An aggregation induced emission active bis-heteroleptic ruthenium(II) complex for luminescence light-up detection of pyrophosphate ions

A red emissive ruthenium(II) complex 1[PF6]2 of an amino ethanol substituted 1,10-phenanthroline-based ligand (L1) has been developed and characterized by spectroscopic analysis and single-crystal X-ray diffraction. Complex 1 shows an aggregation-induced emission (AIE) enhancement and forms nano-aggregates in the poor solvent water and highly dense polyethylene glycol (PEG) media. The possible reason behind the AIE properties may be the rigidity gained through weak supramolecular interactions between neighbouring phenanthroline ligands and PF₆^- counterions. The AIE properties were supported by UV-vis and photoluminescence (PL) spectroscopy and dynamic light scattering (DLS) studies to substantiate the formation of nano-aggregates and to understand the morphology of the aggregated particles, scanning electron microscopy (SEM) and transmission electron microscopy (TEM) studies were performed. Compound 1[PF6]2 was highly selective towards pyrophosphate ions (PPi) over other phosphates such as ATP, ADP, AMP and H₂PO₄^- ions and other competitive anions in the PL spectroscopic channel in acetonitrile. The PL titrations of 1[PF6]2 with PPi in CH₃CN furnished the association constant K_a = 1.08 × 10⁴ M^-1 and the detection limit was calculated as low as 1.54 μM. The PPi detection has been established through the unique H-bonding interaction, supported by ¹H NMR titration. Finally, the cytotoxicity study and bioimaging were carried out for biological application. The complex shows very low cytotoxicity and good biocompatibility and is suitable for intracellular PPi imaging.

Advances in Ultra-small Fluorescence Nanoprobes for Detection of Metal Ions, Drugs, Pesticides and Biomarkers

Identification of trace level chemical species (drugs, pesticides, metal ions and biomarkers) plays key role in environmental monitoring. Recently, fluorescence assay has shown significant advances in detecting of trace level drugs, pesticides, metal ions and biomarkers in real samples. Ultra-small nanostructure materials (metal nanoclusters (NCs), quantum dots (QDs) and carbon dots (CDs)) have been integrated with fluorescence spectrometer for sensitive and selective analysis of trace level target analytes in various samples including environmental and biological samples. This review summarizes the properties of metal NCs and ligand chemistry for the fabrication of metal NCs. We also briefly summarized the synthetic routes for the preparation of QDs and CDs. Advances of ultra-small fluorescent nanosensors (NCs, QDs and CDs) for sensing of metal ions, drugs, pesticides and biomarkers in various sample matrices are briefly discussed. Additionally, we discuss the recent challenges and future perspectives of ultra-small materials as fluorescent sensors for assaying of wide variety of target analytes in real samples.

Point-of-care testing for lysine concentration in swine serum via blue-emissive carbon dot-entrapped microfluidic chip

Lysine is one of the essential amino acids and plays a vital role in the growth, development and health of pigs. Blood lysine concentration is a direct indication of lysine status; however, current methods can not satisfy the demands for rapid and on-site lysine concentration measurement of swine serum. Here, we developed blue-emissive nitrogen-doped carbon dots as a fluorescence probe for the determination of lysine with high fluorescence quantum yield, stability, sensitivity and specificity. The carbon dots were entrapped within hydrogel microstructures to fabricate microfluidic chips for rapid assay for lysine quantification. We further developed an imaging attachment to integrate the microfluidic chip and a smartphone into a portable point-of-care testing platform. This platform requires only 3 μL sample and has a linear detection range of 25 to 300 μmol/L with a limit of detection less than 16 μmol/L, which covers the normal range of lysine concentration in swine serum. We tested lysine concentration in swine serum using this platform with high accuracy, low sample consumption, and within 3 min. Together, these results may provide a rapid and portable platform for dynamic monitoring of swine lysine status and contribute to precise feed formula modulation with low-protein diet strategy.

Photothermally responsive chitosan-coated iron oxide nanoparticles for enhanced eradication of bacterial biofilms

This work developed a pH/NIR responsive antibacterial agent (CS-FeNPs) composed of chitosan (CS) and Fe₃O₄ nanoparticles (FeNPs). CS triggers bacterial attraction through surface charge, while Fe acts as a photothermal agent (PTA). The CS-Fe NPs exhibited antibacterial and antibiofilm activity against both bacteria (G+/G-). However, higher activity was observed against bacteria (G-) due to electrostatic interactions. The CS-FeNPs bind with the bacterial membrane through electrostatic interactions and disturb bacterial cells. Later, in an acidic environment, CS-FeNPs bind with bacterial membrane, and NIR irradiation leads the antibacterial activity. CS-FeNPs exhibited a potential photothermal conversion efficiency (η) of 21.53 %. Thus, it converts NIR irradiation into heat to kill the bacterial pathogen. The CS-FeNPs were found to be less cytotoxic with great antibacterial efficiency on planktonic bacteria and their biofilm, which indicates that they deserve to develop potential and safe treatment strategies for the treatment of bacterial infections.

Plasmonic Oxygen Defects in MO3- x (M = W or Mo) Nanomaterials: Synthesis, Modifications, and Biomedical Applications

Nanomedicine is a promising technology with many advantages and provides exciting opportunities for cancer diagnosis and therapy. During recent years, the newly developed oxygen-deficiency transition metal oxides MO_{3- x} (M = W or Mo) have received significant attention due to the unique optical properties, such as strong localized surface plasmon resonance (LSPR) , tunable and broad near-IR absorption, high photothermal conversion efficiency, and large X-ray attenuation coefficient. This review presents an overview of recent advances in the development of MO_{3- x} nanomaterials for biomedical applications. First, the fundamentals of the LSPR effect are introduced. Then, the preparation and modification methods of MO_{3- x} nanomaterials are summarized. In addition, the biological effects of MO_{3- x} nanomaterials are highlighted and their applications in the biomedical field are outlined. This includes imaging modalities, cancer treatment, and antibacterial capability. Finally, the prospects and challenges of MO_{3- x} and MO_{3- x} -based nanomaterial for fundamental studies and clinical applications are also discussed.

Advanced Strategies to Improve Performances of Molybdenum-Based Gas Sensors

Molybdenum-based materials have been intensively investigated for high-performance gas sensor applications. Particularly, molybdenum oxides and dichalcogenides nanostructures have been widely examined due to their tunable structural and physicochemical properties that meet sensor requirements. These materials have good durability, are naturally abundant, low cost, and have facile preparation, allowing scalable fabrication to fulfill the growing demand of susceptible sensor devices. Significant advances have been made in recent decades to design and fabricate various molybdenum oxides- and dichalcogenides-based sensing materials, though it is still challenging to achieve high performances. Therefore, many experimental and theoretical investigations have been devoted to exploring suitable approaches which can significantly enhance their gas sensing properties. This review comprehensively examines recent advanced strategies to improve the nanostructured molybdenum-based material performance for detecting harmful pollutants, dangerous gases, or even exhaled breath monitoring. The summary and future challenges to advance their gas sensing performances will also be presented.

Portable, quantitative, and sequential monitoring of copper ions and pyrophosphate based on a DNAzyme-Fe3O4 nanosystem and glucometer readout

In this report, portable, quantitative, and sequential monitoring of copper ions and pyrophosphate (PPi) with a single sensor based on a DNAzyme-Fe₃O₄ system and glucometer readout was performed. Initially, streptavidin was functionalized on the surface of magnetic Fe₃O₄ spheres through glutaraldehyde. Then, an invertase-modified DNA Cu substrate was connected to the magnetic Fe₃O₄ spheres by a specific reaction between streptavidin and biotin. The sensing system was formed by a hybridization reaction between the Cu substrate and Cu enzyme. In the presence of Cu²⁺, Cu²⁺ will recognize the Cu DNA substrate and form an “off-on” signal switch, thereby resulting in the separation of invertase from the Fe₃O₄ nanospheres. PPi recognizes Cu²⁺ to form a Cu²⁺-PPi complex, resulting in an “on-off” signal switch. Under optimized conditions, linear detection ranges for Cu²⁺ and PPi of 0.01–5 and 0.5–10 μM, and detection limits for Cu²⁺ and PPi of 10 nM and 500 nM, respectively, were obtained. Good selectivity was achieved for the analysis of Cu²⁺ and PPi. Satisfactory results were achieved for this biosensor during the determination of Cu²⁺ in real tap samples and PPi in human urine samples. This verified that the sensor is portable and low cost, and can be applied to the sequential monitoring of multiple analytes with a single point-of-care biosensor.

Highly sensitive fluorescent sensor based on coumarin organic dye for pyrophosphate ion turn-on biosensing in synovial fluid

Highly sensitive fluorescence detection of pyrophosphate ion (PPi) is in urgent demand but remains a great obstacle, ascribing to scarcity of high-performance materials with promising optical property and high affinity. Herein, we report the design and fabrication of a coumarin-based organic dye (DCCH-TPD) containing both hydrazide group and terpyridine moiety for PPi biosensing through Cu²⁺-induced photo-electron transfer (PET) effect and target analyte-switched competitive coordination reaction. Individual DCCH-TPD was found to be highly emissive, and displayed a turn-off response toward Cu²⁺ due to formation of Cu²⁺@DCCH-TPD and PET effect. The recognition of Cu²⁺@DCCH-TPD by PPi leads to generation of Cu²⁺@PPi complex, which greatly reduces the amount of Cu²⁺ coordinated with DCCH-TPD, subsequently decreasing PET effect. Significantly enhanced fluorescence is recorded and the fluorescence intensity is closely relied on PPi concentration. Thus, highly sensitive detection of PPi is achieved, and the detection limit was calculated to be 0.075 μM. Furthermore, the proposed sensor presented good selectivity, and excellent practical ability for application in arthritic fluid.

Near-Infrared Regulated Nanozymatic/Photothermal/Photodynamic Triple-Therapy for Combating Multidrug-Resistant Bacterial Infections via Oxygen-Vacancy Molybdenum Trioxide Nanodots

Bacterial infections have become a major danger to public health because of the appearance of the antibiotic resistance. The synergistic combination of multiple therapies should be more effective compared with the respective one alone, but has been rarely demonstrated in combating bacterial infections till now. Herein, oxygen-vacancy molybdenum trioxide nanodots (MoO_3-x NDs) are proposed as an efficient and safe bacteriostatic. The MoO_3-x NDs alone possess triple-therapy synergistic efficiency based on the single near-infrared irradiation (808 nm) regulated combination of photodynamic, photothermal, and peroxidase-like enzymatic activities. Therein, photodynamic and photothermal therapies can be both achieved under the excitation of a single wavelength light source (808 nm). Both the photodynamic and nanozyme activity can result in the generation of reactive oxygen species (ROS) to reach the broad-spectrum sterilization. Interestingly, the photothermal effect can regulate the MoO_3-x NDs to their optimum enzymatic temperature (50 °C) to give sufficient ROS generation in low concentration of H₂ O₂ (100 µm). The MoO_3-x NDs show excellent antibacterial efficiency against drug-resistance extended spectrum β-lactamases producing Escherichia coli and methicillin-resistant Staphylococcus aureus (MRSA). Animal experiments further indicate that the MoO_3-x NDs can effectively treat wounds infected with MRSA in living systems.

Facile and rapid synthesis of emission color-tunable molybdenum oxide quantum dots as a versatile probe for fluorescence imaging and environmental monitoring

Recent years have seen molybdenum oxide quantum dots (MoOx QDs) as a booming material due to their attractive physical and chemical properties. However, there is still a large demand for MoOx QDs with long-wavelength emission by a facile strategy but these are more challenging to obtain. Herein, we rationally designed and successfully prepared nitrogen and phosphorus co-doped green emitting MoOx QDs (N,P-MoOx QDs) through a microwave-assisted rapid method. They exhibit a maximum emission at 500 nm under a 430 nm excitation. Moreover, by controlling their sizes in the process, we find that such a strategy enables the tuning of the emission color of N,P-MoOx QDs from green to blue. N,P-MoOx QDs show a significant fluorescence response to pH changes, and also display pH-sensitive near-infrared localized surface plasmon resonance (LSPR) at 866 nm. An effective and simple pH probe with a dual-signal response is achieved using N,P-MoOx QDs. As environmental sensors, N,P-MoOx QDs can be applied for sensitive detection of the concentrations of permanganate and captopril, offering the linear range from 0.08 to 25 μM and 0.1 to 31 μM, respectively. Benefitting from the effect of doping nitrogen and phosphorus, the probe could detect a wide range of pH changes (2-9) and is endowed with superior biocompatibility. Further, it is successfully used to "see" the intracellular pH variation by fluorescence confocal imaging. These findings not only demonstrate the achievement of a promising multifunctional probe for biosensing and environmental detection, but also pave the way for the fabrication of transition metal oxide QDs with tunable optical properties.

Photo-induced synthesis of molybdenum oxide quantum dots for surface-enhanced Raman scattering and photothermal therapy

By means of a simple and photo-induced method, four colors of molybdenum oxide quantum dots (MoO_x QDs) have been synthesized, using Mo(CO)₆ as the structural guiding agent and molybdenum source. The as-prepared MoO_x QDs display diverse optical properties due to the different configurations of oxygen vacancies in various nanostructures. Among them, crystalline molybdenum dioxide (MoO₂) with a deep blue color shows the most intense localized surface plasmon resonance effect in the near-infrared (NIR) region. The strong NIR absorption endows MoO₂ QDs with a high photothermal conversion efficiency of 66.3%, enabling broad prospects as a photo-responsive nanoagent for photothermal therapy of cancer. Moreover, MoO₂ QDs can also serve as a novel semiconductor substrate for ultrasensitive surface-enhanced Raman scattering (SERS) analysis of aromatic molecules, amino acids and antibiotics, with SERS performance comparable to that of noble metal-based substrates. The therapeutic applications of MoO₂ QDs open up a new avenue for tumor nanomedicine.

Modified top-down approach for synthesis of molybdenum oxide quantum dots: sonication induced chemical etching of thin films

A simple and modified top-down approach to synthesize molybdenum oxide (MoO_x: x = 2, 3) quantum dots (QDs) is proposed in this study. This modified approach involves the conversion of a bulk powder material into thin films followed by a sonication induced chemical etching process for synthesising QDs. X-Ray Diffraction (XRD) is used for crystal structural characterization of MoO_x thin films. The crystal structure properties of the MoO_x QDs are analysed by High Resolution Transmission Electron Microscopy (HRTEM) images and corresponding Selected Area Electron Diffraction (SAED) patterns. The optical band gap is estimated by Tauc's plot from UV-Vis-NIR absorption spectra. The excitation dependent photoluminescence (PL) emission of MoO_x QDs as a function of acid concentration is investigated. The growth mechanism of QDs in different crystalline phases as a function of acid concentration is also exemplified in this work. The micro-Raman and Fourier Transform of Infrared (FTIR) spectra are recorded to analyse the vibrational spectrum of the molybdenum–oxygen (Mo–O) bonds in the MoO_x QDs.

A simple and modified top-down approach to synthesize molybdenum oxide (MoO_x: x = 2, 3) quantum dots (QDs) is proposed in this study.

Construction of Single-Iron-Atom Nanocatalysts for Highly Efficient Catalytic Antibiotics

Bacterial infection caused by pathogenic bacteria has long been an intractable issue that threatens human health. Herein, the fact that nanocatalysts with single iron atoms anchored in nitrogen-doped amorphous carbon (SAF NCs) can effectively induce peroxidase-like activities in the presence of H₂ O₂ , generating abundant hydroxyl radicals for highly effective bacterial elimination (e.g., Escherichia coli and Staphylococcus aureus), is reported. In combination with the intrinsic photothermal performance of the nanocatalysts, noticeable bacterial-killing effects are extensively investigated. Especially, the antibacterial mechanism of critical cell membrane destruction induced by SAF NCs is unveiled. Based on the bactericidal properties of SAF NCs, in vivo bacterial infections propagated at wounds by E. coli and S. aureus pathogens can be effectively eradicated, resulting in better wound healing. Collectively, the present study highlights the highly efficient in vitro antibacterial and in vivo anti-infection performances by the single-iron-atom-containing nanocatalysts.

A rational strategy to develop a boron nitride quantum dot-based molecular logic gate and fluorescent assay of alkaline phosphatase activity

By comparing the percentage of FL quenching and recovery of the BNQDs, a Fe³⁺-mediated FL quenching of BNQDs system was rationally designed for efficient ALP assay. Moreover, the aforementioned ensemble was exploited to newly construct a 2D-QD-based INH logic gate.

A dual-responsive luminescent metal–organic framework as a recyclable luminescent probe for the highly effective detection of pyrophosphate and nitrofurantoin

Luminescent ZTMOF-1 can discriminately detect PPi and NFT with high selectivity, sensitivity and stability.