Tunable porous silica nanoparticles as a universal dye adsorbent

Multiscale Porous Carbon Materials by In Situ Growth of Metal-Organic Framework in the Micro-Channel of Delignified Wood for High-Performance Water Purification

Porous carbon materials are suitable as highly efficient adsorbents for the treatment of organic pollutants in wastewater. In this study, we developed multiscale porous and heteroatom (O, N)-doped activated carbon aerogels (CAs) based on mesoporous zeolitic imidazolate framework-8 (ZIF-8) nanocrystals and wood using 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) oxidation, in situ synthesis, and carbonization/activation. The surface carboxyl groups in a TEMPO-oxidized wood (TW) can provide considerably large nucleation sites for ZIF-8. Consequently, ZIF-8, with excellent porosity, was successfully loaded into the TW via in situ growth to enhance the specific surface area and enable heteroatom doping. Thereafter, the ZIF-8-loaded TW was subjected to a direct carbonization/activation process, and the obtained activated CA, denoted as ZIF-8/TW-CA, exhibited a highly interconnected porous structure containing multiscale (micro, meso, and macro) pores. Additionally, the resultant ZIF-8/TW-CA exhibited a low density, high specific surface area, and excellent organic dye adsorption capacity of 56.0 mg cm-3, 785.8 m2 g-1, and 169.4 mg g-1, respectively. Given its sustainable, scalable, and low-cost wood platform, the proposed high-performance CA is expected to enable the substantial expansion of strategies for environmental protection, energy storage, and catalysis.

Rapid effectual entrapment of arsenic pollutant by Fe2O3 supported on bimodal meso-macroporous silica for cleaning up aquatic system

Arsenic (As) contamination in aqueous media is a major concern due to its adverse impacts on humans and the ecosystem more broadly because of its non-biodegradability. Consequently, an effective and selective sorbent is needed urgently to scavenge As pollutant. Herein, the adsorption behaviors of As(V) by Fe₂O₃ and Fe₂O₃ supported on different silica materials, consisting of unimodal mesoporous silica (Fe₂O₃/U-SiO₂) and dual meso-macroporous silica (Fe₂O₃/B-SiO₂), were compared to examine their structure-efficiency relationships in the elimination of As(V). Fe₂O₃/B-SiO₂ was much faster at As(V) removal and had an impressively higher uptake capability, reaching nearly 50% and 2.5 mg g^-1 within 5 min compared to bare Fe₂O₃ (6% and 0.3 mg g^-1) and Fe₂O₃/U-SiO₂ (11.9% and 0.59 mg g^-1). These better results were because of the highly dispersed Fe₂O₃ nanoparticles on the B-SiO₂ support that provided abundant reactive sites as well as a macropore structure facilitating As(V) diffusion into adsorptive sites. The maximum adsorptive capacity of Fe₂O₃/B-SiO₂ (4.7 mg As per 1 g adsorbent) was 1.3- and 1.7-fold greater than for Fe₂O₃/U-SiO₂ and Fe₂O₃, respectively. The outstanding performance and reusability of Fe₂O₃/B-SiO₂ with its ease of production, economical and environmentally friendly features made it even more attractive for As(V) remediation. The explored relationship between the structure of SiO₂-supported Fe₂O₃ sorbents and their performance in removing As(V) could be informative for the future design of highly efficient adsorbents for the decontamination of water.

Solid-State Reaction Synthesis of Nanoscale Materials: Strategies and Applications

Nanomaterials (NMs) with unique structures and compositions can give rise to exotic physicochemical properties and applications. Despite the advancement in solution-based methods, scalable access to a wide range of crystal phases and intricate compositions is still challenging. Solid-state reaction (SSR) syntheses have high potential owing to their flexibility toward multielemental phases under feasibly high temperatures and solvent-free conditions as well as their scalability and simplicity. Controlling the nanoscale features through SSRs demands a strategic nanospace-confinement approach due to the risk of heat-induced reshaping and sintering. Here, we describe advanced SSR strategies for NM synthesis, focusing on mechanistic insights, novel nanoscale phenomena, and underlying principles using a series of examples under different categories. After introducing the history of classical SSRs, key theories, and definitions central to the topic, we categorize various modern SSR strategies based on the surrounding solid-state media used for nanostructure growth, conversion, and migration under nanospace or dimensional confinement. This comprehensive review will advance the quest for new materials design, synthesis, and applications.

Spherical mesoporous silica designed for the removal of methylene blue from water under strong acidic conditions

This work proposes a novel technology for environmental remediation based on mesoporous silica spheres, which were successfully synthesized by the solvothermal method using the cetyltrimethylammonium bromide as a structuring agent. The adsorbent was designed to remove cationic dyes at strong acidic conditions. The surface was modified by a careful thermal treatment aiming at the condensation of silanol to siloxane groups. The adsorbent was characterized by XRD, SEM, FTIR, N₂ adsorption/desorption and the equilibrium technique to determine the pH_pzc. The kinetic of the adsorption followed a pseudo-second-order model and the process was ruled by physical forces. The isotherms were fitted to Freundlich and Temkin models, indicating that the physisorption occurred with multilayer formation, with the interaction adsorbate-adsorbate being relevant to the whole process. The adsorption capacity was approximately 60 mg g^-1 and the adsorbents performance in the fast-contact system showed removal of 65%wt. of a 93 mg L^-1 methylene blue (MB) solution in a single application.

Anisotropic silica coating on gold nanorods boosts their potential as SERS sensors

Gold nanorods are well-known surface-enhanced Raman scattering substrates. Under longitudinal plasmonic excitation, the ends of the nanorods experience larger local electric fields compared to the sides of the rods, suggesting that Raman-active molecules would be best detected if the molecules could preferentially bind to the ends of the nanorods. Coating the tips of gold nanorods with anionic mesoporous silica caps enabled surface-enhanced Raman scattering (SERS) detection of the cationic dye methylene blue at lower concentrations than observed for the corresponding silica coating of the entire rod. By analyzing the intensity ratio of two Raman active modes of methylene blue and the surface plasmon resonance peak shift of the gold nanorod composites, it can be inferred that at a low concentration of methylene blue, molecules adsorb to the tips of the tip coated silica gold nanorods. Functionalization of the anionic silica endcaps with cationic groups eliminates the SERS enhancement for the cationic methylene blue, demonstrating the electrostatic nature of the adsorption process in this case. These results show that anisotropic silica coatings can concentrate analytes at the tips of gold nanorods for improvements in chemical sensing and diagnostics.

A veratraldehyde-appended organosilicon probe and its hybrid silica nanoparticles as a dual chemosensor for colorimetric and fluorimetric detection of Cu2+ and Fe3+ ions

Schiff bases of veratraldehyde based organosilatranes have been synthesized. The colorimetric and fluorimetric detection of 3a and its hybrid silica nanoparticles (V-NPs) revealed significant sensorial ability only towards Cu2+ and Fe3+ ions.

Removal of Isolan Dark Blue 2SGL-01 from aqueous solutions onto calcined and uncalcined (Mg-Zn)/(Al-Fe)-(CO3)/Cl layered double hydroxides

The adsorption process of the industrialized dye Isolan Dark Blue 2SGL-01 (IDB) onto (Mg-Zn)/(Al-Fe)-(CO3)/Cl layered double hydroxides (LDHs) coded LDH21 and LDH22 and its calcined products CLDHs (CLDH21 and CLDH22), respectively, was investigated. The characterization of LDHs and CLDHs before and after loading with IDB by Fourier transform infrared, scanning electron microscope and surface area measurements showed a typical hydrotalcite structure and confirmed the loading of IDB. The adsorption parameters; initial pH, shaking time, adsorbent dose, initial concentration of IDB dye and temperature were studied. The optimum conditions for IDB adsorption were pH 4.3 and shaking time 3 h. A complete removal of IDB (> 99%) was achieved using a dosage of 2.0 g L− 1 CLDHs or LDH22, and 3.0 g L− 1 of LDH21. The adsorption processes were suggested to be best described by the pseudo-second order kinetics and Langmuir-type adsorption isotherm with monolayer capacities of 75, 91, 427 and 530 mg g− 1, onto LDH21, LDH22, CLDH21 and CLDH22, respectively. The loaded IDB was recovered from LDHs and CLDHs adsorbent using Na2CO3. CLDH22 showed best adsorption capacity of 530 mg g− 1. Its adsorption thermodynamic parameters ∆Gadsorption, ∆Hadsorption and ∆Sadsorption indicated that the adsorption processes were spontaneous and endothermic in nature. CLDH22 was successfully applied for the removal of IDB from simulated dyeing process with removal efficiency 97%.

Controlled surface functionalization of Ni-S nanostructures for pH-responsive selective and superior pollutants adsorption

Herein, we developed a synthetic strategy to functionalize Ni-S nanostructures (NS) using a facile precipitation method at moderate temperature. The surface functionality of NS is controlled by varying amount of mixed surfactants to achieve the pH-responsive selective adsorption of anionic and cationic dyes and the adsorption of ciprofloxacin (CIP) and tetracycline (TC) antibiotics. Powder XRD diffraction pattern revealed the phase of NS was changed from α-NiS to mixed phases after functionalization. The surface area of functionalized NS was significantly enhanced by ~5 times of that unfunctionalized NS as 6.6 m²g^-1 to 30.3 m²g^-1. The NS selectively adsorbed methyl orange (MO) at pH 4.5 and methylene blue (MB) at pH 11.5 with separation efficiency values of 94.2% and 97.9% respectively. The maximum adsorption capacity for MO, MB, TC and CIP are obtained as 1526.3, 1031.2, 1540.8 and 632.4 mg g^-1, respectively. The electrostatic interaction is predominantly involved in the adsorption of dyes whereas adsorption of antibiotics changed to hydrogen bonding and metal coordination. Thermodynamics parameters indicated exothermic and spontaneous adsorption of dyes. The optimized adsorbent is easily recyclable. Thus, the developed strategy of functionalization of nanostructures unveils a practical approach towards selective and efficient adsorption of organic pollutants.

Fabrication of a Nanoporous Silica Hydrogel by Cross-Linking of SiO2-H3BO3-Hexadecyltrimethoxysilane for Excellent Adsorption of Azo Dyes from Wastewater

This study reports a novel cross-linking approach to fabricate the hydrothermally neutralized silica hydrogel of SiO₂-H₃BO₃-hexadecyltrimethoxysilane by grafting alkylsilane groups onto the nanoporous silica. The synthesized silica hydrogel possessed a large specific surface area of 51.3 m²g^-1 and showed excellent dye adsorption capability of cationic dyes in neutral (pH 7) and alkaline (pH 9) medium from wastewater. The colloidal electrokinetic potential analysis revealed that the outstanding adsorption efficiency of cationic dyes over anionic dyes strongly relies on the surface charge of the hydrogels. Moreover, the hydrophobic interactions between the dye molecules and the hydrogels were studied, and it was found that the dye adsorption performance can be tuned by altering the concentration of hydrophobic reagents of the hydrogel. The dye adsorption mechanism was established, and the kinetic study suggested that the adsorption is a pseudo-second-order reaction. Adsorption isotherms at various equilibrium conditions fitted well with the Langmuir isotherm. Therefore, this strongly supports the promising and practical application of the prepared silica hydrogel. The recyclability of the hydrogel was studied, and it showed 90% adsorption efficiency by the regenerated gel up to 6 cycles, which has a high potential in wastewater treatment.

Palladium oxide-decorated mesoporous silica on graphene oxide nanosheets as a heterogeneous catalyst for the synthesis of β-substituted indole derivatives

In this work, an efficient and facile strategy has been adopted for the stepwise synthesis of the RGO-MSiO2/PdO hybrid nanomaterial (HY-NM). Herein, a hybrid nanostructure of mesoporous silica over graphene oxide (GO) sheets has been developed followed by immobilizing palladium oxide nanoparticles (PdO NPs), and then it has been utilized for catalyzing a multicomponent reaction (MCR). To authenticate the successful synthesis of the HY-NM and successive immobilization of PdO NPs, various physicochemical characterization techniques were utilized such as SEM, EDAX, HR-TEM, HR-XRD, TGA, BET, FT-IR, and XPS analysis. The activity of the HY-NM has been determined by performing the catalyst-mediated synthesis of β-substituted indole derivatives (yield 90-98%). The excellent catalytic activity of the prepared HY-NM could be observed due to its high surface area and large porosity, which facilitates the penetration and interaction of reactant molecules with the catalytic active species. This protocol eliminates the requirement of further purification after the isolation of the product from the reaction mixture. The ease of handling, recyclability of the catalyst, and simple work-up procedure are the main features of this protocol. The synthesized HY-NM could be recycled for multiple catalytic cycles making it a very effective heterogeneous catalyst.

Ultrasmall aqueous starch-capped CuS quantum dots with tunable localized surface plasmon resonance and composition for the selective and sensitive detection of mercury(ii) ions

Ultrasmall starch-capped CuS quantum dots (QDs) with controllable size were chemically fabricated in an aqueous medium. The phase of the CuS QDs was confirmed via X-ray diffraction (XRD), whereas the characteristic localized surface plasmon resonance (LSPR) peak in the near-infrared (NIR) region was measured using UV-Vis spectroscopy. Transmission electron microscopy and high bandgap analysis confirmed the formation of ultrasmall CuS QDs in the size range of 4-8 nm. CuS QDs have been used for the selective and sensitive detection of Hg2+ ions through colorimetric and spectroscopic techniques. The selective sensing of Hg2+ ions from various metal ions was detected via a remarkable change in color, damping in LSPR intensity, significant change in the Fourier-transform infrared spectra and X-ray photoelectron spectroscopic measurements. The mechanism of interaction between the CuS QDs and Hg2+ ions has been deeply explored in terms of the role played by the starch and the reorganization of sulfide and disulfide bonds to facilitate the access of Hg2+ ions into the CuS lattice. Finally, an intermediate Cu2-x Hg x S nanostructure resulted in the leaching of Cu+ ions into the solution, which were further recovered and reused for the formation of fluorescent Cu2S nanoparticles. Thus, the entire process of synthesis, sensing and reuse paves the way for sustainable nanotechnology.

A Novel Au@Cu2O-Ag Ternary Nanocomposite with Highly Efficient Catalytic Performance: Towards Rapid Reduction of Methyl Orange Under Dark Condition

Au@Cu2O core-shell nanocomposites (NCs) were synthesized by reducing copper nitrate on Au colloids with hydrazine. The thickness of the Cu2O shells could be varied by adjusting the molar ratios of Au: Cu. The results showed that the thickness of Cu2O shells played a crucial role in the catalytic activity of Au@Cu2O NCs under dark condition. The Au@Cu2O-Ag ternary NCs were further prepared by a simple galvanic replacement reaction method. Moreover, the surface features were revealed by TEM, XRD, XPS, and UV-Vis techniques. Compared with Au@Cu2O NCs, the ternary Au@Cu2O-Ag NCs had an excellent catalytic performance. The degradation of methyl orange (MO) catalyzed by Au@Cu2O-Ag NCs was achieved within 4 min. The mechanism study proved that the synergistic effects of Au@Cu2O-Ag NCs and sodium borohydride facilitated the degradation of MO. Hence, the designed Au@Cu2O-Ag NCs with high catalytic efficiency and good stability are expected to be the ideal environmental nanocatalysts for the degradation of dye pollutants in wastewater.