Study on influencing factors of Pickering emulsions stabilized by hydroxyapatite nanoparticles with nonionic surfactants

Hydroxyapatite nanoparticle-modified porous bone grafts with improved cell attachment

Emulsion-templated foams have displayed promise as injectable bone grafts; however, the use of a surfactant as an emulsifier resulted in relatively small pores and impedes cell attachment. Hydroxyapatite nanoparticles were explored as an alternative stabilizer to address these limitations. To this end, hydroxyapatite nanoparticles were first modified with myristic acid to generate the appropriate balance of hydrophobicity to stabilize a water-in-oil emulsion of neopentyl glycol diacrylate and 1,4-butanedithiol. In situ surface modification of the resulting foam with hydroxyapatite was confirmed with elemental mapping and transmission electron microscopy. Nanoparticle-stabilized foams displayed improved human mesenchymal stem cell viability (91 ± 5%) over surfactant-stabilized foams (23 ± 11%). Although the pore size was appropriate for bone grafting applications (115 ± 71 μm), the foams lacked the interconnected architecture necessary for cell infiltration. We hypothesized that a co-stabilization approach with both surfactant and nanoparticles could be used to achieve interconnected pores while maintaining improved cell attachment and larger pore sizes. A range of hydroxyapatite nanoparticle and surfactant concentrations were investigated to determine the effects on microarchitecture and cell behavior. By balancing these interactions, a co-stabilized foam was identified that possessed large, interconnected pores (108 ± 67 μm) and improved cell viability and attachment. The co-stabilized foam was then evaluated as an injectable bone graft including network formation, microscale integration with bone, push out strength, and compressive properties. Overall, this work demonstrated that in situ surface modification with nHA improved cell attachment while retaining desirable bone grafting features and injectability.

Adding nanoparticles to improve emulsion efficiency and enhance microbial degradation in Pickering emulsions

Interfacial microbial degradation of alkane in Pickering emulsions stabilized by hydrophobic bacterial cells is a new mechanism for microbial degradation of water-insoluble chemicals, where both water-insoluble chemicals in the oil phase and water-soluble nutrients (such as nitrogen and phosphorus) in the water phase are bio-accessible to living microorganisms anchoring onto the oil-water interfaces. In the present work, super-hydrophobic Mycobacterium sp. (contact angle 168.6°) degradation of tetradecane was set up as a model. Addition of fumed SiO2 particles (Aerosil® R974) as a new strategy was developed to enhance tetradecane degradation where the biodegradation rate (based on the accumulated biomass) increased by approximately 80%. The enhanced effect of SiO2 particles on the tetradecane degradation attributed to the synergistic effect of SiO2 particles on the emulsion efficiency of Pickering emulsions stabilized by bacterial cells and then on the enhancement of interfacial microbial degradation in Pickering emulsions. KEY POINTS: • Interfacial microbial degradation in bacterial cells stabilized Pickering emulsions. • Adding fumed SiO2 particles to enhance microbial degradation of tetradecane. • Correlation relationship between emulsion efficiency and interfacial microbial degradation.

Pickering Emulsions Based in Inorganic Solid Particles: From Product Development to Food Applications

Pickering emulsions (PEs) have attracted attention in different fields, such as food, pharmaceuticals and cosmetics, mainly due to their good physical stability. PEs are a promising strategy to develop functional products since the particles’ oil and water phases can act as carriers of active compounds, providing multiple combinations potentiating synergistic effects. Moreover, they can answer the sustainable and green chemistry issues arising from using conventional emulsifier-based systems. In this context, this review focuses on the applicability of safe inorganic solid particles as emulsion stabilisers, discussing the main stabilisation mechanisms of oil–water interfaces. In particular, it provides evidence for hydroxyapatite (HAp) particles as Pickering stabilisers, discussing the latest advances. The main technologies used to produce PEs are also presented. From an industrial perspective, an effort was made to list new productive technologies at the laboratory scale and discuss their feasibility for scale-up. Finally, the advantages and potential applications of PEs in the food industry are also described. Overall, this review gathers recent developments in the formulation, production and properties of food-grade PEs based on safe inorganic solid particles.

Correlation Relationship between Phase Inversion of Pickering Emulsions and Biocatalytic Activity of Microbial Transformation of Phytosterols

Microbial transformation of hydrophobic phytosterols into the pharmaceutical steroid precursors AD (androst-4-ene-3, 17-dione) and ADD (androst-4-diene-3, 17-dione) in a water–plant oil two-phase system by Mycolicibacterium neoaurum is a paradigm of interfacial biocatalysis in Pickering emulsions stabilized by bacterial cells. In the present work, phase inversion of Pickering emulsions—i.e., Pickering emulsions turning from water-in-oil (W/O) emulsions into oil-in-water (O/W) ones—was observed during microbial transformation in the presence of high concentrations of crystal phytosterols. It was found that there is a correlation relationship between the phase behaviors of Pickering emulsions and the biocatalytic activity of utilizing M. neoaurum as a whole-cell catalyst. Efficient microbial transformation under the high crystal phytosterol loadings was achieved due to the formation of O/W emulsions where interfacial biocatalysis took place. Under the optimal conditions (volume ratio of soybean oil to water: 15:35 mL, phytosterols concentration in the soybean oil: 80 g/L, glucose as co-substrate in the aqueous culture medium: 10 g/L), the concentrations of AD and ADD reached 4.8 g/L based on the whole broth (16 g/L based on the oil phase) after microbial transformation for 9 days.

Nano- and microparticle-stabilized Pickering emulsions designed for topical therapeutics and cosmetic applications

Pickering emulsions are systems composed of two immiscible fluids, which are stabilized by solid organic or inorganic particles. These solid particles include a broad range of particles that can be used to stabilize Pickering emulsions. An improved resistance against coalescence and lower toxicity, against conventional emulsions stabilized by surfactants, make Pickering emulsions suitable candidates for numerous applications, such as catalysis, food, oil recovery, cosmetics, and pharmaceutical industries. In this article, we give an overview of Pickering emulsions focusing on topical applications. First, we reference the parameters that influence the stabilization of Pickering emulsions. Second, we discuss some of the already investigated topical applications of nano- and microparticles used to stabilize Pickering emulsions. Afterwards, we consider some of the most promising stabilizers of Pickering emulsions for topical applications. Ultimately, we carried out a brief analysis of toxicity and advances in future perspectives, highlighting the promising use of these emulsions in cosmetics and dermopharmaceutical formulations.

Effect of cetyltrimethyl-ammonium bromide on the properties of hydroxyapatite nanoparticles stabilized Pickering emulsion and its cured poly(L-lactic acid) materials

Hydroxyapatite (HAp) nanoparticles stabilized Pickering emulsions were prepared by dichloromethane (CH₂ Cl₂ ) dissolved poly(L-lactic acid) (PLLA) as the oil phase and the deionized water with different concentrations of cetyltrimethyl-ammonium bromide (CTAB) as the aqueous phase. Effect of CTAB concentration on emulsions type and stability were studied. The emulsion type underwent a two-phase inversion, and emulsion stability increased first and then decreased with increasing CTAB concentrations. Besides, effect of CTAB concentration on zeta potential, aggregate size, contact angle of HAp nanoparticles and the oil-water interfacial tension were studied. The results indicated that zeta potential value of HAp nanoparticles changed from negative to positive, and the contact angle increased to over 80° initially and then decreased to below 40° rapidly. The distribution of HAp nanoparticles on the surface of emulsion droplets with different concentrations of CTAB (5 and 20 mM) was characterized using laser-induced confocal microscope. It revealed the distribution of HAp nanoparticles changed with different CTAB concentrations. The cured PLLA materials were obtained after the solvent being volatilized using as-received emulsions as templates. Scanning electron microscope images showed both microspheres and porous materials with interconnected pore structure were obtained. In conclusion, the microstructure of microspheres or porous PLLA materials is controllable by adjusting the property of HAp nanoparticles stabilized Pickering emulsions with appropriate amount of CTAB.

Dual Stimuli-Responsive Pickering Emulsions from Novel Magnetic Hydroxyapatite Nanoparticles and Their Characterization Using a Microfluidic Platform

Stimuli-responsive emulsifiers have emerged as a class of smart agents that can permit regulated stabilization and destabilization of emulsions, which is essential for food, cosmetic, pharmaceutical, and petroleum industries. Here, we report the synthesis of novel "smart" hydroxyapatite (HaP) magnetic nanoparticles and their corresponding stimuli-responsive Pickering emulsions and explore their movement under confined spaces using a microfluidic platform. Pickering emulsions prepared with our magnetic stearic acid-functionalized Fe₂O₃@HaP nanoparticles exhibited pronounced pH-responsive behavior. We observed that the diameter of emulsion droplets decreases with an increase in pH. Swift demulsification was achieved by lowering the pH, whereas the reformation of emulsions was achieved by increasing the pH; this emulsification-demulsification cycling was successful for at least ten cycles. We used a microfluidic platform to test the stability of the emulsions under flowing conditions and their response to a magnetic field. We observed that the emulsion stability was diminished and droplet coalescence was enhanced by the application of the magnetic field. The smart nanoparticles we developed and their HaP-based emulsions present promising materials for pharmaceutical and petroleum industries, where responsive emulsions with controlled stabilities are required.

A novel multifunctional NCQDs-based injectable self-crosslinking and in situ forming hydrogel as an innovative stimuli responsive smart drug delivery system for cancer therapy

In this work, we offer an easy approach to develop a novel injectable, pH sensitive and in situ smart drug delivery system for use in cancer treatments. The developed hydrogels containing nitrogen doped carbon quantum dots (NCQD), doxorubicin (Dox) and hydroxyapatite (HA) were obtained by in situ self-crosslinking. Characterization of the synthesized nanomaterials, interactions between NCQD/Dox/HA hydrogel structure were carried out by TEM, FESEM, EDS, FTIR, XPS, XRD, Zeta potential, DLS, UV-Vis, SEM, gelation time, injectability and DIST measurements. In addition, antibacterial evaluation which was performed against Staphylococcus aureus realized that HA compound significantly increased the antibacterial activity of the hybrid hydrogel. The anticancer drug release to the tumor cell microenvironment with a pH of 5.5 was found to be higher compared to the release in the normal physiological range of pH 6.5 and 7.4. MTT and live/dead assays were also performed using L929 fibroblastic cell lines to investigate the cytotoxic behavior of NCQDs, and NCQDs/Dox/HA hydrogels. Furthermore, the NCQDs/Dox/HA hydrogel could transport Dox within a MCF-7 cancerous cell at specifically acidic pH. Additionally, imaging of cell line was observed using NCQDs and their use in imaging applications and multicolor features in the living cell system were evaluated. The overall study showed that in situ formed NCQDs/Dox/HA hydrogel represented a novel and multifunctional smart injectable controlled-release drug delivery system with great potential, which may be considered as an attractive minimal invasive smart material for future intelligent delivery of chemotherapeutic drug and disease therapy applications.

Food-Grade Pickering Emulsions: Preparation, Stabilization and Applications

In recent years, Pickering emulsions have emerged as a new method and have attracted much attention in the fields of food sciences. Unlike conventional emulsions, Pickering emulsions are stabilized by solid particles, which can irreversibly adsorb on the oil-water interface to form a dense film to prevent the aggregation of droplets. The research and development of food-grade solid particles are increasingly favored by scientific researchers. Compared with conventional emulsions, Pickering emulsions have many advantages, such as fewer using amounts of emulsifiers, biocompatibility and higher safety, which may offer feasibility to have broad application prospects in a wide range of fields. In this article, we review the preparation methods, stabilization mechanism, degradation of Pickering emulsions. We also summarize its applications in food sciences in recent years and discuss its future prospects and challenges in this work.

Polyglutamic acid-coordinated assembly of hydroxyapatite nanoparticles for synergistic tumor-specific therapy

Nanotechnology offers exciting and innovative therapeutic strategies in the fight against cancer. Nano-scale hydroxyapatite, the inorganic constituent of the hard tissues of humans and animals, is not only an ideal carrier for the delivery of drugs but also exerts selective inhibitory effects on tumor cells. To perform the dual functions, we propose polyglutamic acid-coordinated hydroxyapatite nanoparticles (HA-PGA NP) as both DOX delivery vehicle and sustained calcium flow supplier to achieve a synergistic, tumor-specific therapy in this study. With PGA as the coordinator, the HA-PGA NPs were easily assembled into spherical nano-clusters with low crystallinity. The excellent dispersibility and solubility in the tumor environment endowed the HA-PGA NPs with an improved internalization into the tumor cells, thereby causing a dramatic elevation in the intracellular calcium influx by about 40%, which further induced a cascade of mitochondrial membrane damage, ATP content reduction, and reinforced sensitivity to chemotherapy. After the encapsulation of the model drug DOX, a pH-responsive release profile was achieved via the degradation of the nanoparticles and the deprotonation of PGA in the acidic tumor micro-environment. Consequently, the hybrid system, with the synergistic effects of sustained DOX and calcium overload, exhibited selectively intensified toxicity to tumor cells. The in vivo test further confirmed that the current system exhibited highly selective tumor inhibition and reduced heart toxicity, thus representing an effective anti-tumor platform.