Old drug, new use: The thalidomide-based fluorescent probe for hydrazine detection

Thalidomide, a widely used ligand for cereblon (CRBN), has been gaining attention for its targeted protein degradation. In this study, we aimed to improve the optical and biocompatible features of hydrazine fluorescent probes by a novel probe called TH-1, based on the thalidomide moiety. Our results demonstrate that TH-1 exhibits remarkable properties including significant colorimetric changes, a fast response time, excellent selectivity, and high sensitivity as a hydrazine fluorescent probe. The mechanism by which TH-1 senses hydrazine has been convincingly verified. Notably, we have successfully applied TH-1 for bioimaging of hydrazine in living A549 cells, highlighting its practical significance. Moreover, the utilization of thalidomide, a clinically approved drug, as a fluorescent skeleton has expanded the repertoire of fluorescent skeleton libraries, paving the way for further on fluorescent probes.

Advances in Optical Probes for the Detection of Hydrazine in Environmental and Biological Systems

Hydrazine, as a crucial raw material in the fine chemical industry, plays an indispensable role in fuel, catalyst, pesticide and drug synthesis. Due to its good water solubility and high toxicity, hydrazine can cause irreparable damage to water and soil in the environment, and it can also be released by taking certain drugs, which brings potential risks to human health. Therefore, it is vital to develop a method that can specifically detect hydrazine in the environment and in vivo. As an effective analysis and detection tool, fluorescence probe has attracted extensive attention in recent years. In this review, we summarized and classified hydrazine fluorescence probes based on various reaction mechanisms, and discussed their structures and applications in the past ten years. At least, we briefly outline the challenges and prospects in this field.

A nucleophilic addition-elimination based ratiometric fluorescent probe for monitoring N2H4 in biological systems and actual samples

Hydrazine (N₂H₄) is an important reagent in the field of fine chemical engineering. However, its accumulation in the environment and food chain could pose a great threat to food safety and human health. Therefore, designing a fluorescent probe with good cell penetration and high selectivity and sensitivity to detect N₂H₄ in actual samples and in vivo is a meaningful project. Herein, due to the nucleophilicity of hydrazine, we utilized naphthalimide as the fluorescence chromophore and pyrone as the recognition site to achieve the ratiometric detection of hydrazine by ring opening. In addition, we introduced the ester to improve the lipid solubility of the probe, which allowed the probe to better penetrate the cell membrane to realize the fluorescent imaging of probes in cells. Meanwhile, to our delight, the probe showed high selectivity and sensitivity to N₂H₄ in the test system, so we further applied the probe in water samples and food, in vitro and in vivo.

Naphthalene-based fluorescent probe for on-site detection of hydrazine in the environment

The widespread occurrence of hydrazine residues in the environment, including in water, soil, and organisms, is a potential health threat to humans. Therefore, the development of an efficient method for the detection of hydrazine in environmental samples is highly desirable although it poses a significant challenge. In this study, we designed and synthesized a series of naphthalene-based fluorescent dyes through structural engineering and developed a novel probe for hydrazine detection. The probe could provide a distinct fluorescence response toward hydrazine in aqueous solution with high sensitivity and selectivity. Moreover, paper-based test strips can be easily fabricated using this probe, enabling the portable on-site detection of hydrazine with the aid of a smartphone. Furthermore, we demonstrated that this probe is capable of recognizing hydrazine in various environmental samples, including water, soil, plants, and zebrafish embryos. This research provides a promising tool for the detection of hydrazine in the environment.

A novel fluorescent probe with ACQ-AIE conversion by alkyl chain engineering for simultaneous visualization of lipid droplets and lysosomes

The AIE bio-probes have attracted extensive attention because of their good brightness, long-term in situ retention ability, photostability and low cytotoxicity. Recently, the transformation of ACQ to AIE has become very popular, which is very important for the further development of AIE probes. Herein, a series of novel dyes (NR-Lyso-Ⅰ, NR-Lyso-Ⅱ, NR-Lyso-III, NR-Lyso-IV) were designed and synthesized. It was found that alkylation of 4-aminonaphthalimide could achieve the transformation of the dye from ACQ to AIE effect due to the growth of carbon chain. Moreover, the AIE probe NR-Lyso-IV exhibited dual-state emission (DSE) and large Stokes shift (＞100 nm), excellent selectivity, photostability, and low cytotoxicity, which was able to simultaneous visualize the lipid droplets (LDs) and lysosomes of HeLa cells and zebrafish.

Hydrazine High-Performance Oxidation and Sensing Using a Copper Oxide Nanosheet Electrocatalyst Prepared via a Foam-Surfactant Dual Template

This work demonstrates hydrazine electro-oxidation and sensing using an ultrathin copper oxide nanosheet (CuO-NS) architecture prepared via a versatile foam-surfactant dual template (FSDT) approach. CuO-NS was synthesised by chemical deposition of the hexagonal surfactant Brij^®58 liquid crystal template containing dissolved copper ions using hydrogen foam that was concurrently generated by a sodium borohydride reducing agent. The physical characterisations of the CuO-NS showed the formation of a two-dimensional (2D) ultrathin nanosheet architecture of crystalline CuO with a specific surface area of ~39 m²/g. The electrochemical CuO-NS oxidation and sensing performance for hydrazine oxidation revealed that the CuO nanosheets had a superior oxidation performance compared with bare-CuO, and the reported state-of-the-art catalysts had a high hydrazine sensitivity of 1.47 mA/cm² mM, a low detection limit of 15 μM (S/N = 3), and a linear concentration range of up to 45 mM. Moreover, CuO-NS shows considerable potential for the practical use of hydrazine detection in tap and bottled water samples with a good recovery achieved. Furthermore, the foam-surfactant dual template (FSDT) one-pot synthesis approach could be used to produce a wide range of nanomaterials with various compositions and nanoarchitectures at ambient conditions for boosting the electrochemical catalytic reactions.

An ICT-Based Coumarin Fluorescent Probe for the Detection of Hydrazine and Its Application in Environmental Water Samples and Organisms

As an inorganic small molecule pollutant, the toxicity and potential carcinogenicity of hydrazine (N₂H₄) are of increasing concern. In this work, A water-soluble fluorescent probe (OCYB) based on the intramolecular charge transfer (ICT) mechanism for the detection of hydrazine was designed and synthesized. Taking the advantage of 4-bromobutyryl as the recognition group, the high selectivity of OCYB to N₂H₄ was confirmed by steady-state fluorescence spectroscopy. The limit of detection (LOD) was calculated to be 78 nM in the DMSO-HEPES (pH 7.4) system. The detection mechanism was verified by NMR, HRMS and density functional theory (DFT) calculations. In addition, OCYB exhibits strong anti-interference ability and an “Off-On” fluorescence enhancement effect. Importantly, OCYB can be used to effectively monitor the fluorescence distribution of N₂H₄ in environmental water samples and organisms.

Covalent Organic Frameworks Doped with Different Ratios of OMe/OH as Fluorescent and Colorimetric Sensors

Improving the luminescence properties of covalent organic frameworks (COFs) has always been an important issue. Here, a series of COFs (([OMe]_x -TzDa (TzDa is composed only by monomerics Tz and Da, OMe represents the incorporation of monomeric Dm)) with different ratios of OMe and OH were designed and synthesized. The photochemical behavior of [OMe]_x -TzDa changed significantly due to the synergistic effect of aggregation induced emission (AIE), intramolecular charge transfer (ICT), and excited-state intramolecular proton transfer (ESIPT) effects. [OMe]₂ -TzDa, which contained a ratio of 2/1 of OMe/OH, showed the strongest fluorescence emission in water and the best linear relationship for the detection of pH. Furthermore, [OMe]₂ -TzDa was used to monitor HCl and NH₃ gases and showed a color change, visible to the naked eye. Therefore, a "confidential pigment" was successfully made. Moreover, [OMe]₂ -TzDa was also applied to detect N₂ H₄ . The work indicates the [OMe]₂ -TzDa can serve as the first fluorescence sensor to detect pH, HCl and NH₃ gases, which also shows a good response to N₂ H₄ .

Coumarin 1,4-enedione for selective detection of hydrazine in aqueous solution and fluorescence imaging in living cells

Hydrazine is a widely used but highly toxic chemical reagent, and the development of a fluorescent probe for hydrazine detection is very meaningful. In this study, a novel coumarin-derived fluorescent probe containing a 1,4-enedione moiety for hydrazine detection was developed. The recognition of hydrazine with the probe brings about obvious fluorescence enhancement over other environmentally relevant ions and amine-containing species. The limit of detection for hydrazine is 2.7×10^-8 M in aqueous solution. The fluorescence enhancement was ascribed to the cyclization reaction of the 1,4-enedione moiety of the probe and hydrazine which form a six-membered pyridazine ring and intramolecular charge transfer (ICT) mechanism. The mass spectrometry (MS), nuclear magnetic resonance (NMR) analysis and theoretical calculations confirmed the recognition produced. The probe can be used to determine trace hydrazine in real water samples. More importantly, the probe also showed good potential in detecting hydrazine by imaging of living HeLa cells.

A naphthalimide-derived hypochlorite fluorescent probe from ACQ to AIE effect transformation

In this work, by installing a free-rotating benzene ring to suppress the intermolecular π-π stacking effect in the aggregated state, a naphthalimide-derived hypochlorite (ClO^-) fluorescent probe, Probe A, with the aggregation-caused quenching (ACQ) effect was successfully transformed into Probe B possessing typical aggregation-induced emission (AIE) characteristics. The experimental results indicated that Probe B with good selectivity and a low detection limit (LOD) of 0.02 µM can also exhibit a significant ratiometric fluorescence color change from cyan to dark blue within 2 min in a nearly pure water solvent system after the addition of ClO^-. Finally, by virtue of the good photophysical properties and ClO^- sensing performance, Probe B and the Probe B loaded portable test paper were successfully applied to live cell imaging and the naked eye recognition of ClO^-, respectively.

Radical anion formation exhibiting "turn-on" fluorescence sensing of hydrazine using a naphthalene diimide (NDI) derivative with a donor-acceptor-donor (D-A-D) molecular structure

In this paper, the synthesis of a naphthalene diimide (NDI) derivative with a donor-acceptor-donor (D-A-D) molecular structure substituted with a long alkyl chain (12 carbons) containing naphthalene hydrazide at the imide position is reported. The reduced emission quantum yield (φf = 0.01-0.03) of the NDI derivative in various solvents indicates the perturbation of the electronic state of π-electron deficient NDI (A) by the peripheral naphthalene (D) units. The investigation of the influence of the alkyl chain and naphthalene substituent on the self-assembling properties of the NDI derivative reveals an isodesmic mode of self-assembly in a chloroform/methylcyclohexane (CHCl3/MCH, 1 : 9, v/v) mixture. The self-assembling nature of the NDI derivative also results in the formation of an organogel in the CHCl3/MCH (1 : 9, v/v) mixture, and gel formation is well-comprehended by techniques such as P-XRD, rheological studies, and FT-IR measurements. Furthermore, radical anion (NDI˙-) formation of π-acidic NDI was used as a sensing tool for hydrazine by a fluorescence "turn-on" (φf = 0.12) method in the solution (DMSO), film, and gel state with a detection limit of 284.1 ppb in DMSO and 32 ppb in the gel state.

A dual-response ratiometric fluorescent probe for hypochlorite and hydrazine detection and its imaging in living cells

In this work, a dual-response ratiometric fluorescent probe (E)-3-(5-(2-nitrovinyl)thiophen-2-yl)-9-phenyl-9H-carbazole (NTPC) for high selectivity and sensitivity detection of ClO^- and N₂H₄ was successfully developed. This probe NTPC showed ratiometric fluorescent response to ClO^- and N₂H₄, which induces obvious naked-eye color changes, respectively. In addition, the NTPC for ClO^- and N₂H₄ detection displayed low detection limits of 71.4 nM and 0.6 μM, respectively. And the sensing mechanism of NTPC with ClO^- and N₂H₄ was well confirmed by ¹H NMR and HR-MS spectra. Moreover, this novel probe was applied to monitoring and differentiating ClO^- and N₂H₄ in living cells, and exhibits good biocompatibility and low cytotoxicity.

A practical pH-compatible fluorescent sensor for hydrazine in soil, water and living cells

The excellent water solubility of hydrazine (N₂H₄) allows it to easily invade the human body through the skin and respiratory tract, thereby damaging human organs and the central nervous system. To realize the monitoring of N₂H₄ effectively, first, coumarin was used to construct an inner alicyclic ring as the reaction site, extending the conjugation and strengthening the rigidity of the probe Co-Hy to improve its luminescence performance and enhance its ability to resist acids and alkalis. Second, we introduced a carboxyl group at the ortho position of the inner alicyclic ring to improve the water solubility of Co-Hy, and its strong electron pulling effect increased the activity of the reaction site. Spectroscopy experiments showed that Co-Hy featured excellent water solubility, high pH resistance (pH 4-11), excellent selectivity, fast analysis speed (within 5 minutes), and a low detection limit toward N₂H₄ (69 nM, 2.2 ppb). In addition, test-strip, spray, and cell-imaging experiments confirmed the outstanding application potential of Co-Hy for convenient N₂H₄ analysis in a variety of environments.

A novel "turn-on" fluorescent probe based on hydroxy functionalized naphthalimide as a logic platform for visual recognition of H2S in environment and living cells

A novel hydroxy functionalized naphthalimide-based fluorescent probe (denoted SP2)was successfully designed and synthesized for monitoring of H₂S in living cells and environmental. In particular, SP2 can detect the H₂S without assistance of organic solvent or surfactant. When H₂S is present, the azide group in SP2 was reduced to amine group, resulting in a turn-on fluorescence signal. This remarkable properties of SP2 enable its applications in monitoring ex/endogenous H₂S in HepG-2 cells and hydrogen sulfide release in laboratories or chemical plants through visual recognition by optical color change. The probe displays highly selective and sensitive recognition to H₂S, with a low detection limit of 50.8 nM. Futhermore, this work presents the possibility of using naphthalimide-based "logic gate" platform for monitoring H₂S in biological and environmental samples.

An ICT-based fluorescent probe with a large Stokes shift for measuring hydrazine in biological and water samples

As a strong reductant and highly active alkali, hydrazine (N₂H₄) has been widely used in chemical industry, pharmaceutical manufacturing and agricultural production. However, its high acute toxicity poses a threat to ecosystem and human health. In the present study, a ratiometric fluorescent probe for the detection of N₂H₄ was designed, utilizing dicyanoisophorone as the fluorescent group and 4-bromobutyryl moiety as the recognition site. 4-(2-(3-(dicyanomethylene)-5,5-dimethylcyclohex-1-enyl) phenyl 4-brobutanoate (DDPB) was readily synthesized and could specially sense N₂H₄ via an intramolecular charge transfer (ICT) pathway. The cyclization cleavage reaction of N₂H₄ with a 4-bromobutyryl group released phenolic hydroxyl group and reversed the ICT process between hydroxy group and fluorophore, turning on the fluorescence in the DDPB-N₂H₄ complexes. DDPB exhibits a low cytotoxicity, reasonable cell permeability, a large Stokes shift (186 nm) and a low detection limit (86.3 nM). The quantitative determination of environmental water systems and the visualization fluorescence of DDPB test strips provides a strong evidence for the applications of DDPB. In addition, DDPB is suitable for the fluorescence imaging of exogenous N₂H₄ in HeLa cells and zebrafish.

A novel berberine-based colorimetric and fluorimetric probe for hydrazine detection

Hydrazine in water and soil has caused serious diseases for human health. In this work, a simple fluorescent probe (BP) for hydrazine detection was synthesized from berberine. The probe has excellent fluorescence properties and naked-eye detection.

Tetrathienylethene-based Positional Isomers with Aggregation-induced Emission Enabling Super Red-shifted Reversible Mechanochromism and Naked-eye Sensing of Hydrazine Vapor

AIE-active positional isomers, TTE-o-PhCHO, TTE-m-PhCHO and TTE-p-PhCHO, tetrathienylethene (TTE) derivates with peripherally attached ortho-/meta-/para-formyl phenyl groups, were designed and synthesized. The formyl substitution position can effectively modulate their photophysical properties, mechanochromism and fluorescent response to hydrazine. TTE-o-PhCHO and TTE-m-PhCHO exhibit remarkable AIE characteristics, and TTE-p-PhCHO possesses aggregation-induced emission enhancement performance. They all exhibit high contrast mechanochromism, and TTE-m-PhCHO shows larger red-shift (164 nm) than TTE-o-PhCHO (104 nm) and TTE-p-PhCHO (125 nm) due to the more twisted molecular conformation and much looser molecular packing. Moreover, TTE-o-PhCHO with a higher contrast color change can be used as ink-free rewritable paper. In addition, TTE-p-PhCHO, as a turn-on fluorescent probe, can selectively detect hydrazine with significant color changes that are visible by the naked eye . Therefore, the position dependence of groups would be an effective method to modulate the molecular arrangement, as well as develop AIE compounds for mechano-stimuli responsive materials, ink-free rewritable papers and chemosensors.

In situ generated chromophore as the indicator for background-free sensing strategy of hydrazine with high sensitivity with in vitro and in vivo applications

A background-free sensing assay for hydrazine was developed by using a fluorescent chromophore generated in situ as the signal indicator.

An isophorone-based NIR probe for hydrazine in real water samples and hermetic space

The role of hydrazine in production is not to be underestimated due to its strong reducibility. However, every coin has two sides.