Single Ru atoms with precise coordination on a monolayer layered double hydroxide for efficient electrooxidation catalysis

Bridge-oxygen bonding modulates Ru single atoms for peroxymonosulfate activation: Importance of high-valent Ru species and 1O2

The application of single-atom catalysts (SACs) to advanced oxidation processes (AOPs) based on peroxymonosulfate (PMS) has attracted considerable attention. However, the catalytic pathways and mechanisms underlying these processes remain unclear. In this study, NiFe-LDH was synthesized and single Ru atoms were stably loaded onto it by forming Ru-O-M (M=Ni or Fe) bonds (Ru@NiFe-LDH). This was demonstrated using high-angle annular dark-field scanning TEM (HAADF-STEM) and X-ray absorption fine structure spectra (XANES). The Ru@NiFe-LDH/PMS system showed a high catalytic reactivity (100 % sulfamethoxazole degradation in only 30 min), high stability (97 % reactivity was maintained after continuous operation for 400 min), and wide pH suitability (working pH range 3-11) for AOPs. The crucial roles of the high-valent species (Ru(V) = O) and 1O2 in this reaction were verified. Density functional theory (DFT) calculations revealed that electron transfer produced a positively charged Ru. This enhances the adsorption of negatively charged PMS anions onto the Ru monoatomic sites, thereby, causing the formation of Ru-PMS* complexes. This study implies that the structure-function relationship between organic compounds and SACs plays a significant role in PMS-based AOPs, and provides a comprehensive mechanism for the role of high-valent species in heterogeneous Fenton-like systems.

Constructing CO-immune water dissociation sites around Pt to achieve stable operation in high CO concentration environment

The serious problem of carbon monoxide (CO) poisoning on the surface of Pt-based catalysts has long constrained the commercialization of proton exchange membrane fuel cells (PEMFCs). Regeneration of Pt sites by maintaining CO scavenging ability through precise construction of the surface and interface structure of the catalyst is the key to obtaining high-performance CO-resistant catalysts. Here, we used molybdenum carbide (MoCx) as the support for Pt and introduced Ru single atoms (SA-Ru) at the Pt-MoCx interface to jointly decrease the CO adsorption strength on Pt. More importantly, the MoCx and SA-Ru are immune to CO poisoning, which continuously assists in the oxidation of adsorbed CO by generating oxygen species from water dissociation. These two effects combine to confer this anode catalyst (SA-Ru@Pt/MoCx) remarkable CO tolerance and the ability to operate stably in fuel cell with high CO concentration (power output 85.5 mW cm-2@20,000 ppm CO + H2 - O2), making it possible to directly use the cheap reformed hydrogen as the fuel for PEMFCs.

Curved Structure Regulated Single Metal Sites for Advanced Electrocatalytic Reactions

Curved surface with defined local electronic structures and regulated surface microenvironments is significant for advanced catalytic engineering. Since single-atom catalysts are highly efficient and active, they have attracted much attention in recent years. The curvature carrier has a significant effect on the electronic structure regulation of single-atom sites, which effectively promote the catalytic efficiency. Here, the effect of the curvature structure with exposed metal atoms for catalysis is comprehensively summarized. First, the substrates with curvature features are reviewed. Second, the applications of single-atom catalysts containing curvature in a variety of different electrocatalytic reactions are discussed in depth. The impact of curvature effects in catalytic reactions is further analyzed. Finally, prospects and suggestions for their application and future development are presented. This review paves the way for the construction of high curvature-containing surface carriers, which is of great significance for single-atom catalysts development.

Atomically Dispersed Ru-doped Ti4O7 Electrocatalysts for Chlorine Evolution Reaction with a Universal Activity

Chlorine has been supplied by the chlor-alkali process that deploys dimensionally stable anodes (DSAs) for the electrochemical chlorine evolution reaction (ClER). The paramount bottlenecks have been ascribed to an intensive usage of precious elements and inevitable competition with the oxygen evolution reaction. Herein, a unique case of Ru2+-O4 active motifs anchored on Magnéli Ti4O7 (Ru-Ti4O7) via a straightforward wet impregnation and mild annealing is reported. The Ru-Ti4O7 performs radically active ClER with minimal deployment of Ru (0.13 wt%), both in 5 m NaCl (pH 2.3) and 0.1 m NaCl (pH 6.5) electrolytes. Scanning electrochemical microscopy demonstrates superior ClER selectivity on Ru-Ti4O7 compared to the DSA. Operando X-ray absorption spectroscopy and density functional theory calculations reveal a universally active ClER (over a wide range of pH and [Cl-]), through a direct adsorption of Cl- on Ru2+-O4 sites as the most plausible pathway, together with stabilized ClO* at low [Cl-] and high pH.

Enabling Specific Benzene Oxidation by Tuning the Adsorption Behavior on Au Loaded MgAl Layered Double Hydroxides

Direct and selective oxidation of benzene to phenol is a long-term goal in industry. Although great efforts have been made in homogenous catalysis, it still remains a huge challenge to drive this reaction via heterogeneous catalysts under mild conditions. Herein, a single-atom Au loaded MgAl-layered double hydroxide (Au1 -MgAl-LDH) with a well-defined structure, in which the Au single atoms are located on the top of Al3+ with Au-O4 coordination as revealed by extended x-ray-absorption fine-structure (EXAFS)and density-functional theory (DFT)calculation is reported. The photocatalytic results prove the Au1 -MgAl-LDH is capable of driving benzene oxidation reaction with O2 in water, and exhibits a high selectivity of 99% for phenol. While contrast experiment shows a ≈99% selectivity for aliphatic acid with Au nanoparticle loaded MgAl-LDH (Au-NP-MgAl-LDH). Detailed characterizations confirm that the origin of the selectivity difference can be attributed to the profound adsorption behavior of substrate benzene with Au single atoms and nanoparticles. For Au1 -MgAl-LDH, single Au-C bond is formed in benzene activation and result in the production of phenol. While for Au-NP-MgAl-LDH, multiple AuC bonds are generated in benzene activation, leading to the crack of CC bond.

Spin-Polarization Strategy for Enhanced Acidic Oxygen Evolution Activity

Spin-polarization is known as a promising way to promote the anodic oxygen evolution reaction (OER), since the intermediates and products endow spin-dependent behaviors, yet it is rarely reported for ferromagnetic catalysts toward acidic OER practically used in industry. Herein, the first spin-polarization-mediated strategy is reported to create a net ferromagnetic moment in antiferromagnetic RuO2 via dilute manganese (Mn2+ ) (S = 5/2) doping for enhancing OER activity in acidic electrolyte. Element-selective X-ray magnetic circular dichroism reveals the ferromagnetic coupling between Mn and Ru ions, fulfilling the Goodenough-Kanamori rule. The ferromagnetism behavior at room temperature can be well interpreted by first principles calculations as the interaction between the Mn2+ impurity and Ru ions. Indeed, Mn-RuO2 nanoflakes exhibit a strongly magnetic field enhanced OER activity, with the lowest overpotential of 143 mV at 10 mA cmgeo -2 and negligible activity decay in 480 h stability (vs 200 mV/195 h without magnetic field) as known for magnetic effects in the literature. The intrinsic turnover frequency is also improved to reach 5.5 s-1 at 1.45 VRHE . This work highlights an important avenue of spin-engineering strategy for designing efficient acidic oxygen evolution catalysts.

Preparation of water-dispersed monolayer LDH nanosheets by SMA intercalation to hinder the restacking upon redispersion in water

We present a novel method for preparing water-dispersed monolayer layered double hydroxide (LDH) nanosheets (m-LDH). By intercalating styrene-maleic anhydride copolymer (SMA) into LDH, we obtained m-LDH through a simple aging step that produced stable, translucent colloidal solutions. After drying, the resulting powder can be redispersed in water to recover the m-LDH monolayer structure. To our knowledge, this is the first report of immediate recovery of the m-LDH monolayer structure from dried powder after redispersion in water. Our method may have significant implications for preparing and utilizing m-LDH nanosheets in various applications.

Tuning coordination microenvironment of V2CTx MXene for anchoring single-atom toward efficient multifunctional electrocatalysis

The rational design of low-cost and high-performance multifunctional electrocatalysts for hydrogen evolution reaction (HER) and oxygen evolution/reduction reaction (OER/ORR) is essential for efficient overall water splitting and rechargeable metal-air battery. Herein, through density functional theory calculations, we creatively regulate the coordination microenvironment of V₂CT_x MXene (M-v-V₂CT₂, T = O, Cl, F and S) as substrates of single-atom catalysts (SACs), and then systematically explore their HER, OER, and ORR electrocatalytic performance. Our results disclose that Rh-v-V₂CO₂ is a promising bifunctional catalyst for water splitting (overpotentials of 0.19 and 0.37 V for HER and OER). Besides, Pt-v-V₂CCl₂ and Pt-v-V₂CS₂ possess desirable bifunctional OER/ORR activity with overpotentials of 0.49/0.55 V and 0.58/0.40 V, respectively. More interestingly, Pt-v-V₂CO₂ is a promising trifunctional catalyst under vacuum, implicit and explicit solvation conditions, which transcends commercially used Pt and IrO₂ catalysts for HER/ORR and OER. The electronic structure analysis further demonstrates that surface functionalization can optimize the local microenvironment of the SACs and thus tune the interaction strength of intermediate adsorbates. This work provides a feasible strategy for developing advanced multifunctional electrocatalysts and enriches the application of MXene in energy conversion and storage.

Role of the Support Effects in Single-Atom Catalysts

In recent years, single-atom catalysts (SACs) have received a significant amount of attention due to their high atomic utilization, low cost, high reaction activity, and selectivity for multiple catalytic reactions. Unfortunately, the high surface free energy of single atoms leads them easily migrated and aggregated. Therefore, support materials play an important role in the preparation and catalytic performance of SACs. Aiming at understanding the relationship between support materials and the catalytic performance of SACs, the support effects in SACs are introduced and reviewed herein. Moreover, special emphasis is placed on exploring the influence of the type and structure of supports on SAC catalytic performance through advanced characterization and theoretical research. Future research directions for support materials are also proposed, providing some insight into the design of SACs with high efficiency and high loading.

Addressing the Origin of Single-Atom-Activated Supports Monitored by Electrochemiluminescence

Currently, much attention has been paid to the efforts to stabilize and regulate single atoms through supports to obtain decent electrocatalytic behaviors. However, little concern was given to the effect of single atoms on modulating the electronic structure of supports, despite the catalytic activities and large quantities of supports in the catalytic reactions. Herein, we have localized Ru single atoms onto two-dimensional layered double hydroxide (NiFe-LDH) and studied the role of Ru single atoms in adjusting the electronic structure of the NiFe-LDH support. Spin polarization of 3d electrons for Fe and electron redistribution in NiFe-LDH were effectively modulated through the interaction between Ru single atoms and NiFe-LDH. As a result, the luminol redox reaction and reactive oxygen revolution were simultaneously promoted by Ru single-atom-modulated NiFe-LDH, manifested as boosted electrochemiluminescence (ECL). Therefore, we have provided valid information to reveal the regulation effect of single atoms on the spin state and electronic structure of the supports. It is anticipated that our strategy may arouse wide interest in manipulating single-atom-modulated supports.

Interface Engineering of SRu-mC3N4 Heterostructures for Enhanced Electrochemical Hydrazine Oxidation Reactions

Hydrazine oxidation in single-atom catalysts (SACs) could exploit the efficiency of metal atom utilization, which is a substitution for noble metal-based electrolysers that results in reduced overall cost. A well-established ruthenium single atom over mesoporous carbon nitride (SRu-mC3N4) catalyst is explored for the electro-oxidation of hydrazine as one of the model reactions for direct fuel cell reactions. The electrochemical activity observed with linear sweep voltammetry (LSV) confirmed that SRu-mC3N4 shows an ultra-low onset potential of 0.88 V vs. RHE, and with a current density of 10 mA/cm2 the observed potential was 1.19 V vs. RHE, compared with mesoporous carbon nitride (mC3N4) (1.77 V vs. RHE). Electrochemical impedance spectroscopy (EIS) and chronoamperometry (i-t) studies on SRu-mC3N4 show a smaller charge-transfer resistance (RCt) of 2950 Ω and long-term potential, as well as current stability of 50 h and 20 mA/cm2, respectively. Herein, an efficient and enhanced activity toward HzOR was demonstrated on SRu-mC3N4 from its synergistic platform over highly porous C3N4, possessing large and independent active sites, and improving the subsequent large-scale reaction.

VO4 -Modified Layered Double Hydroxides Nanosheets for Highly Selective Photocatalytic CO2 Reduction to C1 Products

The conversion of CO₂ into high-value added chemicals driven by solar energy is an effective way to solve environmental problems, which is, however, largely restricted by the competition reaction of the hydrogen evolution reaction (HER) and easy electron-hole recombination, etc. Herein, VO₄ -supported ultrathin NiMgV-layered double hydroxide (V/NiMgV-LDH) nanosheets are successfully fabricated, and the extended X-ray absorption fine structure (EXAFS) and density function theory (DFT) calculations reveal that VO₄ species are located on the top of V atoms in the NiMgV-LDH laminate. The V/NiMgV-LDH is proved to be highly efficient for the photocatalytic CO₂ reduction reaction (CO₂ PR) with high selectivity of 99% for C1 products and nearly no HER (<1%) takes place under visible light. Contrast experiments using NiMgV-LDH as the catalyst for CO₂ PR show a CO selectivity of 71.40% and a H₂ selectivity of 28.11%. Such excellent performance of V/NiMgV-LDH can be attributed to the following reasons: 1) the V/NiMgV-LDH modulates the band structure and promotes the separation of electrons and holes; 2) strong bonding between V/NiMgV-LDH and CO* and H* facilitates the hydrogenation to form CH₄ and inhibits the formation of by-product H₂ at the same time.

Highly efficient overall urea electrolysis via single-atomically active centers on layered double hydroxide

Anodic urea oxidation reaction (UOR) is an intriguing half reaction that can replace oxygen evolution reaction (OER) and work together with hydrogen evolution reaction (HER) toward simultaneous hydrogen fuel generation and urea-rich wastewater purification; however, it remains a challenge to achieve overall urea electrolysis with high efficiency. Herein, we report a multifunctional electrocatalyst termed as Rh/NiV-LDH, through integration of nickel-vanadium layered double hydroxide (LDH) with rhodium single-atom catalyst (SAC), to achieve this goal. The electrocatalyst delivers high HER mass activity of 0.262 A mg^-1 and exceptionally high turnover frequency (TOF) of 2.125 s^-1 at an overpotential of 100 mV. Moreover, exceptional activity toward urea oxidation is addressed, which requires a potential of 1.33 V to yield 10 mA cm^-2, endorsing the potential to surmount the sluggish OER. The splendid catalytic activity is enabled by the synergy of the NiV-LDH support and the atomically dispersed Rh sites (located on the Ni-V hollow sites) as evidenced both experimentally and theoretically. The self-supported Rh/NiV-LDH catalyst serving as the anode and cathode for overall urea electrolysis (1 mol L^-1 KOH with 0.33 mol L^-1 urea as electrolyte) only requires a small voltage of 1.47 V to deliver 100 mA cm^-2 with excellent stability. This work provides important insights into multifunctional SAC design from the perspective of support sites toward overall electrolysis applications.

Insights into the Superstable Mineralization of Chromium(III) from Wastewater by CuO

The removal of Cr^III ions from contaminated wastewater is of great urgency from both environmental protection and resource utilization perspectives. Herein, we developed a superstable mineralization method to immobilize Cr³⁺ ions from wastewater using CuO as a stabilizer, leading to the formation of a CuCr layered double hydroxide (denoted as CuCr-LDH). CuO showed a superior Cr³⁺ removal performance with a removal efficiency of 97.97% and a maximum adsorption capacity of 207.6 mg/g in a 13000 mg/L Cr³⁺ ion solution. In situ and ex situ X-ray absorption fine structure characterizations were carried out to elucidate the superstable mineralization mechanism. Two reaction pathways were proposed including coprecipitation-dissolution and topological transformation. The mineralized product of CuCr-LDH can be reused for the efficient removal of organic dyes, and the adsorption capacities were up to 248.0 mg/g for Congo red and 240.1 mg/g for Evans blue, respectively. Moreover, CuCr-LDH exhibited a good performance for photocatalytic CO₂ reduction to syngas (H₂/CO = 2.66) with evolution rates of 54.03 μmol/g·h for CO and of 143.94 μmol/g·h for H₂ under λ > 400 nm, respectively. More encouragingly, the actual tanning leather Cr³⁺ wastewater treated by CuO showed that Cr³⁺ can reduce from 3438 to 0.06 mg/L, which was much below discharge standards (1.5 mg/L). This work provides a new approach to the mineralization of Cr³⁺ ions through the "salt-oxide" route, and the findings reported herein may guide the future design of highly efficient mineralization agents for heavy metals.

Co-Existence of Atomic Pt and CoPt Nanoclusters on Co/SnOx Mix-Oxide Demonstrates an Ultra-High-Performance Oxygen Reduction Reaction Activity

An effective approach for increasing the Noble metal-utilization by decorating the atomic Pt clusters (1 wt.%) on the CoO₂@SnPd₂ nanoparticle (denoted as CSPP) for oxygen reduction reaction (ORR) is demonstrated in this study. For the optimum case when the impregnation temperature for Co-crystal growth is 50 °C (denoted as CSPP-50), the CoPt nanoalloys and Pt-clusters decoration with multiple metal-to-metal oxide interfaces are formed. Such a nanocatalyst (NC) outperforms the commercial Johnson Matthey-Pt/C (J.M.-Pt/C; 20 wt.% Pt) catalyst by 78-folds with an outstanding mass activity (MA) of 4330 mA mg_Pt^-1 at 0.85 V vs. RHE in an alkaline medium (0.1 M KOH). The results of physical structure inspections along with electrochemical analysis suggest that such a remarkable ORR performance is dominated by the potential synergism between the surface anchored Pt-clusters, CoPt-nanoalloys, and adjacent SnPd₂ domain, where Pt-clusters offer ideal adsorption energy for O₂ splitting and CoPt-nanoalloys along with SnPd₂ domain boost the subsequent desorption of hydroxide ions (OH^-).

Layered double hydroxide-based nanomaterials for biomedical applications

Against the backdrop of increased public health awareness, inorganic nanomaterials have been widely explored as promising nanoagents for various kinds of biomedical applications. Layered double hydroxides (LDHs), with versatile physicochemical advantages including excellent biocompatibility, pH-sensitive biodegradability, highly tunable chemical composition and structure, and ease of composite formation with other materials, have shown great promise in biomedical applications. In this review, we comprehensively summarize the recent advances in LDH-based nanomaterials for biomedical applications. Firstly, the material categories and advantages of LDH-based nanomaterials are discussed. The preparation and surface modification of LDH-based nanomaterials, including pristine LDHs, LDH-based nanocomposites and LDH-derived nanomaterials, are then described. Thereafter, we systematically describe the great potential of LDHs in biomedical applications including drug/gene delivery, bioimaging diagnosis, cancer therapy, biosensing, tissue engineering, and anti-bacteria. Finally, on the basis of the current state of the art, we conclude with insights on the remaining challenges and future prospects in this rapidly emerging field.

Single Atom Catalysts for Selective Methane Oxidation to Oxygenates

Direct conversion of methane (CH₄) to C_1-2 liquid oxygenates is a captivating approach to lock carbons in transportable value-added chemicals, while reducing global warming. Existing approaches utilizing the transformation of CH₄ to liquid fuel via tandemized steam methane reforming and the Fischer-Tropsch synthesis are energy and capital intensive. Chemocatalytic partial oxidation of methane remains challenging due to the negligible electron affinity, poor C-H bond polarizability, and high activation energy barrier. Transition-metal and stoichiometric catalysts utilizing harsh oxidants and reaction conditions perform poorly with randomized product distribution. Paradoxically, the catalysts which are active enough to break C-H also promote overoxidation, resulting in CO₂ generation and reduced carbon balance. Developing catalysts which can break C-H bonds of methane to selectively make useful chemicals at mild conditions is vital to commercialization. Single atom catalysts (SACs) with specifically coordinated metal centers on active support have displayed intrigued reactivity and selectivity for methane oxidation. SACs can significantly reduce the activation energy due to induced electrostatic polarization of the C-H bond to facilitate the accelerated reaction rate at the low reaction temperature. The distinct metal-support interaction can stabilize the intermediate and prevent the overoxidation of the reaction products. The present review accounts for recent progress in the field of SACs for the selective oxidation of CH₄ to C_1-2 oxygenates. The chemical nature of catalytic sites, effects of metal-support interaction, and stabilization of intermediate species on catalysts to minimize overoxidation are thoroughly discussed with a forward-looking perspective to improve the catalytic performance.

Highly Durable Heterogeneous Atomic Catalysts

ConspectusSingle-atom catalysts (SACs), in which surface metal atoms are isolated on the surface of a support, have received a tremendous amount of attention recently because this structure would utilize precious metals fully, without occluding atoms inside nanoparticles, and enable unique surface reactions which typical nanoparticle catalysts cannot induce. Various synthesis methods and characterization techniques have been reported that yield enhanced activity and selectivity. The single-atom structures were realized on various supports such as metal oxide/carbide/nitride, porous materials derived from zeolite or metal-organic frameworks, and carbon-based materials. Additionally, when the metal atoms are isolated on other metal nanoparticles, this material is denoted as a single-atom alloy (SAA). The single-atom structure, however, cannot catalyze the surface reaction that necessitates ensemble sites, where several metal atoms are located nearby. Very recently, ensemble catalysts, in which all of the metal atoms are exposed at the surface with neighboring metal atoms, have been reported, overcoming the limitation of single-atom catalysts. We call all of these materials (SACs, SAAs, and ensemble catalyst) heterogeneous atomic catalysts, indicating that the surface metal atomic structure is intentionally controlled. To use these atomic catalysts for practical applications, high durability should be guaranteed, which has received relatively less attention.In this Account, we discuss recent examples of heterogeneous atomic catalysts with high durability. Structural stability, indicating whether the surface atomic structure is thermodynamically stable, should be carefully considered. Typically, metal atoms are immobilized on a highly defective support, stabilizing both the metal atom and the support. The surface metal atoms might become destabilized upon the adsorption of chemical intermediates. This transient behavior should be carefully monitored; density functional theory (DFT) calculations are particularly useful in estimating this stability. Aside from structural stability, the catalyst performance can be degraded significantly by poisoning with impurities. If the single-atom sites are susceptible to impurities with stronger adsorption, the surface reaction would not occur efficiently, leading to a decrease in activity without structure degradation. A long-term durability test should be performed for target reactions. Heterogeneous atomic catalysts have been used for various electrochemical, photocatalytic, and thermal reactions. Although electricity, light, and heat are just different forms of energy, the specific conditions which the catalyst should satisfy are different. Whereas precious metal atoms are mostly used as surface-active sites, the properties of the support are different depending on the type of reaction. For example, the support should have high conductivity for electrochemical reactions, it should be able to absorb light for photocatalytic reactions, and it should be durable at high temperature in the presence of steam for thermal reactions. Highly durable heterogeneous atomic catalysts are certainly possible with a great potential for practical applications. These new catalysts can accelerate the current paradigm shift toward more sustainable chemical production.

Modulating the Local Coordination Environment of Single-Atom Catalysts for Enhanced Catalytic Performance in Hydrogen/Oxygen Evolution Reaction

Single-atom catalysts (SACs) hold the promise of utilizing 100% of the participating atoms in a reaction as active catalytic sites, achieving a remarkable boost in catalytic efficiency. Thus, they present great potential for noble metal-based electrochemical application systems, such as water electrolyzers and fuel cells. However, their practical applications are severely hindered by intrinsic complications, namely atom agglomeration and relocation, originating from the uncontrollably high surface energy of isolated single-atoms (SAs) during postsynthetic treatment processes or catalytic reactions. Extensive efforts have been made to develop new methodologies for strengthening the interactions between SAs and supports, which could ensure the desired stability of the active catalytic sites and their full utilization by SACs. This review covers the recent progress in SACs development while emphasizing the association between the regulation of coordination environments (e.g., coordination atoms, numbers, sites, structures) and the electrocatalytic performance of the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). The crucial role of coordination chemistry in modifying the intrinsic properties of SACs and manipulating their metal-loading, stability, and catalytic properties is elucidated. Finally, the future challenges of SACS development and the industrial outlook of this field are discussed.

NiFe layered double hydroxide nanosheets array for high-efficiency electrocatalytic reduction of nitric oxide to ammonia

Here, we demonstrate that at ambient conditions, nickel-iron layered double hydroxide nanosheets array can achieve a promising NORR performance, delivering a maximal faradaic efficiency of 82% and a corresponding yield...

Atomic Metal-Support Interaction Enables Reconstruction-Free Dual-Site Electrocatalyst

Real bifunctional electrocatalysts for hydrogen evolution reaction and oxygen evolution reaction have to be the ones that exhibit a steady configuration during/after reaction without irreversible structural transformation or surface reconstruction. Otherwise, they can be termed as "precatalysts" rather than real catalysts. Herein, through a strongly atomic metal-support interaction, single-atom dispersed catalysts decorating atomically dispersed Ru onto a nickel-vanadium layered double hydroxide (LDH) scaffold can exhibit excellent HER and OER activities. Both in situ X-ray absorption spectroscopy and operando Raman spectroscopic investigation clarify that the presence of atomic Ru on the surface of nickel-vanadium LDH is playing an imperative role in stabilizing the dangling bond-rich surface and further leads to a reconstruction-free surface. Through strong metal-support interaction provided by nickel-vanadium LDH, the significant interplay can stabilize the reactive atomic Ru site to reach a small fluctuation in oxidation state toward cathodic HER without reconstruction, while the atomic Ru site can stabilize the Ni site to have a greater structural tolerance toward both the bond constriction and structural distortion caused by oxidizing the Ni site during anodic OER and boost the oxidation state increase in the Ni site that contributes to its superior OER performance. Unlike numerous bifunctional catalysts that have suffered from the structural reconstruction/transformation for adapting the HER/OER cycles, the proposed Ru/Ni₃V-LDH is characteristic of steady dual reactive sites with the presence of a strong metal-support interaction (i.e., Ru and Ni sites) for individual catalysis in water splitting and is revealed to be termed as a real bifunctional electrocatalyst.

Recent Advances in Synthesis and Applications of Single-Atom Catalysts for Rechargeable Batteries

The rapid development of flexible and wearable optoelectronic devices, demanding the superior, reliable, and ultra-long cycling energy storage systems. But poor performances of electrode materials used in energy devices are main obstacles. Recently, single-atom catalysts (SACs) are considered as emerging and potential candidates as electrode materials for battery devices. Herein, we have discussed the recent methods for the fabrication of SACs for rechargeable metal-air batteries, metal-CO₂ batteries, metal-sulfur batteries, and other batteries, following the recent advances in assembling and performance of these batteries by using SACs as electrode materials. The role of SACs to solve the bottle-neck problems of these energy storage devices and future perspectives are also discussed.

Hydrogen production coupled with water and organic oxidation based on layered double hydroxides

Hydrogen production via electrochemical water splitting is one of the most green and promising ways to produce clean energy and address resource crisis, but still suffers from low efficiency and high cost mainly due to the sluggish oxygen evolution reaction (OER) process. Alternatively, electrochemical hydrogen-evolution coupled with alternative oxidation (EHCO) has been proposed as a considerable strategy to improve hydrogen production efficiency combined with the production of high value-added chemicals. Although with these merits, high-efficient electrocatalysts are always needed in practical operation. Typically, layered double hydroxides (LDHs) have been developed as a large class of advanced electrocatalysts toward both OER and EHCO with high efficiency and stability. In this review, we have summarized the latest progress of hydrogen production from the perspectives of designing efficient LDHs-based electrocatalysts for OER and EHCO. Particularly, the influence of structure design and component regulation on the efficiency of their electrocatalytic process have been discussed in detail. Finally, we look forward to the challenges in the field of hydrogen production via electrochemical water splitting coupled with organic oxidation, such as the mechanism, selected oxidation as well as system design, hoping to provide certain inspiration for the development of low-cost hydrogen production technology.

Controllable Modulation of Defects for Layered Double Hydroxide Nanosheets by Altering Intercalation Anions for Efficient Electrooxidation Catalysis

Hydrazine (N₂ H₄ ) is considered as one of the most potential energy storage materials in liquid fuel cells, as it contains high energy and power density, and the high-efficiency oxidation of N₂ H₄ in fuel cells has drawn great attention. However, the most used catalysts are expensive noble metal catalysts, thus the development of highly efficient non-noble metal catalysts is crucial to reduce the cost of hydrazine oxidation in practical industry. Herein, we synthesized a series of CoFe-layered double hydroxides (CoFe-LDHs) intercalated with different anions via a simple one-step co-precipitation method for the electrooxidation of hydrazine. Through altering the intercalated anions of CoFe-LDHs, the defects and the electronic structure can be well controlled, and the catalytic performance for the electrooxidation of hydrazine were well promoted by using NO₃ ^- intercalated into CoFe-LDH compared with other anions (like Cl^- , BO₃ ^3- , CO₃ ^2- ). This work developed a series of hydrazine electrooxidation catalysts and established the relationship between the intercalated anions, the fine structure of the catalyst and the electrocatalytic performance.

High-Density Ruthenium Single Atoms Anchored on Oxygen-Vacancy-Rich g-C3N4-C-TiO2 Heterostructural Nanosphere for Efficient Electrocatalytic Hydrogen Evolution Reaction

Designing and constructing high-density single-atom catalysts (SACs) is vital for electrochemical hydrogen evolution to meet the demand for fundamental research and practical applications of electrocatalysis. However, it is challenging to synthesize atomically dispersed electrocatalysts with high density and high performance. Herein, an integrated g-C₃N₄-C-TiO₂ heterostructural nanosphere with oxygen-rich vacancies is constructed by a multicomponent assembly-calcination strategy. Abundant single Ru atoms (12.4 wt %) are then anchored via the occupation of partial oxygen vacancies, forming a unique Ru/g-C₃N₄-C-TiO₂ heterostructure. A reasonable configuration is developed including single Ru atoms bonded with two oxygens and two nitrogens and coupled with jacent oxygen vacancies on the g-C₃N₄-C-TiO₂ nanosphere. Density functional theory calculations reveal that the remaining oxygen vacancies are beneficial for water dissociation, while single Ru atoms facilitate hydrogen adsorption. As expected, the result exhibits high electrocatalytic activity, delivering overpotentials of 112 and 107 mV at 10 mA cm^-2, Tafel slopes of 83 and 65 mV dec^-1 in H₂SO₄ and KOH, and a turnover frequency of 0.28 H₂ s^-1 at -100 mV toward the hydrogen evolution reaction (HER). Benefiting from the outstanding electrocatalytic performance, such a unique heterostructure with dense single Ru sites and oxygen vacancies could serve as a prominent alternative HER catalyst for renewable energy applications.

Rational Design of Single-Atom Site Electrocatalysts: From Theoretical Understandings to Practical Applications

Atomically dispersed metal-based electrocatalysts have attracted increasing attention due to their nearly 100% atomic utilization and excellent catalytic performance. However, current fundamental comprehension and summaries to reveal the underlying relationship between single-atom site electrocatalysts (SACs) and corresponding catalytic application are rarely reported. Herein, the fundamental understandings and intrinsic mechanisms underlying SACs and corresponding electrocatalytic applications are systemically summarized. Different preparation strategies are presented to reveal the synthetic strategies with engineering the well-defined SACs on the basis of theoretical principle (size effect, metal-support interactions, electronic structure effect, and coordination environment effect). Then, an overview of the electrocatalytic applications is presented, including oxygen reduction reaction, hydrogen evolution reaction, oxygen evolution reaction, oxidation of small organic molecules, carbon dioxide reduction reaction, and nitrogen reduction reaction. The underlying structure-performance relationship between SACs and electrocatalytic reactions is also discussed in depth to expound the enhancement mechanisms. Finally, a summary is provided and a perspective supplied to demonstrate the current challenges and opportunities for rational designing, synthesizing, and modulating the advanced SACs toward electrocatalytic reactions.

Ultrathin NiSe Nanosheets on Ni Foam for Efficient and Durable Hydrazine-Assisted Electrolytic Hydrogen Production

Hydrazine-assisted electrochemical water splitting is an important avenue toward low cost and sustainable hydrogen production. An efficient and stable bifunctional electrocatalyst for the hydrogen evolution reaction (HER) and the anodic hydrazine oxidation reaction (HzOR) is fundamental to this goal. Herein, we employed a facile method to fabricate ultrathin NiSe nanosheet arrays on nickel foam (NiSe/NF), which exhibits predominant electrocatalytic activity for both HER and HzOR. Our investigations revealed that the excellent electrocatalytic activity of the NiSe/NF mainly arises from the abundant electrocatalytic active sites endowed by the ultrathin nanosheet morphology, the rugged feature of the extended (100) nanosheet surface, the rich presence of Se on the nanosheet surface, and the three-dimensional (3D) porous structure of the NF and other factors such as high conductivity of the NiSe/NF and strong NiSe-NF adhesion. We assembled a hydrazine-boosted electrochemical water splitting cell using NiSe/NF as a bifunctional catalyst for both of the electrodes, and the constructed cell exhibits an ultralow overpotential (310 mV at 10 mA cm^-2), which is robust for 30 h continuous electrolysis in a 1 M KOH electrolyte. This work provides a promising avenue toward low cost, high-efficiency, and stable hydrogen production based on hydrazine-assisted electrolytic water splitting for future.

3D hollow Bi2O3@CoAl-LDHs direct Z-scheme heterostructure for visible-light-driven photocatalytic ammonia synthesis

In this paper, the novel 3D hollow Z-scheme heterojunction photocatalysts based on Bi₂O₃ and CoAl layered double hydroxides (Bi₂O₃@CoAl-LDHs) were prepared for efficient visible-light-driven photocatalytic ammonia synthesis. The synthesized nanohybrid exhibits excellent photocatalytic ammonia synthesis performance (48.7 μmol·L^-1·h^-1) and structural stability, which is primarily attributed to the fact that Z-scheme heterojunction significantly enhanced lifetime of photogenerated carriers (6.22 ns) and transfer efficiency of surface photogenerated electrons (72.5%). Strict control experiments and nitrogen isotope labeling results show that nitrogen and hydrogen in the produced ammonia come from nitrogen and water in the reactant respectively. Electron paramagnetic resonance (EPR) experiments and density functional theory (DFT) calculations further reveal that the built-in electric field due to the difference between Bi₂O₃ and CoAl-LDHs is the key to constructing the Z-scheme heterojunction. In addition, results of partial density of states (PDOS) show that Co in Bi₂O₃@CoAl-LDHs composite is the active site for photocatalytic N₂ fixation.

Preparation and application of layered double hydroxide nanosheets

Layered double hydroxides (LDH) with unique structure and excellent properties have been widely studied in recent years. LDH have found widespread applications in catalysts, polymer/LDH nanocomposites, anion exchange materials, supercapacitors, and fire retardants. The exfoliated LDH ultrathin nanosheets with a thickness of a few atomic layers enable a series of new opportunities in both fundamental research and applications. In this review, we mainly summarize the LDH exfoliation methods developed in recent years, the recent developments for the direct synthesis of LDH single-layer nanosheets, and the applications of LDH nanosheets in catalyzing oxygen evolution reactions, crosslinkers, supercapacitors and delivery carriers.

Nanostructured RuO2-Co3O4@RuCo-EO with low Ru loading as a high-efficiency electrochemical oxygen evolution catalyst

Electrochemical water splitting technology is considered to be the most reliable method for converting renewable energy such as wind and solar energy into hydrogen. Here, a nanostructured RuO₂/Co₃O₄–RuCo-EO electrode is designed via magnetron sputtering combined with electrochemical oxidation for the oxygen evolution reaction (OER) in an alkaline medium. The optimized RuO₂/Co₃O₄–RuCo-EO electrode with a Ru loading of 0.064 mg cm⁻² exhibits excellent electrocatalytic performance with a low overpotential of 220 mV at the current density of 10 mA cm⁻² and a low Tafel slope of 59.9 mV dec⁻¹ for the OER. Compared with RuO₂ prepared by thermal decomposition, its overpotential is reduced by 82 mV. Meanwhile, compared with RuO₂ prepared by magnetron sputtering, the overpotential is also reduced by 74 mV. Furthermore, compared with the RuO₂/Ru with core–shell structure (η = 244 mV), the overpotential is still decreased by 24 mV. Therefore, the RuO₂/Co₃O₄–RuCo-EO electrode has excellent OER activity. There are two reasons for the improvement of the OER activity. On the one hand, the core–shell structure is conducive to electron transport, and on the other hand, the addition of Co adjusts the electronic structure of Ru.

The optimized RuO₂/Co₃O₄–RuCo-EO electrode with Ru loading of 0.064 mg cm⁻² exhibits the excellent oxygen evolution activity with an overpotential of 220 mV at the current density of 10 mA cm⁻² and a Tafel slope of 59.9 mV dec⁻¹.

Tandem catalyzing the hydrodeoxygenation of 5-hydroxymethylfurfural over a Ni3Fe intermetallic supported Pt single-atom site catalyst

Single-atom site catalysts (SACs) have been used in multitudinous reactions delivering ultrahigh atom utilization and enhanced performance, but it is challenging for one single atom site to catalyze an intricate tandem reaction needing different reactive sites. Herein, we report a robust SAC with dual reactive sites of isolated Pt single atoms and the Ni3Fe intermetallic support (Pt1/Ni3Fe IMC) for tandem catalyzing the hydrodeoxygenation of 5-hydroxymethylfurfural (5-HMF). It delivers a high catalytic performance with 99.0% 5-HMF conversion in 30 min and a 2, 5-dimethylfuran (DMF) yield of 98.1% in 90 min at a low reaction temperature of 160 °C, as well as good recyclability. These results place Pt1/Ni3Fe IMC among the most active catalysts for the 5-HMF hydrodeoxygenation reaction reported to date. Rational control experiments and first-principles calculations confirm that Pt1/Ni3Fe IMC can readily facilitate the hydrodeoxygenation reaction by a tandem mechanism, where the single Pt site accounts for C[double bond, length as m-dash]O group hydrogenation and the Ni3Fe interface promotes the C-OH bond cleavage. This interfacial tandem catalysis over the Pt single-atom site and Ni3Fe IMC support may develop new opportunities for the rational structural design of SACs applied in other heterogeneous tandem reactions.

Atomically dispersed Rh-doped NiFe layered double hydroxides: precise location of Rh and promoting hydrazine electrooxidation properties

Noble metal-based catalysts have attracted huge attention owing to their intriguing activity and selectivity. Revealing noble metal active sites and keeping them in a form of stable and high loading are crucial to improving the catalytic performance and understanding the reaction mechanism. Herein, a feasible preparation method was used to synthesize a Rh-based ultrathin NiFe layered double hydroxide (Rh/NiFe). The detailed study proved that the existence form of Rh atoms is atomically dispersed. Moreover, extended X-ray absorption fine structure (EXAFS) with theoretical calculation of X-ray absorption near-edge structure (XANES) and density functional theory (DFT) were used to identify at the atomic level the precise location and coordination environment of the introduced Rh atoms. It was found that Rh atoms are doped in the LDH layer in a coplanar position with Ni and Fe atoms. With a 5.4 wt% loading amount of Rh, the modified catalyst of Rh/NiFe-5.4 requires 80 mV less than unmodified ultrathin NiFe layered double hydroxide (NiFe) for hydrazine electrooxidation. The XAFS fitting revealed that the doping of Rh atoms results in the distortion of the laminate and then introduces certain defects, which may be attributed to electron transport, thus endowing them with exceptional electrocatalytic performance.