Perylene bisimide with diphenylacrylonitrile on side-chain: strongly fluorescent liquid crystal with large pseudo Stokes shift based on AIE and FRET effect

The Schiff Base Probe With J-aggregation Induced Emission for Selective Detection of Cu2

Here, three Schiff bases 3a-c, differing by the substitutions (-H, -Cl, and -N(CH₃)₂) on the phenyl ring, have been designed and synthesized via the reaction of ortho-aminophenol with benzaldehyde, 2,4-dichlorobenzaldehyde and para-dimethylamine benzaldehyde in 1:1 molar ratio with favourable yields of 89-92%, respectively. Their structural characterizations were studied by FT-IR, NMR, MALDI-MS and elemental analysis. The fluorescence behaviours of compounds 3a and 3b exhibited a severe aggregation caused quenching (ACQ) effect in EtOH/water system. On the contrary, compound 3c had an obvious J-aggregation induced emission (AIE) feature in EtOH/water mixture (v/v = 1:1), and exhibited excellent sensitivity and anti-interference towards Cu²⁺ with the limit of detection (LOD) of 1.35 × 10^-8 M. Job's plot analysis and MS spectroscopic study revealed the 2:1 complexation of probe 3c and Cu²⁺. In addition, probe 3c was successfully applied to the determination of Cu²⁺ in real aqueous samples.

Chiral diphenylacrylonitrile–perylene liquid crystal with circularly polarized luminescence in the aggregated state

Novel chiral diphenylacrylonitrile–perylene liquid crystal with excellent CPL propertyin aggregated state was reported.

Achieving Molecular Fluorescent Conversion from Aggregation-Caused Quenching to Aggregation-Induced Emission by Positional Isomerization

In this work, we synthesized a pair of positional isomers by attaching a small electron-donating pyrrolidinyl group at ortho- and para-positions of a conjugated core. These isomers exhibited totally different fluorescent properties. PDB2 exhibited obvious aggregation-induced emission properties. In contrast, PDB4 showed the traditional aggregation-caused quenching effect. Their different fluorescent properties were investigated by absorption spectroscopy, fluorescence spectroscopy, density functional theory calculations and single-crystal structural analysis. These results indicated that the substituent position of the pyrrolidinyl groups affects the twisted degree of the isomers, which further induces different molecular packing modes, thus resulting in different fluorescent properties of these two isomers. This molecular design concept provided a new accurate strategy for designing new aggregation-induced emission luminogens.

Perylene Bisimide-Based Luminescent Liquid Crystals with Tunable Solid-State Light Emission

Perylene bisimides are among the most studied building blocks for supramolecular assemblies in the fabrication of optoelectronic devices for their exceptional optical and electronic properties; however, developing perylene bisimide-based luminescent liquid crystals remains a challenge for the strong π-stacking tendency of the large planar aromatic core to quench the emission. We here reported a novel strategy to achieve luminescent liquid crystals based on perylene bisimides by introducing a conformation-adjustable core to control the molecular stacking arrangement of planar perylene bisimides in the solid state. The emission wavelength is in the deep-red region with a luminescence efficiency of up to 10%. Fluorescence properties of the liquid crystals can be further regulated by photoisomerization-induced structural evolution from columnar to lamellar mesophases. These luminescent liquid crystals are also able to not only exhibit strong emission at high temperatures but also show attractive thermochromic luminescence tuning behaviors. This work provides a new strategy for the design and development of novel solid-state luminescent materials with potential for various optoelectronic applications.

Fluorescein-bridged Perylene Bisimide Dimer for Use as Liquid Crystal: Studies on Mesomorphic and Fluorescence Properties

A novel fluorescein-bridged perylene bisimide (PBI) dimer for liquid crystal (LC) with geometrically symmetric structure was developed. The mesomorphic results indicated that the energetically stable and unstable conformers of fluorescein fragments could lead to the transformation of mesophases from a hexagonal columnar mesophase to an uncertain phase at 136.9 °C in heating, whilst a stable hexagonal columnar mesophase maintained between 175.6 °C and 58.6 °C in cooling. The selectively excited fluorescence characters in THF solution demonstrated that the fluorescence resonance energy transfer (FRET) effect between fluorescein fragments and PBI unites could provide a means to effectively impose strong fluorescence of the dimeric PBIs modified with suitable chromophore at the N-imide position, which alternatively serves as a platform for the further study of multi-functional PBI-based LCs.

A Versatile Aggregation-induced Emission Fluorescent Probe for Visible Detection of pH

By tactfully structuring a luminescent molecule as an accurate pH probe with aggregation-induced emission (AIE) feature, it is significant to overcome aggregation-caused quenching of emitted light in practice. Herein, we present a simple AIE-active fluorescence probe for pH detection on the basis of intramolecular charge transfer (ICT) with wide response range and high sensitivity reaction. The donor-acceptor-donor (D-A-D) style probe utilized a conjugated structural hybrid of the electron-withdrawing nitrile group and electron-donating hydroxyl as well as dimethylamino groups for fluorescent platform. The AIE-active probe possesses good fluorescence under water fraction up to 90% in mixed MeOH/water system. Furthermore, it can be used in profiling and visualization of pH detection in MeOH/water system at f_w = 90% under UV 365 nm lamp. What's more, the probe can be employed to be a broad range test paper of pH detection, paving the way for low-cost practical applications.

Room-temperature AIE ionic liquid crystals based on diphenylacrylonitrile-imidazole salts

Although various AIE liquid crystals have been studied, AIE ionic liquid crystals (ILCs) are almost unknown to date. In this work, a series of novel AIE ILCs based on diphenylacrylonitrile-imidazole salts bridged by soft spacers with different anions were prepared in yields of 63-80%. The mesomorphic, photophysical and electrochemical properties were investigated systematically to elucidate the relationship between structures and properties. The results implied that they were the first room-temperature AIE ILCs with wide ranges of mesomorphic temperature, good fluorescence emission in both the solid state and mesophase, and stable electrochemical behaviour. The samples with one alkyl chain possessed the SmA₂ mesophase while the samples with two alkyl chains prefered the Col_h mesophase. The larger anions resulted in the bigger layer spacing length for the SmA₂ mesophase and smaller values of n_cell in each slice of Col_h mesophase. The fluorescence quantum yields in the mesophase maintained reasonable values (0.15-0.22), which decreased a little in comparison with that in solid films (0.18-0.26) due to the orderly molecular stacking in the mesophase. The cyclic voltammetry experiments confirmed that all of them possessed similar and stable electrochemical behaviour. This research not only presented the first room-temperature AIE ILCs with excellent mesomorphic, photophysical and electrochemical properties, but also elucidated the relationship between structures and properties to a certain degree, contributing to the further construction of novel AIE ILCs with excellent mesomorphic, photophysical and electrochemical properties.

Organic Acid Regulated Self-Assembly and Photophysical Properties of Perylene Bisimide Derivatives

In this work, perylene bisimide derivatives (PBI-1 and PBI-2) with tertiary amine groups were designed and synthesized. To control the final morphologies and properties of their aggregates, seven kinds of organic acids were used to alter the self-assembly environment. The influence of organic acids on the morphology of the aggregates was investigated. Photophysical properties of the aggregates were markedly affected by the kind and concentration of the organic acid. The thermal and gas sensitivities of the PBI-1 aggregates were studied with the use of UV-visible spectroscopy and digital imaging. The shift of the UV-visible spectra varied with time, temperature, acid type and acid concentration. Furthermore, PBI-1 aggregates showed a red-to-blue color change after addition of seven organic acids, whereas the color of the PBI-2 aggregates remained red. These changes of morphologies, photophysical properties and their thermal and gas sensitivities make these aggregates potentially useful in the fields of optoelectronics or sensors.

A first porphyrin liquid crystal with strong fluorescence in both solution and aggregated states based on the AIE-FRET effect

Porphyrins are good near-infrared fluorescent materials, but the strong self-assembly stacking resulted in the aggregation-caused quenching (ACQ) effect, limiting their emissive performance in aggregated states. In this work, a novel diphenylacrylonitrile-porphyrin derivative with multiple polyglycol chains on the periphery was designed and synthesized as an excellent near-infrared-emissive liquid crystalline material in both solution and aggregated states, which was first observed for porphyrin liquid crystals. It exhibited a high self-assembly ability with the ordered hexagonal columnar mesophase between 70 and 120 °C approximately. The strong AIE-FRET effect was produced based on the overlap of the emission wavelength of diphenylacrylonitrile and the absorption wavelength of the porphyrin, resulting in the excellent near-infrared emission in both solution and aggregated states. The pseudo Stokes shift was as large as 210 nm and the fluorescence quantum yield reached 0.12 in the solid state. Moreover, this porphyrin liquid crystal displayed low biotoxicity and excellent fluorescence bio-imaging ability in living cells, opening a new application prospect for porphyrin liquid crystalline materials.