Nanosensor based approaches for quantitative detection of heparin

Heparin, being a widely employed anticoagulant in numerus clinical complications, requires strict quantification and qualitative screening to ensure the safety of patients from potential threat of thrombocytopenia. However, the intricacy of heparin's chemical structures and low abundance hinders the precise monitoring of its level and quality in clinical settings. Conventional laboratory assays have limitations in sensitivity and specificity, necessitating the development of innovative approaches. In this context, nanosensors emerged as a promising solution due to enhanced sensitivity, selectivity, and ability to detect heparin even at low concentrations. This review delves into a range of sensing approaches including colorimetric, fluorometric, surface-enhanced Raman spectroscopy, and electrochemical techniques using different types of nanomaterials, thus providing insights of its principles, capabilities, and limitations. Moreover, integration of smart-phone with nanosensors for point of care diagnostics has also been explored. Additionally, recent advances in nanopore technologies, artificial intelligence (AI) and machine learning (ML) have been discussed offering specificity against contaminants present in heparin to ensure its quality. By consolidating current knowledge and highlighting the potential of nanosensors, this review aims to contribute to the advancement of efficient, reliable, and economical heparin detection methods providing improved patient care.

A ratiometric fluorescent "off-on" sensor for acrylamide detection in toast based on red-emitting copper nanoclusters stabilized by bovine serum albumin

Acrylamide, as a Class 2A carcinogen, poses serious threats to human health. To achieve rapid and accurate determination of acrylamide in food, a ratiometric fluorescent "off-on" sensor was designed by incorporating red-emitting copper nanoclusters and glutathione. Copper nanoclusters with bimodal emission at 395 nm and 650 nm (excited at 310 nm) were synthesized by using bovine serum albumin as the ligand and ascorbic acid as the reductant. With glutathione addition, the fluorescence intensity at 650 nm gradually decreased, while the case at 395 nm slightly increased. The quenched fluorescence at 650 nm was subsequently restored by acrylamide through thiol-ene Michael addition reaction between acrylamide and glutathione. The constructed sensor showed excellent performance towards acrylamide detection in the range of 5-300 μM with a detection limit of 1.48 μM, and was further applied to real-sample detection of acrylamide in toast and exhibited good recoveries (90.29-101.30 %), indicating potential applications of this sensor.

Synthesis of Copper Nanocluster and Its Application in Pollutant Analysis

Copper nanoclusters (Cu NCs) with their inherent optical and chemical advantages have gained increasing attention as a kind of novel material that possesses great potential, primarily in the use of contaminants sensing and bio-imaging. With a focus on environmental safety, this article comprehensively reviews the recent advances of Cu NCs in the application of various contaminants, including pesticide residues, heavy metal ions, sulfide ions and nitroaromatics. The common preparation methods and sensing mechanisms are summarized. The typical high-quality sensing probes based on Cu NCs towards various target contaminants are presented; additionally, the challenges and future perspectives in the development and application of Cu NCs in monitoring and analyzing environmental pollutants are discussed.

A ratiometric fluorescent sensing of proanthocyanidins by MnO2 nanosheets simultaneously tuning the photoluminescence of Au/AgNCs and thiamine

By simultaneously regulating the photoluminescence of alloy Au/Ag nanoclusters (NCs) and thiamine (VB1) through MnO₂ nanosheets (MnO₂ NS), a novel ratiometric fluorescent probe (RF-probe) was established for sensitively and selectively monitoring proanthocyanidins (PAs). The introduction of Ag (I) ions could enhance significantly the quantum yields (QYs, 11.1%) of AuNCs based on the synthetic method of UVI (UV irradiation) combined with MWH (microwave heating). MnO₂ NS could quench the fluorescence (FL) of Au/AgNCs mainly coming from Förster resonance energy transfer (FRET), while it could act as a nanozyme catalyst for directly catalyzing the oxidation of VB1 to produce highly fluorescent oxVB1. In the presence of PAs, MnO₂ was reduced to Mn²⁺, which caused that its quenching capacity and oxidase-like activity were vanished, thus the FL of oxVB1 and Au/AgNCs was reduced and recovered. The concentration of PAs could be monitored by the RF-probe with a linear range of 0.27-22.4 μmol L^-1 and corresponding limit of detection (LOD) and limit of quantification (LOQ) were calculated to be 75.9 and 250.5 nmol L^-1. Furthermore, the RF-probe was successfully used for the determination of PAs in mineral water, PAs additive and PAs capsule with satisfactory results compared to the standard HPLC method.

Copper nanoclusters: designed synthesis, structural diversity, and multiplatform applications

Atomically precise metal nanoclusters (MNCs) have gained tremendous research interest in recent years due to their extraordinary properties. The molecular-like properties that originate from the quantized electronic states provide novel opportunities for the construction of unique nanomaterials possessing rich molecular-like absorption, luminescence, and magnetic properties. The field of monolayer-protected metal nanoclusters, especially copper, with well-defined molecular structures and compositions, is relatively new, about two to three decades old. Nevertheless, the massive progress in the field illustrates the importance of such nanoobjects as promising materials for various applications. In this respect, nanocluster-based catalysts have become very popular, showing high efficiencies and activities for the catalytic conversion of chemical compounds. Biomedical applications of clusters are an active research field aimed at finding better fluorescent contrast agents, therapeutic pharmaceuticals for the treatment and prevention of diseases, the early diagnosis of cancers and other potent diseases, especially at early stages. A huge library of structures and the compositions of copper nanoclusters (CuNCs) with atomic precisions have already been discovered during last few decades; however, there are many concerns to be addressed and questions to be answered. Hopefully, in future, with the combined efforts of material scientists, inorganic chemists, and computational scientists, a thorough understanding of the unique molecular-like properties of metal nanoclusters will be achieved. This, on the other hand, will allow the interdisciplinary researchers to design novel catalysts, biosensors, or therapeutic agents using highly structured, atomically precise, and stable CuNCs. Thus, we hope this review will guide the reader through the field of CuNCs, while discussing the main achievements and improvements, along with challenges and drawbacks that one needs to face and overcome.

A rolling circle amplification based platform for ultrasensitive detection of heparin

Heparin has a variety of pharmacological uses, including applications for anti-tumor metastasis, anti-inflammatory and anti-viral activities and is widely used as a clinical anticoagulant. Due to its widespread applications in the clinical procedures, monitoring heparin levels is critically important to ensure the safe use of heparin and to prevent overdose and complications, such as hemorrhage and thrombocytopenia. However, traditional heparin detection relies on the measurements of the activated clotting time or activated partial thromboplastin time, which are not sufficiently reliable or accurate measurements for certain clinical settings. In this work, we describe a dumbbell probe-aided strategy for ultrasensitive and isothermal detection of heparin based on a uniquely strong protamine-heparin interaction and rolling circle amplification driven signal amplification. The detection limit for heparin is 12.5 ng mL-1 (0.83 nM), which is much lower than the therapeutic level of heparin in cardiovascular surgery (17-67 μM) and in postoperative and long-term treatment (1.7-10 μM). Additionally, the proposed sensing platform works well for heparin monitoring in human plasma samples. This simple and ultrasensitive heparin biosensor has potential application in diagnostics, therapeutics, and in biological research.

An ultra-sensitive "turn-off" fluorescent sensor for the trace detection of rifampicin based on glutathione-stabilized copper nanoclusters

Rifampicin is a common antibiotic used in human and veterinary medicine to treat tuberculosis and other diseases caused by numerous pathogenic bacteria. However, the excessive or improper use of rifampicin usually leads to a series of problems, including bacterial resistance, excessive drug-resistance and water pollution. Thus, it is of great importance to develop selective and sensitive assays for monitoring rifampicin in biological systems. In this study, we designed a fluorescence "turn-off" strategy for the trace detection of rifampicin based on a glutathione-stabilized copper nanoclusters (GSH-Cu NC) sensor. In an aqueous solution, the fluorescence of the GSH-Cu NCs at 632 nm can be quenched effectively and selectively by rifampicin due to the inner-filter effect (IFE) of fluorescence mechanism. Distinctively, this GSH-Cu NC sensor exhibited excellent fluorescence sensing capability for the trace detection of rifampicin with a very low limit of detection (LOD) of 16 pM in a wide linear range from 50 to 10 000 pM. It is not only more sensitive than the other methods previously reported for the detection of rifampicin, but also has an outstanding selectivity and strong anti-interference in complex samples. Furthermore, the as-developed GSH-Cu NCs were also successfully applied to determine rifampicin in different real samples with quantitative spike recoveries ranging from 97% to 105%.

Red-emitting GSH-Cu NCs as a triplet induced quenched fluorescent probe for fast detection of thiol pollutants

Thiol compounds exist widely on the Earth and have certain significance in the fields of the circulation of the sulfur element and industrial production. However, the odor and biological toxicity of thiol compounds make them pollutants that seriously threaten the environmental safety and the living quality of human. In this study, a novel triplet induced fluorescence "turn-off" strategy was designed for the detection of thiol pollutants via a glutathione-stabilized copper nanocluster (GSH-Cu NC) probe. The as-prepared GSH-Cu NCs not only have small size and good water-solubility, but also exhibit strong red-emitting fluorescence at 630 nm, which could be quenched quantitatively with the increase of the concentration of thiol pollutants. So they were employed to detect thioglycolic acid (TGA), 3-mercaptopropionic acid (MPA), 2-mercaptoethanol (ME) and 2-(diethylamino)ethanethiol (2-AT) in a wide linear range of 1-100 μM with detection limits of 0.73 μM, 0.43 μM, 0.37 μM, and 0.69 μM, respectively. This method was successfully applied to detect the above thiol pollutants in lake water with good recoveries. Moreover, their further application was also expanded as luminous test strips based on the excellent fluorescence characteristics of GSH-Cu NCs for fast real-time detection of thiol pollutants.

Au nanoparticles as label-free competitive reporters for sensitivity enhanced fiber-optic SPR heparin sensor

A label-free Au NPs-enhanced surface plasmon resonance (SPR) sensor was developed for the ultrasensitive detection of heparin based on competitive adsorption behavior of heparin and Au NPs on the poly (dimethyl-diallylammonium chloride) (PDDA)-modified optical fiber surface and the corresponding change in the resonance wavelength of SPR. Due to the high affinity between heparin and PDDA, the present senor shows good analytical performance with respect to heparin detection. Two obvious advantages of the proposed heparin sensor over other reported methods are: its much wider linear concentration range (10^-6-10^-10 g/mL) and lower limit of detection (0.0257 ng/mL). The analysis of heparin in serum demonstrated that the present sensor exhibited high sensitivity and selectivity. It should be noted that the sensing strategy takes advantage of a portable fiber-optic SPR sensing system and avoids the need for complex processes for labeled-Au NPs, and thus the present sensor promises to be a practical tool for the point-of-care monitoring of heparin.

An ICT-based fluorescent probe with a large Stokes shift for measuring hydrazine in biological and water samples

As a strong reductant and highly active alkali, hydrazine (N₂H₄) has been widely used in chemical industry, pharmaceutical manufacturing and agricultural production. However, its high acute toxicity poses a threat to ecosystem and human health. In the present study, a ratiometric fluorescent probe for the detection of N₂H₄ was designed, utilizing dicyanoisophorone as the fluorescent group and 4-bromobutyryl moiety as the recognition site. 4-(2-(3-(dicyanomethylene)-5,5-dimethylcyclohex-1-enyl) phenyl 4-brobutanoate (DDPB) was readily synthesized and could specially sense N₂H₄ via an intramolecular charge transfer (ICT) pathway. The cyclization cleavage reaction of N₂H₄ with a 4-bromobutyryl group released phenolic hydroxyl group and reversed the ICT process between hydroxy group and fluorophore, turning on the fluorescence in the DDPB-N₂H₄ complexes. DDPB exhibits a low cytotoxicity, reasonable cell permeability, a large Stokes shift (186 nm) and a low detection limit (86.3 nM). The quantitative determination of environmental water systems and the visualization fluorescence of DDPB test strips provides a strong evidence for the applications of DDPB. In addition, DDPB is suitable for the fluorescence imaging of exogenous N₂H₄ in HeLa cells and zebrafish.