Antibacterial and Anti-Inflammatory Polysaccharide from Fructus Ligustri Lucidi Incorporated in PVA/Pectin Hydrogels Accelerate Wound Healing

In cutaneous wound healing, an overproduction of inflammatory chemokines and bacterial infections impedes the process. Hydrogels can maintain a physiologically moist microenvironment, absorb chemokines, prevent bacterial infection, inhibit bacterial reproduction, and facilitate wound healing at a wound site. The development of hydrogels provides a novel treatment strategy for the entire wound repair process. Here, a series of Fructus Ligustri Lucidi polysaccharide extracts loaded with polyvinyl alcohol (PVA) and pectin hydrogels were successfully fabricated through the freeze-thaw method. A hydrogel containing a 1% mixing weight ratio of FLL-E (named PVA-P-FLL-E1) demonstrated excellent physicochemical properties such as swellability, water retention, degradability, porosity, 00drug release, transparency, and adhesive strength. Notably, this hydrogel exhibited minimal cytotoxicity. Moreover, the crosslinked hydrogel, PVA-P-FLL-E1, displayed multifunctional attributes, including significant antibacterial properties, earlier re-epithelialization, production of few inflammatory cells, the formation of collagen fibers, deposition of collagen I, and faster remodeling of the ECM. Consequently, the PVA-P-FLL-E1 hydrogel stands out as a promising wound dressing due to its superior formulation and enhanced healing effects in wound care.

Tough Hydrogels for Load-Bearing Applications

Tough hydrogels have emerged as a promising class of materials to target load-bearing applications, where the material has to resist multiple cycles of extreme mechanical impact. A variety of chemical interactions and network architectures are used to enhance the mechanical properties and fracture mechanics of hydrogels making them stiffer and tougher. In recent years, the mechanical properties of tough, high-performance hydrogels have been benchmarked, however, this is often incomplete as important variables like water content are largely ignored. In this review, the aim is to clarify the reported mechanical properties of state-of-the-art tough hydrogels by providing a comprehensive library of fracture and mechanical property data. First, common methods for mechanical characterization of such high-performance hydrogels are introduced. Then, various modes of energy dissipation to obtain tough hydrogels are discussed and used to categorize the individual datasets helping to asses the material's (fracture) mechanical properties. Finally, current applications are considered, tough high-performance hydrogels are compared with existing materials, and promising future opportunities are discussed.

Tough, high conductivity pectin polysaccharide-based hydrogel for strain sensing and real-time information transmission

Hydrogels from natural polymers are eco-friendly, biocompatible and adjustable for manufacturing wearable sensors. However, it is still challenging to prepare natural polymer hydrogel sensors with excellent properties (e.g., high conductivity). Here, we developed a physically cross-linked, highly conductive and multifunctional hydrogel (named PPTP) to address this challenge. The natural renewable pectin-based PPTP hydrogel is synthesized by introducing tannic acid (TA), calcium chloride (CaCl2), and sodium chloride (NaCl) into the pectin/polyvinyl alcohol (PVA) dual network structure. The hydrogel exhibits excellent characteristics, including unique tensile strength (2.6155 MPa), high electrical conductivity (7 S m-1), and high sensitivity (GF = 3.75). It is also recyclable, further enhancing its eco-friendly nature. The PPTP hydrogel can be used for monitoring human joint activities, as flexible electrodes for monitoring electrocardiogram (ECG) signals, and touchable screen pen for electronic skin. Moreover, when combined with Morse code and wireless Bluetooth technology, PPTP hydrogels can be used for underwater and land information encryption, and decryption. Our unique PPTP hydrogel offers promising opportunities for medical monitoring, information transfer, and human-computer interaction.

Construction of double-network hydrogel based on low methoxy pectin/polyvinyl alcohol and its structure and properties

In this study, an interpenetrating double-network hydrogel (LMP/AA/PVAH) was prepared based on low methoxy pectin (LMP), acrylic acid (AA) and polyvinyl alcohol (PVA). The first rigid network of chemical crosslinking was constructed via free radical polymerization of LMP and AA, and the second of ductile physical crosslinking network was constructed via cyclic freeze-thaw of PVA. The first cycle hardness and elasticity of the LMP/AA/PVAH significantly increased from 13.08 N and 0 to 24.28 N and 0.79, respectively, when the second network structure was constructed in the hydrogel by PVA. Besides, the PVA network might enhance the ductile and limit the swelling of hydrogel. In addition, the adsorption properties of LMP/AA/PVAH were evaluated by adsorption of methylene blue (MB). The adsorption behavior of MB by LMP/AA/PVAH conformed to the pseudo-second-order kinetic model. Besides, after 4 cycles of adsorption, there was no significant difference in adsorption capacity of LMP/AA/PVAH. The results showed that LMP/AA/PVAH had good reusability.

Hofmeister Effect Mediated Strong PHEMA-Gelatin Hydrogel Actuator

Hydrogels have become popular in biomedical applications, but their applications in muscle and tendon-like bioactuators have been hindered by low toughness and elastic modulus. Recently, a significant toughness enhancement of a single hydrogel network has been successfully achieved by the Hofmeister effect. However, little has been conducted for the Hofmeister effect on the hybrid hydrogels, although they have a special network structure consisting of two types of polymer components. Herein we fabricated hybrid poly(2-hydroxyethyl methacrylate) (PHEMA)-gelatin hydrogels with high mechanical performance and stimuli response. An ideal bicontinuous phase separation structure of the PHEMA (rigid) and gelatin (ductile) was observed with embedded microdisc-like gelatin in the three-dimensional polymeric network of PHEMA. A significant enhancement of mechanical performance by the Hofmeister effect was attributed to the salting-out-induced stronger and closer interphase interaction between PHEMA and gelatin. A superior comprehensive mechanical performance with fracture elongation over 650%, tensile strength of 5.2 MPa, toughness of 13.5 MJ/m3, and modulus of 45.6 MPa was achieved with the salting-out effect. More specifically, the synergy of phase separation and Hofmeister effect enable the hydrogel to contract with an enhanced modulus in high-concentration salt solutions, while the same hydrogel swells and relaxes in dilute solutions, exhibiting an ionic stimulus response and excellent shape-memory properties like those of most artificial muscle. This is manifested in highly stretched, twisted, and knotted hydrogel strips that can rapidly recover their original shape in a dilute salt solution. The high strength and modulus, ionic stimuli response, and shape memory property make the hybrid hydrogel a promising material for bioactuators in various biomedical applications.

Multifunctional Injectable Hydrogel for In Vivo Diagnostic and Therapeutic Applications

Injectable hydrogels show high potential for in vivo biomedical applications owing to their distinctive mode of administration into the human body. In this study, we propose a material design strategy for developing a multifunctional injectable hydrogel with good adhesiveness, stretchability, and bioresorbability. Its multifunctionality, whereupon multiple reactions occur simultaneously during its injection into the body without requiring energy stimuli and/or additives, was realized through meticulous engineering of bioresorbable precursors based on hydrogel chemistry. The multifunctional injectable hydrogel can be administered through a minimally invasive procedure, form a conformal adhesive interface with the target tissue, dynamically stretch along with the organ motions with minimal mechanical constraints, and be resorbed in vivo after a specific period. Further, the incorporation of functional nanomaterials into the hydrogel allows for various in vivo diagnostic and therapeutic applications, without compromising the original multifunctionality of the hydrogel. These features are verified through theranostic case studies on representative organs, including the skin, liver, heart, and bladder.

An Overview on Recent Progress of the Hydrogels: From Material Resources, Properties to Functional Applications

Hydrogels, as the most typical elastomer materials with three-dimensional network structures, have attracted wide attention owing to their outstanding features in fields of sensitive stimulus response, low surface friction coefficient, good flexibility and bio-compatibility. Because of numerous fresh polymer materials (or polymerization monomers), hydrogels with various structure diversities and excellent properties are emerging, and the development of hydrogels is very vigorous over the past decade. This review focuses on state-of-the-art advances, systematically reviews the recent progress on construction of novel hydrogels utilized several kinds of typical polymerization monomers, and explores the main chemical and physical cross-linking methods to develop the diversity of hydrogels. Following the aspects mentioned above, the classification and emerging applications of hydrogels, such as pH response, ionic response, electrical response, thermal response, biomolecular response, and gas response, are extensively summarized. Finally, we have done this review with the promises and challenges for the future evolution of hydrogels and their biological applications. cross-linking methods; functional applications; hydrogels; material resources This article is protected by copyright. All rights reserved.

Wireless Power Transfer and Telemetry for Implantable Bioelectronics

Implantable bioelectronic devices are becoming useful and prospective solutions for various diseases owing to their ability to monitor or manipulate body functions. However, conventional implantable devices (e.g., pacemaker and neurostimulator) are still bulky and rigid, which is mostly due to the energy storage component. In addition to mechanical mismatch between the bulky and rigid implantable device and the soft human tissue, another significant drawback is that the entire device should be surgically replaced once the initially stored energy is exhausted. Besides, retrieving physiological information across a closed epidermis is a tricky procedure. However, wireless interfaces for power and data transfer utilizing radio frequency (RF) microwave offer a promising solution for resolving such issues. While the RF interfacing devices for power and data transfer are extensively investigated and developed using conventional electronics, their application to implantable bioelectronics is still a challenge owing to the constraints and requirements of in vivo environments, such as mechanical softness, small module size, tissue attenuation, and biocompatibility. This work elucidates the recent advances in RF-based power transfer and telemetry for implantable bioelectronics to tackle such challenges.

Flexible and biodegradable electronic implants for diagnosis and treatment of brain diseases

In the diagnosis and treatment of brain diseases, implantable devices have immense potential for intracranial sensing of brain activity and application of controlled therapy for providing feedback to the sensing. Flexible materials are preferred for implantable devices, as they can minimise implanted device-brain tissue mechanical mismatch. Moreover, biodegradable implantable devices can reduce potential immunological side-effects. Biodegradability also helps avoid the burdensome secondary surgery for retrieving the implanted device. In this study, we reviewed recent advancements related to the use of flexible and biodegradable type of implantable devices for the diagnosis and treatment of brain diseases. Representative cases of intracranial sensing and feedback therapy are introduced, and then a brief discussion concludes the review.

Renatured hydrogel painting

Hydrogel coatings pave an avenue for improving the lubricity, biocompatibility, and flexibility of solid surfaces. From the viewpoint of practical applications, this work establishes a scalable method to firmly adhere hydrogel layers to diverse solid surfaces. The strategy, termed as renatured hydrogel painting (RHP), refers to adhering dehydrated xerogel to a surface with appropriate glues, followed by the formation of a hydrogel layer after rehydration of the xerogel. With the benefits of simplicity and generality, this strategy can be readily applied to different hydrogel systems, no matter what the substrate is. Hydrogel adhesion is demonstrated by its tolerance against mechanical impact with hydrodynamic shearing at 14 m/s. This method affords powerful supplements to renew the surface chemistry and physical properties of solid substrates. In addition, we show that the RHP technique can be applied to living tissue, with potential for clinical applications such as the protection of bone tissue.

Engineering luminescent pectin-based hydrogel for highly efficient multiple sensing

Luminescent hydrogels with sensing capabilities have attracted much interest in recent years, especially those responsive to stimuli, making such materials potential for various applications. Pectin is a high-molecular-weight carbohydrate polymer that has the ability to form hydrogel upon heating or mixing with divalent cations. However, intrinsic pectin gels are weak and lack of functionalities. In this study, lanthanide ions and silk fibroin derived carbon dots were incorporated into Pectin/PVA hydrogel (PPH) to form luminescent tough hydrogels. The luminescence of the hydrogel can be tuned by adjusting the ratio of blue emission carbon dots to Eu³⁺ ions (red emission) and Tb³⁺ ions (green emission). Such incorporation of emitters only slightly changed the mechanical properties of the tough hydrogel. Notably, the luminescent Pectin/PVA hydrogel (LPPH) showed chromic response to external stimuli, like pH and metal ions. By measuring the ratio of luminescent intensity at 473 nm and 617 nm (I₄₇₃/I₆₁₇), the pH response can be quantified in high sensitivity. In addition, the specific detection of Cu²⁺ and Fe³⁺ ions using the fabricated hydrogel were demonstrated, the mechanism was also proposed. The different chromic responses to Fe²⁺ and Fe³⁺ endow the luminescent tough Pectin/PVA hydrogel potential for multiple sensing applications.