Orthogonal click reactions enable the synthesis of ECM-mimetic PEG hydrogels without multi-arm precursors

Challenges in Application: Gelation Strategies of DAT-Based Hydrogel Scaffolds

Decellularized adipose tissue (DAT) has great clinical applicability, owing to its abundant source material, natural extracellular matrix microenvironment, and nonimmunogenic attributes, rendering it a versatile resource in the realm of tissue engineering. However, practical implementations are confronted with multifarious limitations. Among these, the selection of an appropriate gelation strategy serves as the foundation for adapting to diverse clinical contexts. The cross-linking strategies under varying physical or chemical conditions exert profound influences on the ultimate morphology and therapeutic efficacy of DAT. This review sums up the processes of DAT decellularization and subsequent gelation, with a specific emphasis on the diverse gelation strategies employed in recent experimental applications of DAT. The review expounds upon methodologies, underlying principles, and clinical implications of different gelation strategies, aiming to offer insights and inspiration for the application of DAT in tissue engineering and advance research for tissue engineering scaffold development.

Next Evolution in Organ-Scale Biofabrication: Bioresin Design for Rapid High-Resolution Vat Polymerization

The field of bioprinting has made significant advancements in recent years and allowed for the precise deposition of biomaterials and cells. However, within this field lies a major challenge, which is developing high resolution constructs, with complex architectures. In an effort to overcome these challenges a biofabrication technique known as vat polymerization is being increasingly investigated due to its high fabrication accuracy and control of resolution (µm scale). Despite the progress made in developing hydrogel precursors for bioprinting techniques, such as extrusion-based bioprinting, there is a major lack in developing hydrogel precursor bioresins for vat polymerization. This is due to the specific unique properties and characteristics required for vat polymerization, from lithography to the latest volumetric printing. This is of major concern as the shortage of bioresins available has a significant impact on progressing this technology and exploring its full potential, including speed, resolution, and scale. Therefore, this review discusses the key requirements that need to be addressed in successfully developing a bioresin. The influence of monomer architecture and bioresin composition on printability is described, along with key fundamental parameters that can be altered to increase printing accuracy. Finally, recent advancements in bioresins are discussed together with future directions.

Click-functionalized hydrogel design for mechanobiology investigations

The advancement of click-functionalized hydrogels in recent years has coincided with rapid growth in the fields of mechanobiology, tissue engineering, and regenerative medicine. Click chemistries represent a group of reactions that possess high reactivity and specificity, are cytocompatible, and generally proceed under physiologic conditions. Most notably, the high level of tunability afforded by these reactions enables the design of user-controlled and tissue-mimicking hydrogels in which the influence of important physical and biochemical cues on normal and aberrant cellular behaviors can be independently assessed. Several critical tissue properties, including stiffness, viscoelasticity, and biomolecule presentation, are known to regulate cell mechanobiology in the context of development, wound repair, and disease. However, many questions still remain about how the individual and combined effects of these instructive properties regulate the cellular and molecular mechanisms governing physiologic and pathologic processes. In this review, we discuss several click chemistries that have been adopted to design dynamic and instructive hydrogels for mechanobiology investigations. We also chart a path forward for how click hydrogels can help reveal important insights about complex tissue microenvironments.

Expanding the Thiol-X Toolbox: Photoinitiation and Materials Application of the Acid-Catalyzed Thiol-ene (ACT) Reaction

The acid-catalyzed thiol-ene reaction (ACT) is a unique thiol-X conjugation strategy that produces S,X-acetal conjugates. Unlike the well-known radical-mediated thiol-ene and anion-mediated thiol-Michael reactions that produce static thioether bonds, acetals provide unique function for various fields such as drug delivery and protecting group chemistries; however, this reaction is relatively underutilized for creating new and unique materials owing to the unexplored reactivity over a broad set of substrates and potential side reactions. Solution-phase studies using a range of thiol and alkene substrates were conducted to evaluate the ACT reaction as a conjugation strategy. Substrates that efficiently undergo cationic polymerizations, such as those containing vinyl functional groups, were found to be highly reactive to thiols in the presence of catalytic amounts of acid. Additionally, sequential initiation of three separate thiol-X reactions (thiol-Michael, ACT, and thiol-ene) was achieved in a one-pot scheme simply by the addition of the appropriate catalyst demonstrating substrate selectivity. Furthermore, photoinitiation of the ACT reaction was achieved for the first time under 470 nm blue light using a novel photochromic photoacid. Finally, using multifunctional monomers, solid-state polymer networks were formed using the ACT reaction producing acetal crosslinks. The presence of S,X-acetal bonds results in an increased glass transition temperature of 20 °C as compared with the same polymeric film polymerized through the radical thiol-ene mechanism. This investigation demonstrates the broad impact of the ACT reaction and expands upon the diverse thiol-X library of conjugation strategies towards the development of novel materials systems.

Characterizing the Molecular Architecture of Hydrogels and Crosslinked Polymer Networks beyond Flory-Rehner-I. Theory

In the early 1940s, Paul Flory and John Rehner published a series of papers on the properties of swellable polymeric networks. Originally intended for vulcanized rubber, their development has since been extensively used and extended to much more complex systems, such as hydrogels, and used to estimate the mesh size of such networks. In this article, we take a look at the development of the Flory-Rehner equation and highlight several issues that arise when using such a theory for the described hydrogel networks. We then propose a new approach and equations to accurately calculate the backbone molecular weight in-between crosslinks while explicitly accounting for the molecular mass of the crosslinker and branch segments. The approach also provides more applicable mesh dimensions, for complex networks with macromeric crosslinkers and/or a high degree of branching, as is the case of biocompatible hydrogels. The approach is finally illustrated by a case study comparing the values obtained with our proposed approach to those using the state-of-the-art approach.

A sequential 3D bioprinting and orthogonal bioconjugation approach for precision tissue engineering

Recent advances in 3D bioprinting have transformed the tissue engineering landscape by enabling the controlled placement of cells, biomaterials, and bioactive agents for the biofabrication of living tissues and organs. However, the application of 3D bioprinting is limited by the availability of cytocompatible and printable biomaterials that recapitulate properties of native tissues. Here, we developed an integrated 3D projection bioprinting and orthogonal photoconjugation platform for precision tissue engineering of tailored microenvironments. By using a photoreactive thiol-ene gelatin bioink, soft hydrogels can be bioprinted into complex geometries and photopatterned with bioactive moieties in a rapid and scalable manner via digital light projection (DLP) technology. This enables localized modulation of biophysical properties such as stiffness and microarchitecture as well as precise control over spatial distribution and concentration of immobilized functional groups. As such, well-defined properties can be directly incorporated using a single platform to produce desired tissue-specific functions within bioprinted constructs. We demonstrated high viability of encapsulated endothelial cells and human cardiomyocytes using our dual process and fabricated tissue constructs functionalized with VEGF peptide mimics to induce guided endothelial cell growth for programmable vascularization. This work represents a pivotal step in engineering multifunctional constructs with unprecedented control, precision, and versatility for the rational design of biomimetic tissues.

Photopolymerizable Biomaterials and Light-Based 3D Printing Strategies for Biomedical Applications

Since the advent of additive manufacturing, known commonly as 3D printing, this technology has revolutionized the biofabrication landscape and driven numerous pivotal advancements in tissue engineering and regenerative medicine. Many 3D printing methods were developed in short course after Charles Hull first introduced the power of stereolithography to the world. However, materials development was not met with the same enthusiasm and remained the bottleneck in the field for some time. Only in the past decade has there been deliberate development to expand the materials toolbox for 3D printing applications to meet the true potential of 3D printing technologies. Herein, we review the development of biomaterials suited for light-based 3D printing modalities with an emphasis on bioprinting applications. We discuss the chemical mechanisms that govern photopolymerization and highlight the application of natural, synthetic, and composite biomaterials as 3D printed hydrogels. Because the quality of a 3D printed construct is highly dependent on both the material properties and processing technique, we included a final section on the theoretical and practical aspects behind light-based 3D printing as well as ways to employ that knowledge to troubleshoot and standardize the optimization of printing parameters.

Synthesis and Evaluation of Cytocompatible Alkyne-Containing Poly(β-amino ester)-Based Hydrogels Functionalized via Click Reaction

Although poly(β-amino esters) (PAEs) have been widely applied in nonviral gene transfection, drug delivery systems, and regenerative medicine, the multifunctional modification of PAEs and bio-orthogonal strategies of PAE-based hydrogel functionalization is still a challenge. Herein, a strategy of poly(β-amino ester)-based hydrogel functionalization was developed via bio-orthogonal reactions in this study. Acrylate-terminated poly(β-amino esters) containing alkyne groups were synthesized by Michael addition reaction. Alkyne groups on poly(β-amino esters) could conjugate bioactive molecules with azide of K(N₃)RGD via copper-catalyzed azide-alkyne cycloaddition, and terminal acrylate groups could in situ polymerize to prepare a hydrogel. A biomimetic peptide K(N₃)RGD functionalized hydrogel was prepared by polymerization of acrylate-terminated poly(β-amino esters) containing conjugated peptide and polyethylene glycol diacrylate (PEGDA). The storage modulus and mechanical properties exhibited an increased trend with the increased concentration; nevertheless, swelling ratio and surface wetting properties demonstrated a decreased tendency by increased concentrations. Cell proliferation and live/dead staining showed that Schwann cells plated on the hydrogel with an elastic modulus of 25.39 KPa are more suitable for proliferation and function exertion of Schwann cells compared with that of 42.11 and 57.86 KPa, and KRGD-conjugated hydrogel could increase the elongation of Schwann cells relative to nonconjugated hydrogels. This azide-alkyne strategy may be a promising candidate for hydrogel functionalization in tissue engineering and other biomedical applications.

Easily readable palindromic sequence-defined polymers built by cascade thiol-maleimide Michael couplings

The rational combination of cascade thiol-maleimide Michael couplings (CTMMC) with iterative exponential chain growth was demonstrated as an efficient way to synthesize palindromic sequence-defined polymers.

Bio-orthogonal, Site-Selective Conjugation of Recombinant Proteins to Microporous Annealed Particle Hydrogels for Tissue Engineering

Protein conjugation to biomaterial scaffolds is a powerful approach for tissue engineering. However, typical chemical conjugation methods lack site-selectivity and can negatively impact protein bioactivity. To overcome this problem, a site-selective strategy is reported here for installing tetrazine groups on terminal poly-histidines (His-tags) of recombinant proteins. These tetrazine groups are then leveraged for bio-orthogonal conjugation to poly(ethylene glycol) (PEG) hydrogel microparticles, which are subsequently assembled into microporous annealed particle (MAP) hydrogels. Efficacy of the strategy is demonstrated using recombinant, green fluorescent protein with a His tag (His-GFP), which enhanced fluorescence of the MAP hydrogels compared to control protein lacking tetrazine groups. Subsequently, to demonstrate efficacy with a therapeutic protein, recombinant human bone morphogenetic protein-2 (His-BMP2) was conjugated. Human mesenchymal stem cells growing in the MAP hydrogels responded to the conjugated BMP2 and significantly increased mineralization after 21 days compared to controls. Thus, this site-selective protein modification strategy coupled with bio-orthogonal click chemistry is expected to be useful for bone defect repair and regeneration therapies. Broader application to the integration of protein therapeutics with biomaterials is also envisioned.

Microporous Bio-orthogonally Annealed Particle Hydrogels for Tissue Engineering and Regenerative Medicine

Microporous annealed particle (MAP) hydrogels are an emerging class of biomaterials with the potential to improve outcomes in tissue repair and regeneration. Here, a new MAP hydrogel platform comprising poly(ethylene) glycol (PEG) hydrogel microparticles that are annealed in situ using bio-orthogonal tetrazine click chemistry is reported (i.e., TzMAP hydrogels). Briefly, clickable PEG-peptide hydrogel microparticles with extracellular matrix mimetic peptides to permit cell adhesion and enzymatic degradation were fabricated via submerged electrospraying and stoichiometrically controlled thiol-norbornene click chemistry. Subsequently, unreacted norbornene groups in the microparticles were leveraged for functionalization with bioactive proteins as well as annealing into TzMAP hydrogels via the tetrazine-norbornene click reaction, which is highly selective and proceeds spontaneously without requiring an initiator or catalyst. The results demonstrate that the clickable particles can be easily applied to a tissue-like defect and then annealed into an inherently microporous structure in situ. In addition, the ability to produce TzMAP hydrogels with heterogeneous properties by incorporating multiple types of hydrogel microspheres is demonstrated, first with fluorophore-functionalized hydrogel microparticles and then with protein-functionalized hydrogel microparticles. For the latter, tetrazine-modified alkaline phosphatase was conjugated to PEG hydrogel microparticles, which were mixed with nonfunctionalized microparticles and used to produce TzMAP hydrogels. A biomimetic mineralized/nonmineralized interface was then produced upon incubation in calcium glycerophosphate. Finally, platelet-derived growth factor-BB (PDGF-BB) and human periodontal ligament stem cells (PDLSC) were incorporated into the TzMAP hydrogels during the annealing step to demonstrate their potential for delivering regenerative therapeutics, specifically for periodontal tissue regeneration. In vitro characterization revealed excellent PDGF-BB retention as well as PDLSC growth and spreading. Moreover, PDGF-BB loading increased PDLSC proliferation within hydrogels by 90% and more than doubled the average volume per cell. Overall, these results demonstrate that TzMAP hydrogels are a versatile new platform for the delivery of stem cells and regenerative factors.

Enzymatic Cross-Linking of Dynamic Thiol-Norbornene Click Hydrogels

Enzyme-mediated in situ forming hydrogels are attractive for many biomedical applications because gelation afforded by the enzymatic reactions can be readily controlled not only by tuning macromer compositions, but also by adjusting enzyme kinetics. For example, horseradish peroxidase (HRP) has been used extensively for in situ crosslinking of macromers containing hydroxyl-phenol groups. The use of HRP on initiating thiol-allylether polymerization has also been reported, yet no prior study has demonstrated enzymatic initiation of thiol-norbornene gelation. In this study, we discovered that HRP can generate thiyl radicals needed for initiating thiol-norbornene hydrogelation, which has only been demonstrated previously using photopolymerization. Enzymatic thiol-norbornene gelation not only overcomes light attenuation issue commonly observed in photopolymerized hydrogels, but also preserves modularity of the crosslinking. In particular, we prepared modular hydrogels from two sets of norbornene-modified macromers, 8-arm poly(ethylene glycol)-norbornene (PEG8NB) and gelatin-norbornene (GelNB). Bis-cysteine-containing peptides or PEG-tetra-thiol (PEG4SH) were used as crosslinkers for forming enzymatically and orthogonally polymerized hydrogels. For HRP-initiated PEG-peptide hydrogel crosslinking, gelation efficiency was significantly improved via adding tyrosine residues on the peptide crosslinkers. Interestingly, these additional tyrosine residues did not form permanent dityrosine crosslinks following HRP-induced gelation. As a result, they remained available for tyrosinase-mediated secondary crosslinking, which dynamically increases hydrogel stiffness. In addition to material characterizations, we also found that both PEG- and gelatin-based hydrogels provide excellent cytocompatibility for dynamic 3D cell culture. The enzymatic thiol-norbornene gelation scheme presented here offers a new crosslinking mechanism for preparing modularly and dynamically crosslinked hydrogels.