Near-infrared BODIPY photosensitizers for two-photon excited singlet oxygen generation and tumor cell photodynamic therapy

In this paper, two near-infrared BODIPY photosensitizers, Id-BDPI and Cz-BDPI, were obtained by modifying the indole and carbazole aromatic heterocycles in the core of BODIPY. The maximum absorption wavelengths of Id-BDPI and Cz-BDPI were 694 nm and 722 nm, and their singlet oxygen yields were 48% and 48.4%, respectively. In the simulated tumor cell photodynamic therapy, Id-BDPI and Cz-BDPI could effectively inhibit the growth of A549 tumor cells under near-infrared light. Meanwhile, the lysosomal co-localization coefficients of Id-BDPI and Cz-BDPI with A549 tumor cells were 0.94 and 0.89, respectively, showing high lysosomal targeting ability and biocompatibility. The two-photon absorption cross sections measured at 1050 nm by the Z-scanning method were 661.8 GM and 715.6 GM, respectively, and Cz-BDPI was further successfully applied to two-photon fluorescence imaging and two-photon excited singlet oxygen generation in zebrafish. The above results indicate that the introduction of aromatic heterocycles can effectively enhance the photodynamic efficacy of BODIPY photosensitizers, and the larger two-photon absorption cross section also brings potential for two-photon photodynamic therapy applications.

Fluorinated Organic Polymers for Cancer Drug Delivery

In the realm of cancer therapy, the spotlight is on nanoscale pharmaceutical delivery systems, especially polymer-based nanoparticles, for their enhanced drug dissolution, extended presence in the bloodstream, and precision targeting achieved via surface engineering. Leveraging the amplified permeation and retention phenomenon, these systems concentrate therapeutic agents within tumor tissues. Nonetheless, the hurdles of systemic toxicity, biological barriers, and compatibility with living systems persist. Fluorinated polymers, distinguished by their chemical idiosyncrasies, are poised for extensive biomedical applications, notably in stabilizing drug metabolism, augmenting lipophilicity, and optimizing bioavailability. Material science heralds the advent of fluorinated polymers that, by integrating fluorine atoms, unveil a suite of drug delivery merits: the hydrophobic traits of fluorinated alkyl chains ward off lipid or protein disruption, the carbon-fluorine bond's stability extends the drug's lifecycle in the system, and a lower alkalinity coupled with a diminished ionic charge bolsters the drug's ability to traverse cellular membranes. This comprehensive review delves into the utilization of fluorinated polymers for oncological pharmacotherapy, elucidating their molecular architecture, synthetic pathways, and functional attributes, alongside an exploration of their empirical strengths and the quandaries they encounter in both experimental and clinical settings.

Fluoropolymer Nanoparticles Synthesized via Reversible-Deactivation Radical Polymerizations and Their Applications

Fluorinated polymeric nanoparticles (FPNPs) combine unique properties of fluorocarbon and polymeric nanoparticles, which has stimulated massive interest for decades. However, fluoropolymers are not readily available from nature, resulting in synthetic developments to obtain FPNPs via free radical polymerizations. Recently, while increasing cutting-edge directions demand tailored FPNPs, such materials have been difficult to access via conventional approaches. Reversible-deactivation radical polymerizations (RDRPs) are powerful methods to afford well-defined polymers. Researchers have applied RDRPs to the fabrication of FPNPs, enabling the construction of particles with improved complexity in terms of structure, composition, morphology, and functionality. Related examples can be classified into three categories. First, well-defined fluoropolymers synthesized via RDRPs have been utilized as precursors to form FPNPs through self-folding and solution self-assembly. Second, thermally and photoinitiated RDRPs have been explored to realize in situ preparations of FPNPs with varied morphologies via polymerization-induced self-assembly and cross-linking copolymerization. Third, grafting from inorganic nanoparticles has been investigated based on RDRPs. Importantly, those advancements have promoted studies toward promising applications, including magnetic resonance imaging, biomedical delivery, energy storage, adsorption of perfluorinated alkyl substances, photosensitizers, and so on. This Review should present useful knowledge to researchers in polymer science and nanomaterials and inspire innovative ideas for the synthesis and applications of FPNPs.

Perfluorocarbon Nanoemulsions with Fluorous Chlorin-Type Photosensitizers for Antitumor Photodynamic Therapy in Hypoxia

The efficacy of photodynamic therapy (PDT) strictly depends on the availability of molecular oxygen to trigger the light-induced generation of reactive species. Fluorocarbons have an increased ability to dissolve oxygen and are attractive tools for gas delivery. We synthesized three fluorous derivatives of chlorin with peripheral polyfluoroalkyl substituents. These compounds were used as precursors for preparing nanoemulsions with perfluorodecalin as an oxygen depot. Therefore, our formulations contained hydrophobic photosensitizers capable of absorbing monochromatic light in the long wavelength region and the oxygen carrier. These modifications did not alter the photosensitizing characteristics of chlorin such as the generation of singlet oxygen, the major cytocidal species in PDT. Emulsions readily entered HCT116 colon carcinoma cells and accumulated largely in mitochondria. Illumination of cells loaded with emulsions rapidly caused peroxidation of lipids and the loss of the plasma membrane integrity (photonecrosis). Most importantly, in PDT settings, emulsions potently sensitized cells cultured under prolonged (8 weeks) hypoxia as well as cells after oxygen depletion with sodium sulfite (acute hypoxia). The photodamaging potency of emulsions in hypoxia was significantly more pronounced compared to emulsion-free counterparts. Considering a negligible dark cytotoxicity, our materials emerge as efficient and biocompatible instruments for PDT-assisted eradication of hypoxic cells.

Wavelength engineerable porous organic polymer photosensitizers with protonation triggered ROS generation

Engineering excitation wavelength of photosensitizers (PSs) for enhanced reactive oxygen species (ROS) generation has inspired new windows for opportunities, enabling investigation of previously impracticable biomedical and photocatalytic applications. However, controlling the wavelength corresponding to operating conditions remains challenging while maintaining high ROS generation. To address this challenge, we implement a wavelength-engineerable imidazolium-based porous organic photocatalytic ROS generation system (KUP system) via a cost-effective one-pot reaction. Remarkably, the optimal wavelength for maximum performance can be tuned by modifying the linker, generating ROS despite the absence of metal ions and covalently attached heavy atoms. We demonstrate that protonated polymerization exclusively enables photosensitization and closely interacts with oxygen related to the efficiency of photosensitizing. Furthermore, superior tumor eradication and biocompatibility of the KUP system were confirmed through bioassays. Overall, the results document an unprecedented polymerization method capable of engineering wavelength, providing a potential basis for designing nanoscale photosensitizers in various ROS-utilizing applications.

Anti-Hypoxia Nanoplatforms for Enhanced Photosensitizer Uptake and Photodynamic Therapy Effects in Cancer Cells

Photodynamic therapy (PDT) holds great promise in cancer eradication due to its target selectivity, non-invasiveness, and low systemic toxicity. However, due to the hypoxic nature of many native tumors, PDT is frequently limited in its therapeutic effect. Additionally, oxygen consumption during PDT may exacerbate the tumor's hypoxic condition, which stimulates tumor proliferation, metastasis, and invasion, resulting in poor treatment outcomes. Therefore, various strategies have been developed to combat hypoxia in PDT, such as oxygen carriers, reactive oxygen supplements, and the modulation of tumor microenvironments. However, most PDT-related studies are still conducted on two-dimensional (2D) cell cultures, which fail to accurately reflect tissue complexity. Thus, three-dimensional (3D) cell cultures are ideal models for drug screening, disease simulation and targeted cancer therapy, since they accurately replicate the tumor tissue architecture and microenvironment. This review summarizes recent advances in the development of strategies to overcome tumor hypoxia for enhanced PDT efficiency, with a particular focus on nanoparticle-based photosensitizer (PS) delivery systems, as well as the advantages of 3D cell cultures.

Biological Utility of Fluorinated Compounds: from Materials Design to Molecular Imaging, Therapeutics and Environmental Remediation

The applications of fluorinated molecules in bioengineering and nanotechnology are expanding rapidly with the controlled introduction of fluorine being broadly studied due to the unique properties of C-F bonds. This review will focus on the design and utility of C-F containing materials in imaging, therapeutics, and environmental applications with a central theme being the importance of controlling fluorine-fluorine interactions and understanding how such interactions impact biological behavior. Low natural abundance of fluorine is shown to provide sensitivity and background advantages for imaging and detection of a variety of diseases with ¹⁹F magnetic resonance imaging, ¹⁸F positron emission tomography and ultrasound discussed as illustrative examples. The presence of C-F bonds can also be used to tailor membrane permeability and pharmacokinetic properties of drugs and delivery agents for enhanced cell uptake and therapeutics. A key message of this review is that while the promise of C-F containing materials is significant, a subset of highly fluorinated compounds such as per- and polyfluoroalkyl substances (PFAS), have been identified as posing a potential risk to human health. The unique properties of the C-F bond and the significant potential for fluorine-fluorine interactions in PFAS structures necessitate the development of new strategies for facile and efficient environmental removal and remediation. Recent progress in the development of fluorine-containing compounds as molecular imaging and therapeutic agents will be reviewed and their design features contrasted with environmental and health risks for PFAS systems. Finally, present challenges and future directions in the exploitation of the biological aspects of fluorinated systems will be described.

Nano-photosensitizers for enhanced photodynamic therapy

Photodynamic therapy (PDT) utilizes photosensitizers (PSs) together with irradiation light of specific wavelength interacting with oxygen to generate cytotoxic reactive oxygen species (ROS), which could trigger apoptosis and/or necrosis-induced cell death in target tissues. During the past two decades, multifunctional nano-PSs employing nanotechnology and nanomedicine developed, which present not only photosensitizing properties but additionally accurate drug release abilities, efficient response to optical stimuli and hypoxia resistance. Further, nano-PSs have been developed to enhance PDT efficacy by improving the ROS yield. In addition, nano-PSs with additive or synergistic therapies are significant for both currently preclinical study and future clinical practice, given their capability of considerable higher therapeutic efficacy under safer systemic drug dosage. In this review, nano-PSs that allow precise drug delivery for efficient absorption by target cells are introduced. Nano-PSs boosting sensitivity and conversion efficiency to PDT-activating stimuli are highlighted. Nano-PSs developed to address the challenging hypoxia conditions during PDT of deep-sited tumors are summarized. Specifically, PSs capable of synergistic therapy and the emerging novel types with higher ROS yield that further enhance PDT efficacy are presented. Finally, future demands for ideal nano-PSs, emphasizing clinical translation and application are discussed.

Novel amphiphilic fluorine-containing nanocarriers for oxygen self-sufficiency "AND" GSH depletion sequentially to enhance photodynamic therapy

In order to maximize the retention of the photodynamic therapy (PDT) efficacy, while avoiding the dilemma of hypoxia and high reducing substances in tumor tissue, fluoropolymers were synthesized in a simple and effective methods. Fluorous effect with good oxygen carrying capacity was endowed by the fluorine-containing section in fluoropolymers and the perfluorodecalin (PFD) together, the reaction site with GSH was provided by the disulfide bond, which enhanced PDT efficiency through the sequential "AND" logic gate design. Two kind of fluorine-containing nanocarriers (M-Ce6 and E-Ce6) were obtained by solvent evaporation or ultrasound emulsification with PFD, respectively. In vitro, both of them showed promising high ROS generation under photoirradiation. Benefiting by cavitation effects, E-Ce6 had a more significant statistical difference in cellular uptake. Furthermore, the cells incubating with E-Ce6 hardly were noticed that the hypoxia signal appeared under hypoxia, while reducing the intracellular GSH content by more than 15%. Through the sequential "AND" logic gate design, ROS production even under hypoxia and GSH conditions of E-Ce6 was also almost 1.5 times that of Ce6 under normoxia. Enhancing effect of E-Ce6 was 13.47 times and 6.85 times, while selectivity ratio reached 5.13 times and 4.81 times compared with Ce6 and M-Ce6. The two-pronged strategy showed a high potential for delivering the Ce6 to deep inside of cancer cells and killing it in the simulated tumor by PDT. These above results demonstrated the potential of E-Ce6, as oxygen self-sufficiency and GSH depletion nanocarriers for combined enhancement of photodynamic therapy.

Applications of Fluorous Porphyrinoids: An Update†

Porphyrins and related macrocycles have been studied broadly for their applications in medicine and materials because of their tunable physicochemical, optoelectronic and magnetic properties. In this review article, we focused on the applications of fluorinated porphyrinoids and their supramolecular systems and summarized the reports published on these chromophores in the past 5-6 years. The commercially available fluorinated porphyrinoids: meso-perfluorophenylporphyrin (TPPF₂₀ ) perfluorophthalocyanine (PcF₁₆ ) and meso-perfluorophenylcorrole (CorF₁₅ ) have increased photo and oxidative stability due to the presence of fluoro groups. Because of their tunable properties and robustness toward oxidative damage these porphyrinoid-based chromophores continue to gain attention of researchers developing advanced functional materials for applications such as sensors, photonic devices, component for solar cells, biomedical imaging, theranostics and catalysts.

Perfluorocarbon nanomaterials for photodynamic therapy

Photodynamic therapy (PDT) is a treatment modality in which a photosensitizer is irradiated with light, producing reactive oxygen species, often via energy transfer with oxygen. As it is common for tumors to be hypoxic, methods to deliver photosensitizer and oxygen are desirable. One such approach is the use of perfluorocarbons, molecules in which all C-H bonds are replaced with C-F bonds, to co-deliver oxygen because of the high solubility of gases in perfluorocarbons. This review highlights the benefits and limitations of several fluorinated nanomaterial architectures for use in PDT.

Targeted and oxygen-enriched polymeric micelles for enhancing photodynamic therapy

Photodynamic therapy (PDT) has been emerged as an alternative therapeutic modality in treatment of several malignant tumors. However, the therapeutic efficacy of PDT is often limited by the solubility of photosensitizers, tumor hypoxia and lack of target specificity to cancer cells. In this study, we developed a folate-conjugated fluorinated polymeric micelle (PFFA) to deliver the hydrophobic photosensitizer (chlorin e6, Ce6) to overcome these limitations. The fluorinated micelles exhibit the low critical micelle concentration, good long-term stability, higher oxygen-carrying capacity and better singlet oxygen generation efficiency compared to non-fluorinated micelles, indicating the potential to improve the PDT efficacy in hypoxic conditions. Cytotoxicity of PDT effect and cellular uptake demonstrate the higher cell growth inhibition to HeLa cells upon irradiation attributed to the selective internalization of Ce6-loaded PFFA micelles (PFFA-Ce6). All results demonstrate the PFFA-Ce6 micelles with targeting function and oxygen-carrying capacity can serve as a promising drug delivery system for hydrophobic photosensitizers and improvement on PDT efficacy.

Fluoropolymers in biomedical applications: state-of-the-art and future perspectives

Biomedical applications of fluoropolymers in gene delivery, protein delivery, drug delivery, ¹⁹F MRI, PDT, anti-fouling, anti-bacterial, cell culture, and tissue engineering.

The main strategies for tuning BODIPY fluorophores into photosensitizers

Photodynamic therapy (PDT) is a minimally invasive technique for the treatment of target malignant tumors via the generation of highly reactive singlet oxygen species. PDT treatment of cancer/tumor tissues greatly relies on the development of suitable stable, highly specific and efficient photosensitizers. BODIPY (Boron dipyrromethene) derivatives, as a class of well-developed, versatile fluorescent dyes, has emerged as a new class of PDT agents over the past decade. Many elegant strategies have been developed to enhance the singlet oxygen generation efficiency and the cancer/tumor cell selectivity of BODIPY-based photosensitizers to improve the therapeutic outcomes as well as to minimize the side effects. Many of the currently reported BODIPY-based photosensitizers are valuable dual imaging and therapeutic agents, which can efficiently generate singlet oxygen for PDT and emit fluorescence for in vivo imaging. Although the currently approved PDT agents used for clinical trials do not feature BODIPYs, this situation is expected to change. In this review, we provide an overview of the various strategies that have been used to improve the singlet oxygen generation efficiency for tuning BODIPY fluorophores into photosensitizers and dual imaging/therapeutic agents. Their photophysical properties and photocytotoxic activity including the absorption/emission wavelengths, the singlet oxygen generation efficiency ([Formula: see text] and the half maximal inhibitory concentration [Formula: see text] of these currently reported photosensitizers are summarized. We believe these newly developed BODIPY-based photosensitizers will broaden current concepts of strategies for PDT agent design, and promise to make an important contribution to the diagnosis and therapeutics for the treatment of cancer.

Biomineralization-inspired nanozyme for single-wavelength laser activated photothermal-photodynamic synergistic treatment against hypoxic tumors

Hypoxia, one of the features of most solid tumors, can severely impede the efficiency of oxygen-dependent treatments such as chemotherapy, radiotherapy and type-II photodynamic therapy. Herein, a catalase-like nanozyme RuO₂@BSA (RB) was first prepared through a biomineralization strategy, and a high efficiency near-infrared photosensitizer (IR-808-Br₂) was further loaded into the protein shell to generate the safe and versatile RuO₂@BSA@IR-808-Br₂ (RBIR) for the imaging-guided enhanced phototherapy against hypoxic tumors. RB not only acts like a catalase, but also serves as a photothermal agent that speeds up the oxygen supply under near-infrared irradiation (808 nm). The loaded NIR photosensitizer could immediately convert molecular oxygen (O₂) to cytotoxic singlet oxygen (¹O₂) upon the same laser irradiation. Results indicated that RBIR achieved enhanced therapeutic outcomes with negligible side effects. Features such as a simple synthetic route and imaging-guided and single-wavelength-excited phototherapy make the nanozyme a promising agent for clinical applications.

Tetraphenylporphine-Modified Polymeric Nanoparticles Containing NIR Photosensitizer for Mitochondria-Targeting and Imaging-Guided Photodynamic Therapy

Near-infrared (NIR) photodynamic therapy (PDT) is a promising antitumor strategy under NIR light irradiation to kill cancer cells. Mitochondria has a critical function in sustaining cellular viability and death, which is the ideal organelle for PDT. Here, we reported a tetraphenylporphine (TPP)-conjugated amphiphilic copolymer and an iodinated boron dipyrromethene photosensitizer (BDPI) with high singlet oxygen yield to form nanoparticles (PBDPI-TPP), which could realize mitochondria-targeting and improve the NIR imaging-guided PDT. The as-prepared mitochondria-targeting nanoplatform could show effective subcellular localization and bring about significant irreversible mitochondrial injury for enhanced PDT. Both in vitro and in vivo experiments revealed that the mitochondria-targeting PDT system could achieve a remarkable therapeutic effect, indicating that it is a promising nanoplatform for NIR imaging-guided PDT in cancer therapeutics.

Rational design of block copolymer self-assemblies in photodynamic therapy

Photodynamic therapy is a technique already used in ophthalmology or oncology. It is based on the local production of reactive oxygen species through an energy transfer from an excited photosensitizer to oxygen present in the biological tissue. This review first presents an update, mainly covering the last five years, regarding the block copolymers used as nanovectors for the delivery of the photosensitizer. In particular, we describe the chemical nature and structure of the block copolymers showing a very large range of existing systems, spanning from natural polymers such as proteins or polysaccharides to synthetic ones such as polyesters or polyacrylates. A second part focuses on important parameters for their design and the improvement of their efficiency. Finally, particular attention has been paid to the question of nanocarrier internalization and interaction with membranes (both biomimetic and cellular), and the importance of intracellular targeting has been addressed.

Nanoparticle-based drug delivery systems for controllable photodynamic cancer therapy

Compared with the traditional treatment, photodynamic therapy (PDT) in the treatment of malignant tumors has the advantages of less damage to normal tissues, quick therapeutic effect, and ability to repeat treatments to the same site. However, most of the traditional photosensitizers (PSs) have severe skin photosensitization, poor tumor targeting, and low therapeutic effect in hypoxic tumor environment, which limit the application of PDT. Nanoparticle-based drug delivery systems can improve the targeting of PSs and release drugs with controllable photoactivity at predetermined locations, so as to achieve desired therapeutic effects with minimal side-effects. The present review summarizes the current nanoparticle platforms for PDT, and offers the description of different strategies including tumor-targeted delivery, controlled-release of PSs and the triggered photoactivity to achieve controllable PDT by nanoparticle-based drug delivery systems. The challenges and prospects for further development of intelligent PSs for PDT are also discussed.

Nanomedicine-Enabled Modulation of Tumor Hypoxic Microenvironment for Enhanced Cancer Therapy

Hypoxia is a common condition of solid tumors that is mainly caused by enhanced tumor proliferative activity and dysfunctional vasculature. In the treatment of hypoxic human solid tumors, many conventional therapeutic approaches (e.g., oxygen-dependent photodynamic therapy, anticancer drug-based chemotherapy or X-ray induced radiotherapy) become considerably less effective or ineffective. In recent years, various strategies have been explored to deliver or generate oxygen inside solid tumors to overcome tumorous hypoxia and show promising evidence to improve the antitumor efficiency. In this review, the extrinsic regulation of tumor hypoxia via nanomaterial delivery is discussed followed by a summary of the mechanisms through which the modulated tumor hypoxic microenvironment improves therapeutic efficacy. The review concludes with future perspectives, to specifically address the translation of nanomaterial-based therapeutic strategies for clinical applications.

Microenvironment-activated nanoparticles for oxygen self-supplemented photodynamic cancer therapy

Tumor hypoxia, as a hallmark of most solid tumors, poses a serious impediment to O₂-dependent anticancer therapies, such as photodynamic therapy (PDT). Although utilizing nanocarriers to load and transport O₂ to tumor tissues has been proved effective, the therapeutic outcomes have been impeded by the low O₂ capacity and limited tumor penetration of the nanocarriers. To address these problems, we incorporated perfluorooctyl moieties into nanocarriers to improve the encapsulation of perfluorooctyl bromide via fluorophilic interactions, leading to elevated O₂ capacity of the nanocarriers. Meanwhile, to enhance the tumor cell penetrating ability as well as reduce reticuloendothelial system recognition, the nanocarrier was further decorated with a cell-penetrating peptide, which was masked with a protecting group via an acid-labile amide bond for prolonged circulation time and acid-activated cell penetration. The in vitro study demonstrated that, apart from remarkably boosting the photocytoxicity of chlorin 6 (Ce6) at a low dosage, the rationally designed O₂@^DANP_Ce6+PFOB could even alleviate the pre-existing tumor hypoxia. After intravenous injection, O₂@^DANP_Ce6+PFOB exhibited significant tumor accumulation and retention, and potent tumor growth inhibition compared to traditional PDT. Overall, the O₂@^DANP_Ce6+PFOB mediated O₂ self-supplemented PDT with tumor acidic microenviornment-activated cell penetration provides a promising strategy in anticancer treatment.

Fighting Hypoxia to Improve PDT

Photodynamic therapy (PDT) has drawn great interest in recent years mainly due to its low side effects and few drug resistances. Nevertheless, one of the issues of PDT is the need for oxygen to induce a photodynamic effect. Tumours often have low oxygen concentrations, related to the abnormal structure of the microvessels leading to an ineffective blood distribution. Moreover, PDT consumes O2. In order to improve the oxygenation of tumour or decrease hypoxia, different strategies are developed and are described in this review: 1) The use of O2 vehicle; 2) the modification of the tumour microenvironment (TME); 3) combining other therapies with PDT; 4) hypoxia-independent PDT; 5) hypoxia-dependent PDT and 6) fractional PDT.

Sharp pH-responsive mannose prodrug polypeptide nanoparticles encapsulating a photosensitizer for enhanced near infrared imaging-guided photodynamic therapy

Mannose has been reported as a novel drug to kill cancer cells. The prodrug of mannose will promote its targeted delivery and enrichment at the tumor site and cancer cells. Here, a pH-sensitive polypeptide copolymer with a tertiary amine group has been prepared and a mannose molecule was conjugated to the polymer through the formation of a Schiff base. At the same time, an iodinated boron dipyrromethene (BDPI) photosensitizer with high singlet oxygen generation efficacy and near infrared (NIR) fluorescence was encapsulated by the nanoparticles, which makes it a potential pH-sensitive NIR imaging-guided chemotherapy/PDT agent. In vitro and in vivo studies reveal that in a tumor acidic environment, the protonation of the tertiary amine group destroyed the nanostructure of the nanoparticles, resulting in increased BDPI release. Meanwhile, the bond cleavage of the Schiff base led to the release of conjugated mannose and synergistic inhibition of tumor cell growth with the PDT effect was realized. The combination of these two kinds of tumor suppression effects and photodynamic therapy made this pH-sensitive polypeptide delivery system show great potential for further cancer therapy.

Facile synthesis of fluorinated nanophotosensitizers with self-supplied oxygen for efficient photodynamic therapy

Tumor hypoxia severely reduces the efficiency of photodynamic therapy (PDT) through the insufficient supply of oxygen. In this work, we reported on a design of fluorinated nanophotosensitizers (NPSs) prepared by a facile reprecipitation-encapsulation method, with the aim of addressing the issue of hypoxia. The fluorinated NPSs consisted of a hybrid particle core of perfluorosiloxane-polystyrene, doped with a fluorinated photosensitizer, and a biocompatible poly-l-lysine shell. Compared with non-fluorinated counterpart NPSs that are similarly prepared except for the replacement of perfluorosiloxane with alkoxysilane, the fluorinated NPSs saturated with O₂ exhibit approximately 3.5 fold higher singlet oxygen production yield and higher in vitro PDT efficiency due to the O₂-carrying capability of intra-particle 'F-C' bonds.

Boron Dipyrromethene Nano-Photosensitizers for Anticancer Phototherapies

As traditional phototherapy agents, boron dipyrromethene (BODIPY) photosensitizers have attracted increasing attention due to their high molar extinction coefficients, high phototherapy efficacy, and excellent photostability. After being formed into nanostructures, BODIPY-containing nano-photosensitizers show enhanced water solubility and biocompatibility as well as efficient tumor accumulation compared to BODIPY molecules. Hence, BODIPY nano-photosensitizers demonstrate a promising potential for fighting cancer. This review contains three sections, classifying photodynamic therapy (PDT), photothermal therapy (PTT), and the combination of PDT and PTT based on BODIPY nano-photosensitizers. It summarizes various BODIPY nano-photosensitizers, which are prepared via different approaches including molecular precipitation, supramolecular interactions, and polymer encapsulation. In each section, the design strategies and working principles of these BODIPY nano-photosensitizers are highlighted. In addition, the detailed in vitro and in vivo applications of these recently developed nano-photosensitizers are discussed together with future challenges in this field, highlighting the potential of these promising nanoagents for new tumor phototherapies.

Functional Polymer Nanocarriers for Photodynamic Therapy

Photodynamic therapy (PDT) is an appealing therapeutic modality in management of some solid tumors and other diseases for its minimal invasion and non-systemic toxicity. However, the hydrophobicity and non-selectivity of the photosensitizers, inherent serious hypoxia of tumor tissues and limited penetration depth of light restrict PDT further applications in clinic. Functional polymer nanoparticles can be used as a nanocarrier for accurate PDT. Here, we elucidate the mechanism and application of PDT in cancer treatments, and then review some strategies to administer the biodistribution and activation of photosensitizers (PSs) to ameliorate or utilize the tumor hypoxic microenvironment to enhance the photodynamic therapy effect.

High Singlet Oxygen Yield Photosensitizer Based Polypeptide Nanoparticles for Low-Power Near-Infrared Light Imaging-Guided Photodynamic Therapy

NIR photosensitizer is attractive for photodynamic therapy (PDT). Low-power light irradiation and imaging-guided PDT makes it possible to increase tissue penetration depth. The pyrrole-substituted iodinated BODIPY (BDPI) molecule was designed and synthesized, and it possesses an intense NIR absorption and emission band, and exhibits a high singlet oxygen quantum yield (Φ_Δ = 0.80) which leads remarkable cytotoxicity upon low power illumination (IC50 = 0.60 μg/mL, 6.1 mW/cm²). After being encapsulated with biocompatibility polypeptide PEG-PLys, polymeric micelles nanoparticles (PBDPI NPs) was obtained that are water-dispersed and passively tumor-targetable. Such enhanced accumulation in tumor area makes it easily traced in vivo due to its NIR fluorescence. In addition, such nanoparticles offer an unprecedented photodynamic therapeutic effect by using a low-power irradiation light, which makes it possible to kill cancer cells in deep tissue efficiently.

Polycarbonate-based core-crosslinked redox-responsive nanoparticles for targeted delivery of anticancer drug

We reported a facile and efficient strategy for the construction of polycarbonate-based core-crosslinked redox-responsive nanoparticles (CC-RRNs), which can efficiently regulate the drug loading content and redox-responsive drug release. A series of CC-RRNs for delivery of doxorubicin (DOX) were synthesized by the click reaction between alkyne-bearing amphiphilic block copolymer PEG-b-poly(MPC)_n (PMPC) and azide-terminated α-lipoic acid derivative (LA) and 6-bromohexanoic acid derivative (AHE) at different ratios, followed by introduction of crosslinked networks under a catalytic amount of dithiothreitol (DTT). Dynamic light scattering (DLS) experiments showed that the CC-RRNs presented more excellent stability over non-crosslinked unresponsive nanoparticles (NC-URNs) under physiological conditions. Interestingly, the DOX loading content of nanoparticles (NPs) increased as the proportion of LA moieties increased, and the maximum value was up to 20.0 ± 0.6%, close to the theoretical value of 23.1%. The in vitro redox-responsive release of DOX and MTT assays confirmed that the ratio of LA-to-AHE of PMPC-based polymers not only determined the ultimate drug release of DOX-loaded CC-RRNs in a reductive environment, but also dominated the cytotoxicity towards HepG2 cells. Confocal laser scanning microscopy (CLMS) and flow cytometry further proved the enhancement of cellular uptake and tumor accumulation. This facile strategy overcomes tedious fabrication procedures for drug nanocarriers, offers an opportunity for regulating the functionality of NPs, and thus paves the pathway for scale-up production of biodegradable drug carriers with biocompatibility, stability and targetability.