermodynamics of Li bonding in idealized electrodes

A good explanation of lithium-ion batteries (LIBs) needs to convincingly account for the spontaneous, energy-releasing movement of lithium ions and electrons out of the negative and into the positive electrode, the defining characteristic of working LIBs. We analyze a discharging battery with a two-phase LiFePO4/FePO4 positive electrode (cathode) from a thermodynamic perspective and show that, compared to loosely-bound lithium in the negative electrode (anode), lithium in the ionic positive electrode is more strongly bonded, moves there in an energetically downhill irreversible process, and ends up trapped in the positive electrode. Only a sufficiently high charging voltage can drive it back to the other electrode. Since the stronger bonding in the positive electrode lowers the energy by ∼320 kJ mol-1, a lot of energy is released. This explanation is quantitatively supported by an analysis of cohesive-energy differences of the electrode materials. Since electrons are only intermediates in the discharge reaction and the chemical potential of the electron cannot be measured, electrons do not need to be assigned a distinct energetic role. The incorporation of Li+ and an electron into the cathode is accompanied by the reduction of another ion or atom, usually a transition metal such as Fe or Co. The metal's ionization energy in the corresponding oxidation step correlates with the cell voltage, based on a decomposition of cohesive energy into electronic and ionic components. We relate the differences in cohesive energies to the chemical potential of lithium atoms, which is quantified, for instance for a two-phase electrode. The analysis is extended to a single-phase LixCoO2 cathode, whose average voltage can be calculated from the cohesive-energy difference between LiCoO2 and CoO2.

Effect of Mn, N co-doped LiFePO4 on electrochemical and mechanical properties: A DFT study

In this study, the thermodynamic stability, embedding voltage, volume change rate, electronic structure properties, mechanical properties and lithium-ion diffusion characteristics of the Mn, N co-doped LiFePO4 material are investigated using a first-principles approach based on density generalization theory. The results show that the doped system has a low formation energy and the material meets the thermodynamic stability criteria. During the de-lithium process, the volume change rate of the doped material decreases and the cycling performance is improved, but the battery energy density decreases slightly. It is also found that the doping of N led to the transformation of the material from a p-type semiconductor to an N-type semiconductor, while the doping of Mn and N lead to the creation of impurity bands, narrowing of the band gap and an increase in conductivity. At the same time, Mn, N co-doping greatly improve the ductility of the material, suppress the generation of microcracks, and reduce the possibility of shear deformation. In addition, it is noteworthy that the lithium-ion diffusion energy barrier of the doped system is reduced, which predicts an increase in the diffusion rate of lithium ions in the doped system.

Novel Synthesis of 3D Mesoporous FePO4 from Electroflocculation of Iron Filings as a Precursor of High-Performance LiFePO4/C Cathode for Lithium-Ion Batteries

This study presents an economic and environmentally friendly method for the synthesis of microspherical FePO₄·2H₂O precursors with secondary nanostructures by the electroflocculation of low-cost iron fillers in a hot solution. The morphology and crystalline shape of the precursors were adjusted by gradient co-precipitation of pH conditions. The effect of precursor structure and morphology on the electrochemical performance of the synthesized LiFePO₄/C was investigated. Electrochemical analysis showed that the assembly of FePO₄·2H₂O submicron spherical particles from primary nanoparticles and nanorods resulted in LiFePO₄/C exhibiting excellent multiplicity and cycling performance with first discharge capacities at 0.2C, 1C, 5C, and 10C of 162.8, 134.7, 85.5, and 47.7 mAh·g^-1, respectively, and the capacity of LiFePO₄/C was maintained at 85.5% after 300 cycles at 1C. The significant improvement in the electrochemical performance of LiFePO₄/C was attributed to the enhanced Li⁺ diffusion rate and the crystallinity of LiFePO₄/C. Thus, this work shows a new three-dimensional mesoporous FePO₄ synthesized from the iron flake electroflocculation as a precursor for high-performance LiFePO₄/C cathodes for lithium-ion batteries.

Validating the Electronic Structure of Vanadium Phosphate Cathode Materials

Investigation of the electronic structure of contending battery electrode materials is an essential step for developing a detailed mechanistic understanding of charge-discharge properties. Herein, we use synchrotron soft X-ray absorption spectroscopy (XAS) in combination with complementary experiments and density functional theory calculations to map the electronic structure, band positioning, and band gap of prototype vanadium(III) phosphate cathode materials, Na₃V₂(PO₄)₃, Li₃V₂(PO₄)₃, and K₃V₃(PO₄)₄·H₂O, for alkali-ion rechargeable batteries. XAS fluorescence yield and electron yield measurements reveal substantial variation in surface-to-bulk atomic structure, vanadium oxidation states, and density of oxygen hole states across all samples. We attribute this variation to an intrinsic alkali metal surface depletion identified across these alkali metal vanadium(III) phosphates. We propose that an alkali-depleted surface provides a beneficial interface with the bulk structure(s) that raises the Fermi level and improves surface charge transfer kinetics. Furthermore, we discuss how this effect can play a significant role in reducing the electronic and ionic diffusion limitations of alkali vanadium phosphates in alkali-ion rechargeable batteries. These findings clarify the electronic structure and properties of alkali metal vanadium phosphates and offer guidance on future strategies to improve vanadium phosphate battery performance.

Improved NOx Reduction over Phosphate-Modified Fe2O3/TiO2 Catalysts Via Tailoring Reaction Paths by In Situ Creating Alkali-Poisoning Sites

The deactivation issue arising from alkali poisoning over catalysts is still a challenge for the selective catalytic reduction of NO_x by NH₃. Herein, improved NO_x reduction in the presence of alkaline metals over phosphate-modified Fe₂O₃/TiO₂ catalysts has been originally demonstrated via tailoring the reaction paths by in situ creating alkali-poisoning sites. The introduction of phosphate results in the partial formation of iron phosphate species and makes the catalyst to mainly exhibit the characteristics of FePO₄, which is responsible for the widened temperature window and enhanced alkali resistance. The tetrahedral [FeO₄]/[PO₄] structures in iron phosphate act as the Brønsted acid sites to increase the catalyst surface acidity. In addition, the formation of an Fe-O-P structure enhances the redox ability and increases surface adsorbed oxygen. Furthermore, the created phosphate groups (PO₄^3-) serving as alkali-poisoning sites preferentially combine with potassium so that iron species on the active sites are protected. Therefore, the enhanced NH₃ species adsorption capacity, improved redox ability, and active nitrate species remaining in the phosphate-modified Fe₂O₃/TiO₂ catalyst ensure the de-NO_x activity after being poisoned by alkali metals through the Langmuir-Hinshelwood reaction pathway. Hopefully, this novel strategy could provide an inspiration to design novel catalysts to control NO_x emission with extraordinary resistance to alkaline metals.

A TiSe2 -Graphite Dual Ion Battery: Fast Na-Ion Insertion and Excellent Stability

The sodium dual ion battery (Na-DIB) technology is proposed as highly promising alternative over lithium-ion batteries for the stationary electrochemical energy-storage devices. However, the sluggish reaction kinetics of anode materials seriously impedes their practical implementation. Herein, a Na-DIB based on TiSe₂ -graphite is reported. The high diffusion coefficient of Na-ions (3.21×10^-11 -1.20×10^-9  cm²  s^-1 ) and the very low Na-ion diffusion barrier (0.50 eV) lead to very fast electrode kinetics, alike in conventional surface capacitive storage systems. In-situ investigations reveal that the fast Na-ion diffusion involves four insertion stage compositions. A prototype cell shows a reversible capacity of 81.8 mAh g^-1 at current density of 100 mA g^-1 , excellent stability with 83.52 % capacity retention over 200 cycles and excellent rate performance, suggesting its potential for next-generation large scale high-performance stationary energy storage systems.

Modification of the LiFePO4 (010) Surface Due to Exposure to Atmospheric Gases

First-principles thermodynamics enables the description of the surface chemistry of inorganic materials as a function of temperature and partial pressures of atmospheric gases, providing a framework to connect atomistic simulations with macroscopic materials properties. Here we re-examine the surface chemistry of LiFePO₄ (LFP), a widely studied material for use as the cathode in Li-ion batteries. Our results reveal that at room temperature and under standard pressures the LFP (010) surface is covered with water. At elevated temperatures and reduced H₂ partial pressure, one water molecule loses a hydrogen atom and the preferred binding moieties are OH and H₂O; while further reducing the H₂O partial pressure results in the desorption of water leaving only the OH behind. This work also shines new light on the configuration, and resulting electronic properties, of the LFP (010) surface when molecular oxygen (O₂) is adsorbed. The molecular adsorbates are also shown to have an impact on the LFP surface potentials and magnetic properties. These simulations provide an enhanced picture of the LFP surface chemistry and the potential impact of these adsorbates on understanding the characteristics of LFP in different materials applications.

Anisotropic crystallite size distributions in LiFePO4 powders

The anisotropic crystallite sizes in high-performance LiFePO4 powders were measured by XRD and compared with the particle sizes found by TEM image analysis. Lognormal particle size distribution functions were determined for all three main crystallographic axes. A procedure was developed to determine the fraction of the composite particles which consists of several crystallites and contains small- and large-angle boundaries. In a sample with the most anisotropic crystallites (ratio of volume-weighted mean crystallite sizes L̄ V[001]/L̄ V[010] = 1.41) the number of the composite particles was at least 30%.

Fibre Optic Sensor for Characterisation of Lithium-Ion Batteries

The interaction between a fibre optic evanescent wave sensor and the positive electrode material, lithium iron phosphate, in a battery cell is presented. The optical-electrochemical combination was investigated in a reflection-based and a transmission-based configuration, both leading to comparable results. Both constant current cycling and cyclic voltammetry were employed to link the optical response to the charge and discharge of the battery cells, and the results demonstrated that the optical signal changed consistently with lithium ion insertion and extraction. More precisely, cyclic voltammetry showed that the intensity increased when iron was oxidised during charge and then decreased as iron was reduced during discharge. Cyclic voltammetry also revealed that the optical signal remained unchanged when essentially no oxidation or reduction of the electrode material took place. This shows that optical fibre sensors may be used as a way of monitoring state of charge and electrode properties under dynamic conditions.

Novel Fe-doped CePO4 catalyst for selective catalytic reduction of NO with NH3: The role of Fe3+ ions

Novel Fe-doped CePO₄ (Fe_xCe_1-x) catalyst was firstly successfully synthesized via a simple co-precipitation method and demonstrated excellent NH₃-SCR performance in comparison with FePO₄ and CePO₄. In order to study the promoting effects of Fe³⁺ ion on the NH₃-SCR activity of CePO₄ catalyst, various characterizations were conducted. It was found that NH₃ capacity of Fe_xCe_1-x catalyst was controlled by P sites and depended on their specific surface area. Interestingly, Fe species in Fe_xCe_1-x were not a Lewis acid site for NH₃ adsorption, but it could promote the activation of NH₃. More importantly, Fe³⁺ doping could induce the redox equilibrium of Fe³⁺ + Ce³⁺ ⇆ Fe²⁺ + Ce⁴⁺, which significantly improved redox properties of CePO₄ catalyst. Accordingly, improved catalytic activity of Fe_xCe_1-x catalysts could be attributed to the collective effects of the higher surface area, better redox properties and easily activated NH₃. Among them, superior redox property of Fe_xCe_1-x catalysts was the main reason boosting their high catalytic activity. Finally, the reaction process analyzed by in situ DRIFT proposed that the NH₃-SCR reaction over CePO₄ and Fe_xCe_1-x occurred mainly via Eley-Rideal mechanism. We anticipated this work could promote the development of novel NH₃-SCR catalyst.

Potential molecular semiconductor devices: cyclo-Cn (n = 10 and 14) with higher stabilities and aromaticities than acknowledged cyclo-C18

Theoretical calculations reveal that the zero-dimensional allotropes of carbon atoms, cyclo-C_n (n = 10 and 14), have higher thermodynamic, kinetic, optical, and dynamic stabilities and aromaticity than the acknowledged cyclo-C₁₈.