A high-strength collagen-based antimicrobial film grafted with ε-polylysine fabrication by riboflavin-mediated ultraviolet irradiation for pork preservation

In this study, a UV-cured collagen-based film (C-P-H film) with high mechanical strength and antimicrobial properties was developed by riboflavin-mediated ultraviolet irradiation of collagen solution containing histidine-modified ε-polylysine. Fourier transform infrared analysis indicated that covalent cross-linking was formed between the collagen molecule and the histidine-grafted ε-polylysine. Compared with the pure collagen film, the C-P-H film containing 5 wt% histidine-modified ε-polylysine showed higher tensile strength (145.98 MPa), higher thermal denaturation temperature (76.5 °C), lower water vapor permeability (5.54 × 10-11 g m-1 s-1 Pa) and excellent antimicrobial activities against Escherichia coli and Staphylococcus aureus. In addition, the wrapping of the C-P-H film effectively inhibited bacterial growth of pork during storage time, successfully prolonging the shelf-life of pork by approximately 4 days compared to that of plastic wrap. These results suggested that collagen-based film grafted with histidine-modified ε-polylysine via riboflavin-mediated ultraviolet irradiation process had a great potential for pork preservation.

Advances in xenogeneic donor decellularized organs: A review on studies with sheep and porcine-derived heart valves

Heart valve replacement surgeries are performed on patients suffering from abnormal heart valve function. In these operations, the problematic tissue is replaced with mechanical valves or with bioprosthetics that are being developed. The thrombotic effect of mechanical valves, reflecting the need for lifelong use of anticoagulation drugs, and the short-lived nature of biological valves make these two types of valves problematic. In addition, they cannot adapt to the somatic growth of young patients. Although decellularized scaffolds have shown some promise, a successful translation has so far evaded. Although decellularized porcine xenografts have been extensively studied in the literature, they have several disadvantages, such as a propensity for calcification in the implant model, a risk of porcine endogenous retrovirus (PERV) infection, and a high xenoantigen density. As seen in clinical data, it is clear that there are biocompatibility problems in almost all studies. However, since decellularized sheep heart valves have not been tried in the clinic, a large data pool could not be established. This review compares and contrasts decellularized porcine and sheep xenografts for heart valve tissue engineering. It reveals that decellularized sheep heart valves can be an alternative to pigs in terms of biocompatibility. In addition, it highlights the potential advantages of bioinks derived from the decellularized extracellular matrix in 3D bioprinting technology, emphasizing that they can be a new alternative for the application. We also outline the future prospects of using sheep xenografts for heart valve tissue engineering.

Corilagin functionalized decellularized extracellular matrix as artificial blood vessels with improved endothelialization and anti-inflammation by reactive oxygen species scavenging

The performance of biological-originated blood vessels in clinical remains disappointing due to fast occlusion caused by acute thrombosis or long-standing inflammation. How to prevent rapid degradation and inhibit acute inflammation but maintain their high bioactivity is still a significant challenge. As a bioactive polyphenol in various traditional Chinese medicine, Corilagin (Cor) exhibits excellent anticoagulant, anti-inflammatory and rapid ROS consumption properties. Inspired by abundant supramolecular interactions in organisms, we selected it to crosslink tissues via purely H-bonds to simulate these natural interactions without introducing potential toxic aldehyde or carboxyl groups. Results show that 2 mg/ml was selected as the optimal Cor concentration to form a stable crosslinking network (FI > 95%) and effectively delay their degradation. Cor modification not only enhances ECs adhesion and monolayer function via accelerating VEGF and TGF-β secretion but also promotes macrophage transformation from pro-inflammatory M1 phenotype to anti-inflammatory M2 ones. In vitro and ex-vivo studies implied that Cor-crosslinked samples exhibited low platelet accumulation and decreased thrombin generation. In vivo evaluation further confirmed that Cor-introducing could effectively consume ROS, thus exhibiting rapid endothelialization, suppressed inflammation and reduced mineral deposition. Overall, Cor crosslinking provided a bright future for blood vessels' long-term patency and adapted to various blood-contacting surfaces.

Recent Advances in the Modification and Improvement of Bioprosthetic Heart Valves

Valvular heart disease (VHD) has become a burden and a growing public health problem in humans, causing significant morbidity and mortality worldwide. An increasing number of patients with severe VHD need to undergo heart valve replacement surgery, and artificial heart valves are in high demand. However, allogeneic valves from donors are lacking and cannot meet clinical practice needs. A mechanical heart valve can activate the coagulation pathway after contact with blood after implantation in the cardiovascular system, leading to thrombosis. Therefore, bioprosthetic heart valves (BHVs) are still a promising way to solve this problem. However, there are still challenges in the use of BHVs. For example, their longevity is still unsatisfactory due to the defects, such as thrombosis, structural valve degeneration, calcification, insufficient re-endothelialization, and the inflammatory response. Therefore, strategies and methods are needed to effectively improve the biocompatibility and longevity of BHVs. This review describes the recent research advances in BHVs and strategies to improve their biocompatibility and longevity.

Strategies for decellularization, re-cellularIzation and crosslinking in liver bioengineering

Liver transplantation is the only definitive treatment for end-stage liver disease and its availability is restricted by organ donor shortages. The development of liver bioengineering provides the probability to create a functional alternative to reduce the gap in organ demand and supply. Decellularized liver scaffolds have been widely applied in bioengineering because they can mimic the native liver microenvironment and retain extracellular matrix (ECM) components. Multiple approaches including chemical, physical and biological methods have been developed for liver decellularization in current studies, but a full set of unified criteria has not yet been established. Each method has its advantages and drawbacks that influence the microstructure and ligand landscape of decellularized liver scaffolds. Optimizing a decellularization method to eliminate cell material while retaining as much of the ECM intact as possible is therefore important for biological scaffold applications. Furthermore, crosslinking strategies can improve the biological performance of scaffolds, including reinforcing biomechanics, delaying degradation in vivo and reducing immune rejection, which can better promote the integration of re-cellularized scaffolds with host tissue and influence the reconstruction process. In this review, we aim to present the different liver decellularization techniques, the crosslinking methods to improve scaffold characteristics with crosslinking and the preparation of soluble ECM.

A strategy for mechanically integrating robust hydrogel-tissue hybrid to promote the anti-calcification and endothelialization of bioprosthetic heart valve

Bioprosthetic heart valve (BHV) replacement has been the predominant treatment for severe heart valve diseases over decades. Most clinically available BHVs are crosslinked by glutaraldehyde (GLUT), while the high toxicity of residual GLUT could initiate calcification, severe thrombosis, and delayed endothelialization. Here, we construed a mechanically integrating robust hydrogel-tissue hybrid to improve the performance of BHVs. In particular, recombinant humanized collagen type III (rhCOLIII), which was precisely customized with anti-coagulant and pro-endothelialization bioactivity, was first incorporated into the polyvinyl alcohol (PVA)-based hydrogel via hydrogen bond interactions. Then, tannic acid was introduced to enhance the mechanical performance of PVA-based hydrogel and interfacial bonding between the hydrogel layer and bio-derived tissue due to the strong affinity for a wide range of substrates. In vitro and in vivo experimental results confirmed that the GLUT-crosslinked BHVs modified by the robust PVA-based hydrogel embedded rhCOLIII and TA possessed long-term anti-coagulant, accelerated endothelialization, mild inflammatory response and anti-calcification properties. Therefore, our mechanically integrating robust hydrogel-tissue hybrid strategy showed the potential to enhance the service function and prolong the service life of the BHVs after implantation.

Recent progress in functional modification and crosslinking of bioprosthetic heart valves

Valvular heart disease (VHD), clinically manifested as stenosis and regurgitation of native heart valve, is one of the most prevalent cardiovascular diseases with high mortality. Heart valve replacement surgery has been recognized as golden standard for the treatment of VHD. Owing to the clinical application of transcatheter heart valve replacement technic and the excellent hemodynamic performance of bioprosthetic heart valves (BHVs), implantation of BHVs has been increasing over recent years and gradually became the preferred choice for the treatment of VHD. However, BHVs might fail within 10-15 years due to structural valvular degeneration (SVD), which was greatly associated with drawbacks of glutaraldehyde crosslinked BHVs, including cytotoxicity, calcification, component degradation, mechanical failure, thrombosis and immune response. To prolong the service life of BHVs, much effort has been devoted to overcoming the drawbacks of BHVs and reducing the risk of SVD. In this review, we summarized and analyzed the research and progress on: (i) modification strategies based on glutaraldehyde crosslinked BHVs and (ii) nonglutaraldehyde crosslinking strategies for BHVs.

Re-endothelialization of Decellularized Scaffolds With Endothelial Progenitor Cell Capturing Aptamer: A New Strategy for Tissue-Engineered Heart Valve

Tissue-engineered heart valve (TEHV) is a promising alternative to current heart valve substitute. Decellularized porcine aortic heart valves (DAVs) are the most common scaffolds of TEHV. Hard to endothelialization is one of the disadvantages of DAVs. Therefore, we aimed to immobilize endothelial progenitor cell (EPC)-aptamer onto DAVs for accelerating endothelialization. In this study, three groups of scaffolds were constructed: DAVs, aptamer-immobilized DAVs (aptamer-DAVs), and glutaraldehyde crosslinked DAVs (GA-DAVs). The results of flow cytometry revealed that EPC-aptamer was specific to EPCs and was immobilized onto DAVs. Cells adhesion experiments demonstrated that EPCs adhered more tightly onto aptamer-DAVs group than other two groups of scaffolds. And cell proliferation assay indicated that EPCs seeded onto aptamer-DAVs group grew faster than DAVs group and GA-DAVs group. Moreover, dynamic capture experiment in flow conditions revealed that the number of EPCs captured by aptamer-DAVs group was more than other two groups. In conclusion, aptamer-DAVs could specifically promote adhesion and proliferation of EPCs and had ability to capture EPCs in simulated flow condition. This could promote re-endothelialization of scaffolds.

dECM based dusal-responsive vascular graft with enzyme-controlled adenine release for long-term patency

Rapid occlusion is the culprit leading to implantation failure of biological blood vessels. Although adenosine is a clinical-proven drug to overcome the problem, its short half-life and turbulent burst-release limit its direct application. Thus, a pH/temperature dual-responsive blood vessel possessed controllable long-term adenosine secretion was constructed based on acellular matrix via compact crosslinking by oxidized chondroitin sulfate (OCSA) and functionalized with apyrase and acid phosphatase. These enzymes, as adenosine micro-generators, controlled the adenosine release amount by "real-time-responding" to acidity and temperature of vascular inflammation sites. Additionally, the macrophage phenotype was switched from M1 to M2, and related factors expression proved that adenosine release was effectively regulated with the severity of inflammation. What's more, the ultra-structure for degradation resisting and endothelialization accelerating was also preserved by their "double-crosslinking". Therefore, this work suggested a new feasible strategy providing a bright future of long-term patency for transplanted blood vessels.

The Use of Collagen-Based Materials in Bone Tissue Engineering

Synthetic bone substitute materials (BSMs) are becoming the general trend, replacing autologous grafting for bone tissue engineering (BTE) in orthopedic research and clinical practice. As the main component of bone matrix, collagen type I has played a critical role in the construction of ideal synthetic BSMs for decades. Significant strides have been made in the field of collagen research, including the exploration of various collagen types, structures, and sources, the optimization of preparation techniques, modification technologies, and the manufacture of various collagen-based materials. However, the poor mechanical properties, fast degradation, and lack of osteoconductive activity of collagen-based materials caused inefficient bone replacement and limited their translation into clinical reality. In the area of BTE, so far, attempts have focused on the preparation of collagen-based biomimetic BSMs, along with other inorganic materials and bioactive substances. By reviewing the approved products on the market, this manuscript updates the latest applications of collagen-based materials in bone regeneration and highlights the potential for further development in the field of BTE over the next ten years.

Immunogenicity of decellularized extracellular matrix scaffolds: a bottleneck in tissue engineering and regenerative medicine

Tissue-engineered decellularized extracellular matrix (ECM) scaffolds hold great potential to address the donor shortage as well as immunologic rejection attributed to cells in conventional tissue/organ transplantation. Decellularization, as the key process in manufacturing ECM scaffolds, removes immunogen cell materials and significantly alleviates the immunogenicity and biocompatibility of derived scaffolds. However, the application of these bioscaffolds still confronts major immunologic challenges. This review discusses the interplay between damage-associated molecular patterns (DAMPs) and antigens as the main inducers of innate and adaptive immunity to aid in manufacturing biocompatible grafts with desirable immunogenicity. It also appraises the impact of various decellularization methodologies (i.e., apoptosis-assisted techniques) on provoking immune responses that participate in rejecting allogenic and xenogeneic decellularized scaffolds. In addition, the key research findings regarding the contribution of ECM alterations, cytotoxicity issues, graft sourcing, and implantation site to the immunogenicity of decellularized tissues/organs are comprehensively considered. Finally, it discusses practical solutions to overcome immunogenicity, including antigen masking by crosslinking, sterilization optimization, and antigen removal techniques such as selective antigen removal and sequential antigen solubilization.

Hybrid heart valves with VEGF-loaded zwitterionic hydrogel coating for improved anti-calcification and re-endothelialization

With the aging of the population in worldwide, valvular heart disease has become one of the most prominent life-threatening diseases in human health, and heart valve replacement surgery is one of the therapeutic methods for valvular heart disease. Currently, commercial bioprosthetic heart valves (BHVs) for clinical application are prepared with xenograft heart valves or pericardium crosslinked by glutaraldehyde. Due to the residual cell toxicity from glutaraldehyde, heterologous antigens, and immune response, there are still some drawbacks related to the limited lifespan of bioprosthetic heart valves, such as thrombosis, calcification, degeneration, and defectiveness of re-endothelialization. Therefore, the problems of calcification, defectiveness of re-endothelialization, and poor biocompatibility from the use of bioprosthetic heart valve need to be solved. In this study, hydrogel hybrid heart valves with improved anti-calcification and re-endothelialization were prepared by taking decellularized porcine heart valves as scaffolds following grafting with double bonds. Then, the anti-biofouling zwitterionic monomers 2-methacryloyloxyethyl phosphorylcholine (MPC) and vascular endothelial growth factor (VEGF) were utilized to obtain a hydrogel-coated hybrid heart valve (PEGDA-MPC-DHVs@VEGF). The results showed that fewer platelets and thrombi were observed on the surface of the PEGDA-MPC-DHVs@VEGF. Additionally, the PEGDA-MPC-DHVs@VEGF exhibited excellent collagen stability, biocompatibility and re-endothelialization potential. Moreover, less calcification deposition and a lower immune response were observed in the PEGDA-MPC-DHVs@VEGF compared to the glutaraldehyde-crosslinked DHVs (Glu-DHVs) after subcutaneous implantation in rats for 30 days. These studies demonstrated that the strategy of zwitterionic hydrogels loaded with VEGF may be an effective approach to improving the biocompatibility, anti-calcification and re-endothelialization of bioprosthetic heart valves.

•

A new and promising strategy of overcoming defects of bioprosthetic heart valves.

•

The zwitterionic hydrogel with VEGF is utilized to improve anti-calcification and re-endothelialization properties of heart valves.

•

The hybrid heart valves with a VEGF-loaded zwitterionic hydrogel coating exhibits excellent biocompatibility.

The hybrid crosslinking method improved the stability and anti-calcification properties of the bioprosthetic heart valves

The bioprosthetic heart valves (BHVs) are the best option for the treatment of valvular heart disease. Glutaraldehyde (Glut) is commonly used as the golden standard reagent for the crosslinking of BHVs. However, the obvious defects of Glut, including residual aldehyde toxicity, degradation and calcification, increase the probability of valve failure in vivo and motivated the exploration of alternatives. Thus, the aim of this study is to develop a non-glutaraldehyde hybrid cross-linking method composed of Neomycin Trisulfate, Polyethylene glycol diglycidyl ether and Tannic acid as a substitute for Glut, which was proven to reduce calcification, degradation, inflammation of the biomaterial. Evaluations of the crosslinked bovine pericardial included histological and ultrastructural characterization, biomechanical performance, biocompatibility and structural stability test, and in vivo anti-inflammation and anti-calcification assay by subcutaneous implantation in juvenile Sprague Dawley rats. The results revealed that the hybrid crosslinked bovine pericardial were superior to Glut crosslinked biomaterial in terms of better hydrophilicity, thermodynamics stability, hemocompatibility and cytocompatibility, higher Young’s Modulus, better stability and resistance to enzymatic hydrolysis, and lower inflammation, degradation and calcification levels in subcutaneous implants. Considering all above performances, it indicates that the hybrid cross-linking method is appropriate to replace Glut as the method for BHV preparation, and particularly this hybrid crosslinked biomaterials may be a promising candidate for next-generation BHVs.

Origin of critical nature and stability enhancement in collagen matrix based biomaterials: Comprehensive modification technologies

Collagen is the most abundant protein in animals and one of the most important extracellular matrices that chronically plays an important role in biomaterials. However, the major concern about native collagen is the lack of its thermal stability and weak resistance to proteolytic degradation. Currently, a series of modification technologies have been explored for critical nature and stability enhancement in collagen matrix-based biomaterials, and prosperously large-scale progress has been achieved. The establishment of covalent bonds among collagen noumenon has been verified assuringly to have pregnant influences on its physicochemical properties and biological properties, enlightening to discuss the disparate modification technologies on specific effects on the multihierarchical structures and pivotal performances of collagen. In this review, various existing modification methods were classified from a new perspective, scilicet whether to introduce exogenous substances, to reveal the basic scientific theories of collagen modification. Understanding the role of modification technologies in the enhancement of collagen performance is crucial for developing novel collagen-based biomaterials. Moreover, the different modification effects caused by the interaction sites between the modifier and collagen, and the structure-activity relationship between the structure of the modifier and the properties of collagen were reviewed.

Surface Modification of Decellularized Heart Valve by the POSS-PEG Hybrid Hydrogel to Prepare a Composite Scaffold Material with Anticalcification Potential

Tissue-engineered heart valves (TEHVs) are the most promising replacement for heart valve transplantation. Decellularized heart valve (DHV) is one of the most common scaffold materials for TEHVs. In actual clinical applications, the most widely used method for treating DHV is cross-linking it with glutaraldehyde, but this method could cause serious problems such as calcification. In this study, we introduced polyhedral oligomeric silsesquioxane (POSS) nanoparticles into a poly(ethylene glycol) (PEG) hydrogel to prepare a POSS-PEG hybrid hydrogel, and then coated them on the surface of DHV to prepare the composite scaffold. The chemical structures, microscopic morphologies, cell compatibilities, blood compatibilities, and anticalcification properties were further investigated. Experimental results showed that the composite scaffold had good blood compatibility and excellent cell compatibility and could promote cell adhesion and proliferation. In vivo and in vitro anticalcification experiments showed that the introduction of POSS nanoparticles could reduce the degree of calcification significantly and the composite scaffold had obvious anticalcification ability. The DHV surface-coated with the POSS-PEG hybrid hydrogel is an alternative scaffold material with anticalcification potential for an artificial heart valve, which provides an idea for the preparation of TEHVs.

Substrate stiffness regulates differentiation of induced pluripotent stem cells into heart valve endothelial cells

Substrate stiffness has been indicated as a primary determinant for stem cell fate, being capable of influencing motility, proliferation, and differentiation. Although the effects of stiffness on cardiac differentiation of human-induced pluripotent stem cells (h-iPSCs) have been reported, whether stiffness of polydimethylsiloxane-based substrates could enhance differentiation of h-iPSCs toward heart valve endothelial cells lineage (VECs) or not remains unknown. Herein, we modulated the substrate stiffness to evaluate its effect on the differentiation of h-iPSCs into valve endothelial-like cells (h-iVECs) in vitro and determine the suitable stiffness. The results revealed that VECs-related genes (PECAM1, CDH5, NFATC1, etc.) were significantly increased in h-iVECs obtained from the three substrates compared with h-iPSCs. Gene expression levels and differentiation efficiency were higher in the medium group than in the stiff and soft groups. An increase in substrate stiffness to 2.8 GPa decreased the efficiency of h-iPSCs differentiation into h-iVECs and downregulated VECs specific genes. Through mRNA sequencing, we determined the key genetic markers involved in stiffness guiding the differentiation of cardiac progenitor cells into h-iVECs. Unsupervised hierarchical clustering showed that medium stiffness were more suitable for the differentiation of h-iPSCs into h-iVECs in vitro. Moreover, this process is regulated by the WNT/Calcineurin signaling pathway. Overall, this study demonstrates how stiffness can be used to enhance the h-iVECs differentiation of iPSCs and emphasizes the importance of using substrate stiffness to accomplish a more specific and mature differentiation of h-iVECs for future therapeutic and tissue engineering valve applications. STATEMENT OF SIGNIFICANCE: Several studies have examined the stiffness-induced cell fate from pluripotent stem cells during the stage of mesoderm cell differentiation. This is the first research that rigorously examines the effect of substrate stiffness on human valve endothelial-like cells differentiation from cardiac progenitor cells. We found that the medium stiffness can increase the differentiation efficiency of h-iVECs from 40% to about 60%, and this process was regulated by the WNT/CaN signaling pathway through the activation of WNT5a. Substrate stiffness not only increases the differentiation efficiency of h-iVECs, but also improves its cellular functions such as low-density lipoprotein uptake and NO release. This study emphasizes the importance of using substrate stiffness to accomplish a more specific and mature differentiation of h-iVECs.

Hyaluronic Acid Allows Enzyme Immobilization for Applications in Biomedicine

Enzymes are proteins that control the efficiency and effectiveness of biological reactions and systems, as well as of engineered biomimetic processes. This review highlights current applications of a diverse range of enzymes for biofuel production, plastics, and chemical waste management, as well as for detergent, textile, and food production and preservation industries respectively. Challenges regarding the transposition of enzymes from their natural purpose and environment into synthetic practice are discussed. For example, temperature and pH-induced enzyme fragilities, short shelf life, low-cost efficiency, poor user-controllability, and subsequently insufficient catalytic activity were shown to decrease pertinence and profitability in large-scale production considerations. Enzyme immobilization was shown to improve and expand upon enzyme usage within a profit and impact-oriented commercial world and through enzyme-material and interfaces integration. With particular focus on the growing biomedical market, examples of enzyme immobilization within or onto hyaluronic acid (HA)-based complexes are discussed as a definable way to improve upon and/or make possible the next generation of medical undertakings. As a polysaccharide formed in every living organism, HA has proven beneficial in biomedicine for its high biocompatibility and controllable biodegradability, viscoelasticity, and hydrophilicity. Complexes developed with this molecule have been utilized to selectively deliver drugs to a desired location and at a desired rate, improve the efficiency of tissue regeneration, and serve as a viable platform for biologically accepted sensors. In similar realms of enzyme immobilization, HA’s ease in crosslinking allows the molecule to user-controllably enhance the design of a given platform in terms of both chemical and physical characteristics to thus best support successful and sustained enzyme usage. Such examples do not only demonstrate the potential of enzyme-based applications but further, emphasize future market trends and accountability.

A Well-Designed Two-Fold Crosslinked Biological Valve Leaflets with Heparin-Loaded Hydrogel Coating for Enhancing Anticoagulation, Endothelialization, and Anticalcification

Commercial biological valve leaflets (BVLs) crosslinked with Glutaraldehyde (GA) are at risk of accelerating damage and even failure, owing to high cell toxicity of GA, acute thrombosis, and calcification in...

Zwitterionic hydrogel-coated heart valves with improved endothelialization and anti-calcification properties

Valve replacement surgery is the golden standard for end-stage valvular disease due to the lack of self-repair ability. Currently, bioprosthetic heart valves (BHVs) crosslinked by glutaraldehyde (GA) have been the most popular choice in clinic, especially after the emerge of transcatheter aortic valve replacement (TAVR). Nevertheless, the lifespan of BHVs is limited due to severe calcification and deterioration. In this study, to improve the anti-calcification property of BHVs, decellularized heart valves were modified by methacrylic anhydride to introduce double bonds (MADHVs), and a hybrid hydrogel made of sulfobetaine methacrylate (SBMA) and methacrylated hyaluronic acid (MAHA) was then coated onto the surface of MADHVs. Followed by grafting of Arg-Glu-Asp-Val (REDV), an endothelial cell-affinity peptide, the BHVs with improved affinity to endothelial cell (SMHVs-REDV) was obtained. SMHVs-REDV exhibited excellent collagen stability, reliable mechanical property and superior hemocompatibility. Moreover, enhanced biocompatibility and endothelialization potential compared with GA-crosslinked BHVs were achieved. After subcutaneous implantation for 30 days, SMHVs-REDV showed significantly reduced immune response and calcification compared with GA-crosslinked BHVs. Overall, simultaneous endothelialization and anti-calcification can be realized by this strategy, which was supposed to be benefit for improving the main drawbacks for available commercial BHVs products.

Progress in cardiovascular bioprinting

Cardiovascular disease has been the leading cause of death globally for the past 15 years. Following a major cardiac disease episode, the ideal treatment would be the replacement of the damaged tissue, due to the limited regenerative capacity of cardiac tissues. However, we suffer from a chronic organ donor shortage which causes approximately 20 people to die each day waiting to receive an organ. Bioprinting of tissues and organs can potentially alleviate this burden by fabricating low cost tissue and organ replacements for cardiac patients. Clinical adoption of bioprinting in cardiovascular medicine is currently limited by the lack of systematic demonstration of its effectiveness, high costs, and the complexity of the workflow. Here, we give a concise review of progress in cardiovascular bioprinting and its components. We further discuss the challenges and future prospects of cardiovascular bioprinting in clinical applications.