Flexible and conductive titanium carbide-carbon nanofibers for the simultaneous determination of ascorbic acid, dopamine and uric acid

Bovine Serum Albumin Template-Mediated Fabrication of Ruthenium Dioxide/Multiwalled Carbon Nanotubes: High-Performance Electrochemical Dopamine Biosensing in Human Serum

The presence of abnormal dopamine (DA) levels may cause serious neurological disorders, therefore, the quantitative analysis of DA and its related research are of great significance for ensuring health. Herein, the bovine serum albumin (BSA) template method has been proposed for the preparation of catalytically high-performance ruthenium dioxide/multiwalled carbon nanotube (RuO2/MWCNT) nanocomposites. The incorporation of MWCNTs has improved the active surface area and conductivity while effectively preventing the aggregation of RuO2 nanoparticles. The outstanding electrocatalytic performance of RuO2/MWCNTs has promoted the electro-oxidation of DA at neutral pH. The electrochemical sensing platform based on RuO2/MWCNTs has demonstrated a wide linear range (0.5 to 111.1 μM), low detection limit (0.167 μM), excellent selectivity, long-term stability, and good reproducibility for DA detection. The satisfactory recovery range of 94.7% to 103% exhibited by the proposed sensing podium in serum samples signifies its potential for analytical applications. The aforementioned results reveal that RuO2/MWCNT nanostructures hold promising aptitude in the electrochemical sensor to detect DA in real samples, further offering broad prospects in clinical and medical diagnosis.

Electrochemical Performance of Biocompatible TiC Films Deposited through Nonreactive RF Magnetron Sputtering for Neural Interfacing

The efficacy of neural electrode stimulation and recording hinges significantly on the choice of a neural electrode interface material. Transition metal carbides (TMCs), particularly titanium carbide (TiC), have demonstrated exceptional chemical stability and high electrical conductivity. Yet, the fabrication of TiC thin films and their potential application as neural electrode interfaces remains relatively unexplored. Herein, we present a systematic examination of TiC thin films synthesized through nonreactive radio frequency (RF) magnetron sputtering. TiC films were optimized toward high areal capacitance, low impedance, and stable electrochemical cyclability. We varied the RF power and deposition pressure to pinpoint the optimal properties, focusing on the deposition rate, surface roughness, crystallinity, and elemental composition to achieve high areal capacitance and low impedance. The best-performing TiC film showed an areal capacitance of 475 μF/cm2 with a capacitance retention of 93% after 5000 cycles. In addition, the electrochemical performance of the optimum film under varying scanning rates demonstrated a stable electrochemical performance even under dynamic and fast-changing stimulation conditions. Furthermore, the in vitro cell culture for 3 weeks revealed excellent biocompatibility, promoting cell growth compared with a control substrate. This work presents a novel contribution, highlighting the potential of sputtered TiC thin films as robust neural electrode interface materials.

Lignosulfonate in situ-modified reduced graphene oxide biosensors for the electrochemical detection of dopamine

Lignosulfonate (LS), a biomass by-product from sulfite pulping and the paper-making industry, which has many excellent characteristics, such as renewable, environmentally friendly, amphiphilic nature, and especially the abundant content of hydrophilic functional groups in its architecture, making it highly reactive and can be used as a sensitive material in sensors to show changes in electrical signals. Herein, we report a one-step in situ method to fabricate lignosulfonate-modified reduced graphene oxide (LS-rGO) green biosensors, which can be used for the sensitive electrochemical detection of dopamine without interference from uric acid and ascorbic acid. The modified LS molecular layers act as chemical-sensing layers, while the rGO planar sheets function as electric-transmitting layers in the as-assembled dopamine biosensors. After the in situ-decoration of the LS modifier, the sensing performance of LS-rGO for the detection of dopamine was much higher than that of the pure rGO electrode, and the highest current response of the biosensor toward dopamine greatly improved from 11.2 μA to 52.07 μA. The electrochemical sensitivity of the modified biosensor was optimized to be 0.43 μA μM^-1, and the detection limit was as low as 0.035 μM with a wide linear range (0.12-100 μM), which is better than that of most previously reported metal- and organic-based modified graphene electrodes. The newly designed biosensor has unique advantages including rapid, stable, sensitive and selective detection of dopamine without interference, providing a facile pathway for the synthesis of green resource-derived sensing materials instead of the traditional toxic and expensive modifiers.

Ascorbic acid-induced fiber-scrolling of titanium carbide Ti3C2T x MXene

Changing the morphology of two-dimensional materials often offers an efficient and effective means to exploit their electronic and mechanical properties. Two-dimensional materials such as graphene can be scrolled into one-dimensional fibers via simple sonication. Unfortunately, scrolling MXene nanosheets into fibers is quite challenging, especially Ti₃C₂T _x composed of three layers of titanium atoms and two layers of carbon atoms. Herein, we report a new method to fabricate MXene fibers via ascorbic acid (AA) induced scrolling of Ti₃C₂T _x nanosheets. An unusual AA-Ti₃C₂T _x interaction is discovered in that intercalated AA molecules bind to and interact with the Ti₃C₂T _x surface in the form of a hydrogen bonding-bonded assembly instead of as individual molecules, and a sheet-scrolling mechanism is proposed based on this interaction. The as-obtained MXene fibers exhibit a compact cross-section, and the diameter can be tailored from hundreds of nanometers to several micrometers through tuning the MXene/AA ratio. Moreover, the storage modulus of the MXene-fiber sponge attains its maximum value of ∼1 MPa when a unique morphology comprising both fibers and not-yet-scrolled sheets is presented. This work offers a new strategy of fiber-shaping MXenes for applications in structural composites and flexible electronics.

Recent advance in the fabrication of carbon nanofiber-based composite materials for wearable devices

Carbon nanofibers (CNFs) exhibit the advantages of high mechanical strength, good conductivity, easy production, and low cost, which have shown wide applications in the fields of materials science, nanotechnology, biomedicine, tissue engineering, sensors, wearable electronics, and other aspects. To promote the applications of CNF-based nanomaterials in wearable devices, the flexibility, electronic conductivity, thickness, weight, and bio-safety of CNF-based films/membranes are crucial. In this review, we present recent advances in the fabrication of CNF-based composite nanomaterials for flexible wearable devices. For this aim, firstly we introduce the synthesis and functionalization of CNFs, which promote the optimization of physical, chemical, and biological properties of CNFs. Then, the fabrication of two-dimensional and three-dimensional CNF-based materials are demonstrated. In addition, enhanced electric, mechanical, optical, magnetic, and biological properties of CNFs through the hybridization with other functional nanomaterials by synergistic effects are presented and discussed. Finally, wearable applications of CNF-based materials for flexible batteries, supercapacitors, strain/piezoresistive sensors, bio-signal detectors, and electromagnetic interference shielding devices are introduced and discussed in detail. We believe that this work will be beneficial for readers and researchers to understand both structural and functional tailoring of CNFs, and to design and fabricate novel CNF-based flexible and wearable devices for advanced applications.

A sensitive electrochemical DNA sensor for detecting Helicobacter pylori based on accordion-like Ti3C2Tx: a simple strategy

A novel electrochemical DNA sensor was designed to detect Helicobacter pylori based on accordion-like Ti₃C₂T_x. Here the multilayer Ti₃C₂T_x obtained by DMSO delamination was used to modify the glass carbon electrode, with a large specific surface area and excellent conductivity. Au nanoparticles were supported on the modified electrode and worked as an effective carrier to fix the capture probe (cpDNA) with sulfhydryl group through the firm binding of Au-S bond. Such an accordion-like Ti₃C₂T_x structure provides an ultrahigh electroactive surface area and ample binding sites for accommodating Au nanoparticles, which is advantageous for the signal amplification during the detection. And further, the sandwich structure formed by hybridizing cpDNA with target DNA sequence (tDNA) and rpDNA (rpDNA is a strand of DNA that can be base-paired with the tested tDNA) increases greatly the current signal and enhances the sensitivity of the electrochemical DNA sensor. Under optimal conditions, the developed electrochemical DNA sensor showed a wide linear range from 10^-11 to 10^-14 M and a low detection limit of 1.6 × 10^-16 M and exhibited good sensitivity, reproducibility, and stability. A novel electrochemical DNA sensor with simple sandwich structure was designed to detect H. pylori based on accordion-like Ti₃C₂T_x.

Selective and simultaneous sensing of ascorbic acid, dopamine and uric acid based on nitrogen-doped mesoporous carbon

Development of novel sensing nanostructures for facile, economical and fast applications has attracted more and more interest. Herein, a nitrogen-doped mesoporous carbon (NMC) was synthesized by pyrolyzing a mixture of melamine and carbon black at a low-temperature (600 °C) and exploited for the simultaneous sensing of ascorbic acid (AA), dopamine (DA) and uric acid (UA). The as-made NMC exhibits a rougher surface and smaller size than carbon black. Such a one-pot method is very versatile, quick and inexpensive, easy to handle (solvent-, catalyst-, and template-free) and scalable. The oxidation potentials of the NMC/GCE negatively shift and the current responses are enhanced greatly towards the oxidation of AA, DA and UA thanks to the large surface area, mesoporous structure and N-doped active sites. The peak to peak potential separations are 258 and 410 mV for AA-DA and AA-UA. The linear ranges of AA, DA and UA are 5-4500 μM, 0.005-35 μM and 0.5-3500 μM, respectively, and their detection limits are 0.15 μM (AA), 1.6 nM (DA) and 0.15 μM (UA). Meanwhile, the NMC/GCE exhibits satisfactory stability and anti-interference ability. These results show that NMC could be a promising candidate material for electrochemical sensor construction.

Hierarchical Porous Graphene-Iron Carbide Hybrid Derived From Functionalized Graphene-Based Metal-Organic Gel as Efficient Electrochemical Dopamine Sensor

A metal-organic gel (MOG) similar in constitution to MIL-100 (Fe) but containing a lower connectivity ligand (5-aminoisophthalate) was integrated with an isophthalate functionalized graphene (IG). The IG acted as a structure-directing templating agent, which also induced conductivity of the material. The MOG@IG was pyrolyzed at 600°C to obtain MGH-600, a hybrid of Fe/Fe3C/FeOx enveloped by graphene. MGH-600 shows a hierarchical pore structure, with micropores of 1.1 nm and a mesopore distribution between 2 and 6 nm, and Brunauer-Emmett-Teller surface area amounts to 216 m2/g. Furthermore, the MGH-600 composite displays magnetic properties, with bulk saturation magnetization value of 130 emu/g at room temperature. The material coated on glassy carbon electrode can distinguish between molecules with the same oxidation potential, such as dopamine in presence of ascorbic acid and revealed a satisfactory limit of detection and limit of quantification (4.39 × 10-7 and 1.33 × 10-6 M, respectively) for the neurotransmitter dopamine.

Ultrasensitive self-enhanced electrochemiluminescence sensor based on novel PAN@Ru@PEI@Nafion nanofiber mat

A novel self-enhanced electrochemiluminescence nanofiber mat was for the first time prepared by one-step electrospinning a mixture of polyacrylonitrile, Ru(bpy)₃²⁺, poly(ethylenimine) and Nafion.

A highly sensitive sensor based on ordered mesoporous ZnFe2O4 for electrochemical detection of dopamine

Accurate and sensitive detection of dopamine (DA) is fundamental to monitor and diagnose certain neurological diseases. Herein, highly ordered mesoporous ZnFe₂O₄ (OM-ZnFe₂O₄) is prepared via a facile nanocasting method and shows the highly sensitive in the electrochemical detection of DA. The optimized OM-ZnFe₂O₄-40 shows the most excellent activity for DA oxidation in a wide linear range from 2 to 600 nM with a quick response time of 5 s, high sensitivity of 0.094 nA nM^-1 and a lower detection limit of 0.4 nM (S/N = 3). The electrode modified with OM-ZnFe₂O₄ is further successfully used to monitor the increase of DA concentration induced by K⁺-stimulation of living PC12 cells in a neurological environment. This work offers a simple and powerful strategy for designing electrodes for detecting DA in biological systems.

Electrochemical detection of toxic anti-scald agent diphenylamine using oxidized carbon nanofiber encapsulated titanium carbide electrocatalyst

Two dimensional (2D) titanium carbide (Ti-C) is an analogues of graphene have tremendous attention in recent years due to their high electrical conductivity and catalytic activity. Herein, we have synthesized Ti-C micro particles based on the template-assisted method and subsequently integrated with oxidized carbon nanofiber (f-CNF) through ultrasonication technique. The prepared Ti-C/f-CNF composite was subjected to various structural and morphological characterization techniques including the X-ray diffraction (XRD), scanning electron microscope (SEM), Energy Dispersive X-ray (EDX) and X-ray photoelectron spectroscopy (XPS). The all followed studies confirmed the formation and crystalline nature of prepared Ti-C/f-CNF nanocomposite. Further, the proposed Ti-C/f-CNF composite modified electrode was successfully applied as an electrocatalyst for the electrochemical detection of diphenylamine (DPA) in food. DPA is known as an anti-scald agent used to post harvest treatment of fruits. However, the higher concentration of DPA causes some hazardous side effects to human. Thus, the detection of DPA is an important concern in healthcare research. Eventually, the proposed Ti-C/f-CNF/SPCE exhibited ultra-low detection limit of (0.003 μM) with a linear range of 0.04-56.82 μM towards the detection of DPA. Moreover, the practicability of the proposed sensor was tested by real sample analysis by using fresh apple extract. Remarkably, the proposed sensor showed an excellent recovery range from 106.8% to 108% for the detection of DPA in spiked apple extract. Finally, we concluded that the integration of f-CNF with Ti-C is significantly enhanced both electrical conductivity and electrocatalytic activity for sensor application.

A Sensitive Pyrimethanil Sensor Based on Electrospun TiC/C Film

Titanium carbide (TiC) is a very significant transition metal carbide that displays excellent stability and electrical conductivity. The electrocatalytic activity of TiC is similar to noble metals but is much less expensive. Herein, carbon nanofibers (CNFs)-supported TiC nanoparticles (NPs) film (TiC/C) is prepared by electrospinning and carbothermal processes. Well-dispersed TiC NPs are embedded tightly into the CNFs frameworks. The electrochemical oxidation of pyrimethanil (PMT) at the TiC/C-modified electrode displays enhanced redox properties, and the electrode surface is controlled simultaneously both by diffusion and adsorption processes. When TiC/C is applied for PMT determination, the as-fabricated sensor shows good sensing performance, displaying a wide linear range (0.1⁻600 μM, R² = 0.998), low detection limit (33 nM, S/N = 3), and good reproducibility with satisfied anti-interference ability. In addition, TiC/C shows long-term stability and good application in natural samples. The facile synthetic method with good sensing performance makes TiC/C promising as novel electrode materials to fabricate efficient sensors.

TiC doped palladium/nickel foam cathode for electrocatalytic hydrodechlorination of 2,4-DCBA: Enhanced electrical conductivity and reactive activity

Titanium carbide (TiC) with excellent electrical conductivity, chemical and thermal stabilities has been recognized as one of the most promising electrocatalysts. A novel cathode, titanium carbide doped palladium/nickel foam (TiC-Pd/Ni foam), was synthesized via electroless deposition to improve the performance of Pd/Ni foam in electrocatlytic hydrodechlorination (ECH). TiC can be co-precipitated onto the surface of cathode during galvanic replacement reaction between Pd(II) solution and Ni foam. Both constant potential and constant current tests proved that TiC-Pd/Ni foam cathode performed remarkably higher activity for 2,4-dichlorobenzoic acid (2,4-DCBA) than Pd/Ni foam cathode, owing to the excellent conductivity of TiC and enhanced water dissociation over TiC-Pd/Ni foam cathode. Under the optimized reaction conditions of -0.85 V (vs Ag/AgCl), electrolyte of 10 mM and initial pH of 4, 99.8% of aqueous 2,4-DCBA (0.2 mM) was removed within 90 min. The removal process of the aqueous 2,4-DCBA obeyed first-order decay kinetic model. Over 86.3% of 2,4-DCBA can still be removed by TiC-Pd/Ni foam cathode in the fifth consecutive run within 120 min, which was much higher than that of Pd/Ni foam cathode (37.5%). Consequently, TiC-Pd/Ni foam cathode was a promising design for enhanced ECH activity and reduced operation cost.

Facile, low-temperature synthesis of tungsten carbide (WC) flakes for the sensitive and selective electrocatalytic detection of dopamine in biological samples

Transition metal carbides have shown potential for use in electrochemical applications due to their excellent electronic conductivity, stability and electrocatalysis.

Nanochannel-Confined Graphene Quantum Dots for Ultrasensitive Electrochemical Analysis of Complex Samples

Herein, we present an electrochemical sensing platform based on nanochannel-confined graphene quantum dots (GQDs) that is able to detect a spectrum of small analytes in complex samples with high sensitivity. Vertically ordered mesoporous silica-nanochannel film (VMSF) is decorated on the supporting electrode, conferring the electrode with excellent antifouling and anti-interference properties through steric exclusion and electrostatic repulsion. The synthesized GQDs with different functionalities are confined in the nanochannels of VMSF through electrophoresis, serving as the recognition element and signal amplifier. Without the usual need of tedious pretreatment, ultrasensitive and fast detection of Hg²⁺, Cu²⁺, and Cd²⁺ (with limits of detection (LOD) of 9.8 pM, 8.3 pM, and 4.3 nM, respectively) and dopamine (LOD of 120 nM) in complex food (Hg²⁺-contaminated seafood), environmental (soil-leaching solution), and biological (serum) samples are realized as proof-of-concept demonstrations.

Graphitic porous carbon: efficient synthesis by a combustion method and application as a highly selective biosensor

Efficient synthesis of graphitic porous carbon by combustion method for the simultaneous determination of uric acid and dopamine.