The H2O2 Self-Sufficient 3D Printed β-TCP Scaffolds with Synergistic Anti-Tumor Effect and Reinforced Osseointegration

Tumor recurrence and massive bone defects are two critical challenges for postoperative treatment of oral and maxillofacial tumor, posing serious threats to the health of patients. Herein, in order to eliminate residual tumor cells and promote osteogenesis simultaneously, the hydrogen peroxide (H2O2) self-sufficient TCP-PDA-CaO2-CeO2 (TPCC) scaffolds are designed by preparing CaO2 or/and CeO2 nanoparticles (NPs)/chitosan solution and modifying the NPs into polydopamine (PDA)-modified 3D printed TCP scaffolds by rotary coating method. CaO2 NPs loaded on the scaffolds can release Ca2+ and sufficient H2O2 in the acidic tumor microenvironment (TME). The generated H2O2 can further produce hydroxyl radicals (·OH) under catalysis effect by peroxidase (POD) activity of CeO2 NPs, in which the photothermal effect of the PDA coating enhances its POD catalytic effect. Overall, NPs loaded on the scaffold chemically achieve a cascade reaction of H2O2 self-sufficiency and ·OH production, while functionally achieving synergistic effects on anti-tumor and bone promotion. In vitro and in vivo studies show that the scaffolds exhibit effective osteo-inductivity, induced osteoblast differentiation and promote osseointegration. Therefore, the multifunctional composite scaffolds not only validate the concept of chemo-dynamic therapy (CDT) cascade therapy, but also provide a promising clinical strategy for postoperative treatment of oral and maxillofacial tumor.

The Dual Angiogenesis Effects via Nrf2/HO-1 Signaling Pathway of Melatonin Nanocomposite Scaffold on Promoting Diabetic Bone Defect Repair

Purpose

Given the escalating prevalence of diabetes, the demand for specific bone graft materials is increasing, owing to the greater tendency towards bone defects and more difficult defect repair resulting from diabetic bone disease (DBD). Melatonin (MT), which is known for its potent antioxidant properties, has been shown to stimulate both osteogenesis and angiogenesis.

Methods

MT was formulated into MT@PLGA nanoparticles (NPs), mixed with sodium alginate (SA) hydrogel, and contained within a 3D printing polycaprolactone/β-Tricalcium phosphate (PCL/β-TCP) scaffold. The osteogenic capacity of the MT nanocomposite scaffold under diabetic conditions was demonstrated via in vitro and in vivo studies and the underlying mechanisms were investigated.

Results

Physicochemical characterization experiments confirmed the successful fabrication of the MT nanocomposite scaffold, which can achieve long-lasting sustained release of MT. The in vitro and in vivo studies demonstrated that the MT nanocomposite scaffold exhibited enhanced osteogenic capacity, which was elucidated by the dual angiogenesis effects activated through the NF-E2-related factor 2/Heme oxygenase 1 (Nrf2/HO-1) signaling pathway, including the enhancement of antioxidant enzyme activity to reduce the oxidative stress damage of vascular endothelial cells (VECs) and directly stimulating vascular endothelial growth factor (VEGF) production, which reversed the angiogenesis-osteogenesis uncoupling and promoted osteogenesis under diabetic conditions.

Conclusion

This study demonstrated the research prospective and clinical implications of the MT nanocomposite scaffold as a novel bone graft for treating bone defect and enhancing bone fusion in diabetic individuals.

Natural medicine delivery from 3D printed bone substitutes

Unmet medical needs in treating critical-size bone defects have led to the development of numerous innovative bone tissue engineering implants. Although additive manufacturing allows flexible patient-specific treatments by modifying topological properties with various materials, the development of ideal bone implants that aid new tissue regeneration and reduce post-implantation bone disorders has been limited. Natural biomolecules are gaining the attention of the health industry due to their excellent safety profiles, providing equivalent or superior performances when compared to more expensive growth factors and synthetic drugs. Supplementing additive manufacturing with natural biomolecules enables the design of novel multifunctional bone implants that provide controlled biochemical delivery for bone tissue engineering applications. Controlled release of naturally derived biomolecules from a three-dimensional (3D) printed implant may improve implant-host tissue integration, new bone formation, bone healing, and blood vessel growth. The present review introduces us to the current progress and limitations of 3D printed bone implants with drug delivery capabilities, followed by an in-depth discussion on cutting-edge technologies for incorporating natural medicinal compounds embedded within the 3D printed scaffolds or on implant surfaces, highlighting their applications in several pre- and post-implantation bone-related disorders.

Fabrication and characterization of porous, degradable, biocompatible poly(vinyl alcohol)/tannic acid/gelatin/hyaluronic acid hydrogels with good mechanical properties for cartilage tissue engineering

At present, articular cartilage repair and regeneration remain still one of the most concerned problems due to its poor self-healing capacity. Among the tissue engineering materials, hydrogel is considered an ideal candidate due to its similarity to extracellular matrices. Despite the good biocompatibility of gelatin and hyaluronic acid hydrogels, they are still limited to serve as tissue engineering materials by fast degradation rate and poor mechanical performances. In order to solve these problems, novel polyvinyl alcohol/tannic acid/gelatin/hyaluronic acid (PTGH) hydrogels are prepared by a facile physical crosslinked method. The PTGH hydrogels exhibit a high moisture content (85%) and porosity (87%). Meanwhile, the porous microstructures and mechanical properties (compressive strength: 0.85-2.59 MPa; compressive modulus: 57.88-124.27 kPa) can be controlled by adjusting the mass ratio of PT/GH. In vitro degradation analysis shows that the PTGH hydrogels can be degraded gradually in PBS solution with the presence of lysozyme. For this gel system, based on the hydrogen bonds among molecules, it improved the mechanical properties of gelatin and hyaluronic acid hydrogels. With the degradation of PTGH hydrogels, the release of gelatin and hyaluronic acid can have a continuous effort for the cartilage tissue regeneration and repair. In addition, in vitro cell culture results show that the PTGH hydrogels have no negative effects on chondrocytes growth and proliferation. In all, the PTGH hydrogels exhibit potential applications for articular cartilage tissue repair and regeneration.

Surface polydopamine modification of bone defect repair materials: Characteristics and applications

Bone defects are a common challenge for clinical orthopedic surgeons. The existing bone defect repair materials are difficult to achieve satisfactory osseointegration between the material and the bone. Therefore, it is increasingly important to find effective methods to improve the integration of the materials with the bone and thus facilitate bone defect repair. Researchers have found that polydopamine (PDA) has a structure and properties similar to the adhesive proteins secreted by mussels in nature, with good biocompatibility, bioactivity, hydrophilicity, bio-adhesion and thermal stability. PDA is therefore expected to be used as a surface modification material for bone repair materials to improve the bonding of bone repair materials to the bone surface. This paper reviews research related to PDA-modified bone repair materials and looks at their future applications.

Proliferation and differentiation study of melatonin functionalized polycaprolactone/gelatin electrospun fibrous scaffolds for nerve tissue engineering

Melatonin (MLT), a pineal neurohormone with multiple neuroprotective, is often used for peripheral nerve recovery and regenerated nerve proliferation. In this study, Polycaprolactone/Gelatin (PG) fibrous electrospun scaffolds with various percentages of MLT (0, 1, 2, and 4%wt) were fabricated for nerve cell growth, the effects of different concentrations of MLT within PG fibers (PG, PGMLT1, PGMLT2, and PGMLT4) on the proliferation and differentiation for PC12 cells were quantitatively evaluated. The microstructures and morphologies of these scaffolds were analyzed by FE-SEM and digital camera. Fourier transform infrared spectrometer (FTIR), X-ray photoelectron spectroscopy (XPS), and Water Contact Angle (WCA) were used to study the composition, ratio and properties of MLT functionalized PG scaffolds. MTT and CLSM analysis showed that appropriate amount of MLT was beneficial to the proliferation of PC12 cell. MLT can also promote cell differentiation, neurite germination, the expression levels of MAP2 mRNA and protein were dramatically increased on the composite scaffolds with the increase of MLT content, moderate addition of MLT (PGMLT2, 2%) had a prominent enhancement for neurite length. This work would provide a more comprehensive reference for further researches on MLT functionalized composite scaffolds and suggest that high-performance PGMLT fibrous scaffolds could be a promising alternative for nerve repair.

Biomaterials in bone and mineralized tissue engineering using 3D printing and bioprinting technologies

This review focuses on recently developed printable biomaterials for bone and mineralized tissue engineering. 3D printing or bioprinting is an advanced technology to design and fabricate complex functional 3D scaffolds, mimicking native tissue forin vivoapplications. We categorized the biomaterials into two main classes: 3D printing and bioprinting. Various biomaterials, including natural, synthetic biopolymers and their composites, have been studied. Biomaterial inks or bioinks used for bone and mineralized tissue regeneration include hydrogels loaded with minerals or bioceramics, cells, and growth factors. In 3D printing, the scaffold is created by acellular biomaterials (biomaterial inks), while in 3D bioprinting, cell-laden hydrogels (bioinks) are used. Two main classes of bioceramics, including bioactive and bioinert ceramics, are reviewed. Bioceramics incorporation provides osteoconductive properties and induces bone formation. Each biopolymer and mineral have its advantages and limitations. Each component of these composite biomaterials provides specific properties, and their combination can ameliorate the mechanical properties, bioactivity, or biological integration of the 3D printed scaffold. Present challenges and future approaches to address them are also discussed.

Melatonin as a Trigger of Therapeutic Bone Regenerating Capacity in Biomaterials

Bone defects are usually treated with bone grafting. Several synthetic biomaterials have emerged to replace autologous and allogeneic bone grafts, but there are still shortcomings in bone regeneration. Melatonin has demonstrated a beneficial effect on bone metabolism with the potential to treat fractures, bone defects, and osteoporosis. The hormone promoted osteogenesis, inhibited osteoclastogenesis, stimulated angiogenesis, and reduced peri-implantitis around the graft. Recently, a growing number of studies showed beneficial effects of melatonin to treat bone defects. However, cellular and molecular mechanisms involved in bone healing are still poorly understood. In this review, we recapitulate the potential mechanisms of melatonin, providing a new horizon to the clinical treatment of bone defects.

Evaluation of Polymeric Matrix Loaded with Melatonin for Wound Dressing

The development of scaffolds mimicking the extracellular matrix containing bioactive substances has great potential in tissue engineering and wound healing applications. This study investigates melatonin-a methoxyindole present in almost all biological systems. Melatonin is a bioregulator in terms of its potential clinical importance for future therapies of cutaneous diseases. Mammalian skin is not only a prominent melatonin target, but also produces and rapidly metabolizes the multifunctional methoxyindole to biologically active metabolites. In our methodology, chitosan/collagen (CTS/Coll)-contained biomaterials are blended with melatonin at different doses to fabricate biomimetic hybrid scaffolds. We use rat tail tendon- and Salmo salar fish skin-derived collagens to assess biophysical and cellular properties by (i) Fourier transform infrared spectroscopy-attenuated total reflectance (FTIR-ATR), (ii) thermogravimetric analysis (TG), (iii) scanning electron microscope (SEM), and (iv) proliferation ratio of cutaneous cells in vitro. Our results indicate that melatonin itself does not negatively affect biophysical properties of melatonin-immobilized hybrid scaffolds, but it induces a pronounced elevation of cell viability within human epidermal keratinocytes (NHEK), dermal fibroblasts (NHDF), and reference melanoma cells. These results demonstrate that this indoleamine accelerates re-epithelialization. This delivery is a promising technique for additional explorations in future dermatotherapy and protective skin medicine.

A novel multifunctional carbon aerogel-coated platform for osteosarcoma therapy and enhanced bone regeneration

Nowadays, groundbreaking strategies are urgently needed to address drug resistance, osteolysis, bone defects and other predicaments impeding the therapeutic efficacy of osteosarcoma. Among them, photothermal therapy (PTT), using systematically administrated nanoagents, exhibits attractive therapeutic efficacy, yet is powerless in bone defect regeneration. Herein, a novel multifunctional beta-tricalcium phosphate (β-Ca3(PO4)2, β-TCP) bioceramic platform-coated with carbon aerogel (CA), which was initially developed for tumor therapy, was fabricated. On account of the desirable photothermal capabilities of CA, sufficient hyperthermia is generated under the irradiation of an 808 nm laser to achieve a thorough ablation of osteosarcoma tumors. Furthermore, CA-coated surfaces provide extra roughness and a higher specific surface area, which promoted the protein recruitment ability and osteogenesis via a fibronectin (FN)-mediated signaling pathway. The photothermal therapeutic efficacy and osteogenesis capability of CA-coated β-TCP-C suggests a novel approach for the treatment of osteosarcoma and provides provoking inspiration for the prospective bio-application of CA.

Bifunctional scaffolds of hydroxyapatite/poly(dopamine)/carboxymethyl chitosan with osteogenesis and anti-osteosarcoma effect

Bifunctional scaffolds prepared by hydroxyapatite/poly(dopamine)/carboxymethyl chitosan with good osteogenesis and anti-osteosarcoma effect is promising for bone tumor therapy.