Potentiation of the ibuprofen antihyperalgesic effect using inorganically functionalized diatomite

Characterization of Chitosan-Hybridized Diatomite as Potential Delivery Systems of Oxaliplatin and 5-Fluorouracil Drugs: Equilibrium and Release Kinetics

The current work involves the modification of diatomite's biosiliceous frustules employing chitosan polymer chains (CS/Di) to serve as low-cost, biocompatible, multifunctional, and enhanced pharmaceutical delivery systems for 5-fluorouracil (5-Fu) together with oxaliplatin (OXPL). The CS/Di carrier displayed strong loading characteristics, notably at saturation (249.17 mg/g (OXPL) and 267.6 mg/g (5-Fu)), demonstrating a substantial 5-Fu affinity. The loading of the two types of medications onto CS/Di was conducted based on the kinetic behaviors of the conventional pseudo-first-order theory (R2 > 0.90). However, while the loading of OXPL follows the isotherm assumptions of the classic Langmuir model (R2 = 0.99), the loading of 5-Fu displays Fruendlich isotherm properties. Therefore, the 5-Fu loading displayed physical, heterogeneous, and multilayer loading properties, whereas the loading of OXPL occurred in homogeneous and monolayer form. The densities of occupied active sites of CS/Di were 37.19 and 32.8 mg/g for the sequestrations of OXPL and 5-Fu, respectively. Furthermore, by means of multimolecular processes, each loading site of CS/Di can bind up to 8 molecules of OXPL and 9 molecules of 5-Fu in a vertical orientation. This observation explains the higher loading capacities of 5-Fu in comparison to OXPL. The loading energies, which exhibit values <40 kJ/mol, provide confirmation of the dominant and significant consequences of physical processes as the regulating mechanisms. The release patterns of OXPL and 5-Fu demonstrate prolonged features over a duration of up to 120 h. The release kinetic simulation and diffusion exponents which are more than 0.45 provide evidence of the release of OXP and 5-Fu via non-Fickian transportation characteristics and the erosion/diffusion mechanism. The CS/Di carrier exhibited a substantial enhancement in the cytotoxicity of OXPL and 5-Fu against HCT-116 carcinoma cell lines, resulting in a reduction in cell viability by 4.61 and 2.26% respectively.

How to Obtain Maximum Environmental Applicability from Natural Silicates

Unmodified natural silicates (bentonite, kaolin, clinoptilolite and diatomites) were tested as adsorbents for the organic pollutants in water tables using Methylene Blue (MB) as the model adsorbate. Among the selected materials, bentonite adsorbed as much as 237 mg/g, confirming its excellent suitability for pollutant removal. Spectral evidence confirmed successful MB immobilization at the bentonite surface. Furthermore, the thermal treatment of MB-saturated adsorbent in an inert atmosphere at 700 °C produced a carbon/silicate composite. EDX confirmed the formation of the nitrogen-doped carbon overlay on the silica scaffold and the obtained composite material was probed as an electrode material for oxygen reduction in an alkaline solution. Reduction proceeded via a two-electron mechanism with the main product being HO2−, a known nucleophile, which was subsequently used to degrade/demethylate MB. The composite showed a considerable 70% MB removal rate after an hour of electrochemical treatment. The synergy between the processes of adsorption of MB and the surface-generated HO2− dictates the efficiency of the method and points to a possible route for spent adsorbent reuse in the form of a durable product for environmental protection.

A SERS platform based on diatomite modified by gold nanoparticles using a combination of layer-by-layer assembly and a freezing-induced loading method

Siliceous diatom frustules represent an up-and-coming platform for a range of bio-assisted nanofabrication processes able to overcome the complexity and high cost of current engineering technology solutions in terms of negligibly small power consumption and environmentally friendly processing combined with unique highly porous structures and properties. Herein, the modification of diatomite - a soft, loose, and fine-grained siliceous sedimentary rock composed of the remains of fossilized diatoms - with gold nanoparticles using layer-by-layer technology in combination with a freezing-induced loading approach is demonstrated. The obtained composite structures are characterized by dynamic light scattering, extinction spectroscopy, scanning (SEM) and transmission electron microscopy (TEM), and photoacoustic imaging techniques, and tested as a platform for surface-enhanced Raman scattering (SERS) using Rhodamine 6G. SEM, TEM, and energy dispersive X-ray spectroscopy (EDX) confirmed a dense coating of gold nanoparticles with an average size of 19 nm on the surface of the diatomite and within the pores. The photoacoustic signal excited at a wavelength of 532 nm increases with increasing loading cycles of up to three polyelectrolyte-gold nanoparticle bilayers. The hybrid materials based on diatomite modified with gold nanoparticles can be used as SERS substrates, but also as biosensors, catalysts, and platforms for advanced bioimaging.

Photoactivatable Surface-Functionalized Diatom Microalgae for Colorectal Cancer Targeted Delivery and Enhanced Cytotoxicity of Anticancer Complexes

Systemic toxicity and severe side effects are commonly associated with anticancer chemotherapies. New strategies based on enhanced drug selectivity and targeted delivery to cancer cells while leaving healthy tissue undamaged can reduce the global patient burden. Herein, we report the design, synthesis and characterization of a bio-inspired hybrid multifunctional drug delivery system based on diatom microalgae. The microalgae's surface was chemically functionalized with hybrid vitamin B12-photoactivatable molecules and the materials further loaded with highly active rhenium(I) tricarbonyl anticancer complexes. The constructs showed enhanced adherence to colorectal cancer (CRC) cells and slow release of the chemotherapeutic drugs. The overall toxicity of the hybrid multifunctional drug delivery system was further enhanced by photoactivation of the microalgae surface. Depending on the construct and anticancer drug, a 2-fold increase in the cytotoxic efficacy of the drug was observed upon light irradiation. The use of this targeted drug delivery strategy, together with selective spatial-temporal light activation, may lead to lower effective concentration of anticancer drugs, thereby reducing medication doses, possible side effects and overall burden for the patient.

Characterization of Diatomaceous Earth and Halloysite Resources of Poland

The mining industry of Poland is based mostly on coal and copper ores. Strict carbon emissions and the depletion of deposits will slowly phase out coal. Therefore, metallic ores and other mineral raw materials will dominate the extractive industry of Poland. Current measured resources of the largest deposits of halloysite and diatomaceous earth in Poland are over 0.5 Mt and 10 Mt, respectively. Halloysite and diatomaceous earth samples from halloysite Dunino deposits and Jawornik diatomaceous earth deposits (composed mostly of diatomaceous skeletons (frustules)) were subjected to mineralogical analysis, scanning electron microscopy/energy-dispersive X-ray spectroscopy (SEM-EDS) nanostructural, chemical, elemental, and mineral content analysis. Both these minerals have similar properties, i.e., sorption capacity and cation exchange capacity, and are used mostly for the same purposes, e.g., adsorbents, filler material, and filtration. Samples of Dunino halloysite consist of minerals such as halloysite, kaolinite, hematite, magnetite, quartz, magnesioferrite, rutile, ilmenite, geikielite, goyazite, gorceixite, and crandallite, with little impurities in the form of iron oxides. Occasionally, halloysite nanoplates (HNP) nanotubes (HNT) were found. Diatomaceous earth is composed mainly of silica-containing phases (quartz, opal) and clay minerals (illite and kaolinite). The frustules of diatoms are mostly centric (discoid) and have radius values of approximately 50–60 μm. Large resources of these minerals could be used in the future either for manufacturing composite materials or highly advanced adsorbents.

Natural Diatom Biosilica as Microshuttles in Drug Delivery Systems

Unicellular diatom microalgae are a promising natural resource of porous biosilica. These microorganisms produce around their membrane a highly porous and extremely structured silica shell called frustule. Once harvested from living algae or from fossil sediments of diatomaceous earth, this biocompatible and non-toxic material offers an exceptional potential in the field of micro/nano-devices, drug delivery, theranostics, and other medical applications. The present review focused on the use of diatoms in the field of drug delivery systems, with the aim of presenting the different strategies implemented to improve the biophysical properties of this biosilica in terms of drug loading and release efficiency, targeted delivery, or site-specific binding capacity by surface functionalization. The development of composite materials involving diatoms for drug delivery applications is also described.